.\" $OpenBSD: iwi.4,v 1.21 2005/09/19 19:59:07 damien Exp $ .\" .\" Copyright (c) 2004 .\" Damien Bergamini . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice unmodified, this list of conditions, and the following .\" disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .Dd September 26, 2004 .Os .Dt IWI 4 .Sh NAME .Nm iwi .Nd Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11a/b/g wireless network driver .Sh SYNOPSIS .Cd "iwi* at pci?" .Sh DESCRIPTION The .Nm driver provides support for .Tn Intel PRO/Wireless 2200BG/2915ABG Mini PCI and 2225BG PCI network adapters. .Pp These are the modes the .Nm driver can operate in: .Bl -tag -width "IBSS-masterXX" .It BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .It IBSS mode Also known as .Em IEEE ad-hoc mode or .Em peer-to-peer mode. This is the standardized method of operating without an access point. Stations associate with a service set. However, actual connections between stations are peer-to-peer. .It monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. .El .Pp .Nm supports hardware WEP. Wired Equivalent Privacy (WEP) is the de facto encryption standard for wireless networks. It can be typically configured in one of three modes: no encryption; 40-bit encryption; or 104-bit encryption. Unfortunately, due to serious weaknesses in WEP protocol it is strongly recommended that it not be used as the sole mechanism to secure wireless communication. WEP is not enabled by default. .Sh CONFIGURATION The .Nm driver can be configured at runtime with .Xr ifconfig 8 or on boot with .Xr hostname.if 5 using the following parameters: .Bl -tag -width Ds .It Cm bssid Ar bssid Set the desired BSSID. .It Fl bssid Unset the desired BSSID. The interface will automatically select a BSSID in this mode, which is the default. .It Cm chan Ar n Set the channel (radio frequency) to be used by the driver based on the given channel ID .Ar n . .It Fl chan Unset the desired channel to be used by the driver. The driver will automatically select a channel in this mode, which is the default. .It Cm media Ar media The .Nm driver supports the following .Ar media types: .Pp .Bl -tag -width autoselect -compact .It Cm autoselect Enable autoselection of the media type and options. .El .It Cm mediaopt Ar opts The .Nm driver supports the following media options: .Pp .Bl -tag -width monitor -compact .It Cm ibss Select IBSS operation. .It Cm monitor Select monitor mode. .El .It Fl mediaopt Ar opts Disable the specified media options on the driver and return it to the default mode of operation (BSS). .It Cm mode Ar mode The .Nm driver supports the following modes: .Pp .Bl -tag -width 11b -compact .It Cm 11a Force 802.11a operation. .It Cm 11b Force 802.11b operation. .It Cm 11g Force 802.11g operation. .El .It Cm nwid Ar id Set the network ID. The .Ar id can either be any text string up to 32 characters in length, or a series of hexadecimal digits up to 64 digits. An empty .Ar id string allows the interface to connect to any available access points. By default the .Nm driver uses an empty string. Note that network ID is synonymous with Extended Service Set ID (ESSID). .It Cm nwkey Ar key Enable WEP encryption using the specified .Ar key . The .Ar key can either be a string, a series of hexadecimal digits (preceded by .Sq 0x ) , or a set of keys of the form .Dq n:k1,k2,k3,k4 , where .Sq n specifies which of the keys will be used for transmitted packets, and the four keys, .Dq k1 through .Dq k4 , are configured as WEP keys. If a set of keys is specified, a comma .Pq Sq \&, within the key must be escaped with a backslash. Note that if multiple keys are used, their order must be the same within the network. .Nm is capable of using both 40-bit (5 characters or 10 hexadecimal digits) or 104-bit (13 characters or 26 hexadecimal digits) keys. .It Fl nwkey Disable WEP encryption. This is the default mode of operation. .El .Sh FILES The driver needs some firmware files, which are loaded on demand when the device is attached: .Pp .Bl -tag -width Ds -offset indent -compact .It Pa /etc/firmware/iwi-license .It Pa /etc/firmware/iwi-boot .It Pa /etc/firmware/iwi-bss .It Pa /etc/firmware/iwi-ibss .It Pa /etc/firmware/iwi-monitor .It Pa /etc/firmware/iwi-ucode-bss .It Pa /etc/firmware/iwi-ucode-ibss .It Pa /etc/firmware/iwi-ucode-monitor .El .Pp These firmware files are not free because Intel refuses to grant distribution rights without contractual obligations. As a result, even though .Ox includes the driver, the firmware files cannot be included and users have to find these files on their own. The official person to state your views to about this issue is peter.engelbrecht@intel.com at (858) 391 1857. .Sh EXAMPLES The following .Xr hostname.if 5 example configures iwi0 to join whatever network is available on boot, using WEP key .Dq 0x1deadbeef1 , channel 11, obtaining an IP address using DHCP: .Bd -literal -offset indent dhcp NONE NONE NONE nwkey 0x1deadbeef1 chan 11 .Ed .Pp Configure iwi0 for WEP, using hex key .Dq 0x1deadbeef1 : .Bd -literal -offset indent # ifconfig iwi0 nwkey 0x1deadbeef1 .Ed .Pp Return iwi0 to its default settings: .Bd -literal -offset indent # ifconfig iwi0 -bssid -chan media autoselect \e nwid "" -nwkey .Ed .Pp Join an existing BSS network, .Dq my_net : .Bd -literal -offset indent # ifconfig iwi0 192.168.1.1 netmask 0xffffff00 nwid my_net .Ed .Sh DIAGNOSTICS .Bl -diag .It "iwi%d: device timeout" The driver will reset the hardware. This should not happen. .El .Sh SEE ALSO .Xr arp 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr pci 4 , .Xr hostname.if 5 , .Xr ifconfig 8 .Rs .%T The IWI Web Page .%O http://damien.bergamini.free.fr/ipw/ .Re .Sh AUTHORS The .Nm driver was written by .An Damien Bergamini Aq damien@openbsd.org .