/* $OpenBSD: ui.c,v 1.47 2005/11/14 23:25:11 deraadt Exp $ */ /* $EOM: ui.c,v 1.43 2000/10/05 09:25:12 niklas Exp $ */ /* * Copyright (c) 1998, 1999, 2000 Niklas Hallqvist. All rights reserved. * Copyright (c) 1999, 2000, 2001, 2002 Håkan Olsson. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This code was written under funding by Ericsson Radio Systems. */ #include #include #include #include #include #include #include #include #include #include #include "conf.h" #include "connection.h" #include "doi.h" #include "exchange.h" #include "init.h" #include "isakmp.h" #include "log.h" #include "monitor.h" #include "sa.h" #include "timer.h" #include "transport.h" #include "ui.h" #include "util.h" #define BUF_SZ 256 /* from isakmpd.c */ void daemon_shutdown_now(int); /* Report all SA configuration information. */ void ui_report_sa(char *); static FILE *ui_open_result(void); char *ui_fifo = FIFO; int ui_socket; struct event *ui_cr_event = NULL; /* Create and open the FIFO used for user control. */ void ui_init(void) { struct stat st; /* -f- means control messages comes in via stdin. */ if (strcmp(ui_fifo, "-") == 0) { ui_socket = 0; return; } /* Don't overwrite a file, i.e '-f /etc/isakmpd/isakmpd.conf'. */ if (lstat(ui_fifo, &st) == 0) { if ((st.st_mode & S_IFMT) == S_IFREG) { errno = EEXIST; log_fatal("ui_init: could not create FIFO \"%s\"", ui_fifo); } } /* No need to know about errors. */ unlink(ui_fifo); if (mkfifo(ui_fifo, 0600) == -1) log_fatal("ui_init: mkfifo (\"%s\", 0600) failed", ui_fifo); ui_socket = open(ui_fifo, O_RDWR | O_NONBLOCK, 0); if (ui_socket == -1) log_fatal("ui_init: open (\"%s\", O_RDWR | O_NONBLOCK, 0) " "failed", ui_fifo); } /* * Setup a phase 2 connection. * XXX Maybe phase 1 works too, but teardown won't work then, fix? */ static void ui_connect(char *cmd) { char name[81]; if (sscanf(cmd, "c %80s", name) != 1) { log_print("ui_connect: command \"%s\" malformed", cmd); return; } LOG_DBG((LOG_UI, 10, "ui_connect: setup connection \"%s\"", name)); connection_setup(name); } /* Tear down a connection, can be phase 1 or 2. */ static void ui_teardown(char *cmd) { struct sockaddr_in addr; struct sockaddr_in6 addr6; struct sa *sa; int phase; char name[81]; /* If no phase is given, we default to phase 2. */ phase = 2; if (sscanf(cmd, "t main %80s", name) == 1) phase = 1; else if (sscanf(cmd, "t quick %80s", name) == 1) phase = 2; else if (sscanf(cmd, "t %80s", name) != 1) { log_print("ui_teardown: command \"%s\" malformed", cmd); return; } LOG_DBG((LOG_UI, 10, "ui_teardown: teardown connection \"%s\", " "phase %d", name, phase)); bzero(&addr, sizeof(addr)); bzero(&addr6, sizeof(addr6)); if (inet_pton(AF_INET, name, &addr.sin_addr) == 1) { addr.sin_len = sizeof(addr); addr.sin_family = AF_INET; while ((sa = sa_lookup_by_peer((struct sockaddr *)&addr, SA_LEN((struct sockaddr *)&addr), phase)) != 0) { if (sa->name) connection_teardown(sa->name); sa_delete(sa, 1); } } else if (inet_pton(AF_INET6, name, &addr6.sin6_addr) == 1) { addr6.sin6_len = sizeof(addr6); addr6.sin6_family = AF_INET6; while ((sa = sa_lookup_by_peer((struct sockaddr *)&addr6, SA_LEN((struct sockaddr *)&addr6), phase)) != 0) { if (sa->name) connection_teardown(sa->name); sa_delete(sa, 1); } } else { if (phase == 2) connection_teardown(name); while ((sa = sa_lookup_by_name(name, phase)) != 0) sa_delete(sa, 1); } } /* Tear down all phase 2 connections. */ static void ui_teardown_all(char *cmd) { /* Skip 'cmd' as arg. */ sa_teardown_all(); } static void ui_conn_reinit_event(void *v) { /* * This event is required for isakmpd to reinitialize the connection * and passive-connection lists. Otherwise a change to the * "[Phase 2]:Connections" tag will not have any effect. */ connection_reinit(); ui_cr_event = NULL; } static void ui_conn_reinit(void) { struct timeval tv; if (ui_cr_event) timer_remove_event(ui_cr_event); gettimeofday(&tv, 0); tv.tv_sec += 5; ui_cr_event = timer_add_event("ui_conn_reinit", ui_conn_reinit_event, 0, &tv); if (!ui_cr_event) log_print("ui_conn_reinit: timer_add_event() failed. " "Connections will not be updated."); } /* * Call the configuration API. * XXX Error handling! How to do multi-line transactions? Too short arbitrary * limit on the parameters? */ static void ui_config(char *cmd) { char subcmd[81], section[81], tag[81], value[81], tmp[81]; char *v, *nv; int trans = 0, items; FILE *fd; if (sscanf(cmd, "C %80s", subcmd) != 1) goto fail; if (strcasecmp(subcmd, "get") == 0) { if (sscanf(cmd, "C %*s [%80[^]]]:%80s", section, tag) != 2) goto fail; v = conf_get_str(section, tag); fd = ui_open_result(); if (fd) { if (v) fprintf(fd, "%s\n", v); fclose(fd); } LOG_DBG((LOG_UI, 30, "ui_config: \"%s\"", cmd)); return; } trans = conf_begin(); if (strcasecmp(subcmd, "set") == 0) { items = sscanf(cmd, "C %*s [%80[^]]]:%80[^=]=%80s %80s", section, tag, value, tmp); if (!(items == 3 || items == 4)) goto fail; conf_set(trans, section, tag, value, items == 4 ? 1 : 0, 0); if (strcasecmp(section, "Phase 2") == 0 && (strcasecmp(tag, "Connections") == 0 || strcasecmp(tag, "Passive-connections") == 0)) ui_conn_reinit(); } else if (strcasecmp(subcmd, "add") == 0) { items = sscanf(cmd, "C %*s [%80[^]]]:%80[^=]=%80s %80s", section, tag, value, tmp); if (!(items == 3 || items == 4)) goto fail; v = conf_get_str(section, tag); if (!v) conf_set(trans, section, tag, value, 1, 0); else { /* Add the new value to the end of the 'v' list. */ if (asprintf(&nv, v[strlen(v) - 1] == ',' ? "%s%s" : "%s,%s", v, value) == -1) { log_error("ui_config: malloc() failed"); if (trans) conf_end(trans, 0); return; } conf_set(trans, section, tag, nv, 1, 0); free(nv); } if (strcasecmp(section, "Phase 2") == 0 && (strcasecmp(tag, "Connections") == 0 || strcasecmp(tag, "Passive-connections") == 0)) ui_conn_reinit(); } else if (strcasecmp(subcmd, "rm") == 0) { if (sscanf(cmd, "C %*s [%80[^]]]:%80s", section, tag) != 2) goto fail; conf_remove(trans, section, tag); } else if (strcasecmp(subcmd, "rms") == 0) { if (sscanf(cmd, "C %*s [%80[^]]]", section) != 1) goto fail; conf_remove_section(trans, section); } else goto fail; LOG_DBG((LOG_UI, 30, "ui_config: \"%s\"", cmd)); conf_end(trans, 1); return; fail: if (trans) conf_end(trans, 0); log_print("ui_config: command \"%s\" malformed", cmd); } static void ui_delete(char *cmd) { char cookies_str[ISAKMP_HDR_COOKIES_LEN * 2 + 1]; char message_id_str[ISAKMP_HDR_MESSAGE_ID_LEN * 2 + 1]; u_int8_t cookies[ISAKMP_HDR_COOKIES_LEN]; u_int8_t message_id_buf[ISAKMP_HDR_MESSAGE_ID_LEN]; u_int8_t *message_id = message_id_buf; struct sa *sa; if (sscanf(cmd, "d %32s %8s", cookies_str, message_id_str) != 2) { log_print("ui_delete: command \"%s\" malformed", cmd); return; } if (strcmp(message_id_str, "-") == 0) message_id = 0; if (hex2raw(cookies_str, cookies, ISAKMP_HDR_COOKIES_LEN) == -1 || (message_id && hex2raw(message_id_str, message_id_buf, ISAKMP_HDR_MESSAGE_ID_LEN) == -1)) { log_print("ui_delete: command \"%s\" has bad arguments", cmd); return; } sa = sa_lookup(cookies, message_id); if (!sa) { log_print("ui_delete: command \"%s\" found no SA", cmd); return; } LOG_DBG((LOG_UI, 20, "ui_delete: deleting SA for cookie \"%s\" msgid \"%s\"", cookies_str, message_id_str)); sa_delete(sa, 1); } /* Parse the debug command found in CMD. */ static void ui_debug(char *cmd) { int cls, level; char subcmd[3]; if (sscanf(cmd, "D %d %d", &cls, &level) == 2) { log_debug_cmd(cls, level); return; } else if (sscanf(cmd, "D %2s %d", subcmd, &level) == 2) { switch (subcmd[0]) { case 'A': for (cls = 0; cls < LOG_ENDCLASS; cls++) log_debug_cmd(cls, level); return; } } else if (sscanf(cmd, "D %2s", subcmd) == 1) { switch (subcmd[0]) { case 'T': log_debug_toggle(); return; } } log_print("ui_debug: command \"%s\" malformed", cmd); } static void ui_packetlog(char *cmd) { char subcmd[81]; if (sscanf(cmd, "p %80s", subcmd) != 1) goto fail; if (strncasecmp(subcmd, "on=", 3) == 0) { /* Start capture to a new file. */ if (subcmd[strlen(subcmd) - 1] == '\n') subcmd[strlen(subcmd) - 1] = 0; log_packet_restart(subcmd + 3); } else if (strcasecmp(subcmd, "on") == 0) log_packet_restart(NULL); else if (strcasecmp(subcmd, "off") == 0) log_packet_stop(); return; fail: log_print("ui_packetlog: command \"%s\" malformed", cmd); } static void ui_shutdown_daemon(char *cmd) { if (strlen(cmd) == 1) { log_print("ui_shutdown_daemon: received shutdown command"); daemon_shutdown_now(0); } else log_print("ui_shutdown_daemon: command \"%s\" malformed", cmd); } /* Report SAs and ongoing exchanges. */ void ui_report(char *cmd) { /* XXX Skip 'cmd' as arg? */ sa_report(); exchange_report(); transport_report(); connection_report(); timer_report(); conf_report(); } /* Report all SA configuration information. */ void ui_report_sa(char *cmd) { /* Skip 'cmd' as arg? */ FILE *fd = ui_open_result(); if (!fd) return; sa_report_all(fd); fclose(fd); } /* * Call the relevant command handler based on the first character of the * line (the command). */ static void ui_handle_command(char *line) { /* Find out what one-letter command was sent. */ switch (line[0]) { case 'c': ui_connect(line); break; case 'C': ui_config(line); break; case 'd': ui_delete(line); break; case 'D': ui_debug(line); break; case 'p': ui_packetlog(line); break; case 'Q': ui_shutdown_daemon(line); break; case 'R': reinit(); break; case 'S': ui_report_sa(line); break; case 'r': ui_report(line); break; case 't': ui_teardown(line); break; case 'T': ui_teardown_all(line); break; default: log_print("ui_handle_messages: unrecognized command: '%c'", line[0]); } } /* * A half-complex implementation of reading from a file descriptor * line by line without resorting to stdio which apparently have * troubles with non-blocking fifos. */ void ui_handler(void) { static char *buf = 0; static char *p; static size_t sz; static size_t resid; ssize_t n; char *new_buf; /* If no buffer, set it up. */ if (!buf) { sz = BUF_SZ; buf = malloc(sz); if (!buf) { log_print("ui_handler: malloc (%lu) failed", (unsigned long)sz); return; } p = buf; resid = sz; } /* If no place left in the buffer reallocate twice as large. */ if (!resid) { new_buf = realloc(buf, sz * 2); if (!new_buf) { log_print("ui_handler: realloc (%p, %lu) failed", buf, (unsigned long)sz * 2); free(buf); buf = 0; return; } buf = new_buf; p = buf + sz; resid = sz; sz *= 2; } n = read(ui_socket, p, resid); if (n == -1) { log_error("ui_handler: read (%d, %p, %lu)", ui_socket, p, (unsigned long)resid); return; } if (!n) return; resid -= n; while (n--) { /* * When we find a newline, cut off the line and feed it to the * command processor. Then move the rest up-front. */ if (*p == '\n') { *p = '\0'; ui_handle_command(buf); memcpy(buf, p + 1, n); p = buf; resid = sz - n; continue; } p++; } } static FILE * ui_open_result(void) { FILE *fd = monitor_fopen(RESULT_FILE, "w"); if (!fd) log_error("ui_open_result: fopen() failed"); return fd; }