Example NAT Rules

# Scenario: Two network interfaces; one connected to internal 192.168.0.XXX
# network, other connected externally to the Internet. Suppose the internal
# interface is named ep1 and the external interface is named xl0. The
# following mapping will provide the internal network with Internet
# connectivity for tcp/udp traffic (note the ep1 name is not used; instead
# its network address is used):
map xl0 192.168.0.0/24 -> xl0/32 portmap tcp/udp 10000:20000

# map all tcp connections from network 10 to the address of the first ppp0
# interface (which can be dynamically assigned prior to use of ipnat)
map ppp0 10.0.0.0/8 -> ppp0/32 portmap tcp/udp 10000:20000

# map all tcp connections from network 10 into addresses of network 240.1.0
map ppp0 10.0.0.0/8 -> 240.1.0.0/24 portmap tcp/udp 10000:60000

# map all tcp connections from 10.1.0.0/16 to 240.1.0.1, changing the source
# port number to something between 10,000 and 20,000 inclusive.  For all other
# IP packets, allocate an IP # between 240.1.0.0 and 240.1.0.255, temporarily
# for each new user.
#
map ed1 10.1.0.0/16 -> 240.1.0.1/32 portmap tcp 10000:20000
map ed1 10.1.0.0/16 -> 240.1.0.0/24
#
# Redirection is triggered for input packets.
# For example, to redirect FTP connections through this box, to the local ftp
# port, forcing them to connect through a proxy, you would use:
#
rdr ed0 0.0.0.0/0 port ftp -> 127.0.0.1 port ftp
#