/* $OpenBSD: isakmpd.c,v 1.30 2001/04/09 22:09:52 ho Exp $ */ /* $EOM: isakmpd.c,v 1.54 2000/10/05 09:28:22 niklas Exp $ */ /* * Copyright (c) 1998, 1999, 2000, 2001 Niklas Hallqvist. All rights reserved. * Copyright (c) 1999, 2000 Angelos D. Keromytis. All rights reserved. * Copyright (c) 1999, 2000 Håkan Olsson. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Ericsson Radio Systems. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This code was written under funding by Ericsson Radio Systems. */ #include #include #include #include #include #include #include #include #include #include "sysdep.h" #include "app.h" #include "conf.h" #include "connection.h" #include "init.h" #include "libcrypto.h" #include "log.h" #include "timer.h" #include "transport.h" #include "udp.h" #include "ui.h" #include "util.h" #include "cert.h" #ifdef USE_POLICY #include "policy.h" #endif /* * Set if -d is given, currently just for running in the foreground and log * to stderr instead of syslog. */ int debug = 0; /* * If we receive a SIGHUP signal, this flag gets set to show we need to * reconfigure ASAP. */ static int sighupped = 0; /* * If we receive a USR1 signal, this flag gets set to show we need to dump * a report over our internal state ASAP. The file to report to is settable * via the -R parameter. */ static int sigusr1ed = 0; static char *report_file = "/var/run/isakmpd.report"; /* The default path of the PID file. */ static char *pid_file = "/var/run/isakmpd.pid"; #ifdef USE_DEBUG /* The path of the IKE packet capture log file. */ static char *pcap_file = 0; #endif /* * If we receive a USR2 signal, this flag gets set to show we need to * rehash our SA soft expiration timers to a uniform distribution. * XXX Perhaps this is a really bad idea? */ static int sigusr2ed = 0; static void usage () { fprintf (stderr, "usage: %s [-c config-file] [-d] [-D class=level] [-f fifo]\n" " [-i pid-file] [-n] [-p listen-port] [-P local-port]\n" " [-L] [-l packetlog-file] [-r seed] [-R report-file]\n", sysdep_progname ()); exit (1); } static void parse_args (int argc, char *argv[]) { int ch; #ifdef USE_DEBUG int cls, level; int do_packetlog = 0; #endif while ((ch = getopt (argc, argv, "c:dD:f:i:np:P:Ll:r:R:")) != -1) { switch (ch) { case 'c': conf_path = optarg; break; case 'd': debug++; break; #ifdef USE_DEBUG case 'D': if (sscanf (optarg, "%d=%d", &cls, &level) != 2) { if (sscanf (optarg, "A=%d", &level) == 1) { for (cls = 0; cls < LOG_ENDCLASS; cls++) log_debug_cmd (cls, level); } else log_print ("parse_args: -D argument unparseable: %s", optarg); } else log_debug_cmd (cls, level); break; #endif /* USE_DEBUG */ case 'f': ui_fifo = optarg; break; case 'i': pid_file = optarg; break; case 'n': app_none++; break; case 'p': udp_default_port = udp_decode_port (optarg); if (!udp_default_port) exit (1); break; case 'P': udp_bind_port = udp_decode_port (optarg); if (!udp_bind_port) exit (1); break; #ifdef USE_DEBUG case 'l': pcap_file = optarg; /* Fallthrough intended. */ case 'L': do_packetlog++; break; #endif /* USE_DEBUG */ case 'r': srandom (strtoul (optarg, 0, 0)); regrand = 1; break; case 'R': report_file = optarg; break; case '?': default: usage (); } } argc -= optind; argv += optind; #ifdef USE_DEBUG if (do_packetlog && !pcap_file) pcap_file = PCAP_FILE_DEFAULT; #endif } /* Reinitialize after a SIGHUP reception. */ static void reinit (void) { log_print ("SIGHUP recieved, reinitializing daemon."); /* * XXX Remove all(/some?) pending exchange timers? - they may not be * possible to complete after we've re-read the config file. * User-initiated SIGHUP's maybe "authorizes" a wait until * next connection-check. * XXX This means we discard exchange->last_msg, is this really ok? */ /* Reinitialize PRNG if we are in deterministic mode. */ if (regrand) srandom (strtoul (optarg, 0, 0)); /* Reread config file. */ conf_reinit (); /* Try again to link in libcrypto (good if we started without /usr). */ libcrypto_init (); /* Set timezone */ tzset (); #ifdef USE_POLICY /* Reread the policies. */ policy_init (); #endif /* Reinitialize certificates */ cert_init (); /* Reinitialize our connection list. */ connection_reinit (); /* * XXX Rescan interfaces. * transport_reinit (); * udp_reinit (); */ /* * XXX "These" (non-existant) reinitializations should not be done. * cookie_reinit (); * ui_reinit (); * sa_reinit (); */ sighupped = 0; } static void sighup (int sig) { sighupped = 1; } /* Report internal state on SIGUSR1. */ static void report (void) { FILE *report, *old; mode_t old_umask; old_umask = umask (S_IRWXG | S_IRWXO); report = fopen (report_file, "w"); umask (old_umask); if (!report) { log_error ("fopen (\"%s\", \"w\") failed", report_file); return; } /* Divert the log channel to the report file during the report. */ old = log_current (); log_to (report); ui_report ("r"); log_to (old); fclose (report); sigusr1ed = 0; } static void sigusr1 (int sig) { sigusr1ed = 1; } /* Rehash soft expiration timers on SIGUSR2. */ static void rehash_timers (void) { #if 0 /* XXX - not yet */ log_print ("SIGUSR2 received, rehasing soft expiration timers."); timer_rehash_timers (); #endif sigusr2ed = 0; } static void sigusr2 (int sig) { sigusr2ed = 1; } /* Write pid file. */ static void write_pid_file (void) { FILE *fp; /* Ignore errors. */ unlink (pid_file); fp = fopen (pid_file, "w"); if (fp != NULL) { /* XXX Error checking! */ fprintf (fp, "%d\n", getpid ()); fclose (fp); } else log_fatal ("main: fopen (\"%s\", \"w\") failed", pid_file); } int main (int argc, char *argv[]) { fd_set *rfds, *wfds; int n, m; size_t mask_size; struct timeval tv, *timeout; parse_args (argc, argv); init (); if (!debug) { if (daemon (0, 0)) log_fatal ("main: daemon (0, 0) failed"); /* Switch to syslog. */ log_to (0); } write_pid_file (); /* Reinitialize on HUP reception. */ signal (SIGHUP, sighup); /* Report state on USR1 reception. */ signal (SIGUSR1, sigusr1); /* Rehash soft expiration timers on USR2 reception. */ signal (SIGUSR2, sigusr2); #ifdef USE_DEBUG /* If we wanted IKE packet capture to file, initialize it now. */ if (pcap_file != 0) log_packet_init (pcap_file); #endif /* Allocate the file descriptor sets just big enough. */ n = getdtablesize (); mask_size = howmany (n, NFDBITS) * sizeof (fd_mask); rfds = (fd_set *)malloc (mask_size); if (!rfds) log_fatal ("main: malloc (%d) failed", mask_size); wfds = (fd_set *)malloc (mask_size); if (!wfds) log_fatal ("main: malloc (%d) failed", mask_size); while (1) { /* If someone has sent SIGHUP to us, reconfigure. */ if (sighupped) reinit (); /* and if someone sent SIGUSR1, do a state report. */ if (sigusr1ed) report (); /* and if someone sent SIGUSR2, do a timer rehash. */ if (sigusr2ed) rehash_timers (); /* Setup the descriptors to look for incoming messages at. */ memset (rfds, 0, mask_size); n = transport_fd_set (rfds); FD_SET (ui_socket, rfds); if (ui_socket + 1 > n) n = ui_socket + 1; /* * XXX Some day we might want to deal with an abstract application * class instead, with many instantiations possible. */ if (!app_none && app_socket >= 0) { FD_SET (app_socket, rfds); if (app_socket + 1 > n) n = app_socket + 1; } /* Setup the descriptors that have pending messages to send. */ memset (wfds, 0, mask_size); m = transport_pending_wfd_set (wfds); if (m > n) n = m; /* Find out when the next timed event is. */ timeout = &tv; timer_next_event (&timeout); n = select (n, rfds, wfds, 0, timeout); if (n == -1) { if (errno != EINTR) { log_error ("select"); /* * In order to give the unexpected error condition time to * resolve without letting this process eat up all available CPU * we sleep for a short while. */ sleep (1); } } else if (n) { transport_handle_messages (rfds); transport_send_messages (wfds); if (FD_ISSET (ui_socket, rfds)) ui_handler (); if (!app_none && app_socket >= 0 && FD_ISSET (app_socket, rfds)) app_handler (); } timer_handle_expirations (); } }