/* $OpenBSD: isakmpd.c,v 1.73 2005/02/27 13:12:12 hshoexer Exp $ */ /* $EOM: isakmpd.c,v 1.54 2000/10/05 09:28:22 niklas Exp $ */ /* * Copyright (c) 1998, 1999, 2000, 2001 Niklas Hallqvist. All rights reserved. * Copyright (c) 1999, 2000 Angelos D. Keromytis. All rights reserved. * Copyright (c) 1999, 2000, 2001 Håkan Olsson. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This code was written under funding by Ericsson Radio Systems. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "sysdep.h" #include "app.h" #include "conf.h" #include "connection.h" #include "init.h" #include "libcrypto.h" #include "log.h" #include "monitor.h" #include "sa.h" #include "timer.h" #include "transport.h" #include "udp.h" #include "udp_encap.h" #include "ui.h" #include "util.h" #include "cert.h" #ifdef USE_POLICY #include "policy.h" #endif static void usage(void); /* * Set if -d is given, currently just for running in the foreground and log * to stderr instead of syslog. */ int debug = 0; /* Set when no policy file is found. */ int acquire_only = 0; /* * If we receive a SIGHUP signal, this flag gets set to show we need to * reconfigure ASAP. */ volatile sig_atomic_t sighupped = 0; /* * If we receive a USR1 signal, this flag gets set to show we need to dump * a report over our internal state ASAP. The file to report to is settable * via the -R parameter. */ volatile sig_atomic_t sigusr1ed = 0; static char *report_file = "/var/run/isakmpd.report"; /* * If we receive a USR2 signal, this flag gets set to show we need to * rehash our SA soft expiration timers to a uniform distribution. * XXX Perhaps this is a really bad idea? */ volatile sig_atomic_t sigusr2ed = 0; /* * If we receive a TERM signal, perform a "clean shutdown" of the daemon. * This includes to send DELETE notifications for all our active SAs. * Also on recv of an INT signal (Ctrl-C out of an '-d' session, typically). */ volatile sig_atomic_t sigtermed = 0; void daemon_shutdown_now(int); /* The default path of the PID file. */ static char *pid_file = "/var/run/isakmpd.pid"; #ifdef USE_DEBUG /* The path of the IKE packet capture log file. */ static char *pcap_file = 0; #endif static void usage(void) { fprintf(stderr, "usage: %s [-4] [-6] [-a] [-c config-file] [-d] [-D class=level]\n" " [-f fifo] [-i pid-file] [-K] [-n] [-N udpencap-port]\n" " [-p listen-port] [-L] [-l packetlog-file] [-r seed]\n" " [-R report-file] [-v]\n", sysdep_progname()); exit(1); } static void parse_args(int argc, char *argv[]) { int ch; char *ep; #ifdef USE_DEBUG int cls, level; int do_packetlog = 0; #endif while ((ch = getopt(argc, argv, "46ac:dD:f:i:KnN:p:Ll:r:R:v")) != -1) { switch (ch) { case '4': bind_family |= BIND_FAMILY_INET4; break; case '6': bind_family |= BIND_FAMILY_INET6; break; case 'a': acquire_only++; break; case 'c': conf_path = optarg; break; case 'd': debug++; break; #ifdef USE_DEBUG case 'D': if (sscanf(optarg, "%d=%d", &cls, &level) != 2) { if (sscanf(optarg, "A=%d", &level) == 1) { for (cls = 0; cls < LOG_ENDCLASS; cls++) log_debug_cmd(cls, level); } else log_print("parse_args: -D argument " "unparseable: %s", optarg); } else log_debug_cmd(cls, level); break; #endif /* USE_DEBUG */ case 'f': ui_fifo = optarg; break; case 'i': pid_file = optarg; break; #ifdef USE_POLICY case 'K': ignore_policy++; break; #endif case 'n': app_none++; break; case 'N': udp_encap_default_port = optarg; break; case 'p': udp_default_port = optarg; break; #ifdef USE_DEBUG case 'l': pcap_file = optarg; /* Fallthrough intended. */ case 'L': do_packetlog++; break; #endif /* USE_DEBUG */ case 'r': seed = strtoul(optarg, &ep, 0); srandom(seed); if (*ep != '\0') log_fatal("parse_args: invalid numeric arg " "to -r (%s)", optarg); regrand = 1; break; case 'R': report_file = optarg; break; case 'v': verbose_logging = 1; break; case '?': default: usage(); } } argc -= optind; argv += optind; #ifdef USE_DEBUG if (do_packetlog && !pcap_file) pcap_file = PCAP_FILE_DEFAULT; #endif } static void sighup(int sig) { sighupped = 1; } /* Report internal state on SIGUSR1. */ static void report(void) { FILE *rfp, *old; mode_t old_umask; old_umask = umask(S_IRWXG | S_IRWXO); rfp = monitor_fopen(report_file, "w"); umask(old_umask); if (!rfp) { log_error("report: fopen (\"%s\", \"w\") failed", report_file); return; } /* Divert the log channel to the report file during the report. */ old = log_current(); log_to(rfp); ui_report("r"); log_to(old); fclose(rfp); } static void sigusr1(int sig) { sigusr1ed = 1; } /* Rehash soft expiration timers on SIGUSR2. */ static void rehash_timers(void) { #if 0 /* XXX - not yet */ log_print("SIGUSR2 received, rehashing soft expiration timers."); timer_rehash_timers(); #endif } static void sigusr2(int sig) { sigusr2ed = 1; } static int phase2_sa_check(struct sa *sa, void *arg) { return sa->phase == 2; } static int phase1_sa_check(struct sa *sa, void *arg) { return sa->phase == 1; } static void daemon_shutdown(void) { /* Perform a (protocol-wise) clean shutdown of the daemon. */ struct sa *sa; if (sigtermed == 1) { log_print("isakmpd: shutting down..."); /* * Delete all active SAs. First IPsec SAs, then ISAKMPD. * Each DELETE is another (outgoing) message. */ while ((sa = sa_find(phase2_sa_check, NULL))) sa_delete(sa, 1); while ((sa = sa_find(phase1_sa_check, NULL))) sa_delete(sa, 1); sigtermed++; } if (transport_prio_sendqs_empty()) { /* * When the prioritized transport sendq:s are empty, i.e all * the DELETE notifications have been sent, we can shutdown. */ #ifdef USE_DEBUG log_packet_stop(); #endif /* Remove FIFO and pid files. */ unlink(ui_fifo); unlink(pid_file); log_print("isakmpd: exit"); exit(0); } } /* Called on SIGTERM, SIGINT or by ui_shutdown_daemon(). */ void daemon_shutdown_now(int sig) { sigtermed = 1; } /* Write pid file. */ static void write_pid_file(void) { FILE *fp; /* Ignore errors. This will fail with USE_PRIVSEP. */ unlink(pid_file); fp = monitor_fopen(pid_file, "w"); if (fp != NULL) { if (fprintf(fp, "%ld\n", (long) getpid()) < 0) log_error("write_pid_file: failed to write PID to " "\"%.100s\"", pid_file); fclose(fp); } else log_fatal("write_pid_file: fopen (\"%.100s\", \"w\") failed", pid_file); } int main(int argc, char *argv[]) { fd_set *rfds, *wfds; int n, m; size_t mask_size; struct timeval tv, *timeout; #if defined (HAVE_CLOSEFROM) && (!defined (OpenBSD) || (OpenBSD >= 200405)) closefrom(STDERR_FILENO + 1); #else m = getdtablesize(); for (n = STDERR_FILENO + 1; n < m; n++) (void) close(n); #endif /* * Make sure init() won't alloc fd 0, 1 or 2, as daemon() will close * them. */ for (n = 0; n <= 2; n++) if (fcntl(n, F_GETFL, 0) == -1 && errno == EBADF) (void) open("/dev/null", n ? O_WRONLY : O_RDONLY, 0); for (n = 1; n < _NSIG; n++) signal(n, SIG_DFL); /* Log cmd line parsing and initialization errors to stderr. */ log_to(stderr); parse_args(argc, argv); log_init(debug); /* Open protocols and services databases. */ setprotoent(1); setservent(1); /* * Do a clean daemon shutdown on TERM/INT. These signals must be * initialized before monitor_init(). INT is only used with '-d'. */ signal(SIGTERM, daemon_shutdown_now); if (debug == 1) /* i.e '-dd' will skip this. */ signal(SIGINT, daemon_shutdown_now); /* Daemonize before forking unpriv'ed child */ if (!debug) if (daemon(0, 0)) log_fatal("main: daemon (0, 0) failed"); /* Set timezone before priv'separation */ tzset(); #if defined (USE_PRIVSEP) if (monitor_init(debug)) { /* The parent, with privileges enters infinite monitor loop. */ monitor_loop(debug); exit(0); /* Never reached. */ } /* Child process only from this point on, no privileges left. */ #endif init(); write_pid_file(); /* Reinitialize on HUP reception. */ signal(SIGHUP, sighup); /* Report state on USR1 reception. */ signal(SIGUSR1, sigusr1); /* Rehash soft expiration timers on USR2 reception. */ signal(SIGUSR2, sigusr2); #if defined (USE_DEBUG) /* If we wanted IKE packet capture to file, initialize it now. */ if (pcap_file != 0) log_packet_init(pcap_file); #endif /* Allocate the file descriptor sets just big enough. */ n = getdtablesize(); mask_size = howmany(n, NFDBITS) * sizeof(fd_mask); rfds = (fd_set *) malloc(mask_size); if (!rfds) log_fatal("main: malloc (%lu) failed", (unsigned long)mask_size); wfds = (fd_set *) malloc(mask_size); if (!wfds) log_fatal("main: malloc (%lu) failed", (unsigned long)mask_size); #if defined (USE_PRIVSEP) monitor_init_done(); #endif while (1) { /* If someone has sent SIGHUP to us, reconfigure. */ if (sighupped) { sighupped = 0; log_print("SIGHUP received"); reinit(); } /* and if someone sent SIGUSR1, do a state report. */ if (sigusr1ed) { sigusr1ed = 0; log_print("SIGUSR1 received"); report(); } /* and if someone sent SIGUSR2, do a timer rehash. */ if (sigusr2ed) { sigusr2ed = 0; log_print("SIGUSR2 received"); rehash_timers(); } /* * and if someone set 'sigtermed' (SIGTERM, SIGINT or via the * UI), this indicates we should start a controlled shutdown * of the daemon. * * Note: Since _one_ message is sent per iteration of this * enclosing while-loop, and we want to send a number of * DELETE notifications, we must loop atleast this number of * times. The daemon_shutdown() function starts by queueing * the DELETEs, all other calls just increments the * 'sigtermed' variable until it reaches a "safe" value, and * the daemon exits. */ if (sigtermed) daemon_shutdown(); /* Setup the descriptors to look for incoming messages at. */ bzero(rfds, mask_size); n = transport_fd_set(rfds); FD_SET(ui_socket, rfds); if (ui_socket + 1 > n) n = ui_socket + 1; /* * XXX Some day we might want to deal with an abstract * application class instead, with many instantiations * possible. */ if (!app_none && app_socket >= 0) { FD_SET(app_socket, rfds); if (app_socket + 1 > n) n = app_socket + 1; } /* Setup the descriptors that have pending messages to send. */ bzero(wfds, mask_size); m = transport_pending_wfd_set(wfds); if (m > n) n = m; /* Find out when the next timed event is. */ timeout = &tv; timer_next_event(&timeout); n = select(n, rfds, wfds, 0, timeout); if (n == -1) { if (errno != EINTR) { log_error("main: select"); /* * In order to give the unexpected error * condition time to resolve without letting * this process eat up all available CPU * we sleep for a short while. */ sleep(1); } } else if (n) { transport_handle_messages(rfds); transport_send_messages(wfds); if (FD_ISSET(ui_socket, rfds)) ui_handler(); if (!app_none && app_socket >= 0 && FD_ISSET(app_socket, rfds)) app_handler(); } timer_handle_expirations(); } }