.\"	$OpenBSD: nmeaattach.8,v 1.3 2006/10/27 16:05:27 mbalmer Exp $
.\"
.\" Copyright (c) 2006 Marc Balmer <mbalmer@openbsd.org>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd June 12, 2006
.Dt NMEAATTACH 8
.Os
.Sh NAME
.Nm nmeaattach
.Nd attach serial lines as timedelta sensors
.Sh SYNOPSIS
.Nm nmeaattach
.Op Fl dhm
.Op Fl s Ar baudrate
.Op Fl t Ar cond
.Ar device
.Sh DESCRIPTION
.Nm
is used to designate a serial line with a NMEA 0183 device as a source of
timedelta sensors.
The following operands are supported by
.Nm nmeaattach :
.Bl -tag -width Ar
.It Fl d
Do not daemonize.
.It Fl h
Turn on RTS/CTS flow control.
By default, no flow control is done.
.It Fl m
Maintain modem control signals after closing the line.
Specifically, this disables HUPCL.
.It Fl s Ar baudrate
Specifies the speed of the connection.
If not specified, the default of 4800 baud is used.
.It Fl t Ar cond
Chooses the condition which will cause the current system
time to be immediately copied to the terminal timestamp storage.
Only one can be used.
.Pp
.Bl -tag -width DCDXX -offset indent -compact
.It dcd
Copy the timestamp when DCD is asserted.
.It !dcd
Copy the timestamp when DCD is deasserted.
.It cts
Copy the timestamp when CTS is asserted.
.It !cts
Copy the timestamp when CTS is deasserted.
.El
.Pp
If no condition is specified, the
.Xr nmea 4
line discipline will timestamp on receiving the leading
.Sq $
character of each GPRMC sentence.
.It Ar device
Specifies the name of the serial line.
.Ar device
should be a string of the form
.Dq cuaXX ,
or
.Dq /dev/cuaXX .
.El
.Pp
Only the superuser may designate NMEA devices.
.Pp
To detach the interface, kill off the
.Nm
process.
.Sh SEE ALSO
.Xr nmea 4 ,
.Xr tty 4
.Sh HISTORY
The
.Nm
command first appeared in
.Ox 4.0 .