.\"	$OpenBSD: fdisk.8,v 1.109 2022/02/03 13:24:04 visa Exp $
.\"
.\"
.\" Copyright (c) 1997 Tobias Weingartner
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd $Mdocdate: February 3 2022 $
.Dt FDISK 8
.Os
.Sh NAME
.Nm fdisk
.Nd partition table maintenance program
.Sh SYNOPSIS
.Nm fdisk
.Op Fl evy
.Op Fl A  | g | i | u
.Op Fl b Ar blocks Ns Op @ Ns Ar offset Ns Op : Ns Ar type
.Op Fl l Ar blocks | Fl c Ar cylinders Fl h Ar heads Fl s Ar sectors
.Op Fl f Ar mbrfile
.Ar disk
.Sh DESCRIPTION
.Nm fdisk
makes changes to the MBR and GPT tables found on some disks.
On such disks sector 0 contains a 4-entry MBR partition table
that divides the space.
The GPT partition table, when present, starts at sector 1.
.Pp
Each entry has a type.
A type of
.Ar 0xA6
indicates an
.Ox
MBR partition, which starts with its own
16-entry partition table known as a
.Xr disklabel 5 .
This can be edited using
.Xr disklabel 8 .
.Pp
Caution is advised when editing these tables, since some platforms
use tricks to boot and may rely on specific configurations created
at install time.
.Pp
The options are as follows:
.Bl -tag -width Ds
.It Fl A
Modifies existing GPT partitions to allocate all possible space to an
.Ox
partition
and the optional
.Fl b
partition.
The free space is maximized by deleting
all existing partitions except the boot partitions
.Sq APFS ISC ,
.Sq APFS ,
.Sq APFS Recovry ,
.Sq BIOS Boot ,
.Sq HiFive FSBL
and
.Sq HiFive BBL .
.It Fl b Ar blocks Ns Op @ Ns Ar offset Ns Op : Ns Ar type
Configures a special boot partition of the specified number of blocks, offset
and type.
.Ar offset
defaults to the first available block, and
.Ar type
defaults to
.Sq EF .
.Pp
The
.Ox
partition will follow the boot partition and use the remaining
available space.
.Pp
Can only be used when initializing
.Ar disk
with
.Fl A ,
.Fl g ,
or
.Fl i .
If
.Fl A
or
.Fl g
is specified, only the
.Ar blocks
value is used.
.It Xo
.Fl c Ar cylinders
.Fl h Ar heads
.Fl s Ar sectors
.Xc
Specifies an alternate BIOS geometry for
.Nm
to use.
By default, an automatic calculation of disk size will be built
using heuristics.
These figures are taken from the in-core disklabel
(see
.Xr disklabel 8 ) ,
or values that
.Em /boot
has passed to the kernel.
.It Fl e
Use the
.Nm
interactive editor to modify the partition table.
See
.Sx COMMAND MODE ,
below, for more information.
.It Fl f Ar mbrfile
Specifies an alternate MBR template file.
The default file is
.Pa /usr/mdec/mbr .
.It Fl g
A default GPT, including a protective MBR, will be written to
.Ar disk .
The default GPT has a single
.Ox
partition containing all available space not allocated by
.Fl b .
.It Fl i
A default MBR will be written to
.Ar disk .
The default MBR will be read from
the file specified by
.Fl f ,
the default file
.Pa /usr/mdec/mbr
or the built-in default.
Normally the default MBR has a single
.Ox
partition containing all available space not allocated by
.Fl b .
.It Fl l Ar blocks
Treat
.Ar disk
as if it has the specified number of blocks.
.It Fl u
Update MBR bootcode, preserving existing MBR partition table.
The MBR bootcode extends from offset 0x000 to the start of the MBR partition
table at offset 0x1BE.
This is useful for writing new MBR bootcode onto an existing drive, and is
equivalent to the DOS command
.Dq FDISK /MBR .
Note that this option will overwrite the NT disk signature, if present.
.It Fl v
Print the contents of the MBR, the Primary GPT and the Secondary GPT.
Also print more detailed GPT header and partition entry information.
.It Fl y
Avoid asking yes/no questions when not desirable.
.It Ar disk
Specify the
.Ar disk
to operate on.
It can be specified either by its full pathname or an abbreviated disk form.
In its abbreviated form, the path to the device and the
.Sq r
denoting
.Qq raw device
are omitted and the partition letter is optional.
For example, the first IDE disk can be specified as either
.Pa /dev/rwd0c ,
.Pa wd0c ,
or
.Pa wd0 .
.El
.Sh TYPICAL LAYOUT
When called with no special flags,
.Nm
prints the partition table of the
.Ar disk .
.Pp
If
.Ar disk
does not contain a valid GPT the contents of the MBR are displayed.
For example:
.Bd -literal -offset 1n
# fdisk sd0
Disk: sd0      geometry: 121601/255/63 [1953525168 Sectors]
Offset: 0      Signature: 0xAA55
           Starting       Ending      LBA Info:
 #: id     C  H  S -      C   H  S [     start:       size ]
------------------------------------------------------------------------
 0: 0B     0  1  1 -  26108   0 63 [        63:  419425020 ] FAT32
 1: 00     0  0  0 -      0   0  0 [         0:          0 ] unused
 2: 00     0  0  0 -      0   0  0 [         0:          0 ] unused
*3: A6 26108  1  1 - 121600 254 63 [ 419425083: 1534094982 ] OpenBSD
.Ed
.Pp
This 1953525168 sector (931GB) disk drive is divided into two MBR
partitions that span the whole disk.
The first MBR partition is a 200GB FAT32 partition;
the second is a 731GB
.Ox
MBR partition using the remainder of the disk.
The fields of the output are:
.Bl -tag -width "start/size"
.It Em "#"
Number identifying each MBR partition table entry.
There are a total of four slots.
.Sq *
denotes the MBR partition which is declared bootable.
.It Em "id"
MBR partition type identifier.
.Ox
reserves the
magic number hexadecimal A6 (166 decimal).
.It Em "C/H/S"
These fields provide the starting and ending address of the MBR partition
in BIOS geometry.
.It Em "start/size"
These fields provide the starting sector and size in sectors of the
MBR partition in linear block addresses.
.El
.Pp
.Em NOTE :
The BIOS geometry sectors field (C/H/S) is
.Dq 1 based ,
but the LBA "start" field is
.Dq 0 based .
.Pp
The CHS values will need to be in the BIOS's geometry
for the system to be able to boot and use the drive correctly.
These values must be kept correctly synchronized or a variety of
problems develop which are very difficult to diagnose.
.Pp
If
.Ar disk
contains a protective MBR and a valid GPT, the contents of the GPT
are displayed.
For example:
.Bd -literal -offset 1n
Disk: sd2       Usable LBA: 64 to 7765952 [7766016 Sectors]
   #: type                                 [       start:         size ]
------------------------------------------------------------------------
   1: EFI Sys                              [          64:          960 ]
   3: OpenBSD                              [        1024:      7764929 ]
.Ed
.Pp
This 7766016 sector disk drive is divided into two
partitions that span the whole disk.
The first partition is a 960 sector EFI Sys partition;
the second is a 7764929 sector
.Ox
partition using the remaining space.
The fields of the output are:
.Bl -tag -width "type"
.It Em "#"
Number identifying each partition table entry.
.It Em "type"
The partition type identifier.
If the type is recognized the name of the type is displayed.
Otherwise the type GUID is displayed.
.It Em "start"
The sector the partition starts on.
.It Em "size"
The number of sectors in the partition.
.El
.Pp
If the
.Fl v
option is specified, the disk GUID and each partition's GUID and name are
also displayed.
.Pp
In either the MBR or GPT case the
.Ox
partition shown above is subdivided further using the
functionality provided by
.Xr disklabel 8 ,
which provides
.Ox
partitions.
.Bd -literal -offset 1n
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: WDC WD10EADS-65L
duid: 085ef8d68623f5b3
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 121601
total sectors: 1953525168
boundstart: 419425083
boundend: 1953520065
drivedata: 0

16 partitions:
#                size           offset  fstype [fsize bsize  cpg]
  a:          2097125        419425083  4.2BSD   2048 16384    1
  b:          4715520        421522208    swap
  c:       1953525168                0  unused
  d:          8388608        426237728  4.2BSD   2048 16384    1
  e:         16771072        434626336  4.2BSD   2048 16384    1
  f:          4194304        451397408  4.2BSD   2048 16384    1
  g:          2097152        455591712  4.2BSD   2048 16384    1
  h:         20971520        457688864  4.2BSD   2048 16384    1
  i:        419425020               63   MSDOS
  j:          4194304        478660384  4.2BSD   2048 16384    1
  k:          4194304        482854688  4.2BSD   2048 16384    1
  l:        629145536        487049024  4.2BSD   4096 32768    1
.Ed
.Pp
These
.Ox
partitions are then mounted as follows using
.Pa /etc/fstab :
.Bd -literal -offset indent
/dev/sd0a / ffs rw,softdep 1 1
/dev/sd0d /tmp ffs rw,softdep,nodev,nosuid 1 2
/dev/sd0e /var ffs rw,softdep,nodev,nosuid 1 2
/dev/sd0f /usr ffs rw,softdep,nodev 1 2
/dev/sd0g /usr/X11R6 ffs rw,softdep,nodev 1 2
/dev/sd0h /usr/local ffs rw,softdep,nodev 1 2
/dev/sd0i /mnt/example msdos rw,nodev,nosuid 1 2
/dev/sd0j /usr/src ffs rw,softdep,nodev,nosuid 1 2
/dev/sd0k /usr/obj ffs rw,softdep,nodev,nosuid 1 2
/dev/sd0l /home ffs rw,softdep,nodev,nosuid 1 2
.Ed
.Sh COMMAND MODE
The
.Fl e
flag causes
.Nm
to enter an interactive command mode.
The prompt contains information about the state of the edit
process.
.Pp
.Dl Ar disk Ns *:1>
.Pp
Where
.Ar disk
is the name of the disk being edited,
.Sq *
means that the in-memory copy of the partition table has been modified, but
not yet written to disk and
1 is the number of the boot block being edited.
This number will be 2 when editing an extended MBR partition,
3 when editing an extended MBR partition within an extended MBR partition,
and so on.
.Pp
The list of commands and their explanations are given below.
Commands may be abbreviated provided enough characters are given to ensure
unambiguity.
.Bl -tag -width Ds
.It Cm ?\&
A synonym for
.Cm help .
.It Cm help
Display a list of commands that
.Nm
understands in the interactive edit mode.
.It Cm manual
Display this manual page.
.It Cm reinit Op Cm gpt | Cm mbr
Initialize the currently selected, in-memory copy of the
boot block.
.Pp
By default an MBR is initialized.
If
.Cm gpt
is specified a protective MBR and a GPT are initialized.
.It Cm edit Ar #
Edit a given table entry in the memory copy of
the current boot block.
Sizes may be adjusted in BIOS geometry mode (MBR only) or using
sector offsets and sizes.
A unit
.Sq b ,
.Sq k ,
.Sq m ,
.Sq g ,
or
.Sq t
may be appended to indicate bytes, kilobytes, megabytes, gigabytes,
or terabytes.
The special size value
.Sq *
will cause the partition to be sized to use the remainder of the disk.
.It Cm flag Ar # Op Ar value
Make the given MBR partition table entry bootable
and mark all others as not bootable
(only one entry can be marked bootable).
The bootable partition is denoted with
.Sq * .
.\" If you wish to boot from an extended
.\" MBR partition, you will need to mark the MBR partition table entry for the
.\" extended MBR partition as bootable.
If a
.Ar value
of 0 is given,
the MBR partition is marked as not bootable,
but no other MBR partitions are touched.
.It Cm update
Update the machine MBR bootcode and 0xAA55 signature in the memory copy
of the currently selected MBR.
Note that this option will overwrite an NT disk
signature, if present.
Not available when editing a GPT.
.It Cm select Ar #
Select and load into memory the MBR pointed
to by the extended MBR partition table entry in the current boot block.
Not available when editing a GPT.
.It Cm setpid Ar #
Change the partition
identifier of the given partition table entry.
This command is particularly useful for reassigning
an existing partition to
.Ox .
.It Cm swap Ar # Ar #
Swap two partition entries.
.It Cm print Op Ar unit
Print the currently selected in-memory copy of the
partition table to the terminal.
A
.Ar unit
.Sq b ,
.Sq k ,
.Sq m ,
.Sq g ,
or
.Sq t
may be appended to indicate bytes, kilobytes, megabytes, gigabytes,
or terabytes.
Otherwise the number of sectors is printed.
.It Cm write
Write the in-memory copy of the partition table to disk.
.It Cm exit
Exit the current level of
.Nm fdisk ,
either returning to the
previously selected in-memory copy of a MBR, or exiting the
program if there is none.
.It Cm quit
Exit the current level of
.Nm fdisk ,
either returning to the
previously selected in-memory copy of a MBR, or exiting the
program if there is none.
Unlike
.Em exit
it does write the modified block out.
.It Cm abort
Quit program without saving current changes.
.El
.Sh FILES
.Bl -tag -width /usr/mdec/mbr -compact
.It Pa /usr/mdec/mbr
default MBR template
.El
.Sh SEE ALSO
.Xr fstab 5 ,
.Xr boot_amd64 8 ,
.Xr boot_i386 8 ,
.Xr boot_macppc 8 ,
.Xr disklabel 8
.Sh CAVEATS
Hand crafted disk layouts are highly error prone.
It is common practice,
though by no means required,
that MBR partitions start on a cylinder boundary
(generally head 0, sector 1, but head 1, sector 1 for track 0),
and that MBR partitions also end at cylinder boundaries.