.\"	$OpenBSD: inet6.4,v 1.43 2018/01/12 04:36:44 deraadt Exp $
.\"	$KAME: inet6.4,v 1.19 2000/11/24 10:13:18 itojun Exp $
.\"
.\" Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the project nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd $Mdocdate: January 12 2018 $
.Dt INET6 4
.Os
.Sh NAME
.Nm inet6
.Nd Internet protocol version 6 family
.Sh SYNOPSIS
.In sys/types.h
.In netinet/in.h
.Sh DESCRIPTION
The Internet Protocol version 6 family
is an updated version of the Internet Protocol version 4 family.
It comprises Internet Protocol version 6
.Pq IPv6 ,
Internet Control Message Protocol version 6
.Pq ICMPv6 ,
Transmission Control Protocol
.Pq TCP ,
and User Datagram Protocol
.Pq UDP .
.Xr tcp 4
is used to support the
.Dv SOCK_STREAM
abstraction while
.Xr udp 4
is used to support the
.Dv SOCK_DGRAM
abstraction.
A raw interface to IPv6 is available by creating an Internet socket of type
.Dv SOCK_RAW .
The ICMPv6 message protocol is accessible from a raw socket.
.Pp
IPv6 addresses are 128-bit quantities,
stored in network standard byteorder.
The include file
.In netinet/in.h
defines this address
as a discriminated union.
.Pp
Sockets bound to the
.Nm
family utilize the following addressing structure:
.Bd -literal -offset indent
struct sockaddr_in6 {
	u_int8_t	sin6_len;
	sa_family_t	sin6_family;
	in_port_t	sin6_port;
	u_int32_t	sin6_flowinfo;
	struct in6_addr	sin6_addr;
	u_int32_t	sin6_scope_id;
};
.Ed
.Pp
Sockets may be created with the local address
.Dq ::
(which is equal to IPv6 address
.Dv 0:0:0:0:0:0:0:0 )
to effect
.Dq wildcard
matching on incoming messages.
.Pp
For security reasons,
.Ox
does not route IPv4 traffic to an
.Dv AF_INET6
socket,
and does not support IPv4 mapped addresses,
where IPv4 traffic is seen as if it comes from an IPv6 address like
.Dq ::ffff:10.1.1.1 .
Where both IPv4 and IPv6 traffic need to be accepted,
bind and listen on two sockets.
.Pp
Global addresses utilise the first 48 bits of the address
for the routing prefix.
The next 16 bits designate the subnet,
and the final 64 bits are used as a host identifier.
.Pp
The IPv6 specification also defines link-local addresses,
which are scoped.
A scoped address is ambiguous to the kernel
if it is specified without a scope identifier.
To manipulate scoped addresses properly from userland,
programs must use the advanced API defined in RFC 3542.
A compact description of the advanced API is available in
.Xr ip6 4 .
If scoped addresses are specified without explicit scope,
the kernel may raise an error.
.Pp
KAME supports an extended numeric IPv6 address notation
for link-local addresses,
such as
.Dq fe80::1%de0
to specify
.Dq fe80::1
on the
.Dq de0
interface.
This notation is supported by
.Xr getaddrinfo 3
and
.Xr getnameinfo 3 ,
as well as userland programs such as
.Xr telnet 1
and
.Xr ftp 1 .
.Pp
Scoped addresses are handled specially in the kernel.
In kernel structures like routing tables or interface structures,
scoped addresses have their interface index embedded into the address.
Therefore
the address on some kernel structures is not the same as that on the wire.
The embedded index will be visible on
.Dv PF_ROUTE
sockets, kernel memory access via
.Xr kvm 3 ,
and some other occasions.
HOWEVER, users should never use the embedded form.
.Sh IPv6 SETUP
Generally speaking,
IPv6 connectivity is achieved in a fashion similar to that for IPv4.
For native IPv6 setup,
routers attach to the network either manually or using
.Cm autoconf
to connect to an ISP;
hosts receive an address prefix from a router advertisement daemon such as
.Xr rtadvd 8
and use
.Cm autoconf
for stateless address configuration (SLAAC).
For setups which tunnel IPv6 over IPv4,
see
.Xr gif 4 .
.Pp
The
.Sx INET6
and
.Sx TUNNEL
sections of
.Xr ifconfig 8
contain information relevant to IPv6 setups;
settings can be made permanent using
.Xr hostname.if 5
files.
Routers need to set the
.Va net.inet6.ip6.forwarding
.Xr sysctl 2 .
.Sh SEE ALSO
.Xr socket 2 ,
.Xr icmp6 4 ,
.Xr ip6 4 ,
.Xr tcp 4 ,
.Xr udp 4 ,
.Xr hostname.if 5 ,
.Xr ifconfig 8 ,
.Xr rtadvd 8
.Sh STANDARDS
.Rs
.%A Tatsuya Jinmei
.%A Atsushi Onoe
.%D June 2000
.%N draft-ietf-ipngwg-scopedaddr-format-02.txt
.%O work in progress material
.%R internet draft
.%T "An Extension of Format for IPv6 Scoped Addresses"
.Re
.Pp
.Rs
.%A R. Gilligan
.%A S. Thomson
.%A J. Bound
.%A J. McCann
.%A W. Stevens
.%D February 2003
.%R RFC 3493
.%T Basic Socket Interface Extensions for Ipv6
.Re
.Pp
.Rs
.%A W. Stevens
.%A M. Thomas
.%A E. Nordmark
.%A T. Jinmei
.%D May 2003
.%R RFC 3542
.%T Advanced Sockets Application Programming Interface (API) for IPv6
.Re
.Sh HISTORY
The implementation described herein appeared in WIDE/KAME project.
.Sh CAVEATS
It is advisable to explicitly reject all packets to your network
not used by any of your interface prefixes.
Otherwise packets that have a destination address belonging to your network
may be routed back to your provider via the default route.
Set a reject route for your assigned prefix:
.Pp
.Dl # route add -net 2001:db8::/48 ::1 -reject