.\" $OpenBSD: bridge.4,v 1.73 2016/06/07 20:25:48 sthen Exp $ .\" .\" Copyright (c) 1999-2001 Jason L. Wright (jason@thought.net) .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED .\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE .\" DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, .\" INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES .\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR .\" SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, .\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" .Dd $Mdocdate: June 7 2016 $ .Dt BRIDGE 4 .Os .Sh NAME .Nm bridge .Nd Ethernet bridge interface .Sh SYNOPSIS .Cd "pseudo-device bridge" .Pp .In sys/types.h .In net/if.h .In netinet/in.h .In netinet/if_ether.h .In net/if_bridge.h .Sh DESCRIPTION The .Nm device creates a logical link between two or more Ethernet interfaces or encapsulation interfaces (see .Xr etherip 4 ) . This link between the interfaces selectively forwards frames from each interface on the bridge to every other interface on the bridge. A bridge can serve several services, including isolation of traffic between sets of machines so that traffic local to one set of machines is not available on the wire of another set of machines, and it can act as a transparent filter for .Xr ip 4 datagrams. .Pp A .Nm interface can be created at runtime using the .Ic ifconfig bridge Ns Ar N Ic create command or by setting up a .Xr hostname.if 5 configuration file for .Xr netstart 8 . .Pp The bridges provided by this interface are learning bridges with filtering; see .Xr pf 4 . In general a bridge works like a hub, forwarding traffic from one interface to another. It differs from a hub in that it will "learn" which machines are on each of its attached segments by actively listening to incoming traffic and examining the headers of each frame. A table is built containing the MAC address and segment to which the MAC address is attached. This allows a bridge to be more selective about what it forwards, which can be used to reduce traffic on a set of segments and also to provide an IP firewall without changing the topology of the network. .Pp The algorithm works as follows by default, but can be modified via .Xr ioctl 2 or the utility .Xr ifconfig 8 . When a frame comes in, the origin segment and the source address are recorded. If the bridge has no knowledge about where the destination is to be found, the bridge will forward the frame to all attached segments. If the destination is known to be on a different segment from its origin, the bridge will forward the packet only to the destination segment. If the destination is on the same segment as the origin segment, the bridge will drop the packet because the receiver has already had a chance to see the frame. Before forwarding a frame, the bridge will check to see if the packet contains an .Xr ip 4 or .Xr ip6 4 datagram; if so, the datagram is run through the pf interface so that it can be filtered. See the .Sx NOTES section for details. .Sh SPANNING TREE The bridge has support for 802.1D-2004 Spanning Tree Protocol (STP), which can be used to detect and remove loops in a network topology. Using the .Cm stp or .Cm -stp commands to .Nm , STP can be enabled or disabled on each port. .Pp The bridge will use the Rapid Spanning Tree Protocol (RSTP) by default to allow rapid transitions to the forwarding state. The .Cm proto command to .Nm can be used to force operation in the common Spanning Tree Protocol without rapid state transitions. Note that RSTP will be compatible with remote bridges running common STP. .Pp STP will not work on .Xr etherip 4 members because they lack a hardware MAC address. .Sh SPAN PORTS The bridge can have interfaces added to it as span ports. Span ports transmit a copy of every frame received by the bridge. This is most useful for snooping a bridged network passively on another host connected to one of the span ports of the bridge. Span ports cannot be bridge members; instead, the .Cm addspan and .Cm delspan commands are used to add and delete span ports to and from a bridge. .Sh IOCTLS A .Nm interface responds to all of the .Xr ioctl 2 calls specific to other interfaces listed in .Xr netintro 4 . The following .Xr ioctl 2 calls are specific to .Nm devices. They are defined in .In sys/sockio.h . .Bl -tag -width Ds .It Dv SIOCBRDGIFS Fa "struct ifbifconf *" Retrieve member interface list from a bridge. This request takes an .Vt ifbifconf structure (see below) as a value-result parameter. The .Va ifbic_len field should be initially set to the size of the buffer pointed to by .Va ifbic_buf . On return it will contain the length, in bytes, of the configuration list. .Pp Alternatively, if the .Va ifbic_len passed in is set to 0, .Dv SIOCBRDGIFS will set .Va ifbic_len to the size that .Va ifbic_buf needs to be to fit the entire configuration list, and will not fill in the other parameters. This is useful for determining the exact size that .Va ifbic_buf needs to be in advance. .Pp The argument structure is defined as follows: .Bd -literal struct ifbreq { char ifbr_name[IFNAMSIZ]; /* bridge ifs name */ char ifbr_ifsname[IFNAMSIZ];/* member ifs name */ u_int32_t ifbr_ifsflags; /* member ifs flags */ u_int8_t ifbr_state; /* member stp state */ u_int8_t ifbr_priority; /* member stp priority */ u_int8_t ifbr_portno; /* member port number */ u_int32_t ifbr_path_cost; /* member stp path cost */ }; /* ifbr_ifsflags flags about interfaces */ #define IFBIF_LEARNING 0x0001 /* ifs can learn */ #define IFBIF_DISCOVER 0x0002 /* sends packets w/unknown dst */ #define IFBIF_BLOCKNONIP 0x0004 /* ifs blocks non-IP/ARP in/out */ #define IFBIF_STP 0x0008 /* participate in spanning tree*/ #define IFBIF_SPAN 0x0100 /* ifs is a span port (ro) */ #define IFBIF_RO_MASK 0xff00 /* read only bits */ struct ifbifconf { char ifbic_name[IFNAMSIZ]; /* bridge ifs name */ u_int32_t ifbic_len; /* buffer size */ union { caddr_t ifbicu_buf; struct ifbreq *ifbicu_req; } ifbic_ifbicu; #define ifbic_buf ifbic_ifbicu.ifbicu_buf #define ifbic_req ifbic_ifbicu.ifbicu_req }; .Ed .It Dv SIOCBRDGADD Fa "struct ifbreq *" Add the interface named in .Va ifbr_ifsname to the bridge named in .Va ifbr_name . .It Dv SIOCBRDGDEL Fa "struct ifbreq *" Delete the interface named in .Va ifbr_ifsname from the bridge named in .Va ifbr_name . .It Dv SIOCBRDGADDS Fa "struct ifbreq *" Add the interface named in .Va ifbr_ifsname as a span port to the bridge named in .Va ifbr_name . .It Dv SIOCBRDGDELS Fa "struct ifbreq *" Delete the interface named in .Va ifbr_ifsname from the list of span ports of the bridge named in .Va ifbr_name . .It Dv SIOCBRDGSIFFLGS Fa "struct ifbreq *" Set the bridge member interface flags for the interface named in .Va ifbr_ifsname attached to the bridge .Va ifbr_name . If the flag .Dv IFBIF_LEARNING is set on an interface, source addresses from frames received on the interface are recorded in the address cache. If the flag .Dv IFBIF_DISCOVER is set, the interface will receive packets destined for unknown destinations, otherwise a frame that has a destination not found in the address cache is not forwarded to this interface. The default for newly added interfaces has both flags set. If the flag .Dv IFBIF_BLOCKNONIP is set, only .Xr ip 4 , .Xr ip6 4 , .Xr arp 4 , and Reverse ARP packets will be bridged from and to the interface. .It Dv SIOCBRDGGIFFLGS Fa "struct ifbreq *" Retrieve the bridge member interface flags for the interface named in .Va ifbr_ifsname attached to the bridge .Va ifbr_name . .It Dv SIOCBRDGRTS Fa "struct ifbaconf *" Retrieve the address cache of the bridge named in .Va ifbac_name . This request takes an .Vt ifbaconf structure (see below) as a value-result parameter. The .Va ifbac_len field should be initially set to the size of the buffer pointed to by .Va ifbac_buf . On return, it will contain the length, in bytes, of the configuration list. .Pp Alternatively, if the .Va ifbac_len passed in is set to 0, .Dv SIOCBRDGRTS will set it to the size that .Va ifbac_buf needs to be to fit the entire configuration list, and will not fill in the other parameters. As with .Dv SIOCBRDGIFS , this is useful for determining the exact size that .Va ifbac_buf needs to be in advance. .Pp The argument structure is defined as follows: .Bd -literal struct ifbareq { char ifba_name[IFNAMSIZ]; /* bridge name */ char ifba_ifsname[IFNAMSIZ];/* destination ifs */ u_int8_t ifba_age; /* address age */ u_int8_t ifba_flags; /* address flags */ struct ether_addr ifba_dst; /* destination addr */ }; #define IFBAF_TYPEMASK 0x03 /* address type mask */ #define IFBAF_DYNAMIC 0x00 /* dynamically learned */ #define IFBAF_STATIC 0x01 /* static address */ struct ifbaconf { char ifbac_name[IFNAMSIZ]; /* bridge ifs name */ u_int32_t ifbac_len; /* buffer size */ union { caddr_t ifbacu_buf; /* buffer */ struct ifbareq *ifbacu_req; /* request pointer */ } ifbac_ifbacu; #define ifbac_buf ifbac_ifbacu.ifbacu_buf #define ifbac_req ifbac_ifbacu.ifbacu_req }; .Ed .Pp Address cache entries with the type set to .Dv IFBAF_DYNAMIC in .Va ifba_flags are entries learned by the bridge. Entries with the type set to .Dv IFBAF_STATIC are manually added entries. .It Dv SIOCBRDGSADDR Fa "struct ifbareq *" Add an entry, manually, to the address cache for the bridge named in .Va ifba_name . The address and its associated interface and flags are set in the .Va ifba_dst , .Va ifba_ifsname , and .Va ifba_flags fields, respectively. .It Dv SIOCBRDGDADDR Fa "struct ifbareq *" Delete an entry from the address cache of the bridge named in .Va ifba_name . Entries are deleted strictly based on the address field .Va ifba_dst . .It Dv SIOCBRDGFLUSH Fa "struct ifbreq *" Flush addresses from the cache. .Va ifbr_name contains the name of the bridge device, and .Va ifbr_ifsflags should be set to .Dv IFBF_FLUSHALL to flush all addresses from the cache or .Dv IFBF_FLUSHDYN to flush only the dynamically learned addresses from the cache. .It Dv SIOCBRDGSCACHE Fa "struct ifbrparam *" Set the maximum address cache size for the bridge named in .Va ifbrp_name to .Va ifbrp_csize entries. .Pp The argument structure is as follows: .Bd -literal struct ifbrparam { char ifbrp_name[IFNAMSIZ]; union { u_int32_t ifbrpu_csize; /* cache size */ int ifbrpu_ctime; /* cache time */ u_int16_t ifbrpu_prio; /* bridge priority */ u_int8_t ifbrpu_hellotime; /* hello time */ u_int8_t ifbrpu_fwddelay; /* fwd delay */ u_int8_t ifbrpu_maxage; /* max age */ } ifbrp_ifbrpu; }; #define ifbrp_csize ifbrp_ifbrpu.ifbrpu_csize #define ifbrp_ctime ifbrp_ifbrpu.ifbrpu_ctime #define ifbrp_prio ifbrp_ifbrpu.ifbrpu_prio #define ifbrp_hellotime ifbrp_ifbrpu.ifbrpu_hellotime #define ifbrp_fwddelay ifbrp_ifbrpu.ifbrpu_fwddelay #define ifbrp_maxage ifbrp_ifbrpu.ifbrpu_maxage .Ed .Pp Note that the .Va ifbrp_ctime , ifbrp_hellotime , ifbrp_fwddelay and .Va ifbrp_maxage fields are in seconds. .It Dv SIOCBRDGGCACHE Fa "struct ifbrparam *" Retrieve the maximum size of the address cache for the bridge .Va ifbrp_name . .It Dv SIOCBRDGSTO Fa "struct ifbrparam *" Set the time, in seconds, for how long addresses which have not been seen on the network (i.e., have not transmitted a packet) will remain in the cache to the value .Va ifbrp_ctime . If the time is set to zero, no aging is performed on the address cache. .It Dv SIOCBRDGGTO Fa "struct ifbrparam *" Retrieve the address cache expiration time (see above). .It Dv SIOCBRDGARL Fa "struct ifbrlreq *" Add an Ethernet address filtering rule to the bridge on a specific interface. .Va ifbr_name contains the name of the bridge device, and .Va ifbr_ifsname contains the name of the bridge member interface. .Pp Rules are applied in the order in which they were added to the bridge, and the first matching rule's action parameter determines the fate of the packet. The .Va ifbr_action field is one of .Dv BRL_ACTION_PASS or .Dv BRL_ACTION_BLOCK , to pass or block matching frames, respectively. The .Va ifbr_flags field specifies whether the rule should match on input, output, or both by using the flags .Dv BRL_FLAG_IN and .Dv BRL_FLAG_OUT . At least one of these flags must be set. .Pp The .Va ifbr_flags field also specifies whether either (or both) of the source and destination addresses should be matched by using the .Dv BRL_FLAG_SRCVALID and .Dv BRL_FLAG_DSTVALID flags. The .Va ifbr_src field is the source address that triggers the rule (only considered if .Va ifbr_flags has the .Dv BRL_FLAG_SRCVALID bit set). The .Va ifbr_src field is the destination address that triggers the rule (only considered if .Va ifbr_flags has the .Dv BRL_FLAG_DSTVALID bit set). If neither bit is set, the rule matches all frames. .Pp The argument structure is as follows: .Bd -literal struct ifbrlreq { char ifbr_name[IFNAMSIZ]; /* bridge ifs name */ char ifbr_ifsname[IFNAMSIZ]; /* member ifs name */ u_int8_t ifbr_action; /* disposition */ u_int8_t ifbr_flags; /* flags */ struct ether_addr ifbr_src; /* source mac */ struct ether_addr ifbr_dst; /* destination mac */ char ifbr_tagname[PF_TAG_NAME_SIZE]; /* pf tagname */ }; #define BRL_ACTION_BLOCK 0x01 /* block frame */ #define BRL_ACTION_PASS 0x02 /* pass frame */ #define BRL_FLAG_IN 0x08 /* input rule */ #define BRL_FLAG_OUT 0x04 /* output rule */ #define BRL_FLAG_SRCVALID 0x02 /* src valid */ #define BRL_FLAG_DSTVALID 0x01 /* dst valid */ .Ed .It Dv SIOCBRDGFRL Fa "struct ifbrlreq *" Remove all filtering rules from a bridge interface member. .Va ifbr_name contains the name of the bridge device, and .Va ifbr_ifsname contains the name of the bridge member interface. .It Dv SIOCBRDGGRL Fa "struct ifbrlconf *" Retrieve all of the rules from the bridge, .Va ifbrl_name , for the member interface, .Va ifbrl_ifsname . This request takes an .Vt ifbrlconf structure (see below) as a value-result parameter. The .Va ifbrl_len field should be initially set to the size of the buffer pointed to by .Va ifbrl_buf . On return, it will contain the length, in bytes, of the configuration list. .Pp Alternatively, if the .Va ifbrl_len passed in is set to 0, .Dv SIOCBRDGGRL will set it to the size that .Va ifbrl_buf needs to be to fit the entire configuration list, and will not fill in the other parameters. As with .Dv SIOCBRDGIFS , this is useful for determining the exact size that .Va ifbrl_buf needs to be in advance. .Pp The argument structure is defined as follows: .Bd -literal struct ifbrlconf { char ifbrl_name[IFNAMSIZ]; /* bridge ifs name */ char ifbrl_ifsname[IFNAMSIZ]; /* member ifs name */ u_int32_t ifbrl_len; /* buffer size */ union { caddr_t ifbrlu_buf; struct ifbrlreq *ifbrlu_req; } ifbrl_ifbrlu; #define ifbrl_buf ifbrl_ifbrlu.ifbrlu_buf #define ifbrl_req ifbrl_ifbrlu.ifbrlu_req }; .Ed .\" .It Dv SIOCBRDGGSIFS Fa "struct ifbreq *" .It Dv SIOCBRDGGPRI Fa "struct ifbrparam *" Retrieve the Spanning Tree Protocol (STP) priority parameter of the bridge into the .Va ifbrp_prio field. .It Dv SIOCBRDGSPRI Fa "struct ifbrparam *" Set the STP priority parameter of the bridge to the value in .Va ifbrp_prio . .It Dv SIOCBRDGGHT Fa "struct ifbrparam *" Retrieve the STP hello time parameter, in seconds, of the bridge into the .Va ifbrp_hellotime field. .It Dv SIOCBRDGSHT Fa "struct ifbrparam *" Set the STP hello time parameter, in seconds, of the bridge to the value in .Va ifbrp_hellotime . The value in .Va ifbrp_hellotime cannot be zero. .It Dv SIOCBRDGGFD Fa "struct ifbrparam *" Retrieve the STP forward delay parameter, in seconds, of the bridge into the .Va ifbrp_fwddelay field. .It Dv SIOCBRDGSFD Fa "struct ifbrparam *" Set the STP forward delay parameter, in seconds, of the bridge to the value in .Va ifbrp_fwddelay . The value in .Va ifbrp_fwddelay cannot be zero. .It Dv SIOCBRDGGMA Fa "struct ifbrparam *" Retrieve the STP maximum age parameter, in seconds, of the bridge into the .Va ifbrp_maxage field. .It Dv SIOCBRDGSMA Fa "struct ifbrparam *" Set the STP maximum age parameter, in seconds, of the bridge to the value in .Va ifbrp_maxage . The value in .Va ifbrp_maxage cannot be zero. .It Dv SIOCBRDGSIFPRIO Fa "struct ifbreq *" Set the STP priority parameter of the interface named in .Va ifbr_ifsname to the value in .Va ifbr_priority . .It Dv SIOCBRDGSIFCOST Fa "struct ifbreq *" Set the STP cost parameter of the interface named in .Va ifbr_ifsname to the value in .Va ifbr_path_cost . The value in .Va ifbr_path_cost must be greater than or equal to one. .El .Sh ERRORS If the .Xr ioctl 2 call fails, .Xr errno 2 is set to one of the following values: .Bl -tag -width Er .It Bq Er ENOENT For an add request, this means that the named interface is not configured into the system. For a delete operation, it means that the named interface is not a member of the bridge. For an address cache deletion, the address was not found in the table. .It Bq Er ENOMEM Memory could not be allocated for an interface or cache entry to be added to the bridge. .It Bq Er EEXIST The named interface is already a member of the bridge. .It Bq Er EBUSY The named interface is already a member of another bridge. .It Bq Er EINVAL The named interface is not an Ethernet interface, or an invalid ioctl was performed on the bridge. .It Bq Er ENETDOWN Address cache operation (flush, add, or delete) on a bridge that is in the down state. .It Bq Er EPERM Super-user privilege is required to add and delete interfaces to and from bridges and to set the bridge interface flags. .It Bq Er EFAULT The buffer used in a .Dv SIOCBRDGIFS or .Dv SIOCBRDGRTS request points outside of the process's allocated address space. .It Bq Er ESRCH No such member interface in the bridge. .El .Sh NOTES Bridged packets pass through .Xr pf 4 filters once as input on the receiving interface and once as output on all interfaces on which they are forwarded. In order to pass through the bridge packets must pass any .Ar in rules on the input and any .Ar out rules on the output interface. Packets may be blocked either entering or leaving the bridge. .Pp Return packets generated by pf itself are not routed using the kernel routing table. Instead, pf will send these replies back to the same Ethernet address that the original packet came from. This applies to rules with .Ic return , .Ic return-rst , .Ic return-icmp , .Ic return-icmp6 , or .Ic synproxy defined. At the moment, only .Ic return-rst on IPv4 is implemented and the other packet generating rules are unsupported. .Pp If an IP packet is too large for the outgoing interface, the bridge will perform IP fragmentation. This can happen when bridge members have different MTUs or when IP fragments are reassembled by pf. Non-IP packets which are too large for the outgoing interface will be dropped. .Pp If the .Dv IFF_LINK2 flag is set on the .Nm interface, the bridge will also perform transparent .Xr ipsec 4 processing on the packets (encrypt or decrypt them), according to the policies set with the .Xr ipsecctl 8 command by the administrator. If appropriate security associations (SAs) do not exist, any key management daemons such as .Xr isakmpd 8 that are running on the bridge will be invoked to establish the necessary SAs. These daemons have to be configured as if they were running on the host whose traffic they are protecting (i.e., they need to have the appropriate authentication and authorization material, such as keys and certificates, to impersonate the protected host(s)). .Sh SEE ALSO .Xr errno 2 , .Xr ioctl 2 , .Xr arp 4 , .Xr etherip 4 , .Xr ip 4 , .Xr ip6 4 , .Xr ipsec 4 , .Xr netintro 4 , .Xr pf 4 , .Xr vether 4 , .Xr hostname.if 5 , .Xr ifconfig 8 , .Xr ipsecctl 8 , .Xr isakmpd 8 , .Xr netstart 8 .Sh HISTORY The .Nm kernel interface first appeared in .Ox 2.5 . .Sh AUTHORS The .Nm kernel interface was written by .An Jason L. Wright Aq Mt jason@thought.net as part of an undergraduate independent study at the University of North Carolina at Greensboro. .Pp Support for rapid spanning tree reconfigurations (RSTP) was added by .An Andrew Thompson Aq Mt thompsa@freebsd.org and ported to .Ox by .An Reyk Floeter Aq Mt reyk@openbsd.org . .Sh BUGS There are some rather special network interface chipsets which will not work in a bridge configuration. Some chipsets have serious flaws when running in promiscuous mode, like the TI ThunderLAN (see .Xr tl 4 ) , which receives its own transmissions (this renders the address learning cache useless). Most other chipsets work fine though.