.\" $OpenBSD: dpb.1,v 1.4 2018/07/09 11:56:32 jmc Exp $ .\" .\" Copyright (c) 2010-2013 Marc Espie .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: July 9 2018 $ .Dt DPB 1 .Os .Sh NAME .Nm dpb .Nd distributed ports builder .Sh SYNOPSIS .Nm dpb .Bk -words .Op Fl acemqrRsuUvx .Op Fl A Ar arch .Op Fl b Ar logfile .Op Fl B Ar chroot .Op Fl C Ar pathlist .Op Fl D Ar PARAM Ns = Ns Ar value .Op Fl f Ar m .Op Fl F Ar m .Op Fl h Ar hosts .Op Fl I Ar pathlist .Op Fl J Ar p .Op Fl j Ar n .Op Fl L Ar logdir .Op Fl l Ar lockdir .Op Fl M Ar threshold .Op Fl P Ar pathlist .Op Fl p Ar parallel .Op Fl S Ar logfile .Op Fl X Ar pathlist .Op Ar pathlist ... .Ek .Sh DESCRIPTION .Nm is used to build ports on a cluster of machines, or on a single machine with several cores. .Nm walks the ports tree to figure out dependencies, and starts building ports as soon as it can. .Pp .Nm will run with sensible defaults if used without options. Note, however, that it will produce logs, lock files, packages, and package installations. .Pp If run as non-root, .Nm will warn. The preferred way is to run it as root (and preferably under a chroot). .Nm will then change its identity to different users as needed. See .Sq THE SECURITY MODEL OF DPB for details. .Pp .Nm can be restricted to a subset of the tree by giving it .Ar pathlist ... to build as parameters. .Pp A .Ar pathlist is either a .Xr pkgpath 7 to build, or a filename that contains pkgpaths (one per line). .Ar pathlist parameters can also take the form .Li filename*scale in order to multiply the weights of all .Xr pkgpath 7 in a file by a given .Ar scale , or .Li pkgpath=value , in order to set the weight of a given .Xr pkgpath 7 to a specific value. .Pp .Nm supports .Sq hot-fixes : if a particular port errors out, it is possible to fix the problem, remove the corresponding lockfile, and .Nm will pick it up without needing to be stopped and restarted. .Pp In order to build on a cluster, the ports tree itself should be identical on each machine (shared through NFS or copied at start). .Pp Some directories must be shared: .Ev PACKAGE_REPOSITORY , .Ev DISTDIR , and .Ev PLIST_REPOSITORY . The .Ev WRKOBJDIR and .Ev LOCKDIR should be local to each machine, and on a high-speed partition. .Pp Also note that .Nm Ns 's logs and locks are managed by the main .Nm process, which runs locally, and hence those directories do not need to be shared on the cluster. .Pp Some log files ("rolling logs") are kept from one run to the run and stored under .Pa ${DISTDIR}/build-stats . .Pp Option .Fl h Ar file is used to specify hosts to use, where .Ar file may contain lots of information, but can be as simple as a list of hosts to use, one host per line (however, it is recommended to also include a .Ar STARTUP script). .Pp Most filenames will go through some control sequence expansions. For instance, the default logdir location can be specified as .Pa %p/logs/%a . The following sequences are recognized: .Bl -tag -offset aaaa -width %aa .It Cm %a architecture being used. .It Cm %d date at start of .Nm , GMtime, formatted as yyyy-mm-dd@hh:mm:ss. .It Cm %f fetch distfiles location (DISTDIR). .It Cm %h hostname running .Nm . .It Cm %L logdir location. .It Cm %p portsdir location. .It Cm %t timestamp (number of seconds since January 1 1970) at start of .Nm . .El .Pp Options are as follows: .Bl -tag -width pkgpathlong .It Fl A Ar arch Build packages for given architecture, selecting relevant hosts from the cluster. By default, the current host's architecture will be used. .It Fl a Walk the whole tree and builds all packages (default if no .Ar pathlist is given). .It Fl b Ar logfile Explicitly prime the heuristics module with a previous build log, so that packages that take a long time to build will happen earlier. The rolling log under .Pa %f/build-stats/%a is automatically used. .It Fl B Ar chroot chroot to .Ar chroot before building. See .Xr proot 1 for preparing such an environment. .It Fl c Clean port working directory and log before each build. .It Fl C Ar pathlist Don't clean port working directories after build. Only use simple .Xr pkgpath 7 in the list, as this does not take subpackages and flavors into account. .It Fl D Ar PARAM Ns = Ns Ar value Set defined parameter to value. Known parameters are as follows: .Bl -tag -width DISP .It Ar ALWAYS_CLEAN Set to 1 if .Nm should clean work directories even if the port errored out. .It Ar BUILD_USER Default value for .Ar build_user if you want to specify it on the command line, and want to ensure even the small "discover PORTSDIR" activity at the beginning of .Nm is not run as root. .It Ar CDROM_ONLY Don't fetch distfiles that are not allowed for cdrom. .It Ar COLOR Set to 1 to have the normal display in color. .It Ar CONTROL Let .Nm create a unix socket of the given name for external control. .It Ar CONNECTION_TIMEOUT Connection timeout for ssh. Defaults to 60 seconds. .It Ar DISPLAY_TIMEOUT Display timeout (in seconds) while waiting for jobs to finish, so that the display is updated even if jobs didn't finish. Defaults to 10 seconds. .It Ar DONT_BUILD_ONCE By default, .Nm will use the .Ev BUILD_ONCE optimization .Po see .Xr bsd.port.mk 5 .Pc if run with .Fl a : pseudo-flavors that disable subpackages and are not necessary for bootstrap will be disabled, so that the same port is built once, as far as possible. This flag disables that optimization, which might be desirable if you want to build a small subset of packages which would pull in the kitchen sink otherwise. .It Ar DONT_CLEAN_LOCKS By default, .Nm will clean old locks from dpb running on the same host that no longer exist, provided they didn't end in error. This is usually the right thing to do after a crash, or after killing dpb abruptly. Sometimes, one may want manual control over which locks to remove. .It Ar FETCH_JOBS Alternate way to specify the number of fetch jobs. .It Ar FETCH_USER User for all fetch activities if possible .Po defaults to .Ar _pfetch .Pc . .It Ar FETCH_TIMEOUT Timeout (in seconds) after which fetches that don't show any progress will be killed. .It Ar FTP_ONLY Don't fetch distfiles that are not allowed for ftp. .It Ar HISTORY_ONLY Don't fetch or build anything. Only run .Nm to figure out old distfiles and update .Pa %f/history . .It Ar LOGDIR Alternate way to specify the logging directory. .It Ar LOG_USER User for all log files if possible .Po defaults to .Ar build_user .Pc . .It Ar LOCKDIR Alternate way to specify the locking directory. .It Ar MIRROR Applicable to fetch modes. If 0, will only fetch normal .Ev DISTFILES .Po default for .Nm Fl f .Pc . If 1, will also fetch extra .Ev SUPDISTFILES .Po default for .Nm Fl F .Pc . .It Ar NO_CHECKSUM Do not run .Ar checksum again for files already fetched. .It Ar NO_CURSOR Make the terminal cursor invisible if possible. Avoids flickering on slow graphics cards. .It Ar NO_BUILD_STATS Disable reading/saving of default build stats under .Pa ${DISTDIR}/build-stats/${ARCH} . .It Ar NO_HISTORY Do not update the distfiles history. For instance, if .Nm is run a second time after a problem during the first run. .It Ar PORT_USER User that can write to the ports tree. Not really used for anything yet. .It Ar RECORD Define a file which will save all terminal output. Mostly useful for presentations, as a way to save .Nm dpb output and replay it later at a faster rate. Defaults to .Pa %L/term-report.log , can be set to nothing to disable. .It Ar STARTUP Define a start-up script on the command-line, override any host file contents. .It Ar STUCK_TIMEOUT Timeout (in seconds * speed factor) after which tasks that don't show any progress will be killed. This can be instead set on a per-core basis as the .Sq stuck property. Note that this will always be divided by the core's speed factor. .It Ar SYSLOG Make .Nm call .Xr syslog 3 on every task start/end while creating packages. This does produce lots of messages, it is intended to route the logging on another machine, while tracking down panics and other hangs. .It Ar WANTSIZE Alternate way to specify .Fl s . .El .It Fl e The listing job is extra and won't be given back to the pool when it's finished. .It Fl f Ar m Create .Ar m jobs for fetching files. Those are separate from the build jobs, since they don't consume cpu, and they run on the localhost. Defaults to 2. Can be set to 0 to bypass fetching jobs entirely, and reduce .Nm memory footprint by a lot. .It Fl F Ar m Fetch-only mode, for mirroring hosts. Do not build any package but fetch everything, disregarding .Ev BROKEN and .Ev ONLY_FOR_ARCHS information. Create .Ar m localhost jobs for fetching files. .It Fl h Ar hosts File with hosts to use for building. One host per line, plus properties, such as: .Bd -literal -offset indent espie@aeryn jobs=4 arch=i386 .Ed .Pp Lines starting with a known variable name such as .Bd -literal -offset indent STARTUP=path .Ed or .Bd -literal -offset indent FETCH_JOBS=5 .Ed can also be set inside a configuration file, to reduce the number of options you must pass on the command line. .Pp The special hostname .Ar DEFAULT can be used to preset defaults. It should be used at the start of the file. .Pp Use .Ar localhost to specify the local machine. .Nm will special-case it and not use .Xr ssh 1 to connect. .Pp Properties are as follows: .Bl -tag -width memory=150 .It arch=value Architecture of the concerned host. (there should be a startup task to check consistency, but currently this has to be set manually on heterogeneous networks.) .It always_clean=n Set to 0 or 1 on per-host basis. See .Ar ALWAYS_CLEAN parameter. .It build_user=user Use .Ar user for non root jobs if possible (defaults to .Xr whoami 1 value). .It chroot=dir Chroot to .Ar dir before building. .It jobs=n Number of jobs to run on that host, defaults to hw.ncpu. .It junk=n Junk unused packages each n steps. See .Fl J option. .It memory=thr Build everything below that wrkdir threshold with .Ev USE_MFS Ns = Ns Sq Yes , assuming the ports tree has been configured so that .Ev WRKOBJDIR_MFS points to a memory filesystem. .Ar thr is the sum, in KBytes, of ports that will be allowed to build in memory. .Nm understands suffixes, such as .Fl M Ar 2G or .Fl M Ar 500M . .Pp Note that you should always allow for some margin, as .Nm makes its decision based on the size information collected during previous builds, so in cases of significant updates, the work directory size will usually grow. .It nochecksum=0/1 Defaults to 1. During the junk stage, run .Xr pkg_delete 1 with the .Fl q (no checksum) option. .It parallel=p Run big ports on several cores. See .Fl p option. .It repair=0/1 Defaults to 1. Run .Xr pkg_add 1 with the repair option. This is useful on some bulk machines which tend to crash a lot, leaving .Pa /var/db/pkg in a weird state. .It sf=n Speed factor. An estimate of that machine's speed with that number of jobs compared to other machines in the same network. Works better with small values, in the range of 1..50. The machine (or machines) with the highest speed factor will get access to all jobs, whereas other machines will be clamped to stuff which does not take too long. Requires previous build information to be effective. Defaults to 1. .It small=s Small threshold (in seconds * sf): ports known to build under that duration are deemed to be small, so .Nm won't bother calling fine-grained steps for patch/configure/fake. It will go straight to build and package instead. Defaults to 120 seconds. .It squiggles=n Number of squiggles on this host (see .Sq the squiggle heuristics below). Defaults to 1 squiggle for hosts with 4 jobs or more, 0.7 for hosts with more than 1 job, 0 for single job hosts. .It stuck=s Stuck timeout (in seconds * sf) after which tasks which show no progress will get killed. .It timeout=s Defines a specific connection timeout for ssh to that host. .El .Pp There are no fine-grained options to control .Xr ssh 1 options, as those can be specified through virtual host declarations in .Xr ssh_config 5 . .It Fl I Ar pathlist List of .Xr pkgpath 7 to install, on the local box. This will also add them to the list of things to build. .It Fl J Ar p Override value for the .Dq junk property. Delete unneeded installed packages during the build. Each .Ar prepare stage is followed by a .Ar show-prepare-results stage. After every .Ar p new dependencies, it will be followed by a .Ar junk stage which uses .Xr pkg_delete 1 with the .Fl aXI options to delete automatically installed packages that are currently not needed. .Pp .Nm keeps track of list of dependencies on a given host, by storing each dependency list in the lockfile corresponding to the package being built. .Pp To avoid a race condition between the .Ar depends and .Ar junk stages, .Nm allows only one job on a given host to be in the .Ar depends \&... .Ar junk stages at one time, by using a per-host lock. .Pp Defaults to .Ar 150 . Can be disabled by setting to .Ar 0 . .Pp Some ports, most notably cmake-based, have an annoying dependency handling bug: they compute their makefile dependencies based on all include files present, not just the ones that are actually enabled. Those ports' build may be broken by a .Ar junk phase that removes some unused includes that were added as makefile prerequisites. Those ports should be annotated with DPB_PROPERTIES = nojunk until that bug is fixed: while a port with the .Sq nojunk property is building, .Ar junk will be postponed. .Pp Those ports will be marked with a .Sq \&! in the display, to make it more obvious why junk seems to be ineffective. .Pp Note that the .Sq nojunk property is still active for ports in error, in the belief that trivial fixes can be made that will allow the port build to finish. .It Fl j Ar n Number of jobs to run on a single host (defaults to hw.ncpu). .It Fl L Ar logdir Choose a log directory. .Po Defaults to .Pa %p/logs/%a .Pc . .It Fl l Ar lockdir Choose a lock directory. .Po Defaults to .Pa %L/locks .Pc . Override to keep local, as locks don't really like NFS. .It Fl M Ar threshold Build ports below the memory threshold under a memory filesystem, as configured through .Ev WRKOBJDIR_MFS .Po see .Xr bsd.port.mk 5 .Pc . .Ar threshold is the sum, in KBytes, of ports allowed to build there. .It Fl m Force tty-style reporting. .It Fl P Ar pathlist Read list of .Xr pkgpath 7 from file. .It Fl p Ar parallel Override value for the .Dq parallel property. .Pp Run big jobs on several cores on the same host, by using MAKE_JOBS=k . .Pp Once such a job has started, .Nm will not start new jobs on the same host until the big job has stolen enough cores from other finishing jobs. .Pp Only big ports which are safe for parallel building (annotated with DPB_PROPERTIES = parallel in their Makefile) will be affected. .Pp It is advisable to set k to an integral fraction of the number of cores available on a given host. .Ar parameter can be an integer, or of the form .Sq /n , in which case, .Nm will set k to a fraction of the total number of jobs on the machine, but never below 2. .Pp Defaults to .Sq /2 . .It Fl q Don't quit while errors/locks are around. .It Fl r Random build order. Disregard any kind of smart heuristics. Useful to try to find missing build dependencies. .It Fl R Rebuild existing packages based on discrepancies between the package signature and what the port says it should be. Concretely, use to run a partial bulk build after some library change. .Pp Note that .Fl R won't always work, as rebuilding a package when another version is already installed is not supported. Building in a chroot is strongly recommended. .It Fl S Ar logfile Read .Ar logfile as an initial workdir size log. .It Fl s Compute workdir sizes before cleaning up, and stash them in log file .Pa %L/size.log . Also maintain a rolling log of build sizes under .Pa %f/build-stats/%a-size . In order to save time, .Nm will actually not always compute new sizes for known directories, but mostly for new ones, or when the package name changes. .It Fl u Update existing packages during dependency solving. Can be used to run a bulk-build on a machine with installed packages, but might break a bit, since some packages only build on a clean machine right now. .It Fl U Insist on updating existing packages during dependency solving, even if the new package apparently didn't change. .It Fl x No tty report, only report really important things, like hosts going down and coming back up, build errors, or builds not progressing. .It Fl X Ar pathlist Read a list of .Xr pkgpath 7 from file, and pass them along in the junk phase: those are packages that should stay on the machine if they've been installed by a dependency. Can be used to avoid endlessly removing/reinstalling the most common packages, e.g., .Pa devel/gmake . .El .Pp .Nm figures out in which order to build things on the fly, and constantly displays information relative to what's currently building. There's a list of what is currently running, one line per job. Those jobs are ordered in strict chronological order, which means that long running builds will tend to percolate to the top of the list. Normal jobs look like this: .Bd -literal -offset indent www/mozilla-firefox(build) [9452] 41% unchanged for 92 seconds .Ed .Pp This contains: .Bl -dash .It an optional .Sq ~ squiggle marker (see below), .It the pkgpath being built, .It the step currently being run, .It an optional .Sq \&! for ports with the .Sq nojunk property. .It an optional .Sq + for ports built in memory. .It the pid running that task (note that this is always a pid on the host running dpb: for distributed builds, it will be an .Xr ssh 1 to another machine), .It the current size of the log file (displayed as a percentage if previous build statistics are available). .It and a possible notice that things might be stuck when the log file doesn't change for long periods. .El .Pp And fetch jobs look like this: .Bd -literal -offset indent in case of failure during clean-up). Normal list of tasks is: .Ar depends prepare fetch patch configure build fake package clean . .Pp At the end of each job, .Nm rechecks the locks directory for existing lockfiles. If some locks have vanished, it will put the corresponding paths back in the queue and attempt another build. .Pp This eases manual repairs: if a package does not build, the user can look at the log, go to the port directory, fix the problem, and then remove the lock. .Nm will pick up the ball and keep building without interruption. .Pp It is perfectly safe to run several .Nm in parallel on the same machine. This is not optimal, since each .Nm ignores the others, and only uses the lock info to avoid the other's current work, but it can be handy: in an emergency, one can start a second .Nm to obtain a specific package right now, in parallel with the original .Nm . .Pp Note that .Nm is very careful not to run two builds from the same pkgpath at the same time, even on different machines: in some cases, MULTI_PACKAGES and FLAVOR combinations may lead to the same package being built simultaneously, and since the package repository is shared, this can easily lead to trouble. .Pp Handling of shared log files and history is also done very carefully by systematically appending to files or using atomic mv operations. .Pp For obvious reasons, this won't work as well with masters running on distinct machines sharing their logs through NFS. .Ss BUILD CYCLES There are some various interdependencies in package builds that can be hard to trace in case something goes wrong. Refer to .Pa summary.log to fix those specific issues. .Sh AFFINITY .Nm now maintains a list of pkgpath-per-host that are currently building in the .Pa affinity directory of its log directory, along with building-in-memory status. .Pp That information is only wiped out when a given build finishes successfully. .Pp Otherwise .Nm will try to restart that build on the same host, which can be handy if you interrupt .Nm while it is building a large port, or if you remove a lock after fixing a problem. .Sh TAGS FOR BUILDING KDE Currently, kde3 and kde4 can't be built simultaneously. Conflicting ports have been annotated with DPB_PROPERTIES=tag:kde3 , DPB_PROPERTIES=tag:kde4 respectively. .Pp .Nm now keeps track of those tags, and will postpone ports with the wrong tag while a given host is used by the other tag. .Pp This heavily relies on the .Ar junk stage to clean-up hosts periodically, and it can even forcibly provoke a .Ar junk stage even if junk=0. .Pp This .Sq force-junk stage is actually implemented as a pseudo path called .Ar junk-proxy , which only does junk. .Pp In order for builds to proceed gracefully, machines should start in a clean slate, without kde3 or kde4 installed. .Pp As a special-case, failing ports with a kde3 or kde4 tag will not interfere with clean-up, so that hosts do not get locked down to a specific tag. This also means that their dependencies may vanish before human intervention addresses the problem. .Pp This is supposed to be a temporary hack, as kde4 is large and having official packages helps a great deal in debugging it. .Sh EXTERNAL CONTROL If .Fl D Ar CONTROL Ns = Ns Ar path if used, .Nm will create a Unix socket at the given .Pa path , only accessible by .Ar LOG_USER , that can accept a few commands, .e.g., usable as .Li nc -U path .Pp Currents commands are as follows: .Bl -tag -offset aaaa -width addhost .It Cm addhost Ar hostline Add a new host .It Cm addpath Ar fullpkgpath ... Add new fullpkgpath to scan .It Cm bye close the socket connection. .It Cm dontclean Ar pkgpath ... Add new pkgpath to list of paths that should not be cleaned after build .It Cm help Self explanatory .It Cm stats Show the current stats line .El .Sh SHUTTING DOWN GRACEFULLY .Nm periodically checks for a file named .Pa stop in its log directory. If this file exists, then it won't start new jobs, and shutdown when the current jobs are finished unless .Fl q . .Pp .Nm also checks for files named .Pa stop- in its log directory. If such a file exists, then it won't start new jobs on the corresponding machine. .Sh FILES Apart from producing packages, .Nm may create temporary files as .Pa ${FULLDISTDIR}/${DISTFILE}.part . .Pp In fetch mode .Po .Fl f and .Fl F .Pc , .Nm populates .Pa ${DISTDIR}/by_cipher/sha256 with links. It also uses .Pa ${DISTDIR}/distinfo and .Pa ${DISTDIR}/history as a .Sq permanent log : .Bl -tag -width distinfo .It distinfo cache of distfiles checksum. Contains all .Xr sha256 1 checksums of known files under .Pa ${DISTDIR} . Fetching uses this to avoid re-checksumming known files. .It history Log of old files under distinfo. After successfully scanning a full ports tree .Po .Nm Fl a .Pc , the fetch engine knows precisely which files are needed by the build (and their checksums). Anything that is .Bl -bullet .It recorded in distinfo but unneeded .It recorded in distinfo but with the wrong checksum .It not recorded in distinfo, but not needed .El will be entered at the end of history as a line: .Pp .Li ts SHA256 (file) = value .Pp with .Ar ts a timestamp from Unix epoch. .Pp When cleaning up old files, with a tool such as .Xr clean-old-distfiles 1 , it is vital to check both the checksum and the file name: since mirroring stores permanent links under .Pa by_cipher , files which are still needed will appear in history under their old checksums, as an indication the link should be removed, but possibly not the file itself. .El .Pp If .Pa ${DISTDIR} ever becomes corrupted, removing .Pa ${DISTDIR}/distinfo will force .Nm into checking all files again. .Pp All those files belong to the .Ar FETCH_USER if it is defined. They should be readable for the .Ar build_user . .Pp .Nm also records rolling build statistics under .Pa ${DISTDIR}/build-stats/${ARCH} , and uses them automatically in the absence of .Fl b Ar logfile . That file belongs to the .Ar LOG_USER if it is defined. .Pp If .Fl s is used, size information for successful builds will be recorded under .Pa ${DISTDIR}/build-stats/${ARCH}-size .Po by default, location adjustable with .Fl S Ar sizelog .Pc . This is then reused for the mfs threshold option. That file also belongs to the .Ar LOG_USER if it is defined. .Pp .Nm also maintains a list of pkgpath frequencies .Pa ${DISTDIR}/build-stats/${ARCH}-dependencies , filled at end of LISTING if .Fl a . This list will be automatically reused when restarting a build: a quick LISTING of the most important dependencies will happen before the general LISTING, in order to prime further LISTING steps with most common ports first. .Pp .Nm will also create a large number of log files under .Pa ${PORTSDIR}/logs/${ARCH} , which will belong to .Ar LOG_USER if it is defined: .Bl -tag -width engine.log .It Pa affinity/ Affinity information. One file per full pkgpath, with slash replaced by dots like so: .Pa affinity/lang.ghc,-main . .It Pa affinity.log On startup .Nm reads existing affinity information, and records it in that log, together with its pid. This log just exists to verify, along with .Pa engine.log , whether correct affinity was heeded. .It Pa awaiting-locks.log This is purely for gathering performance statistics, about how much lock contention happened around .Xr pkg_add 1 and .Xr pkg_delete 1 usage. Plotting cumulated time may help in fine-tuning squiggles parameters. .It Pa build.log Actual build log. Each line summarizes build of a single pkgpath, as: .Sq pkgpath host time logsize (detailed timing)[!] where time is the actual build time in seconds, host is the machine name where this occurred, logsize is the corresponding log file size, and a ! is appended in case the build didn't succeed. .Pp The detailed timing info gives a run-down of the build, with clean, fetch, prepare, patch (actually extract+patch), configure, build, fake, package, clean detailed timing info. Note that the actual build time starts at .Sq extract and finishes at .Sq package . .It Pa concurrent.log Shows the actual concurrency achieved as a result of job starvation / parallel handling. Only gets a new line when the value changes: pid timestamp jobs .It Pa debug.log contains various information related to the main engine spinning (RTFS, haven't figured that one yet) along with the more useful warning and die traces that happen when something wrong occurs. Especially useful for the warning messages that tend to be overwritten by subsequent displays. .It Pa dist/.log Log of the .Xr ftp 1 process(es) that attempted to fetch the distfile. .It Pa dump.log A long log file generated at the end of build that yields any information pertinent to ports still in the .Sq to build and the .Sq built queues. See also .Pa summary.log for an expurged version of same. .It Pa engine.log Build engine log. Each line corresponds to a state change for a pkgpath and starts with the pid of .Nm , plus a timestamp of the log entry. .Bl -tag -width BB: .It ^ pkgpath temporarily put aside, because a job is running in the same directory. .It ! pkgpath ignored, either directly, or indirectly because a dependency was ignored. End of the line states reason why ignored. .It A affinity mismatch: path considered for build, but not the right host, followed by the affinity information. .It B pkgpath built / distfile found. .It C forcible clean-up before building a port with a kde tag. .It E error in build or fetch. .It F distfile queued for download. .It H package still not found due to nfs on this run. .It I pkgpath can be installed. .It J job to build pkgpath started. Also records the host used for the build. .It K kde mismatch, no build until host has been cleaned up. .It L job did not start, existing lock detected. .It N job did not finish. The host may have gone down. .It P built package is no longer required for anything. .It Q pkgpath queued as buildable whenever a slot is free. .It T pkgpath to build / distfile to download. .It V pkgpath put back in the buildable queue, after job that was running in the same directory returned. .It X only happens when rescanning after an error. The engine temporarily locks paths that are incomplete (detained). These will be kept in a separate list for later examination until the end of the new scan. .It x only happens when rescanning after an error. Releases a path for building after the new scan is finished. .It Y affinity mismatch, but job will start on the wrong host anyways, as the queue contains no other buildable path. .El .Pp Please note that the engine is no longer run after each package build event because of performance considerations, so the .Sq Q and .Sq I changes may be delayed by a few .Sq B . .It Pa equiv.log Lists of equivalent pkgpaths for the build, when default flavors and default subpackages have been resolved. .It Pa fetch/bad.log List of URLs that did not lead to a correct distfile, either because they were not responding, or because of incorrect checksums. .It Pa fetch/good.log List of URLs that fetched correctly, along with timing statistics. .It Pa fetch/manually.log List of pkgpaths that require manual intervention, in human-readable form. .It Pa .sig.log Complete library signature of the host. .It Pa init..log Captured output of the initialization job for each host. .It Pa junk.log Option .Fl J counts the number of dependencies directly added to decide when to run .Nm pkg_delete Fl a . This file sums up how many ports were built, and how many ports had dependencies each time .Nm decides to junk. .It Pa locks/ Directory where locks are created. There are three types of locks: .Bl -bullet .It pkgpath locks for building, where the slash in a pkgpath is replaced with a dot like so: .Pa locks/devel.make to flatten the structure. .It distfile locks for fetching, using the distfile name without the path like so: .Pa locks/distfile.dist . .It host locks for dependency handling and junking, like so: .Pa locks/host:hostname . .El .It Pa packages/pkgname.log one file or symlink per pkgname. .It Pa paths/some/path.log one file or symlink per pkgpath. .It Pa performance.log Some parts of .Nm are computationally intensive, such as the engine runs to determine new stuff that can be built, and the actual display reports. .Pp Both those activities are rate-limited, so that .Nm doesn't run its engine at each new package build, and doesn't update its display every time there is a phase change. .Pp Lines tagged with .Sq ENG correspond to the engine; lines tagged with .Sq REP correspond to the display reports. .Pp Lines ending with a dash .Sq - correspond to new activity that didn't trigger a computation. .Pp Other lines will feature a plus .Sq + for normal runs, or an exclamation point .Sq ! for forced runs, followed by two numbers: the next timestamp at which we'll be allowed to run, and a measure of how much time it took to run this pass. .Pp That information is mostly relevant while .Nm is building lots of small packages very quickly. .It Pa signature.log Discrepancies between hosts that prevent them from starting up. .It Pa size.log Size of work directory at the end of each build, built only with .Fl s . .It Pa stats.log Simple log of the B=... line summaries. Mostly useful for making plots and tweaking performance. .It Pa stop Not a logfile at all, but a file created by the user to stop .Nm creating new jobs. .It Pa stop- Not a logfile at all, but created by the user to stop hostname creating new jobs. .It Pa summary.log A summary file generated at end of build that lists packages not built or not installable, along with a reason for it. This summarizes packages not built because of existing locks, because of errors, but also because they depend on something that was not built. .Pp In that last case, .Pa summary.log contains a chain of dependencies leading to the problematic package, or in case of build cycles, stopping at the first loop. .It Pa term-report.log Saves all terminal output, so that it can be replayed at hi speed with .Xr dpb-replay 1 . .It Pa vars.log Logs the directories that were walked in the ports tree for dependency information, including the path to a dependency that triggered this particular step. .El .Sh DIAGNOSTICS .Bl -tag -offset aaaa -width truc .It Waiting for hosts to finish STARTUP... Displayed on the console while .Nm is setting up hosts, getting essential data from the ports tree, running a .Ar STARTUP script, collecting base library signatures. .It stuck on Display on the console when .Nm detects a "frozen" port has happened outside of .Nm Ns 's purview, namely because the ports tree itself has that specific port locked without .Nm Ns 's knowledge. See .Xr bsd.port.mk 5 , .Xr portlock 1 . .It (Junk lock obtained for at