/* $OpenBSD: sys_term.c,v 1.14 1998/07/10 08:06:23 deraadt Exp $ */ /* $NetBSD: sys_term.c,v 1.9 1996/03/20 04:25:53 tls Exp $ */ /* * Copyright (c) 1989, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint #if 0 static char sccsid[] = "@(#)sys_term.c 8.4+1 (Berkeley) 5/30/95"; static char rcsid[] = "$NetBSD: sys_term.c,v 1.8 1996/02/28 20:38:21 thorpej Exp $"; #else static char rcsid[] = "$OpenBSD: sys_term.c,v 1.14 1998/07/10 08:06:23 deraadt Exp $"; #endif #endif /* not lint */ #include "telnetd.h" #include "pathnames.h" #include #include #define P __P #if defined(AUTHENTICATION) #include #endif #if defined(CRAY) || defined(__hpux) # define PARENT_DOES_UTMP #endif #ifdef NEWINIT #include int utmp_len = MAXHOSTNAMELEN; /* sizeof(init_request.host) */ #else /* NEWINIT*/ # ifdef UTMPX # include struct utmpx wtmp; # else # include struct utmp wtmp; # endif /* UTMPX */ int utmp_len = sizeof(wtmp.ut_host); # ifndef PARENT_DOES_UTMP char wtmpf[] = "/usr/adm/wtmp"; char utmpf[] = "/etc/utmp"; # else /* PARENT_DOES_UTMP */ char wtmpf[] = "/etc/wtmp"; # endif /* PARENT_DOES_UTMP */ # ifdef CRAY #include #include # if (UNICOS_LVL == '7.0') || (UNICOS_LVL == '7.1') # define UNICOS7x # endif # ifdef UNICOS7x #include #include extern int secflag; extern struct sysv sysv; # endif /* UNICOS7x */ # endif /* CRAY */ #endif /* NEWINIT */ #ifdef STREAMSPTY #include #include #endif #define SCPYN(a, b) (void) strncpy(a, b, sizeof(a)) #define SCMPN(a, b) strncmp(a, b, sizeof(a)) #ifdef STREAMS #include #endif #ifdef __hpux #include #include #endif #include #ifdef t_erase #undef t_erase #undef t_kill #undef t_intrc #undef t_quitc #undef t_startc #undef t_stopc #undef t_eofc #undef t_brkc #undef t_suspc #undef t_dsuspc #undef t_rprntc #undef t_flushc #undef t_werasc #undef t_lnextc #endif #if defined(UNICOS5) && defined(CRAY2) && !defined(EXTPROC) # define EXTPROC 0400 #endif #ifndef USE_TERMIO struct termbuf { struct sgttyb sg; struct tchars tc; struct ltchars ltc; int state; int lflags; } termbuf, termbuf2; # define cfsetospeed(tp, val) (tp)->sg.sg_ospeed = (val) # define cfsetispeed(tp, val) (tp)->sg.sg_ispeed = (val) # define cfgetospeed(tp) (tp)->sg.sg_ospeed # define cfgetispeed(tp) (tp)->sg.sg_ispeed #else /* USE_TERMIO */ # ifdef SYSV_TERMIO # define termios termio # endif # ifndef TCSANOW # ifdef TCSETS # define TCSANOW TCSETS # define TCSADRAIN TCSETSW # define tcgetattr(f, t) ioctl(f, TCGETS, (char *)t) # else # ifdef TCSETA # define TCSANOW TCSETA # define TCSADRAIN TCSETAW # define tcgetattr(f, t) ioctl(f, TCGETA, (char *)t) # else # define TCSANOW TIOCSETA # define TCSADRAIN TIOCSETAW # define tcgetattr(f, t) ioctl(f, TIOCGETA, (char *)t) # endif # endif # define tcsetattr(f, a, t) ioctl(f, a, t) # define cfsetospeed(tp, val) (tp)->c_cflag &= ~CBAUD; \ (tp)->c_cflag |= (val) # define cfgetospeed(tp) ((tp)->c_cflag & CBAUD) # ifdef CIBAUD # define cfsetispeed(tp, val) (tp)->c_cflag &= ~CIBAUD; \ (tp)->c_cflag |= ((val)<c_cflag & CIBAUD)>>IBSHIFT) # else # define cfsetispeed(tp, val) (tp)->c_cflag &= ~CBAUD; \ (tp)->c_cflag |= (val) # define cfgetispeed(tp) ((tp)->c_cflag & CBAUD) # endif # endif /* TCSANOW */ struct termios termbuf, termbuf2; /* pty control structure */ # ifdef STREAMSPTY int ttyfd = -1; # endif #endif /* USE_TERMIO */ int cleanopen P((char *)); void scrub_env P((void)); /* * init_termbuf() * copy_termbuf(cp) * set_termbuf() * * These three routines are used to get and set the "termbuf" structure * to and from the kernel. init_termbuf() gets the current settings. * copy_termbuf() hands in a new "termbuf" to write to the kernel, and * set_termbuf() writes the structure into the kernel. */ void init_termbuf() { #ifndef USE_TERMIO (void) ioctl(pty, TIOCGETP, (char *)&termbuf.sg); (void) ioctl(pty, TIOCGETC, (char *)&termbuf.tc); (void) ioctl(pty, TIOCGLTC, (char *)&termbuf.ltc); # ifdef TIOCGSTATE (void) ioctl(pty, TIOCGSTATE, (char *)&termbuf.state); # endif #else # ifdef STREAMSPTY (void) tcgetattr(ttyfd, &termbuf); # else (void) tcgetattr(pty, &termbuf); # endif #endif termbuf2 = termbuf; } #if defined(LINEMODE) && defined(TIOCPKT_IOCTL) void copy_termbuf(cp, len) char *cp; int len; { if (len > sizeof(termbuf)) len = sizeof(termbuf); memmove((void *)&termbuf, cp, len); termbuf2 = termbuf; } #endif /* defined(LINEMODE) && defined(TIOCPKT_IOCTL) */ void set_termbuf() { /* * Only make the necessary changes. */ #ifndef USE_TERMIO if (memcmp((void *)&termbuf.sg, (void *)&termbuf2.sg, sizeof(termbuf.sg))) (void) ioctl(pty, TIOCSETN, (char *)&termbuf.sg); if (memcmp((void *)&termbuf.tc, (void *)&termbuf2.tc, sizeof(termbuf.tc))) (void) ioctl(pty, TIOCSETC, (char *)&termbuf.tc); if (memcmp((void *)&termbuf.ltc, (void *)&termbuf2.ltc, sizeof(termbuf.ltc))) (void) ioctl(pty, TIOCSLTC, (char *)&termbuf.ltc); if (termbuf.lflags != termbuf2.lflags) (void) ioctl(pty, TIOCLSET, (char *)&termbuf.lflags); #else /* USE_TERMIO */ if (memcmp((void *)&termbuf, (void *)&termbuf2, sizeof(termbuf))) # ifdef STREAMSPTY (void) tcsetattr(ttyfd, TCSANOW, &termbuf); # else (void) tcsetattr(pty, TCSANOW, &termbuf); # endif # if defined(CRAY2) && defined(UNICOS5) needtermstat = 1; # endif #endif /* USE_TERMIO */ } /* * spcset(func, valp, valpp) * * This function takes various special characters (func), and * sets *valp to the current value of that character, and * *valpp to point to where in the "termbuf" structure that * value is kept. * * It returns the SLC_ level of support for this function. */ #ifndef USE_TERMIO int spcset(func, valp, valpp) int func; cc_t *valp; cc_t **valpp; { switch(func) { case SLC_EOF: *valp = termbuf.tc.t_eofc; *valpp = (cc_t *)&termbuf.tc.t_eofc; return(SLC_VARIABLE); case SLC_EC: *valp = termbuf.sg.sg_erase; *valpp = (cc_t *)&termbuf.sg.sg_erase; return(SLC_VARIABLE); case SLC_EL: *valp = termbuf.sg.sg_kill; *valpp = (cc_t *)&termbuf.sg.sg_kill; return(SLC_VARIABLE); case SLC_IP: *valp = termbuf.tc.t_intrc; *valpp = (cc_t *)&termbuf.tc.t_intrc; return(SLC_VARIABLE|SLC_FLUSHIN|SLC_FLUSHOUT); case SLC_ABORT: *valp = termbuf.tc.t_quitc; *valpp = (cc_t *)&termbuf.tc.t_quitc; return(SLC_VARIABLE|SLC_FLUSHIN|SLC_FLUSHOUT); case SLC_XON: *valp = termbuf.tc.t_startc; *valpp = (cc_t *)&termbuf.tc.t_startc; return(SLC_VARIABLE); case SLC_XOFF: *valp = termbuf.tc.t_stopc; *valpp = (cc_t *)&termbuf.tc.t_stopc; return(SLC_VARIABLE); case SLC_AO: *valp = termbuf.ltc.t_flushc; *valpp = (cc_t *)&termbuf.ltc.t_flushc; return(SLC_VARIABLE); case SLC_SUSP: *valp = termbuf.ltc.t_suspc; *valpp = (cc_t *)&termbuf.ltc.t_suspc; return(SLC_VARIABLE); case SLC_EW: *valp = termbuf.ltc.t_werasc; *valpp = (cc_t *)&termbuf.ltc.t_werasc; return(SLC_VARIABLE); case SLC_RP: *valp = termbuf.ltc.t_rprntc; *valpp = (cc_t *)&termbuf.ltc.t_rprntc; return(SLC_VARIABLE); case SLC_LNEXT: *valp = termbuf.ltc.t_lnextc; *valpp = (cc_t *)&termbuf.ltc.t_lnextc; return(SLC_VARIABLE); case SLC_FORW1: *valp = termbuf.tc.t_brkc; *valpp = (cc_t *)&termbuf.ltc.t_lnextc; return(SLC_VARIABLE); case SLC_BRK: case SLC_SYNCH: case SLC_AYT: case SLC_EOR: *valp = (cc_t)0; *valpp = (cc_t *)0; return(SLC_DEFAULT); default: *valp = (cc_t)0; *valpp = (cc_t *)0; return(SLC_NOSUPPORT); } } #else /* USE_TERMIO */ int spcset(func, valp, valpp) int func; cc_t *valp; cc_t **valpp; { #define setval(a, b) *valp = termbuf.c_cc[a]; \ *valpp = &termbuf.c_cc[a]; \ return(b); #define defval(a) *valp = ((cc_t)a); *valpp = (cc_t *)0; return(SLC_DEFAULT); switch(func) { case SLC_EOF: setval(VEOF, SLC_VARIABLE); case SLC_EC: setval(VERASE, SLC_VARIABLE); case SLC_EL: setval(VKILL, SLC_VARIABLE); case SLC_IP: setval(VINTR, SLC_VARIABLE|SLC_FLUSHIN|SLC_FLUSHOUT); case SLC_ABORT: setval(VQUIT, SLC_VARIABLE|SLC_FLUSHIN|SLC_FLUSHOUT); case SLC_XON: #ifdef VSTART setval(VSTART, SLC_VARIABLE); #else defval(0x13); #endif case SLC_XOFF: #ifdef VSTOP setval(VSTOP, SLC_VARIABLE); #else defval(0x11); #endif case SLC_EW: #ifdef VWERASE setval(VWERASE, SLC_VARIABLE); #else defval(0); #endif case SLC_RP: #ifdef VREPRINT setval(VREPRINT, SLC_VARIABLE); #else defval(0); #endif case SLC_LNEXT: #ifdef VLNEXT setval(VLNEXT, SLC_VARIABLE); #else defval(0); #endif case SLC_AO: #if !defined(VDISCARD) && defined(VFLUSHO) # define VDISCARD VFLUSHO #endif #ifdef VDISCARD setval(VDISCARD, SLC_VARIABLE|SLC_FLUSHOUT); #else defval(0); #endif case SLC_SUSP: #ifdef VSUSP setval(VSUSP, SLC_VARIABLE|SLC_FLUSHIN); #else defval(0); #endif #ifdef VEOL case SLC_FORW1: setval(VEOL, SLC_VARIABLE); #endif #ifdef VEOL2 case SLC_FORW2: setval(VEOL2, SLC_VARIABLE); #endif case SLC_AYT: #ifdef VSTATUS setval(VSTATUS, SLC_VARIABLE); #else defval(0); #endif case SLC_BRK: case SLC_SYNCH: case SLC_EOR: defval(0); default: *valp = 0; *valpp = 0; return(SLC_NOSUPPORT); } } #endif /* USE_TERMIO */ #ifdef CRAY /* * getnpty() * * Return the number of pty's configured into the system. */ int getnpty() { #ifdef _SC_CRAY_NPTY int numptys; if ((numptys = sysconf(_SC_CRAY_NPTY)) != -1) return numptys; else #endif /* _SC_CRAY_NPTY */ return 128; } #endif /* CRAY */ #ifndef convex /* * getpty() * * Allocate a pty. As a side effect, the external character * array "line" contains the name of the slave side. * * Returns the file descriptor of the opened pty. */ #ifndef __GNUC__ char *line = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"; #else static char Xline[] = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"; char *line = Xline; #endif #ifdef CRAY char *myline = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"; #endif /* CRAY */ int getpty(ptynum) int *ptynum; { register int p; #ifdef STREAMSPTY int t; char *ptsname(); p = open("/dev/ptmx", 2); if (p > 0) { grantpt(p); unlockpt(p); strcpy(line, ptsname(p)); return(p); } #else /* ! STREAMSPTY */ #ifndef CRAY register char *cp, *p1, *p2; register int i; #if defined(sun) && defined(TIOCGPGRP) && BSD < 199207 int dummy; #endif #ifndef __hpux (void) sprintf(line, "/dev/ptyXX"); p1 = &line[8]; p2 = &line[9]; #else (void) sprintf(line, "/dev/ptym/ptyXX"); p1 = &line[13]; p2 = &line[14]; #endif for (cp = "pqrstuvwxyzPQRST"; *cp; cp++) { struct stat stb; *p1 = *cp; *p2 = '0'; /* * This stat() check is just to keep us from * looping through all 256 combinations if there * aren't that many ptys available. */ if (stat(line, &stb) < 0) break; for (i = 0; i < 16; i++) { *p2 = "0123456789abcdef"[i]; p = open(line, 2); if (p > 0) { #ifndef __hpux line[5] = 't'; #else for (p1 = &line[8]; *p1; p1++) *p1 = *(p1+1); line[9] = 't'; #endif chown(line, 0, 0); chmod(line, 0600); #if defined(sun) && defined(TIOCGPGRP) && BSD < 199207 if (ioctl(p, TIOCGPGRP, &dummy) == 0 || errno != EIO) { chmod(line, 0666); close(p); line[5] = 'p'; } else #endif /* defined(sun) && defined(TIOCGPGRP) && BSD < 199207 */ return(p); } } } #else /* CRAY */ extern lowpty, highpty; struct stat sb; for (*ptynum = lowpty; *ptynum <= highpty; (*ptynum)++) { (void) sprintf(myline, "/dev/pty/%03d", *ptynum); p = open(myline, 2); if (p < 0) continue; (void) sprintf(line, "/dev/ttyp%03d", *ptynum); /* * Here are some shenanigans to make sure that there * are no listeners lurking on the line. */ if(stat(line, &sb) < 0) { (void) close(p); continue; } if(sb.st_uid || sb.st_gid || sb.st_mode != 0600) { chown(line, 0, 0); chmod(line, 0600); (void)close(p); p = open(myline, 2); if (p < 0) continue; } /* * Now it should be safe...check for accessability. */ if (access(line, 6) == 0) return(p); else { /* no tty side to pty so skip it */ (void) close(p); } } #endif /* CRAY */ #endif /* STREAMSPTY */ return(-1); } #endif /* convex */ #ifdef LINEMODE /* * tty_flowmode() Find out if flow control is enabled or disabled. * tty_linemode() Find out if linemode (external processing) is enabled. * tty_setlinemod(on) Turn on/off linemode. * tty_isecho() Find out if echoing is turned on. * tty_setecho(on) Enable/disable character echoing. * tty_israw() Find out if terminal is in RAW mode. * tty_binaryin(on) Turn on/off BINARY on input. * tty_binaryout(on) Turn on/off BINARY on output. * tty_isediting() Find out if line editing is enabled. * tty_istrapsig() Find out if signal trapping is enabled. * tty_setedit(on) Turn on/off line editing. * tty_setsig(on) Turn on/off signal trapping. * tty_issofttab() Find out if tab expansion is enabled. * tty_setsofttab(on) Turn on/off soft tab expansion. * tty_islitecho() Find out if typed control chars are echoed literally * tty_setlitecho() Turn on/off literal echo of control chars * tty_tspeed(val) Set transmit speed to val. * tty_rspeed(val) Set receive speed to val. */ #ifdef convex static int linestate; #endif int tty_linemode() { #ifndef convex #ifndef USE_TERMIO return(termbuf.state & TS_EXTPROC); #else return(termbuf.c_lflag & EXTPROC); #endif #else return(linestate); #endif } void tty_setlinemode(on) int on; { #ifdef TIOCEXT # ifndef convex set_termbuf(); # else linestate = on; # endif (void) ioctl(pty, TIOCEXT, (char *)&on); # ifndef convex init_termbuf(); # endif #else /* !TIOCEXT */ # ifdef EXTPROC if (on) termbuf.c_lflag |= EXTPROC; else termbuf.c_lflag &= ~EXTPROC; # endif #endif /* TIOCEXT */ } #endif /* LINEMODE */ int tty_isecho() { #ifndef USE_TERMIO return (termbuf.sg.sg_flags & ECHO); #else return (termbuf.c_lflag & ECHO); #endif } int tty_flowmode() { #ifndef USE_TERMIO return(((termbuf.tc.t_startc) > 0 && (termbuf.tc.t_stopc) > 0) ? 1 : 0); #else return((termbuf.c_iflag & IXON) ? 1 : 0); #endif } int tty_restartany() { #ifndef USE_TERMIO # ifdef DECCTQ return((termbuf.lflags & DECCTQ) ? 0 : 1); # else return(-1); # endif #else return((termbuf.c_iflag & IXANY) ? 1 : 0); #endif } void tty_setecho(on) int on; { #ifndef USE_TERMIO if (on) termbuf.sg.sg_flags |= ECHO|CRMOD; else termbuf.sg.sg_flags &= ~(ECHO|CRMOD); #else if (on) termbuf.c_lflag |= ECHO; else termbuf.c_lflag &= ~ECHO; #endif } int tty_israw() { #ifndef USE_TERMIO return(termbuf.sg.sg_flags & RAW); #else return(!(termbuf.c_lflag & ICANON)); #endif } #if defined (AUTHENTICATION) && defined(NO_LOGIN_F) && defined(LOGIN_R) int tty_setraw(on) { # ifndef USE_TERMIO if (on) termbuf.sg.sg_flags |= RAW; else termbuf.sg.sg_flags &= ~RAW; # else if (on) termbuf.c_lflag &= ~ICANON; else termbuf.c_lflag |= ICANON; # endif } #endif void tty_binaryin(on) int on; { #ifndef USE_TERMIO if (on) termbuf.lflags |= LPASS8; else termbuf.lflags &= ~LPASS8; #else if (on) { termbuf.c_iflag &= ~ISTRIP; } else { termbuf.c_iflag |= ISTRIP; } #endif } void tty_binaryout(on) int on; { #ifndef USE_TERMIO if (on) termbuf.lflags |= LLITOUT; else termbuf.lflags &= ~LLITOUT; #else if (on) { termbuf.c_cflag &= ~(CSIZE|PARENB); termbuf.c_cflag |= CS8; termbuf.c_oflag &= ~OPOST; } else { termbuf.c_cflag &= ~CSIZE; termbuf.c_cflag |= CS7|PARENB; termbuf.c_oflag |= OPOST; } #endif } int tty_isbinaryin() { #ifndef USE_TERMIO return(termbuf.lflags & LPASS8); #else return(!(termbuf.c_iflag & ISTRIP)); #endif } int tty_isbinaryout() { #ifndef USE_TERMIO return(termbuf.lflags & LLITOUT); #else return(!(termbuf.c_oflag&OPOST)); #endif } #ifdef LINEMODE int tty_isediting() { #ifndef USE_TERMIO return(!(termbuf.sg.sg_flags & (CBREAK|RAW))); #else return(termbuf.c_lflag & ICANON); #endif } int tty_istrapsig() { #ifndef USE_TERMIO return(!(termbuf.sg.sg_flags&RAW)); #else return(termbuf.c_lflag & ISIG); #endif } void tty_setedit(on) int on; { #ifndef USE_TERMIO if (on) termbuf.sg.sg_flags &= ~CBREAK; else termbuf.sg.sg_flags |= CBREAK; #else if (on) termbuf.c_lflag |= ICANON; else termbuf.c_lflag &= ~ICANON; #endif } void tty_setsig(on) int on; { #ifndef USE_TERMIO if (on) ; #else if (on) termbuf.c_lflag |= ISIG; else termbuf.c_lflag &= ~ISIG; #endif } #endif /* LINEMODE */ int tty_issofttab() { #ifndef USE_TERMIO return (termbuf.sg.sg_flags & XTABS); #else # ifdef OXTABS return (termbuf.c_oflag & OXTABS); # endif # ifdef TABDLY return ((termbuf.c_oflag & TABDLY) == TAB3); # endif #endif } void tty_setsofttab(on) int on; { #ifndef USE_TERMIO if (on) termbuf.sg.sg_flags |= XTABS; else termbuf.sg.sg_flags &= ~XTABS; #else if (on) { # ifdef OXTABS termbuf.c_oflag |= OXTABS; # endif # ifdef TABDLY termbuf.c_oflag &= ~TABDLY; termbuf.c_oflag |= TAB3; # endif } else { # ifdef OXTABS termbuf.c_oflag &= ~OXTABS; # endif # ifdef TABDLY termbuf.c_oflag &= ~TABDLY; termbuf.c_oflag |= TAB0; # endif } #endif } int tty_islitecho() { #ifndef USE_TERMIO return (!(termbuf.lflags & LCTLECH)); #else # ifdef ECHOCTL return (!(termbuf.c_lflag & ECHOCTL)); # endif # ifdef TCTLECH return (!(termbuf.c_lflag & TCTLECH)); # endif # if !defined(ECHOCTL) && !defined(TCTLECH) return (0); /* assumes ctl chars are echoed '^x' */ # endif #endif } void tty_setlitecho(on) int on; { #ifndef USE_TERMIO if (on) termbuf.lflags &= ~LCTLECH; else termbuf.lflags |= LCTLECH; #else # ifdef ECHOCTL if (on) termbuf.c_lflag &= ~ECHOCTL; else termbuf.c_lflag |= ECHOCTL; # endif # ifdef TCTLECH if (on) termbuf.c_lflag &= ~TCTLECH; else termbuf.c_lflag |= TCTLECH; # endif #endif } int tty_iscrnl() { #ifndef USE_TERMIO return (termbuf.sg.sg_flags & CRMOD); #else return (termbuf.c_iflag & ICRNL); #endif } /* * Try to guess whether speeds are "encoded" (4.2BSD) or just numeric (4.4BSD). */ #if B4800 != 4800 #define DECODE_BAUD #endif #ifdef DECODE_BAUD /* * A table of available terminal speeds */ struct termspeeds { int speed; int value; } termspeeds[] = { { 0, B0 }, { 50, B50 }, { 75, B75 }, { 110, B110 }, { 134, B134 }, { 150, B150 }, { 200, B200 }, { 300, B300 }, { 600, B600 }, { 1200, B1200 }, { 1800, B1800 }, { 2400, B2400 }, { 4800, B4800 }, #ifdef B7200 { 7200, B7200 }, #endif { 9600, B9600 }, #ifdef B14400 { 14400, B14400 }, #endif #ifdef B19200 { 19200, B19200 }, #endif #ifdef B28800 { 28800, B28800 }, #endif #ifdef B38400 { 38400, B38400 }, #endif #ifdef B57600 { 57600, B57600 }, #endif #ifdef B115200 { 115200, B115200 }, #endif #ifdef B230400 { 230400, B230400 }, #endif { -1, 0 } }; #endif /* DECODE_BUAD */ void tty_tspeed(val) int val; { #ifdef DECODE_BAUD register struct termspeeds *tp; for (tp = termspeeds; (tp->speed != -1) && (val > tp->speed); tp++) ; if (tp->speed == -1) /* back up to last valid value */ --tp; cfsetospeed(&termbuf, tp->value); #else /* DECODE_BUAD */ cfsetospeed(&termbuf, val); #endif /* DECODE_BUAD */ } void tty_rspeed(val) int val; { #ifdef DECODE_BAUD register struct termspeeds *tp; for (tp = termspeeds; (tp->speed != -1) && (val > tp->speed); tp++) ; if (tp->speed == -1) /* back up to last valid value */ --tp; cfsetispeed(&termbuf, tp->value); #else /* DECODE_BAUD */ cfsetispeed(&termbuf, val); #endif /* DECODE_BAUD */ } #if defined(CRAY2) && defined(UNICOS5) int tty_isnewmap() { return((termbuf.c_oflag & OPOST) && (termbuf.c_oflag & ONLCR) && !(termbuf.c_oflag & ONLRET)); } #endif #ifdef PARENT_DOES_UTMP # ifndef NEWINIT extern struct utmp wtmp; extern char wtmpf[]; # else /* NEWINIT */ int gotalarm; /* ARGSUSED */ void nologinproc(sig) int sig; { gotalarm++; } # endif /* NEWINIT */ #endif /* PARENT_DOES_UTMP */ #ifndef NEWINIT # ifdef PARENT_DOES_UTMP extern void utmp_sig_init P((void)); extern void utmp_sig_reset P((void)); extern void utmp_sig_wait P((void)); extern void utmp_sig_notify P((int)); # endif /* PARENT_DOES_UTMP */ #endif /* * getptyslave() * * Open the slave side of the pty, and do any initialization * that is necessary. */ void getptyslave() { register int t = -1; #if !defined(CRAY) || !defined(NEWINIT) # ifdef LINEMODE int waslm; # endif # ifdef TIOCGWINSZ struct winsize ws; extern int def_row, def_col; # endif extern int def_tspeed, def_rspeed; /* * Opening the slave side may cause initilization of the * kernel tty structure. We need remember the state of * if linemode was turned on * terminal window size * terminal speed * so that we can re-set them if we need to. */ # ifdef LINEMODE waslm = tty_linemode(); # endif /* * Make sure that we don't have a controlling tty, and * that we are the session (process group) leader. */ # ifdef TIOCNOTTY t = open(_PATH_TTY, O_RDWR); if (t >= 0) { (void) ioctl(t, TIOCNOTTY, (char *)0); (void) close(t); } # endif # ifdef PARENT_DOES_UTMP /* * Wait for our parent to get the utmp stuff to get done. */ utmp_sig_wait(); # endif t = cleanopen(line); if (t < 0) fatalperror(net, line); #ifdef STREAMSPTY #ifdef USE_TERMIO ttyfd = t; #endif if (ioctl(t, I_PUSH, "ptem") < 0) fatal(net, "I_PUSH ptem"); if (ioctl(t, I_PUSH, "ldterm") < 0) fatal(net, "I_PUSH ldterm"); if (ioctl(t, I_PUSH, "ttcompat") < 0) fatal(net, "I_PUSH ttcompat"); if (ioctl(pty, I_PUSH, "pckt") < 0) fatal(net, "I_PUSH pckt"); #endif /* * set up the tty modes as we like them to be. */ init_termbuf(); # ifdef TIOCGWINSZ if (def_row || def_col) { memset((void *)&ws, 0, sizeof(ws)); ws.ws_col = def_col; ws.ws_row = def_row; (void)ioctl(t, TIOCSWINSZ, (char *)&ws); } # endif /* * Settings for sgtty based systems */ # ifndef USE_TERMIO termbuf.sg.sg_flags |= CRMOD|ANYP|ECHO|XTABS; # endif /* USE_TERMIO */ /* * Settings for UNICOS (and HPUX) */ # if defined(CRAY) || defined(__hpux) termbuf.c_oflag = OPOST|ONLCR|TAB3; termbuf.c_iflag = IGNPAR|ISTRIP|ICRNL|IXON; termbuf.c_lflag = ISIG|ICANON|ECHO|ECHOE|ECHOK; termbuf.c_cflag = EXTB|HUPCL|CS8; # endif /* * Settings for all other termios/termio based * systems, other than 4.4BSD. In 4.4BSD the * kernel does the initial terminal setup. */ # if defined(USE_TERMIO) && !(defined(CRAY) || defined(__hpux)) && (BSD <= 43) # ifndef OXTABS # define OXTABS 0 # endif termbuf.c_lflag |= ECHO; termbuf.c_oflag |= ONLCR|OXTABS; termbuf.c_iflag |= ICRNL; termbuf.c_iflag &= ~IXOFF; # endif /* defined(USE_TERMIO) && !defined(CRAY) && (BSD <= 43) */ tty_rspeed((def_rspeed > 0) ? def_rspeed : 9600); tty_tspeed((def_tspeed > 0) ? def_tspeed : 9600); # ifdef LINEMODE if (waslm) tty_setlinemode(1); # endif /* LINEMODE */ /* * Set the tty modes, and make this our controlling tty. */ set_termbuf(); if (login_tty(t) == -1) fatalperror(net, "login_tty"); #endif /* !defined(CRAY) || !defined(NEWINIT) */ if (net > 2) (void) close(net); #if defined(AUTHENTICATION) && defined(NO_LOGIN_F) && defined(LOGIN_R) /* * Leave the pty open so that we can write out the rlogin * protocol for /bin/login, if the authentication works. */ #else if (pty > 2) { (void) close(pty); pty = -1; } #endif } #if !defined(CRAY) || !defined(NEWINIT) #ifndef O_NOCTTY #define O_NOCTTY 0 #endif /* * Open the specified slave side of the pty, * making sure that we have a clean tty. */ int cleanopen(line) char *line; { register int t; #ifdef UNICOS7x struct secstat secbuf; #endif /* UNICOS7x */ #ifndef STREAMSPTY /* * Make sure that other people can't open the * slave side of the connection. */ (void) chown(line, 0, 0); (void) chmod(line, 0600); #endif # if !defined(CRAY) && (BSD > 43) (void) revoke(line); # endif #ifdef UNICOS7x if (secflag) { if (secstat(line, &secbuf) < 0) return(-1); if (setulvl(secbuf.st_slevel) < 0) return(-1); if (setucmp(secbuf.st_compart) < 0) return(-1); } #endif /* UNICOS7x */ t = open(line, O_RDWR|O_NOCTTY); #ifdef UNICOS7x if (secflag) { if (setulvl(sysv.sy_minlvl) < 0) return(-1); if (setucmp(0) < 0) return(-1); } #endif /* UNICOS7x */ if (t < 0) return(-1); /* * Hangup anybody else using this ttyp, then reopen it for * ourselves. */ # if !(defined(CRAY) || defined(__hpux)) && (BSD <= 43) && !defined(STREAMSPTY) (void) signal(SIGHUP, SIG_IGN); vhangup(); (void) signal(SIGHUP, SIG_DFL); t = open(line, O_RDWR|O_NOCTTY); if (t < 0) return(-1); # endif # if defined(CRAY) && defined(TCVHUP) { register int i; (void) signal(SIGHUP, SIG_IGN); (void) ioctl(t, TCVHUP, (char *)0); (void) signal(SIGHUP, SIG_DFL); #ifdef UNICOS7x if (secflag) { if (secstat(line, &secbuf) < 0) return(-1); if (setulvl(secbuf.st_slevel) < 0) return(-1); if (setucmp(secbuf.st_compart) < 0) return(-1); } #endif /* UNICOS7x */ i = open(line, O_RDWR); #ifdef UNICOS7x if (secflag) { if (setulvl(sysv.sy_minlvl) < 0) return(-1); if (setucmp(0) < 0) return(-1); } #endif /* UNICOS7x */ if (i < 0) return(-1); (void) close(t); t = i; } # endif /* defined(CRAY) && defined(TCVHUP) */ return(t); } #endif /* !defined(CRAY) || !defined(NEWINIT) */ #if BSD <= 43 int login_tty(t) int t; { if (setsid() < 0) { #ifdef ultrix /* * The setsid() may have failed because we * already have a pgrp == pid. Zero out * our pgrp and try again... */ if ((setpgrp(0, 0) < 0) || (setsid() < 0)) #endif fatalperror(net, "setsid()"); } # ifdef TIOCSCTTY if (ioctl(t, TIOCSCTTY, (char *)0) < 0) fatalperror(net, "ioctl(sctty)"); # if defined(CRAY) /* * Close the hard fd to /dev/ttypXXX, and re-open through * the indirect /dev/tty interface. */ close(t); if ((t = open("/dev/tty", O_RDWR)) < 0) fatalperror(net, "open(/dev/tty)"); # endif # else /* * We get our controlling tty assigned as a side-effect * of opening up a tty device. But on BSD based systems, * this only happens if our process group is zero. The * setsid() call above may have set our pgrp, so clear * it out before opening the tty... */ # ifndef SOLARIS (void) setpgrp(0, 0); # else (void) setpgrp(); # endif close(open(line, O_RDWR)); # endif if (t != 0) (void) dup2(t, 0); if (t != 1) (void) dup2(t, 1); if (t != 2) (void) dup2(t, 2); if (t > 2) close(t); return(0); } #endif /* BSD <= 43 */ #ifdef NEWINIT char *gen_id = "fe"; #endif /* * startslave(host) * * Given a hostname, do whatever * is necessary to startup the login process on the slave side of the pty. */ /* ARGSUSED */ void startslave(host, autologin, autoname) char *host; int autologin; char *autoname; { register int i; #ifdef NEWINIT extern char *ptyip; struct init_request request; void nologinproc(); register int n; #endif /* NEWINIT */ #if defined(AUTHENTICATION) if (!autoname || !autoname[0]) autologin = 0; if (autologin < auth_level) { fatal(net, "Authorization failed"); exit(1); } #endif #ifndef NEWINIT # ifdef PARENT_DOES_UTMP utmp_sig_init(); # endif /* PARENT_DOES_UTMP */ if ((i = fork()) < 0) fatalperror(net, "fork"); if (i) { # ifdef PARENT_DOES_UTMP /* * Cray parent will create utmp entry for child and send * signal to child to tell when done. Child waits for signal * before doing anything important. */ register int pid = i; void sigjob P((int)); setpgrp(); utmp_sig_reset(); /* reset handler to default */ /* * Create utmp entry for child */ (void) time(&wtmp.ut_time); wtmp.ut_type = LOGIN_PROCESS; wtmp.ut_pid = pid; SCPYN(wtmp.ut_user, "LOGIN"); SCPYN(wtmp.ut_host, host); SCPYN(wtmp.ut_line, line + sizeof("/dev/") - 1); #ifndef __hpux SCPYN(wtmp.ut_id, wtmp.ut_line+3); #else SCPYN(wtmp.ut_id, wtmp.ut_line+7); #endif pututline(&wtmp); endutent(); if ((i = open(wtmpf, O_WRONLY|O_APPEND)) >= 0) { (void) write(i, (char *)&wtmp, sizeof(struct utmp)); (void) close(i); } #ifdef CRAY (void) signal(WJSIGNAL, sigjob); #endif utmp_sig_notify(pid); # endif /* PARENT_DOES_UTMP */ } else { getptyslave(autologin); start_login(host, autologin, autoname); /*NOTREACHED*/ } #else /* NEWINIT */ /* * Init will start up login process if we ask nicely. We only wait * for it to start up and begin normal telnet operation. */ if ((i = open(INIT_FIFO, O_WRONLY)) < 0) { char tbuf[128]; (void) snprintf(tbuf, sizeof tbuf, "Can't open %s\n", INIT_FIFO); fatalperror(net, tbuf); } memset((void *)&request, 0, sizeof(request)); request.magic = INIT_MAGIC; SCPYN(request.gen_id, gen_id); SCPYN(request.tty_id, &line[8]); SCPYN(request.host, host); SCPYN(request.term_type, terminaltype ? terminaltype : "network"); #if !defined(UNICOS5) request.signal = SIGCLD; request.pid = getpid(); #endif #ifdef BFTPDAEMON /* * Are we working as the bftp daemon? */ if (bftpd) { SCPYN(request.exec_name, BFTPPATH); } #endif /* BFTPDAEMON */ if (write(i, (char *)&request, sizeof(request)) < 0) { char tbuf[128]; (void) snprintf(tbuf, sizeof tbuf, "Can't write to %s\n", INIT_FIFO); fatalperror(net, tbuf); } (void) close(i); (void) signal(SIGALRM, nologinproc); for (i = 0; ; i++) { char tbuf[128]; alarm(15); n = read(pty, ptyip, BUFSIZ); if (i == 3 || n >= 0 || !gotalarm) break; gotalarm = 0; snprintf(tbuf, sizeof tbuf, "telnetd: waiting for /etc/init to start login process on %s\r\n", line); (void) write(net, tbuf, strlen(tbuf)); } if (n < 0 && gotalarm) fatal(net, "/etc/init didn't start login process"); pcc += n; alarm(0); (void) signal(SIGALRM, SIG_DFL); return; #endif /* NEWINIT */ } char *envinit[3]; extern char **environ; void init_env() { extern char *getenv(); char **envp; envp = envinit; if ((*envp = getenv("TZ"))) *envp++ -= 3; #if defined(CRAY) || defined(__hpux) else *envp++ = "TZ=GMT0"; #endif *envp = 0; environ = envinit; } #ifndef NEWINIT /* * start_login(host) * * Assuming that we are now running as a child processes, this * function will turn us into the login process. */ void start_login(host, autologin, name) char *host; int autologin; char *name; { register char **argv; char **addarg(); extern char *getenv(); extern char *getstr(); extern char *gettyname; #define TABBUFSIZ 512 char defent[TABBUFSIZ]; char defstrs[TABBUFSIZ]; #undef TABBUFSIZ char *loginprog = NULL; #ifdef UTMPX register int pid = getpid(); struct utmpx utmpx; #endif #ifdef SOLARIS char *term; char termbuf[64]; #endif #ifdef UTMPX /* * Create utmp entry for child */ memset((void *)&utmpx, 0, sizeof(utmpx)); SCPYN(utmpx.ut_user, ".telnet"); SCPYN(utmpx.ut_line, line + sizeof("/dev/") - 1); utmpx.ut_pid = pid; utmpx.ut_id[0] = 't'; utmpx.ut_id[1] = 'n'; utmpx.ut_id[2] = SC_WILDC; utmpx.ut_id[3] = SC_WILDC; utmpx.ut_type = LOGIN_PROCESS; (void) time(&utmpx.ut_tv.tv_sec); if (makeutx(&utmpx) == NULL) fatal(net, "makeutx failed"); #endif scrub_env(); /* * -h : pass on name of host. * WARNING: -h is accepted by login if and only if * getuid() == 0. * -p : don't clobber the environment (so terminal type stays set). * * -f : force this login, he has already been authenticated */ argv = addarg(0, "login"); #if !defined(NO_LOGIN_H) # if defined (AUTHENTICATION) && defined(NO_LOGIN_F) && defined(LOGIN_R) /* * Don't add the "-h host" option if we are going * to be adding the "-r host" option down below... */ if ((auth_level < 0) || (autologin != AUTH_VALID)) # endif { argv = addarg(argv, "-h"); argv = addarg(argv, host); #ifdef SOLARIS /* * SVR4 version of -h takes TERM= as second arg, or - */ term = getenv("TERM"); if (term == NULL || term[0] == 0) { term = "-"; } else { strcpy(termbuf, "TERM="); strncat(termbuf, term, sizeof(termbuf) - 6); term = termbuf; } argv = addarg(argv, term); #endif } #endif #if !defined(NO_LOGIN_P) argv = addarg(argv, "-p"); #endif #ifdef LINEMODE /* * Set the environment variable "LINEMODE" to either * "real" or "kludge" if we are operating in either * real or kludge linemode. */ if (lmodetype == REAL_LINEMODE) setenv("LINEMODE", "real", 1); # ifdef KLUDGELINEMODE else if (lmodetype == KLUDGE_LINEMODE || lmodetype == KLUDGE_OK) setenv("LINEMODE", "kludge", 1); # endif #endif #ifdef BFTPDAEMON /* * Are we working as the bftp daemon? If so, then ask login * to start bftp instead of shell. */ if (bftpd) { argv = addarg(argv, "-e"); argv = addarg(argv, BFTPPATH); } else #endif #if defined (SecurID) /* * don't worry about the -f that might get sent. * A -s is supposed to override it anyhow. */ if (require_SecurID) argv = addarg(argv, "-s"); #endif #if defined (AUTHENTICATION) if (auth_level >= 0 && autologin == AUTH_VALID) { # if !defined(NO_LOGIN_F) argv = addarg(argv, "-f"); argv = addarg(argv, "--"); argv = addarg(argv, name); # else # if defined(LOGIN_R) /* * We don't have support for "login -f", but we * can fool /bin/login into thinking that we are * rlogind, and allow us to log in without a * password. The rlogin protocol expects * local-user\0remote-user\0term/speed\0 */ if (pty > 2) { register char *cp; char speed[128]; int isecho, israw, xpty, len; extern int def_rspeed; # ifndef LOGIN_HOST /* * Tell login that we are coming from "localhost". * If we passed in the real host name, then the * user would have to allow .rhost access from * every machine that they want authenticated * access to work from, which sort of defeats * the purpose of an authenticated login... * So, we tell login that the session is coming * from "localhost", and the user will only have * to have "localhost" in their .rhost file. */ # define LOGIN_HOST "localhost" # endif argv = addarg(argv, "-r"); argv = addarg(argv, LOGIN_HOST); xpty = pty; # ifndef STREAMSPTY pty = 0; # else ttyfd = 0; # endif init_termbuf(); isecho = tty_isecho(); israw = tty_israw(); if (isecho || !israw) { tty_setecho(0); /* Turn off echo */ tty_setraw(1); /* Turn on raw */ set_termbuf(); } len = strlen(name)+1; write(xpty, name, len); write(xpty, name, len); snprintf(speed, sizeof speed, "%s/%d", (cp = getenv("TERM")) ? cp : "", (def_rspeed > 0) ? def_rspeed : 9600); len = strlen(speed)+1; write(xpty, speed, len); if (isecho || !israw) { init_termbuf(); tty_setecho(isecho); tty_setraw(israw); set_termbuf(); if (!israw) { /* * Write a newline to ensure * that login will be able to * read the line... */ write(xpty, "\n", 1); } } pty = xpty; } # else argv = addarg(argv, "--"); argv = addarg(argv, name); # endif # endif } else #endif if (getenv("USER")) { argv = addarg(argv, "--"); argv = addarg(argv, getenv("USER")); #if defined(LOGIN_ARGS) && defined(NO_LOGIN_P) { register char **cpp; for (cpp = environ; *cpp; cpp++) argv = addarg(argv, *cpp); } #endif /* * Assume that login will set the USER variable * correctly. For SysV systems, this means that * USER will no longer be set, just LOGNAME by * login. (The problem is that if the auto-login * fails, and the user then specifies a different * account name, he can get logged in with both * LOGNAME and USER in his environment, but the * USER value will be wrong. */ unsetenv("USER"); } #ifdef SOLARIS else { char **p; argv = addarg(argv, ""); /* no login name */ for (p = environ; *p; p++) { argv = addarg(argv, *p); } } #endif /* SOLARIS */ #if defined(AUTHENTICATION) && defined(NO_LOGIN_F) && defined(LOGIN_R) if (pty > 2) close(pty); #endif if (getent(defent, gettyname) == 1) { char *cp = defstrs; loginprog = getstr("lo", &cp); } if (loginprog == NULL) loginprog = _PATH_LOGIN; closelog(); /* * This sleep(1) is in here so that telnetd can * finish up with the tty. There's a race condition * the login banner message gets lost... */ sleep(1); execv(loginprog, argv); syslog(LOG_ERR, "%s: %m", loginprog); fatalperror(net, loginprog); /*NOTREACHED*/ } char ** addarg(argv, val) register char **argv; register char *val; { register char **cpp; if (argv == NULL) { /* * 10 entries, a leading length, and a null */ argv = (char **)malloc(sizeof(*argv) * 12); if (argv == NULL) return(NULL); *argv++ = (char *)10; *argv = (char *)0; } for (cpp = argv; *cpp; cpp++) ; if (cpp == &argv[(long)argv[-1]]) { --argv; *argv = (char *)((long)(*argv) + 10); argv = (char **)realloc(argv, sizeof(*argv)*((long)(*argv) + 2)); if (argv == NULL) return(NULL); argv++; cpp = &argv[(long)argv[-1] - 10]; } *cpp++ = val; *cpp = 0; return(argv); } #endif /* NEWINIT */ /* * scrub_env() * * Remove a few things from the environment that * don't need to be there. */ void scrub_env() { register char **cpp, **cpp2; for (cpp2 = cpp = environ; *cpp; cpp++) { if (strncmp(*cpp, "LD_", 3) && strncmp(*cpp, "_RLD_", 5) && strncmp(*cpp, "LIBPATH=", 8) && strncmp(*cpp, "ENV=", 4) && strncmp(*cpp, "IFS=", 4)) *cpp2++ = *cpp; } *cpp2 = 0; } /* * cleanup() * * This is the routine to call when we are all through, to * clean up anything that needs to be cleaned up. */ /* ARGSUSED */ void cleanup(sig) int sig; { #ifndef PARENT_DOES_UTMP # if (BSD > 43) || defined(convex) char *p; p = line + sizeof("/dev/") - 1; if (logout(p)) logwtmp(p, "", ""); (void)chmod(line, 0666); (void)chown(line, 0, 0); *p = 'p'; (void)chmod(line, 0666); (void)chown(line, 0, 0); (void) shutdown(net, 2); exit(1); # else void rmut(); rmut(); vhangup(); /* XXX */ (void) shutdown(net, 2); exit(1); # endif #else /* PARENT_DOES_UTMP */ # ifdef NEWINIT (void) shutdown(net, 2); exit(1); # else /* NEWINIT */ # ifdef CRAY static int incleanup = 0; register int t; int child_status; /* status of child process as returned by waitpid */ int flags = WNOHANG|WUNTRACED; /* * 1: Pick up the zombie, if we are being called * as the signal handler. * 2: If we are a nested cleanup(), return. * 3: Try to clean up TMPDIR. * 4: Fill in utmp with shutdown of process. * 5: Close down the network and pty connections. * 6: Finish up the TMPDIR cleanup, if needed. */ if (sig == SIGCHLD) { while (waitpid(-1, &child_status, flags) > 0) ; /* VOID */ /* Check if the child process was stopped * rather than exited. We want cleanup only if * the child has died. */ if (WIFSTOPPED(child_status)) { return; } } t = sigblock(sigmask(SIGCHLD)); if (incleanup) { sigsetmask(t); return; } incleanup = 1; sigsetmask(t); #ifdef UNICOS7x if (secflag) { /* * We need to set ourselves back to a null * label to clean up. */ setulvl(sysv.sy_minlvl); setucmp((long)0); } #endif /* UNICOS7x */ t = cleantmp(&wtmp); setutent(); /* just to make sure */ # endif /* CRAY */ rmut(line); close(pty); (void) shutdown(net, 2); # ifdef CRAY if (t == 0) cleantmp(&wtmp); # endif /* CRAY */ exit(1); # endif /* NEWINT */ #endif /* PARENT_DOES_UTMP */ } #if defined(PARENT_DOES_UTMP) && !defined(NEWINIT) /* * _utmp_sig_rcv * utmp_sig_init * utmp_sig_wait * These three functions are used to coordinate the handling of * the utmp file between the server and the soon-to-be-login shell. * The server actually creates the utmp structure, the child calls * utmp_sig_wait(), until the server calls utmp_sig_notify() and * signals the future-login shell to proceed. */ static int caught=0; /* NZ when signal intercepted */ static void (*func)(); /* address of previous handler */ void _utmp_sig_rcv(sig) int sig; { caught = 1; (void) signal(SIGUSR1, func); } void utmp_sig_init() { /* * register signal handler for UTMP creation */ if ((int)(func = signal(SIGUSR1, _utmp_sig_rcv)) == -1) fatalperror(net, "telnetd/signal"); } void utmp_sig_reset() { (void) signal(SIGUSR1, func); /* reset handler to default */ } # ifdef __hpux # define sigoff() /* do nothing */ # define sigon() /* do nothing */ # endif void utmp_sig_wait() { /* * Wait for parent to write our utmp entry. */ sigoff(); while (caught == 0) { pause(); /* wait until we get a signal (sigon) */ sigoff(); /* turn off signals while we check caught */ } sigon(); /* turn on signals again */ } void utmp_sig_notify(pid) { kill(pid, SIGUSR1); } # ifdef CRAY static int gotsigjob = 0; /*ARGSUSED*/ void sigjob(sig) int sig; { register int jid; register struct jobtemp *jp; while ((jid = waitjob(NULL)) != -1) { if (jid == 0) { return; } gotsigjob++; jobend(jid, NULL, NULL); } } /* * jid_getutid: * called by jobend() before calling cleantmp() * to find the correct $TMPDIR to cleanup. */ struct utmp * jid_getutid(jid) int jid; { struct utmp *cur = NULL; setutent(); /* just to make sure */ while (cur = getutent()) { if ( (cur->ut_type != NULL) && (jid == cur->ut_jid) ) { return(cur); } } return(0); } /* * Clean up the TMPDIR that login created. * The first time this is called we pick up the info * from the utmp. If the job has already gone away, * then we'll clean up and be done. If not, then * when this is called the second time it will wait * for the signal that the job is done. */ int cleantmp(wtp) register struct utmp *wtp; { struct utmp *utp; static int first = 1; register int mask, omask, ret; extern struct utmp *getutid P((const struct utmp *_Id)); mask = sigmask(WJSIGNAL); if (first == 0) { omask = sigblock(mask); while (gotsigjob == 0) sigpause(omask); return(1); } first = 0; setutent(); /* just to make sure */ utp = getutid(wtp); if (utp == 0) { syslog(LOG_ERR, "Can't get /etc/utmp entry to clean TMPDIR"); return(-1); } /* * Nothing to clean up if the user shell was never started. */ if (utp->ut_type != USER_PROCESS || utp->ut_jid == 0) return(1); /* * Block the WJSIGNAL while we are in jobend(). */ omask = sigblock(mask); ret = jobend(utp->ut_jid, utp->ut_tpath, utp->ut_user); sigsetmask(omask); return(ret); } int jobend(jid, path, user) register int jid; register char *path; register char *user; { static int saved_jid = 0; static int pty_saved_jid = 0; static char saved_path[sizeof(wtmp.ut_tpath)+1]; static char saved_user[sizeof(wtmp.ut_user)+1]; /* * this little piece of code comes into play * only when ptyreconnect is used to reconnect * to an previous session. * * this is the only time when the * "saved_jid != jid" code is executed. */ if ( saved_jid && saved_jid != jid ) { if (!path) { /* called from signal handler */ pty_saved_jid = jid; } else { pty_saved_jid = saved_jid; } } if (path) { strncpy(saved_path, path, sizeof(wtmp.ut_tpath)); strncpy(saved_user, user, sizeof(wtmp.ut_user)); saved_path[sizeof(saved_path)] = '\0'; saved_user[sizeof(saved_user)] = '\0'; } if (saved_jid == 0) { saved_jid = jid; return(0); } /* if the jid has changed, get the correct entry from the utmp file */ if ( saved_jid != jid ) { struct utmp *utp = NULL; struct utmp *jid_getutid(); utp = jid_getutid(pty_saved_jid); if (utp == 0) { syslog(LOG_ERR, "Can't get /etc/utmp entry to clean TMPDIR"); return(-1); } cleantmpdir(jid, utp->ut_tpath, utp->ut_user); return(1); } cleantmpdir(jid, saved_path, saved_user); return(1); } /* * Fork a child process to clean up the TMPDIR */ cleantmpdir(jid, tpath, user) register int jid; register char *tpath; register char *user; { switch(fork()) { case -1: syslog(LOG_ERR, "TMPDIR cleanup(%s): fork() failed: %m", tpath); break; case 0: execl(CLEANTMPCMD, CLEANTMPCMD, user, tpath, 0); syslog(LOG_ERR, "TMPDIR cleanup(%s): execl(%s) failed: %m", tpath, CLEANTMPCMD); exit(1); default: /* * Forget about child. We will exit, and * /etc/init will pick it up. */ break; } } # endif /* CRAY */ #endif /* defined(PARENT_DOES_UTMP) && !defined(NEWINIT) */ /* * rmut() * * This is the function called by cleanup() to * remove the utmp entry for this person. */ #ifdef UTMPX void rmut() { register f; int found = 0; struct utmp *u, *utmp; int nutmp; struct stat statbf; struct utmpx *utxp, utmpx; /* * This updates the utmpx and utmp entries and make a wtmp/x entry */ SCPYN(utmpx.ut_line, line + sizeof("/dev/") - 1); utxp = getutxline(&utmpx); if (utxp) { utxp->ut_type = DEAD_PROCESS; utxp->ut_exit.e_termination = 0; utxp->ut_exit.e_exit = 0; (void) time(&utmpx.ut_tv.tv_sec); utmpx.ut_tv.tv_usec = 0; modutx(utxp); } endutxent(); } /* end of rmut */ #endif #if !defined(UTMPX) && !(defined(CRAY) || defined(__hpux)) && BSD <= 43 void rmut() { register f; int found = 0; struct utmp *u, *utmp; int nutmp; struct stat statbf; f = open(utmpf, O_RDWR); if (f >= 0) { (void) fstat(f, &statbf); utmp = (struct utmp *)malloc((unsigned)statbf.st_size); if (!utmp) syslog(LOG_ERR, "utmp malloc failed"); if (statbf.st_size && utmp) { nutmp = read(f, (char *)utmp, (int)statbf.st_size); nutmp /= sizeof(struct utmp); for (u = utmp ; u < &utmp[nutmp] ; u++) { if (SCMPN(u->ut_line, line+5) || u->ut_name[0]==0) continue; (void) lseek(f, ((off_t)u)-((off_t)utmp), L_SET); SCPYN(u->ut_name, ""); SCPYN(u->ut_host, ""); (void) time(&u->ut_time); (void) write(f, (char *)u, sizeof(wtmp)); found++; } } (void) close(f); } if (found) { f = open(wtmpf, O_WRONLY|O_APPEND); if (f >= 0) { SCPYN(wtmp.ut_line, line+5); SCPYN(wtmp.ut_name, ""); SCPYN(wtmp.ut_host, ""); (void) time(&wtmp.ut_time); (void) write(f, (char *)&wtmp, sizeof(wtmp)); (void) close(f); } } (void) chmod(line, 0666); (void) chown(line, 0, 0); line[strlen("/dev/")] = 'p'; (void) chmod(line, 0666); (void) chown(line, 0, 0); } /* end of rmut */ #endif /* CRAY */ #ifdef __hpux rmut (line) char *line; { struct utmp utmp; struct utmp *utptr; int fd; /* for /etc/wtmp */ utmp.ut_type = USER_PROCESS; (void) strncpy(utmp.ut_id, line+12, sizeof(utmp.ut_id)); (void) setutent(); utptr = getutid(&utmp); /* write it out only if it exists */ if (utptr) { utptr->ut_type = DEAD_PROCESS; utptr->ut_time = time((time_t *) 0); (void) pututline(utptr); /* set wtmp entry if wtmp file exists */ if ((fd = open(wtmpf, O_WRONLY | O_APPEND)) >= 0) { (void) write(fd, utptr, sizeof(utmp)); (void) close(fd); } } (void) endutent(); (void) chmod(line, 0666); (void) chown(line, 0, 0); line[14] = line[13]; line[13] = line[12]; line[8] = 'm'; line[9] = '/'; line[10] = 'p'; line[11] = 't'; line[12] = 'y'; (void) chmod(line, 0666); (void) chown(line, 0, 0); } #endif