/* $OpenBSD: sa.h,v 1.48 2006/06/02 19:35:55 hshoexer Exp $ */ /* $EOM: sa.h,v 1.58 2000/10/10 12:39:01 provos Exp $ */ /* * Copyright (c) 1998, 1999, 2001 Niklas Hallqvist. All rights reserved. * Copyright (c) 1999, 2001 Angelos D. Keromytis. All rights reserved. * Copyright (c) 2004 Håkan Olsson. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This code was written under funding by Ericsson Radio Systems. */ #ifndef _SA_H_ #define _SA_H_ #include #include #include #include #include "isakmp.h" /* Remove a SA if it has not been fully negotiated in this time. */ #define SA_NEGOTIATION_MAX_TIME 120 struct doi; struct event; struct exchange; struct keystate; struct message; struct payload; struct proto_attr; struct sa; struct transport; /* A protection suite consists of a set of protocol descriptions like this. */ struct proto { /* Link to the next protocol in the suite. */ TAILQ_ENTRY(proto) link; /* The SA we belong to. */ struct sa *sa; /* The protocol number as found in the proposal payload. */ u_int8_t no; /* The protocol this SA is for. */ u_int8_t proto; /* * Security parameter index info. Element 0 - outgoing, 1 - * incoming. */ u_int8_t spi_sz[2]; u_int8_t *spi[2]; /* * The chosen transform, only valid while the incoming SA payload that * held it is available for duplicate testing. */ struct payload *chosen; /* The chosen transform's ID. */ u_int8_t id; /* DOI-specific data. */ void *data; /* Proposal transforms data, for validating the responders selection. */ TAILQ_HEAD(proto_attr_head, proto_attr) xfs; size_t xf_cnt; }; struct proto_attr { /* Link to next transform. */ TAILQ_ENTRY(proto_attr) next; /* Transform attribute data and size, suitable for attribute_map(). */ u_int8_t *attrs; size_t len; }; struct sa { /* Link to SAs with the same hash value. */ LIST_ENTRY(sa) link; /* * When several SA's are being negotiated in one message we connect * them through this link. */ TAILQ_ENTRY(sa) next; /* * A name of the major policy deciding offers and acceptable * proposals. */ char *name; /* The transport this SA got negotiated over. */ struct transport *transport; /* Both initiator and responder cookies. */ u_int8_t cookies[ISAKMP_HDR_COOKIES_LEN]; /* The message ID signifying non-ISAKMP SAs. */ u_int8_t message_id[ISAKMP_HDR_MESSAGE_ID_LEN]; /* The protection suite chosen. */ TAILQ_HEAD(proto_head, proto) protos; /* The exchange type we should use when rekeying. */ u_int8_t exch_type; /* Phase is 1 for ISAKMP SAs, and 2 for application ones. */ u_int8_t phase; /* A reference counter for this structure. */ u_int16_t refcnt; /* Various flags, look below for descriptions. */ u_int32_t flags; /* The DOI that is to handle DOI-specific issues for this SA. */ struct doi *doi; /* * Crypto info needed to encrypt/decrypt packets protected by this * SA. */ struct keystate *keystate; /* IDs from Phase 1 */ u_int8_t *id_i; size_t id_i_len; u_int8_t *id_r; size_t id_r_len; /* Set if we were the initiator of the SA/exchange in Phase 1 */ int initiator; /* Policy session ID, where applicable, copied over from the exchange */ int policy_id; /* * The key used to authenticate phase 1, in printable format, used * only by KeyNote. */ char *keynote_key; /* * Certificates or other information from Phase 1; these are copied * from the exchange, so look at exchange.h for an explanation of * their use. */ int recv_certtype, recv_keytype; /* Certificate received from peer, native format. */ void *recv_cert; /* Key peer used to authenticate, native format. */ void *recv_key; /* * Certificates or other information we used to authenticate to the * peer, Phase 1. */ int sent_certtype; /* Certificate (to be) sent to peer, native format. */ void *sent_cert; /* DOI-specific opaque data. */ void *data; /* Lifetime data. */ u_int64_t seconds; u_int64_t kilobytes; /* ACQUIRE sequence number */ u_int32_t seq; /* The events that will occur when an SA has timed out. */ struct event *soft_death; struct event *death; struct event *nat_t_keepalive; /* IKE DPD (RFC3706) message sequence number. */ u_int32_t dpd_seq; /* sent */ u_int32_t dpd_rseq; /* received */ u_int32_t dpd_failcount; /* # of subsequent failures */ u_int32_t dpd_rdupcount; /* # of subsequent duplicates */ struct event *dpd_event; /* time of next event */ }; /* This SA is alive. */ #define SA_FLAG_READY 0x01 /* Renegotiate the SA at each expiry. */ #define SA_FLAG_STAYALIVE 0x02 /* Establish the SA when it is needed. */ #define SA_FLAG_ONDEMAND 0x04 /* This SA has been replaced by another newer one. */ #define SA_FLAG_REPLACED 0x08 /* This SA has seen a soft timeout and wants to be renegotiated on use. */ #define SA_FLAG_FADING 0x10 /* This SA should always be actively renegotiated (with us as initiator). */ #define SA_FLAG_ACTIVE_ONLY 0x20 /* This SA flag is a placeholder for a TRANSACTION exchange "SA flag". */ #define SA_FLAG_IKECFG 0x40 /* This SA flag indicates if we should do DPD with the phase 1 SA peer. */ #define SA_FLAG_DPD 0x80 /* NAT-T encapsulation state. Kept in isakmp_sa for the new p2 exchange. */ #define SA_FLAG_NAT_T_ENABLE 0x100 #define SA_FLAG_NAT_T_KEEPALIVE 0x200 extern void proto_free(struct proto * proto); extern int sa_add_transform(struct sa *, struct payload *, int, struct proto **); extern int sa_create(struct exchange *, struct transport *); extern int sa_enter(struct sa *); extern void sa_delete(struct sa *, int); extern void sa_teardown_all(void); extern struct sa *sa_find(int (*) (struct sa *, void *), void *); extern int sa_flag(char *); extern void sa_free(struct sa *); extern void sa_init(void); extern void sa_reinit(void); extern struct sa *sa_isakmp_lookup_by_peer(struct sockaddr *, socklen_t); extern void sa_isakmp_upgrade(struct message *); extern struct sa *sa_lookup(u_int8_t *, u_int8_t *); extern struct sa *sa_lookup_by_peer(struct sockaddr *, socklen_t, int); extern struct sa *sa_lookup_by_header(u_int8_t *, int); extern struct sa *sa_lookup_by_name(char *, int); extern struct sa *sa_lookup_from_icookie(u_int8_t *); extern struct sa *sa_lookup_isakmp_sa(struct sockaddr *, u_int8_t *); extern void sa_mark_replaced(struct sa *); extern void sa_reference(struct sa *); extern void sa_release(struct sa *); extern void sa_remove(struct sa *); extern void sa_report(void); extern void sa_dump(int, int, char *, struct sa *); extern void sa_report_all(FILE *); extern int sa_setup_expirations(struct sa *); /* * This structure contains most of the data of the in-kernel SA. * Currently only used to collect the tdb_last_used time for DPD. */ struct sa_kinfo { u_int32_t flags; /* /usr/include/netinet/ip_ipsp.h */ u_int32_t exp_allocations; u_int32_t soft_allocations; u_int32_t cur_allocations; u_int64_t exp_bytes; u_int64_t soft_bytes; u_int64_t cur_bytes; u_int64_t exp_timeout; u_int64_t soft_timeout; u_int64_t first_use; u_int64_t established; u_int64_t soft_first_use; u_int64_t exp_first_use; u_int64_t last_used; struct sockaddr_storage dst; struct sockaddr_storage src; struct sockaddr_storage proxy; u_int32_t spi; u_int16_t udpencap_port; u_int8_t wnd; }; #endif /* _SA_H_ */