.\" $OpenBSD: an.4,v 1.25 2004/11/08 23:05:42 deraadt Exp $ .\" .\" Copyright (c) 1997, 1998, 1999 .\" Bill Paul . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Bill Paul. .\" 4. Neither the name of the author nor the names of any co-contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD: src/share/man/man4/an.4,v 1.5 2000/03/02 14:53:45 sheldonh Exp $ .\" .Dd September 10, 1999 .Dt AN 4 .Os .Sh NAME .Nm an .Nd Aironet Communications 4500/4800 IEEE 802.11B wireless network adapter .Sh SYNOPSIS .Cd "an* at pcmcia?" .Cd "an* at pci?" .Cd "an* at isapnp?" .Sh DESCRIPTION The .Nm driver provides support for the Aironet Communications 4500, 4800 (aka Cisco 340), and Cisco 350 IEEE 802.11 Direct Sequence wireless network adapters. This includes the ISA, PCI, and PCMCIA varieties. The 4500 series adapters operate at 1 and 2Mbps while the 4800 and 350 series can operate at 1, 2, 5.5, and 11Mbps. The ISA, PCI, and PCMCIA devices are all based on the same core PCMCIA modules and all have the same programming interface. However, unlike the Lucent WaveLAN/IEEE cards, the ISA and PCI cards appear to the host as normal ISA and PCI devices and do not require any PCMCIA support. .Pp ISA cards can either be configured to use ISA Plug and Play or to use a particular I/O address and IRQ by properly setting the DIP switches on the board. (The default switch setting is for plug and play.) The .Nm driver has Plug and Play support and will work in either configuration, however when using a hard-wired I/O address and IRQ, the driver configuration and the NIC's switch settings must agree. PCI cards require no switch settings of any kind and will be automatically probed and attached. .Pp All host/device interaction with the Aironet cards is via programmed I/O. The Aironet devices support 802.11 and 802.3 frames, power management, BSS (infrastructure), and IBSS (ad-hoc) operation modes. The .Nm driver encapsulates all IP and ARP traffic as 802.11 frames, however, it can receive either 802.11 or 802.3 frames. Transmit speed is selectable between 1Mbps, 2Mbps, 5.5Mbps, 11Mbps or "auto" (the NIC automatically chooses the best speed). .Pp By default, the .Nm driver configures the Aironet card for BSS operation with an SSID of "". In this mode, stations can communicate among each other without the aid of an access point. To join a service set, the driver must be set for BSS mode using the .Xr ancontrol 8 utility. .Pp For more information on configuring this device, see .Xr ifconfig 8 . .Sh DIAGNOSTICS .Bl -diag .It "an%d: init failed" The Aironet card failed to come ready after an initialization command was issued. .It "an%d: failed to allocate %d bytes on NIC" The driver was unable to allocate memory for transmit frames in the NIC's on-board RAM. .It "an%d: device timeout" The Aironet card failed to generate an interrupt to acknowledge a transmit command. .El .Sh SEE ALSO .Xr arp 4 , .Xr intro 4 , .Xr isapnp 4 , .Xr netintro 4 , .Xr pci 4 , .Xr pcmcia 4 , .Xr hostname.if 5 , .Xr ancontrol 8 , .Xr ifconfig 8 .Sh HISTORY The .Nm device driver first appeared in .Fx 4.0 . .Ox support was added in .Ox 2.7 . .Sh AUTHORS The .Nm driver was written by .An Bill Paul Aq wpaul@ee.columbia.edu and ported to .Ox by .An Michael Shalayeff Aq mickey@openbsd.org .