.\" $OpenBSD: lmccontrol.8,v 1.21 2007/05/31 19:19:45 jmc Exp $ .\" .\" Copyright (c) 1997-1999 LAN Media Corporation (LMC) .\" All rights reserved. www.lanmedia.com .\" .\" This code is written by Michael Graff for LMC. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above .\" copyright notice, this list of conditions and the following disclaimer .\" in the documentation and/or other materials provided with the .\" distribution. .\" 3. All marketing or advertising materials mentioning features or .\" use of this software must display the following acknowledgement: .\" This product includes software developed by LAN Media Corporation .\" and its contributors. .\" 4. Neither the name of LAN Media Corporation nor the names of its .\" contributors may be used to endorse or promote products derived .\" from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY LAN MEDIA CORPORATION AND CONTRIBUTORS .\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED .\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR .\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" .Dd $Mdocdate: May 31 2007 $ .Dt LMCCONTROL 8 .Os .Sh NAME .Nm lmccontrol .Nd configure Lan Media Corporation SSI/HSSI/T1/T3 devices .Sh SYNOPSIS .Nm lmccontrol .Op Fl CcEeKkOoSs .Op Fl l Ar speed .Op Ar interface .Sh DESCRIPTION The .Nm command controls the operation of the Lan Media devices via the .Xr lmc 4 driver. Most of the parameters that can be changed relate to the line characteristics or layer 2 protocol options. You can adjust layer 2 protocol keepalives, and line speed. Line characteristics which can be adjusted include CRC length, internal or external clock source, DS3 scrambler, and DS3 cable length. .Pp This program controls the Lan Media SSI, HSSI, T1, and DS3 network interfaces. The SSI is the LMC1000, and runs at various speeds up to 10Mbps. It requires an external CSU/DSU for operation on T1/E1 lines. The HSSI card is the LMC5000, and runs at various speeds up to 52Mbps. It requires an external DSU for operation on DS3 lines. The DS3 is the LMC5245 and runs at a speed of 45Mbps. It has no internal clock generator, and does not require external DSU for DS3 operation. The T1 card is the LMC1200 and runs at a speed of 1.544Mbps or 2Mbps for E1 operation, without CSU/DSU. .Pp The .Nm command given without any additional flags retrieves the current card settings from the driver and prints them out. .Pp The options are as follows: .Bl -tag -width Ds .It Fl C Set the interface to use internal clocking. On the SSI card this uses the internal baud rate generator. On the HSSI card it uses the PCI bus clock. This is only valid for SSI/HSSI cards. .It Fl c Sets the interface to use an external clock source. This is only valid for SSI/HSSI cards. .It Fl E Sets 32-bit CRC. .It Fl e Sets 16-bit CRC. .It Fl K Disables layer 2 keepalive. .It Fl k Enables layer 2 keepalive. .It Fl l Ar speed To manually specify line speed, in bits per second (for devices without built-in CSU/DSU). .It Fl O Program the DS3 card for cable length for over 100 feet in length (higher power). .It Fl o Program the DS3 card for cable lengths of less than 100 feet. In this mode, the card uses lower power to transmit data for short cable runs, which might otherwise overdrive a receiver. This is the default, and will work in most situations even with runs more than 100 feet. .It Fl S Turn DS3 scrambler on. .It Fl s Turn DS3 scrambler off. .It Ar interface The interface name of the Lan Media card (default is lmc0). .El .Sh EXAMPLES Set an SSI card for a speed of 2048000 bits/sec with HDLC keepalive off: .Pp .Dl # lmccontrol lmc0 -l 2048000 -K .Sh SEE ALSO .Xr lmc 4 , .Xr sppp 4 , .Xr hostname.if 5 , .Xr ifconfig 8 .Sh HISTORY The .Nm utility first appeared in .Ox 2.8 . .Sh AUTHORS The .Nm utility was written by .An Michael Graff Aq explorer@vix.com .