/* $OpenBSD: ui.c,v 1.16 2000/05/02 14:37:00 niklas Exp $ */ /* $EOM: ui.c,v 1.41 2000/05/01 20:57:33 niklas Exp $ */ /* * Copyright (c) 1998, 1999, 2000 Niklas Hallqvist. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Ericsson Radio Systems. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This code was written under funding by Ericsson Radio Systems. */ #include #include #include #include #include #include #include #include "sysdep.h" #include "conf.h" #include "connection.h" #include "doi.h" #include "exchange.h" #include "isakmp.h" #include "log.h" #include "sa.h" #include "timer.h" #include "transport.h" #include "ui.h" #include "util.h" #define BUF_SZ 256 char *ui_fifo = FIFO; int ui_socket; /* Create and open the FIFO used for user control. */ void ui_init () { struct stat st; /* -f- means control messages comes in via stdin. */ if (strcmp (ui_fifo, "-") == 0) ui_socket = 0; else { /* Don't overwrite a file, i.e '-f /etc/isakmpd/isakmpd.conf'. */ if (lstat (ui_fifo, &st) == 0) if ((st.st_mode & S_IFMT) == S_IFREG) { errno = EEXIST; log_fatal ("ui_init: could not create FIFO \"%s\"", ui_fifo); } /* No need to know about errors. */ unlink (ui_fifo); if (mkfifo (ui_fifo, 0600) == -1) log_fatal ("ui_init: mkfifo (\"%s\", 0600) failed"); /* XXX Is O_RDWR needed on some OSes? Photurisd seems to imply that. */ ui_socket = open (ui_fifo, O_RDONLY | O_NONBLOCK, 0); if (ui_socket == -1) log_fatal ("ui_init: open (\"%s\", O_RDONLY | O_NONBLOCK, 0) failed", ui_fifo); } } /* * Setup a phase 2 connection. * XXX Maybe phase 1 works too, but teardown won't work then, fix? */ static void ui_connect (char *cmd) { char name[81]; if (sscanf (cmd, "c %80s", name) != 1) { log_print ("ui_connect: command \"%s\" malformed", cmd); return; } connection_setup (name); } /* Tear down a phase 2 connection. */ static void ui_teardown (char *cmd) { char name[81]; struct sa *sa; if (sscanf (cmd, "t %80s", name) != 1) { log_print ("ui_teardown: command \"%s\" malformed", cmd); return; } connection_teardown (name); while ((sa = sa_lookup_by_name (name, 2)) != 0) sa_delete (sa, 1); } /* * Call the configuration API. * XXX Error handling! How to do multi-line transactions? Too short arbitrary * limit on the parameters? */ static void ui_config (char *cmd) { char subcmd[81], section[81], tag[81], value[81]; int override, trans = 0; if (sscanf (cmd, "C %80s", subcmd) != 1) goto fail; trans = conf_begin (); if (strcasecmp (subcmd, "set") == 0) { if (sscanf (cmd, "C %*s [%80[^]]]:%80[^=]=%80s %d", section, tag, value, &override) != 4) goto fail; conf_set (trans, section, tag, value, override, 0); } else if (strcasecmp (subcmd, "rm") == 0) { if (sscanf (cmd, "C %*s [%80[^]]]:%80s", section, tag) != 2) goto fail; conf_remove (trans, section, tag); } else if (strcasecmp (subcmd, "rms") == 0) { if (sscanf (cmd, "C %*s [%80[^]]]", section) != 1) goto fail; conf_remove_section (trans, section); } else goto fail; conf_end (trans, 1); return; fail: if (trans) conf_end (trans, 0); log_print ("ui_config: command \"%s\" malformed", cmd); } static void ui_delete (char *cmd) { char cookies_str[ISAKMP_HDR_COOKIES_LEN * 2 + 1]; char message_id_str[ISAKMP_HDR_MESSAGE_ID_LEN * 2 + 1]; u_int8_t cookies[ISAKMP_HDR_COOKIES_LEN]; u_int8_t message_id_buf[ISAKMP_HDR_MESSAGE_ID_LEN]; u_int8_t *message_id = message_id_buf; struct sa *sa; if (sscanf (cmd, "d %32s %8s", cookies_str, message_id_str) != 2) { log_print ("ui_delete: command \"%s\" malformed", cmd); return; } if (strcmp (message_id_str, "-") == 0) message_id = 0; if (hex2raw (cookies_str, cookies, ISAKMP_HDR_COOKIES_LEN) == -1 || (message_id && hex2raw (message_id_str, message_id_buf, ISAKMP_HDR_MESSAGE_ID_LEN) == -1)) { log_print ("ui_delete: command \"%s\" has bad arguments", cmd); return; } sa = sa_lookup (cookies, message_id); if (!sa) { log_print ("ui_delete: command \"%s\" found no SA", cmd); return; } sa_delete (sa, 1); } #ifdef USE_DEBUG /* Parse the debug command found in CMD. */ static void ui_debug (char *cmd) { int cls, level; if (sscanf (cmd, "D %d %d", &cls, &level) != 2) { log_print ("ui_debug: command \"%s\" malformed", cmd); return; } log_debug_cmd (cls, level); } #endif /* USE_DEBUG */ /* Report SAs and ongoing exchanges. */ void ui_report (char *cmd) { /* XXX Skip 'cmd' as arg? */ sa_report (); exchange_report (); transport_report (); connection_report (); timer_report (); conf_report (); } /* * Call the relevant command handler based on the first character of the * line (the command). */ static void ui_handle_command (char *line) { /* Find out what one-letter command was sent. */ switch (line[0]) { case 'c': ui_connect (line); break; case 'C': ui_config (line); break; case 'd': ui_delete (line); break; #ifdef USE_DEBUG case 'D': ui_debug (line); break; #endif case 'r': ui_report (line); break; case 't': ui_teardown (line); break; default: log_print ("ui_handle_messages: unrecognized command: '%c'", line[0]); } } /* * A half-complex implementation of reading from a file descriptor * line by line without resorting to stdio which apparently have * troubles with non-blocking fifos. */ void ui_handler () { static char *buf = 0; static char *p; static size_t sz; static size_t resid; size_t n; char *new_buf; /* If no buffer, set it up. */ if (!buf) { sz = BUF_SZ; buf = malloc (sz); if (!buf) { log_print ("ui_handler: malloc (%d) failed", sz); return; } p = buf; resid = sz; } /* If no place left in the buffer reallocate twice as large. */ if (!resid) { new_buf = realloc (buf, sz * 2); if (!new_buf) { log_print ("ui_handler: realloc (%p, %d) failed", buf, sz * 2); free (buf); buf = 0; return; } buf = new_buf; p = buf + sz; resid = sz; sz *= 2; } n = read (ui_socket, p, resid); if (n == -1) { log_error ("ui_handler: read (%d, %p, %d)", ui_socket, p, resid); return; } if (!n) return; resid -= n; while (n--) { /* * When we find a newline, cut off the line and feed it to the * command processor. Then move the rest up-front. */ if (*p == '\n') { *p = '\0'; ui_handle_command (buf); memcpy (buf, p + 1, n); p = buf; resid = sz - n; continue; } p++; } }