.\"	$OpenBSD: boot_x68k.8,v 1.4 1996/07/10 03:52:56 ccappuc Exp $
.\"	$NetBSD: boot_x68k.8,v 1.1 1996/06/15 18:54:22 oki Exp $
.\"
.\" Copyright (c) 1980, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by the University of
.\"	California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	@(#)boot_x68k.8	8.2 (Berkeley) 4/19/94
.\"
.Dd Jun 16, 1996
.Dt BOOT_X68K 8 x68k
.Os
.Sh NAME
.Nm boot
.Nd
system bootstrapping procedures
.Sh DESCRIPTION
.Sy Power fail and crash recovery.
Normally, the system will reboot itself at power-up or after crashes.
An automatic consistency check of the file systems will be performed,
and unless this fails, the system will resume multi-user operations.
.Pp
.Sy Cold starts.
The X68000/X68030 system boots from the device
which is determined by the configuration of
battery-backuped SRAM.
By default, the boot rom attempt to boot from
floppy disk drive (from 0 to 3) first,
and then attempt to boot from hard disk (SASI or SCSI).
On the OpenBSD/X68k, booting from partition A of SCSI disks (sd?a) 
and 2HD floppy disks (fd?a, fd?c) is currently supported.
.Pp
First, the initial program loader of IOCS ROM or SCSI disk
(or equivalent) reads
.Pa boot
program at the top of the disk,
and then the boot program loads the OpenBSD kernel
.Pa /bsd
which is in the same partition of the disk.
If you press
.Pa [SHIFT]
key when booting, the boot program enables you to change
boot flag
.Dv RB_SINGLE
with the
.Pa [SHIFT]
key, and to choose which kernel
to be used with arrow keys.
If the LED of
.Pa [HIRAGANA]
key is turned on, the boot program adds
.Dv RB_KDB
flag and tries to boot the system in debug mode; see
.Xr ddb 8
for details.
.Pp
Note for X68030+MC68030 systems:
Nothing special to be attended to; you can boot OpenBSD just like as
other operating systems such as Human68k and OS-9.
.Pp
Note for X68030/040turbo(68040 accelerator by BEEPs) systems:
OpenBSD can boot under 040 mode.
It can also boot under 030 mode if you have MC68030 on the board.
.Pp
Note for X68000/Xellent30(68030 accelerator by TSR)+MC68030 systems:
In order to boot OpenBSD, you must choose 030 mode by using
.Pa CH30.SYS ,
which must reside in the battery-backuped SRAM.
.Pp
Note for X68000/Jupiter-X(68040/060 accelerator by FTZ-net) systems:
The system must be in 040/060 processor mode.
.Sh FILES
.Bl -tag -width /usr/mdec/xxbootxx -compact
.It Pa /bsd
system code
.It Pa /usr/mdec/xxboot
boot program, xx is disk type
.El
.Sh SEE ALSO
.Xr reboot 2 ,
.Xr disklabel 8 ,
.Xr halt 8 ,
.Xr reboot 8 ,
.Xr shutdown 8