# $OpenBSD: Makefile.inc,v 1.6 2002/06/19 19:13:50 pvalchev Exp $ ########################################################## ## Compile time options, These set defaults ############## ########################################################## # What mail agent should smtpfwdd use? # This must take arguments of the form: # "mailprog -f fromaddr toaddr toaddr ..." # to deliver mail. MAIL_AGENT = /usr/sbin/sendmail #MAIL_AGENT = /usr/lib/sendmail # What user and group should smtpfwdd and smtpd run as? # This MUST NOT be root, and must be a user that is "trusted" by # sendmail or whatever you are using as MAIL_AGENT above so that the user # may use the "-f" flag to specify the sender of a mail message. SMTP_USER = uucp SMTP_GROUP = daemon # smtpd and smtpfwdd generate lots of syslogs, by design. # # What log facility should smtpd and smtpfwdd use for syslogs? The # default is LOG_MAIL, which is also used by critters like sendmail. # if you don't like this and want the logs going elsewhere for easy # perusal change this to something else (like LOG_LOCAL5) and adjust # your /etc/syslog.conf file to deal with it to your liking. # # LOG_FACILITY=LOG_LOCAL5 LOG_FACILITY = LOG_MAIL # Where is the spool directory located? # This is the directory used by smtpd to chroot to and store # messages. It is the directory watched for messages by smtpfwdd. This # directory should be readable and writable only to the user specified # in SMTP_USER above. # # The chroot directory SPOOLDIR = /var/spool/smtpd # Where to store messages, relative to SPOOLDIR above. SPOOLSUBDIR = . #Use below instead of above if you don't want smtpd to chroot. This #isn't normally a good idea if security is your main goal. A nice #chroot jail may be a pain to build but should give you enough of a #warm fuzzy to make it worth your while. #SPOOLDIR = / #SPOOLSUBDIR = usr/spool/smtpd # How frequently (in seconds) should smtpfwdd wake up to check the # spool directory for new mail? POLL_TIME = 10 # What is the maximum number of children smtpfwdd should spawn at one time # when delivering messages before waiting for some to complete? This ensures # the arrival of hundreds of mail messages doesn't run you out of processes. MAXCHILDREN = 10 # Should smtpfwdd check the exit code of sendmail? smtpfwdd checks any # non-zero exit status from sendmail to see if it indicates that # sendmail thinks the message might be deliverable later. Normally # this should not be a problem, however if you are not running # sendmail as your delivery agent, or if your sendmail is broken, the # exit codes may not mean much. In such a case you may not want # smtpfwdd to retry message delivery when the mta exits indicating a # failure. Setting SENDMAIL_RETRY to 0 below will make sure smtpfwdd # never retries delivery if the MTA returns a non-zero exit # status. You probably shouldn't change this unless you are sure you # know what you are doing. SENDMAIL_RETRY = 1 # Sendmail has a feature/bug that when feeding a message to it it will # stop if a line contains only a '.'. This is suppressed in smtpfwdd # by invoking sendmail with the "-oiTrue" option if the mail agent's # name ends in the string "sendmail". If your "sendmail" isn't really # sendmail, you may not need or want this. If so, change the SENDMAIL_OITRUE # below to 0. SENDMAIL_OITRUE = 1 # Sendmail can handle addresses quoted in <> on the command line. Some # MTA's (like qmail) can't. set STRIP_QUOTES to 1 if you want smtpfwdd # to peel off the <> from mail addresses on the command line when # invoking the mta STRIP_QUOTES = 0 # How many arguments can your execv() call take at once? This can be a # conservative estimate. It determines the maximum number of # recipients at a time that MAIL_AGENT will be invoked with by # smtpfwdd. # N.B. MAXARGS must be at least 6, or 5 if SENDMAIL_OITRUE (above) is 1. # You may wish to change this to be 6 if you want your sendmail to be # invoked separately for each receipient. MAXARGS = 100 # How long (in seconds) should smtpd block on a read() call to a # connected client before giving up on the connection? READ_TIMEOUT = 600 # Should smtpd check hostnames and ip addresses of a connection # against the DNS to verify consistency, and report any inconsistencies? # Set to 0 for hostchecks, 1 for no hostchecks. Set this to 1 only if # you don't want any name lookups done. # NO_HOSTCHECKS = 1 NO_HOSTCHECKS = 0 # Smtpd's default informational status messages in the smtp dialogue # are somewhat unique and interesting (see smtpd.h). Normally these # are only seen by people telnetting to your smtp port, or debugging # mail. While the author has no shame and won't change the default # It's understandable that they aren't everyone's cup of tea. Set # VANILLA_MESSAGES below to 1 and smtp will use plain old politically # correct Sendmail/RFC 821 style status messages. VANILLA_MESSAGES = 1 # Boring.... # VANILLA_MESSAGES = 0 # smtpd checks and clobbers and potentially "evil" characters in hostnames, # and mail addresses received on FROM: and RCPT: lines. This clobbers things # like a connection from hostname `/bin/rm -rf /`@evil.org, or mail to # "| /bin/sh". It also clobbers things like 8bit chars in such things. # smtpd always clobbers the characters it doesn't like, # and syslogs a note of the fact. The options below determine whether or # not smtpd will also drop the connection. # # Beware of setting this to 1 if your receive mail from sites where # it's considered ok to put 8 bit ascii chars in message headers. # # If PARANOID_SMTP is 1, smtpd will close connection on any client # that puts characters it thinks may be evil in the smtp dialogue, # (HELO, FROM, RCPT), or in the message headers. # When PARANOID_SMTP is 0, smtpd will replace the characters it thinks # are evil and continue. # PARANOID_SMTP = 1 PARANOID_SMTP = 0 # # If PARANOID_DNS is 1, smtpd will close connection on any client that # has characters it thinks may be evil in it's hostname as found by DNS, # or any client whose DNS forward and reverse mappings are inconsistent # indicating a DNS spoof of misconfiguration. # If PARANOID_DNS is 0, smtpd will replace any evil characters it sees # continue. # PARANOID_DNS = 1 PARANOID_DNS = 0 # The check above will clobber stuff in the headers from some # non north-american localizations. # If your operating system has localization support # you can define LOCALIZATION below to be your localization. # For this to work, your operating system must support localization # with setlocale, and you must copy the appropriate localization # files into the right place in smtpd's chroot directory. # The result of this is that smtpd will use a # setlocale(LC_CTYPE, LOCALIZATION) to hopefully make sure # your normal stuff won't get clobbered. # Leave this set to 0 for no localization support. # # # SET_LOCALE = 1 # Use a setlocale call to set localization SET_LOCALE = 0 # don't include localization support at all #LOCALIZATION = lt_LN.ISO_8859-1 LOCALIZATION = C #LOCALIZATION = POSIX #LOCALIZATION = ISO-8859-1 #LOCALIZATION = KOI-8 # Some sites may wish to ensure smtpd does *not* get run with command # line options to affect the compiled-in behaviours. Set # NO_COMMANDLINE_OPTIONS to 1 to make smtpd and smtpfwdd ignore any command # line options. #NO_COMMANDLINE_OPTIONS=1 NO_COMMANDLINE_OPTIONS=0 # Smtpd does not support ESMTP's EHLO command normally, as it shouldn't # need to. According to RFC, if the EHLO is unrecognized the connecting # agent should drop back to a HELO on the second attempt (and then be # talking vanilla smtp). Unfortunately Netscape Communicator betas seem # seem to have a bug in which they simply try the EHLO again. Sigh. # setting EHLO_KLUDGE to 1 will make smtpd accept a second EHLO as a helo, # thereby kludging around this bug in Communicator. #EHLO_KLUDGE=1 EHLO_KLUDGE=0 # smtpd can check FROM and RCPT addresses, along with the connecting # host info using an address check file. This can be used to only # allow certain mail addresses on a FROM:, or certain combinations of # FROM: and RCPT from certain hosts. It can be used to prevent third # party relays, enforce outgoing address conventions, prevent outgoing # SPAM/obvious forgeries, or block incoming SPAM. Setting this to 0 will # mean that none of the address checking functionality is compiled in at # all. (meaning all of address_check.c is #ifdefed out). CHECK_ADDRESS = 1 # CHECK_ADDRESS = 0 # Set This to 1 if you are running smtpd on a Juniper firewall machine. # This enables smtpd to use juniper's trusted/untrusted interface # mechanism, allowing you to use the UNTRUSTED or TRUSTED specials # in address check rules to match based on what kind of interface # a connection arrived on. # # You must set this to 0 this on a non-juniper machine or smtpd will not # build with CHECK_ADDRESS set to 1. You will get an error about # juniper_firewall.h not existing if you forget this. # #JUNIPER_SUPPORT=1 JUNIPER_SUPPORT=0 # Use regexp's in patterns? If you have a POSIX and friends, # and you trust the regex lib enough for use, you can set USE_REGEX to # 1, this allows you to specify a pattern enclosed in "/" as a regular # POSIX/henry-spencer style extended regex for case insensitive matching # (what's between the "/" gets fed to regcomp with # REG_EXTENDED|REG_ICASE|REG_NOSUB options, then matched against) # # Note that older beasts (like SunOS 4.X) usually don't have a regex # library, so if you're using something that doesn't you should set this # to 0. # #USE_REGEX=0 USE_REGEX=1 # Enable checking namservers? with NS_MATCH set to 1, patterns of the # form NS=pattern can be used to match rules against the nameservers # and MX records of originating connections or mail addresses, rather # than the connection itself. This allows for small rules to block out # whole blocks of bozos from rogue providers such as ispam.net should # you choose to do so. i.e. # #noto_delay:NS=205.199.212.0/24 NS=205.199.2.0/24 NS=207.124.161.0/24:ALL:ALL #noto_delay:ALL:NS=205.199.212.0/24 NS=205.199.2.0/24 NS=207.124.161.0/24:ALL # # would effectively block off anything originiating from, or with a FROM: # address looking like any of it's nameservers are on one of cyberpromo.com's # addresses. # # uncomment the LD_LIBS line as well if you enable NS_MATCH unless your # resolver routines are in libc (like they are on some Linuxes) # # The NS_MATCH feature is lovingly dedicated by Bob Beck to Spamford # Wallace and ispam.net # #NS_MATCH=0 NS_MATCH=1 LD_LIBS+=-lresolv # you may or may not need this. # The rules file for address checking, if enabled, remember this file # will be in the chroot jail, so the line below probably means # /usr/spool/smtpd/etc/smtpd_check_rules, unless you changed the # chroot directory above. CHECK_FILE = /etc/smtpd_check_rules # address checking rules may want user information, gotten from an RFC # 931 style ident. This info may be passed in the environment to smtpd # (from juniperd or the tcp wrapper), or smtpd will do the ident # request itself if required. CHECK_IDENT determines the timeout (in # seconds) on an ident request. if CHECK_IDENT is 0, no ident # requests will be made by smtpd even if it sees a rule that would # normally make it perform one. # CHECK_IDENT = 0 CHECK_IDENT = 10 # If you use the address checks to block incoming mail from certain # spam sites, you can set NOTO_DELAY and DENY_DELAY below to specify # the time in seconds smtpd will go to sleep for after matching a # "noto_delay" or "deny_delay" rule. This makes your site a small # headache to the spammer since they have to wait before being denied, # instead of immediately knowing so, and proceeding on to their next # victim. # NOTO_DELAY = 0 # DENY_DELAY = 0 # NOTO_DELAY = 300 # DENY_DELAY = 300 NOTO_DELAY = 50 DENY_DELAY = 50 # Because CHECK_ADDRESS above is meant to be used as a nuisance filter # the default is to ALLOW on failure rather than deny service when no # match is found, or if something happens while attempting to match a # rule (such as a system call failure, or you make a syntax error in the # rules file). Change # CHECK_ADDRESS_DENY_ON_FAILURE to 1 to have smtpd not allow anything # not explicitly allowed by the rules. # CHECK_ADDRESS_DENY_ON_FAILURE = 1 CHECK_ADDRESS_DENY_ON_FAILURE = 0 ########################################################## ## End of compile time options. ########################## ########################################################## OPTIONS = -DMAIL_AGENT=\"$(MAIL_AGENT)\" -DSMTP_USER=\"$(SMTP_USER)\" \ -DSMTP_GROUP=\"$(SMTP_GROUP)\" \ -DLOG_FACILITY=$(LOG_FACILITY) -DVANILLA_MESSAGES=$(VANILLA_MESSAGES) \ -DSPOOLDIR=\"$(SPOOLDIR)\" -DSPOOLSUBDIR=\"$(SPOOLSUBDIR)\" \ -DPOLL_TIME=$(POLL_TIME) -DSENDMAIL_RETRY=$(SENDMAIL_RETRY) \ -DSENDMAIL_OITRUE=$(SENDMAIL_OITRUE) -DSTRIP_QUOTES=$(STRIP_QUOTES) \ -DMAXCHILDREN=$(MAXCHILDREN) -DMAXARGS=$(MAXARGS) \ -DREAD_TIMEOUT=$(READ_TIMEOUT) -DNO_HOSTCHECKS=$(NO_HOSTCHECKS) \ -DPARANOID_SMTP=$(PARANOID_SMTP) -DPARANOID_DNS=$(PARANOID_DNS) \ -DNO_COMMANDLINE_OPTIONS=$(NO_COMMANDLINE_OPTIONS) \ -DEHLO_KLUDGE=$(EHLO_KLUDGE) \ -DCHECK_ADDRESS=$(CHECK_ADDRESS) -DCHECK_FILE=\"$(CHECK_FILE)\" \ -DCHECK_ADDRESS_DENY_ON_FAILURE=$(CHECK_ADDRESS_DENY_ON_FAILURE) \ -DCHECK_IDENT=$(CHECK_IDENT) \ -DNOTO_DELAY=$(NOTO_DELAY) -DDENY_DELAY=$(DENY_DELAY) \ -DSET_LOCALE=$(SET_LOCALE) -DLOCALIZATION=\"$(LOCALIZATION)\" \ -DJUNIPER_SUPPORT=$(JUNIPER_SUPPORT) -DNS_MATCH=$(NS_MATCH) \ -DUSE_REGEX=$(USE_REGEX) CFLAGS += -DUSE_FLOCK -DUSE_MKSTEMP $(OPTIONS)