.\" $OpenBSD: photurisd.8,v 1.10 2001/12/21 11:41:50 mpech Exp $ .\" .\" Copyright 1997 Niels Provos .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Niels Provos. .\" 4. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" Manual page, using -mandoc macros .\" .Dd July 18, 1997 .Dt PHOTURISD 8 .Os .Sh NAME .Nm photurisd .Nd IPsec key management daemon .Sh SYNOPSIS .Nm photurisd .Op Fl ci .Op Fl d Ar directory .Op Fl p Ar port .Sh DESCRIPTION The .Nm daemon establishes security associations for encrypted and/or authenticated network traffic. .Pp The daemon listens to a named pipe .Pa photuris.pipe for user requests and on a .Dv PF_ENCAP socket for kernel requests. .Pp The options are as follows: .Bl -tag -width Ds .It Fl c The .Fl c option is used to force a primality check of the bootstrapped moduli. .It Fl i The .Fl i option can be used to ignore the .Pa photuris.startup file. Otherwise the exchanges in that file will be initiated on startup. .It Fl d Ar directory The .Fl d option specifies the .Ar directory in which .Nm looks for its startup files. The default is .Pa /etc/photuris/ . .It Fl p Ar port The .Fl p option specifies the local .Ar port the daemon shall bind to. .El .Pp The file .Pa photuris.conf contains the moduli for the DH exchange and the actual exchange schemes used to establish a shared secret. The following keywords are understood: .Bl -tag -width exchange -offset indent .It Ic modulus This keyword is followed by the numeric generator and modulus. Those two values describe the group in which exchange values for the .Dq Diffie-Hellmann key exchange are generated. The modulus needs to be a .Dq safe prime . .It Ic exchange This keyword is used to specify the supported exchange schemes. The scheme is followed by either zero or the number of bits of the modulus to be used with this scheme. If zero is specified the given scheme acts as modifier to the base scheme. The base scheme is .Dq DH_G_2_MD5 (generator of two and MD5 identification). Extended schemes are .Dq DH_G_2_DES_MD5 and .Dq DH_G_2_3DES_SHA1 . An exchange can only be configured if an apropriate modulus has be given before. .It Ic config This is used to configure the LifeTimes of SPIs and exchanges. The configurable values are: .Ic exchange_max_retries , .Ic exchange_retransmit_timeout , .Ic exchange_timeout , .Ic exchange_lifetime and .Ic spi_lifetime . They are followed by an integer. .El .Pp The file .Pa attributes.conf contains the attributes, i.e., different choices of encryption and authentication, offered to the other peer. If a line starts with an ip address and a space separated netmask the following attributes are only offered to hosts lying in that net range. Only one attribute per line is allowed. An attribute can either be an already defined tag or a new definition of an attribute. In that case the line is followed by a comma-separated list: .Ar attribute name , .Ar Photuris ID , .Ar type of attribute and .Ar key length . The name is only used as reference. A list of possible Photuris IDs can be found in .Pa /usr/share/ipsec/attributes.conf . The attribute type is one of the following: .Dq enc , .Dq ident , .Dq auth or .Dq ident|auth . The key length is so far only used by the encryption attributes and specifies the number of keying bytes the daemon has to generate. Predefined attributes are: .Bl -tag -width AT_ESP_ATTRIB -offset indent .It AT_AH_ATTRIB Starts the list of authentication attributes. .It AT_ESP_ATTRIB Starts the list of encryption attributes. .El .Pp The file .Pa secrets.conf contains the party preconfigured symmetric secrets for the identity exchange. .Bl -tag -width identity_pair_local -offset indent .It Ic identity local Defines the identity the local daemon will assume and the according password. Both name and secret are braced by quotation marks and follow the .Ic identity local directive. .It Ic identity remote Defines the parties the daemon can communicate with and their secrets. Both name and secret are braced by quotation marks and follow the .Ic identity remote directive. The name and secret are the same as the identity local on the remote site. .It Ic identity pair local If the identity of the remote site is already known, .Ic identity pair local enables the daemon to assume an identity and secret based on the remote identity. The directive is followed by the remote identity, a new local identity and an according secret. In that way the secrets are not shared with all other parties. .El .Pp Once DNSSEC or other public key infrastructures are available, those will be supported also. .Pp Finally the file .Pa photuris.startup contains parameters for exchanges which are created during startup. .Pp The keywords .Ic dst , .Ic port , .Ic options , .Ic tsrc , .Ic tdst , .Ic exchange_lifetime , .Ic spi_lifetime and .Ic user are understood in the .Pa photuris.startup file. The values are as follows: .Bl -tag -width exchange_lifetime -offset indent .It Ic dst The destination IP address with which the exchange is to be established. .It Ic port The port number of the destination .Nm daemon. .It Ic options The options to be used in the exchange. Possible values are .Dq enc and .Dq auth . .It Ic exchange_lifetime Determines the lifetime of the exchange. After an exchange expires no new SPIs are created, which means the transport or tunnel is torn down as soon as the current SPI times out (see .Ic spi_lifetime below). The default value is gotten from the .Ic exchange_lifetime parameter given in .Pa photuris.conf . If it is not given there the default is 1800 seconds. .It Ic spi_lifetime Determines the lifetime of each created SPI in the exchange. .It Ic user The user name for whom the keying shall be done. Preconfigured secrets are taken from the users secret file. .El .Pp Exchanges are separated by newlines. .Sh EXAMPLES A sample .Pa photuris.startup entry: .Pp .Bd -literal dst=134.100.106.2 port=468 options=auth .Ed .Sh SEE ALSO .Xr startkey 1 , .Xr ipsec 4 , .Xr vpn 8 .Sh HISTORY The photuris keymanagement protocol is described in the internet draft .%T draft-simpson-photuris by the authors Phil Karn and William Allen Simpson. This implementation was done 1997 by Niels Provos and appeared in .Ox 2.1 .