.\" .\" Copyright (c) 1998 Amancio Hasty and Roger Hardiman .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Amancio Hasty and .\" Roger Hardiman. .\" 4. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $OpenBSD: bktr.4,v 1.28 2013/07/16 16:05:48 schwarze Exp $ .\" $FreeBSD: /c/ncvs/src/share/man/man4/bktr.4,v 1.9.2.5 2001/03/06 19:08:09 ru Exp $ .\" .Dd $Mdocdate: July 16 2013 $ .Dt BKTR 4 .Os .Sh NAME .Nm bktr .Nd Brooktree Bt848/849/878/879 PCI TV tuners and video capture boards .Sh SYNOPSIS .Cd "bktr* at pci?" .Cd "radio* at bktr?" .Pp .Fd #include .Pp .Cd "option BKTR_ALLOC_PAGES=nnn" .Cd "option BKTR_SYSTEM_DEFAULT=XXX" .Cd "option BKTR_OVERRIDE_CARD=nnn" .Cd "option BKTR_OVERRIDE_MSP=n" .Cd "option BKTR_OVERRIDE_TUNER=nnn" .Sh DESCRIPTION The .Nm driver provides support for PCI video capture and VBI capture on low cost, high performance boards. This should support most video cards based on the Brooktree Bt848/849/878/879 Video Capture Chip. The driver also supports FM Radio if the Tuner supports it. .Pp Specifically, the following cards are known to work: .Bd -unfilled -offset indent Animation Technologies FlyVideo AOpen VA1000 Askey/Dynalink Magic TView ATI TV-Wonder and Wonder/VE AverMedia cards Hauppauge Wincast TV and WinTV/PCI IMS TV Turbo Intel Smart Video Recorder III I/O DATA GV-BCTV2/PCI I/O DATA GV-BCTV3/PCI KISS TV/FM PCI Leadtek Winfast TV 2000 Leadtek Winfast TV 2000 XP Miro PC TV MMAC Osprey NEC PK-UG-X017 STB TV PCI Television Tuner Terratec TerraTVplus Video Highway XTreme VideoLogic Captivator PCI Zoltrix TV and Genie TV/FM .Ed .Pp The driver currently supports the following features: .Bd -unfilled -offset indent PCI to PCI DMA transfer clipping yuv rgb16 rgb24 rgb32 .Ed .Pp On these cards, tuners and other components are interconnected with an I2C bus. The Brooktree848 chips act as a master device on the bus to control them. .Sh VIDEO CAPTURE INTERFACE The video capture interface to .Nm is accessed through .Pa /dev/bktrN devices. The following .Xr ioctl 2 commands are supported on the Brooktree848 video capture interface: .Bl -tag -width Ds .It Dv METEORSFMT Fa "unsigned long *" This command sets the video format, also sometimes referred to as the video norm. The supported formats are: .Pp .Bl -tag -compact -width 28n .It Dv METEOR_FMT_NTSC NTSC .It Dv METEOR_FMT_PAL PAL .It Dv METEOR_FMT_SECAM SECAM .It Dv METEOR_FMT_AUTOMODE hardware default .El .It Dv METEORGFMT Fa "unsigned long *" This command retrieves the current video format to the .Vt unsigned long * argument. .It Dv METEORSETGEO Fa "struct meteor_geomet *" This command sets the video properties that affect the bit size of a frame through the .Vt meteor_geomet * argument. .Bd -literal struct meteor_geomet { u_short rows; /* height in pixels*/ u_short columns; /* width in pixels */ u_short frames; u_long oformat; } .Ed .Pp The .Va frames field is the number of frames to buffer. Currently only 1 frame is supported for most operations. .Pp The .Va oformat field is a bit-field describing the output pixel format type and which video fields to capture. The following are supported pixel format types: .Pp .Bl -tag -compact -width 28n .It Dv METEOR_GEO_RGB16 16-bit RGB .It Dv METEOR_GEO_RGB24 24-bit RGB in 32 bits .It Dv METEOR_GEO_YUV_PACKED 16-bit 4:2:2 YUV .It Dv METEOR_GEO_YUV_PLANAR 16-bit 4:2:2 YUV .It Dv METEOR_GEO_YUV_UNSIGNED unsigned UV .It Dv METEOR_GEO_YUV_422 .It Dv METEOR_GEO_YUV_12 .It Dv METEOR_GEO_YUV_9 .El .Pp The following are supported field capture modes: .Pp .Bl -tag -compact -width 28n .It Dv METEOR_GEO_ODD_ONLY only odd fields .It Dv METEOR_GEO_EVEN_ONLY only even fields .El .Pp By default, frames will consist of both the odd and even fields. .It Dv METEORGSUPPIXFMT Fa "struct meteor_pixfmt *" This command is used iteratively to fetch descriptions of supported output pixel formats into the .Vt meteor_pixfmt * argument. .Bd -literal struct meteor_pixfmt { u_int index; METEOR_PIXTYPE type; u_int Bpp; /* bytes per pixel */ u_long masks[3]; /* YUV bit masks */ unsigned swap_bytes :1; unsigned swap_shorts:1; }; .Ed .Pp To query all the supported formats, start with an index field of 0 and continue with successive encodings (1, 2, ...) until the command returns an error. .It Dv METEORSACTPIXFMT Fa "int *" This command sets the active pixel format. The .Vt int * argument is the index of the pixel format as returned by .Dv METEORGSUPPIXFMT . .It Dv METEORGACTPIXFMT Fa "int *" This command fetches the active pixel format index into the .Vt int * argument. .It Dv METEORSINPUT Fa "unsigned long *" This command sets the input port of the Brooktree848 device. The following are supported input ports: .Pp .Bl -tag -compact -width 28n .It Dv METEOR_INPUT_DEV0 composite (RCA) .It Dv METEOR_INPUT_DEV1 tuner .It Dv METEOR_INPUT_DEV2 composite S-video .It Dv METEOR_INPUT_DEV3 mystery device .It Dv METEOR_INPUT_DEV_RGB rgb meteor .It Dv METEOR_INPUT_DEV_SVIDEO S-Video .El .Pp Not all devices built with Brooktree848 chips support the full list of input ports. .It Dv METEORGINPUT Fa "unsigned long *" This command retrieves the current input port to the .Vt unsigned long * argument. .It Dv METEORSFPS Fa "unsigned short *" This command sets the number of frames to grab each second. Valid frame rates are integers from 0 to 30. .It Dv METEORGFPS Fa "unsigned short *" This command fetches the number of frames to grab each second into the .Vt unsigned short * argument. .It Dv METEORCAPTUR Fa "int *" This command controls capturing of video data. The following are valid arguments: .Pp .Bl -tag -compact -width 28n .It Dv METEOR_CAP_SINGLE capture one frame .It Dv METEOR_CAP_CONTINOUS continuously capture .It Dv METEOR_CAP_STOP_CONT stop continuous capture .El .It Dv METEORSSIGNAL Fa "unsigned int *" This command controls the signal emission properties of .Nm . If the .Vt unsigned int * argument is a valid signal, then that signal will be emitted when either a frame or field capture has completed. To select between frame or field signalling, the following arguments are used: .Pp .Bl -tag -compact -width 28n .It Dv METEOR_SIG_FRAME signal every frame .It Dv METEOR_SIG_FIELD signal every field .El .Pp By default, signals will be generated for every frame. Generation of signals is terminated with the .Dv METEOR_SIG_MODE_MASK argument. .El .Sh TUNER INTERFACE Most cards supported by this driver feature a hardware television tuner on the I2C bus. The tuner interface to .Nm is accessed through .Pa /dev/tunerN devices. The following .Xr ioctl 2 commands are supported on the tuner interface: .Bl -tag -width Ds .It Dv TVTUNER_SETTYPE Fa "unsigned int *" This command sets the tuner's TV channel set, also sometimes called the TV channel band. This setting is used to calculate the proper tuning frequencies. The desired channel set must be selected before attempting to set the tuner channel or frequency. The following is a list of valid channel sets: .Pp .Bl -tag -compact -width 28n .It Dv CHNLSET_NABCST North America broadcast .It Dv CHNLSET_CABLEIRC North America IRC cable .It Dv CHNLSET_CABLEHRC North America HRC cable .It Dv CHNLSET_WEUROPE Western Europe .It Dv CHNLSET_JPNBCST Japan broadcast .It Dv CHNLSET_JPNCABLE Japan cable .It Dv CHNLSET_XUSSR Russia .It Dv CHNLSET_AUSTRALIA Australia .It Dv CHNLSET_FRANCE France .El .It Dv TVTUNER_GETTYPE Fa "unsigned int *" This command fetches the tuner's current channel set to the .Vt unsigned int * argument. .It Dv TVTUNER_SETCHNL Fa "unsigned int *" This command sets the tuner's frequency to a specified channel in the current channel set. .It Dv TVTUNER_GETCHNL Fa "unsigned int *" This command fetches the last selected channel. Note that it is not necessarily the current channel. In particular, changing the tuner's frequency by a command other than .Dv TVTUNER_SETCHNL will not update this setting, and it defaults to 0 on driver initialization. .It Dv TVTUNER_SETFREQ Fa "unsigned int *" This command sets the tuner's frequency to 1/16th the value of the .Vt unsigned int * argument, in MHz. Note that the current channelset is used to determine frequency offsets when this command is executed. .It Dv TVTUNER_GETFREQ Fa "unsigned int *" This command fetches the tuner's current frequency to the .Vt unsigned int * argument. Note that this value is 16 times the actual tuner frequency, in MHz. .It Dv BT848_SAUDIO Fa "int *" This command controls the audio input port and mute state. The following is a list of valid arguments: .Pp .Bl -tag -compact -width 18n .It Dv AUDIO_TUNER tuner audio port .It Dv AUDIO_EXTERN external audio port .It Dv AUDIO_INTERN internal audio port .It Dv AUDIO_MUTE mute audio .It Dv AUDIO_UNMUTE unmute audio .El .It Dv BT848_GAUDIO Fa "int *" This command fetches the audio input and mute state bits to the .Vt int * argument. .El .Sh KERNEL OPTIONS The following kernel configuration options are available: .Bl -tag -width xxxxxxxx .It Cd option BKTR_ALLOC_PAGES=nnn Specifies the number of contiguous pages to allocate when successfully probed. The default number of pages allocated by the kernel is 216. This means that there are (216*4096) bytes available for use. .It Cd option BKTR_SYSTEM_DEFAULT="(BROOKTREE_PAL | BROOKTREE_NTSC)" One of these options can be used to set the default video format for the driver. This fixed random hangs and lockups with the VideoLogic Captivator PCI card. .It Cd option BKTR_OVERRIDE_CARD=nnn Select a specific card (overrides autodetection). `nnn' is set to one of the names listed and explained below. .Pp .Bl -tag -width "CARD_ASKEY_DYNALINK_MAGIC_TVIEW" -compact .It CARD_ASKEY_DYNALINK_MAGIC_TVIEW Askey/Dynalink Magic TView .It CARD_AVER_MEDIA AverMedia .It CARD_FLYVIDEO Animation Technologies FlyVideo .It CARD_AOPEN_VA1000 AOpen VA1000 .It CARD_TVWONDER ATI TV-Wonder/VE .It CARD_HAUPPAUGE Hauppauge Wincast TV and WinTV .It CARD_IMS_TURBO IMS TV Turbo .It CARD_INTEL Intel Smart Video Recorder III .It CARD_IO_GV I/O DATA GV-BCTV2/PCI .It CARD_IO_BCTV3 I/O DATA GV-BCTV3/PCI .It CARD_KISS KISS TV/FM PCI .It CARD_LEADTEK Leadtek Winfast TV 2000 .It CARD_LEADTEK_XP Leadtek Winfast TV 2000 XP .It CARD_MIRO Miro PC TV .It CARD_OSPREY MMAC Osprey .It CARD_NEC_PK NEC PK-UG-X017 .It CARD_STB STB TV PCI Television Tuner .It CARD_TERRATVPLUS Terratec TerraTVplus .It CARD_VIDEO_HIGHWAY_XTREME Video Highway XTreme .It CARD_ZOLTRIX Zoltrix TV .It CARD_ZOLTRIX_GENIE_FM Zoltrix Genie TV/FM .El .It Cd option BKTR_OVERRIDE_MSP=n Specifies whether the MSP3400C chip is present (overrides autodetection). .It Cd option BKTR_OVERRIDE_TUNER=nnn Select a specific tuner (overrides autodetection). `nnn' is set to one of the names listed and explained below. .Pp .Bl -tag -compact -width 28n .It TEMIC_NTSC Temic 4032FY5 .It TEMIC_PAL Temic 4002FH5 .It TEMIC_SECAM Temic 4002FN5 .It PHILIPS_NTSC Philips FI1236 .It PHILIPS_PAL Philips FM1216 .It PHILIPS_SECAM Philips FI1216MF .It TEMIC_PALI Temic 4062FY5 .It PHILIPS_PALI Philips FI1246 .It PHILIPS_FR1236_NTSC Philips FR1236 MK2 .It PHILIPS_FR1216_PAL Philips FM1216 .It PHILIPS_FR1236_SECAM Philips FM1216MF .It ALPS_TSCH5 Apls TSCH5 NTSC .It ALPS_TSBH1 Apls TSBH1 NTSC .It TIVISION_TVF5533 Tivision TVF5533-MF NTSC .El .El .Sh SEE ALSO .Xr intro 4 , .Xr pci 4 , .Xr radio 4 .Sh HISTORY The .Nm driver first appeared in .Fx 2.2 . .Sh AUTHORS .An -nosplit The .Nm driver is based on the work of .An Jim Lowe Aq Mt james@miller.cs.uwm.edu , .An Mark Tinguely Aq Mt tinguely@plains.nodak.edu , .An Amancio Hasty Aq Mt hasty@star\-gate.com , .An Roger Hardiman Aq Mt roger@FreeBSD.org and a bunch of other people. .Sh CAVEATS On big-endian architectures it is not possible to program the card to perform proper byte swapping in 24 bit modes, therefore only 16 and 32 bit modes are supported.