.\"	$OpenBSD: joy.4,v 1.8 2000/07/05 13:46:52 aaron Exp $
.\"
.\" Copyright (c) 1996 Matthieu Herrb
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"      This product includes software developed by Christopher G. Demetriou.
.\" 3. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\"     $NetBSD: joy.4,v 1.2 1996/03/31 00:17:43 perry Exp $
.\"
.Dd January 7, 1996
.Dt JOY 4 i386
.Os
.Sh NAME
.Nm joy
.Nd
Games adapter driver
.Sh SYNOPSIS
.Cd "joy0 at isa? port 0x201"
.Cd "joy* at isapnp?"
.Sh DESCRIPTION
This driver provides access to the games adapter.
The lower bit in the minor device number selects the joystick: 0 is the first
joystick and 1 is the second.
.Pp
The game control adapter allows up to two joysticks to be attached to
the system.
The adapter plus the driver convert the present resistive value to a relative
joystick position.
On receipt of an output signal, four timing circuits are started.
By determining the time required for the circuit to time-out (a function of
the resistance), the paddle position can be determined.
The adapter could be used as a general purpose I/O card with four
analog (resistive) inputs plus four digital input points.
.Pp
Applications may call
.Fn ioctl
on a game adapter driver file descriptor
to set and get the offsets of the two potentiometers and the maximum
time-out value for the circuit.
The
.Fn ioctl
commands are listed in
.Aq Pa machine/joystick.h
and currently are:
.Pp
.Bl -tag -width JOY_GET_X_OFFSET -offset indent -compact
.It JOY_SETTIMEOUT
Sets the maximum time-out for the adapter.
.It JOY_GETTIMEOUT
Returns the current maximum time-out.
.It JOY_SET_X_OFFSET
Sets an offset on X value.
.It JOY_GET_X_OFFSET
Returns the current X offset.
.It JOY_SET_Y_OFFSET
Sets an offset on Y value.
.It JOY_GET_Y_OFFSET
Returns the current Y offset.
.El
.Pp
All of these commands take an integer parameter.
.Pp
Read() on the file descriptor returns a
.Fa joystick
structure:
.Bd -literal -offset indent
struct joystick {
	int x;
	int y;
	int b1;
	int b2;
};
.Ed
.Pp
The fields have the following functions:
.Pp
.Bl -tag -width xxx -offset indent -compact
.It Fa x
Joystick's current X coordinate (or position of paddle 1).
.It Fa y
Joystick's current Y coordinate (or position of paddle 2).
.It Fa b1
Current state of button 1.
.It Fa b2
Current state of button 2.
.El
.Pp
The
.Fa b1
and
.Fa b2
fields in struct joystick are set to 1 if the corresponding button is down,
or 0 otherwise.
.Pp
The X and Y coordinates are supposed to be between 0 and 255 for a
good joystick and a good adapter.
Unfortunately, because of the hardware hack that is used to measure the
position (by measuring the time needed to discharge an RC circuit made from
the joystick's potentiometer and a capacitor on the adapter), calibration
is needed to determine exactly what values are returned for a specific
joystick/adapter combination.
Incorrect hardware can yield negative or > 255 values.
.Pp
A typical calibration procedure uses the values returned at lower-left,
center, and upper-right positions of the joystick to compute the relative
position.
.Pp
This calibration is not part of the driver.
.Sh FILES
.Bl -tag -width /dev/joy0 -compact
.It Pa /dev/joy0
first joystick
.It Pa /dev/joy1
second joystick
.El
.Sh AUTHORS
Jean-Marc Zucconi wrote the
.Fx
driver.
Matthieu Herrb ported it to
.Nx
and wrote this manual page.