.\"	$OpenBSD: magma.4,v 1.4 2001/01/29 02:11:11 niklas Exp $
.\"
.\"
.\" Copyright (c) 1998 Iain Hibbert
.\" All rights reserved.
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by Iain Hibbert
.\" 4. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd April 21, 1998
.Dt MAGMA 4 sparc
.Os
.Sh NAME
.Nm magma
.Nd
Magma Sp Serial/Parallel board device driver
.Sh SYNOPSIS
.Cd "magma? at sbus? slot ? offset ?"
.Cd "mtty? at magma?"
.Cd "mbpp? at magma?"
.Sh DESCRIPTION
This driver provides an interface to Magma LC2+1Sp, 2+1Sp, 4+1Sp, 8+2Sp,
4Sp, 8Sp, 12Sp, 16Sp, 1P and 2P boards.  These boards are based around
the Cirrus Logic CD1400 serial/parallel communications engine and the
Cirrus Logic CD1190 parallel communications engine.
.Pp
The device minor numbers for this driver are encoded as follows:
.Pp
.Bd -literal
    +---+---+---+---+---+---+---+---+
    | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
    +---+---+---+---+---+---+---+---+
      |   |   |   |   |   |   |   |
      |   |   |   |   +---+---+---+---> port number
      |   |   |   |
      |   |   |   +-------------------> dialout (on tty ports)
      |   |   |
      |   |   +-----------------------> unused
      |   |
      +---+---------------------------> card number
.Ed
.Pp
Up to four cards are supported in the system.
.Pp
All tty ports have full automatic hardware (RTS/CTS) flow control available
and a 12 byte FIFO on the chip in each direction so errors should be minimal.
.Sh DIAGNOSTICS
.Bl -diag
.It "mtty%d%x: ring buffer overflow"
Incoming characters have been discarded due to a buffer overflow.  This is
caused by the process in control of the device not reading characters
fast enough. If need be you can make the ring buffer bigger by changing the
\fIMAGMA_RBUF_SIZE\fR #define to something bigger, but it should be a multiple
of two.
.It "mtty%d%x: fifo overflow"
Incoming characters have been discarded due to a CD1400 channel overrun.  This
is caused by interrupts not being serviced sufficiently quickly to prevent
the 12 byte receive FIFO on a serial channel from overflowing.  Reducing
the value of either the \fIMTTY_RX_FIFO_THRESHOLD\fR or \fIMTTY_RX_DTR_THRESHOLD\fR
#define's to something smaller may help slow machines avoid this problem.
.El
.Sh FILES
.Bl -tag -width /dev/bpp[0-3][0-1] -compact
.It /dev/tty[0-3][0-a]
Serial ports
.It /dev/bpp[0-3][0-1]
Parallel ports
.El
.Sh SEE ALSO
.Xr read 2 ,
.Xr termios 4 ,
.Xr tty 4
.Sh AUTHORS
The driver was written by Iain Hibbert <plunky@skate.demon.co.uk>
.Sh HISTORY
The driver was loosely based upon the
.Xr cy 4
Cyclades Cyclom device driver written
by Andrew Herbert and Timo Rossi.
.Sh TODO
CD1190 parallel support
.Pp
bpp input
.Pp
Dialout (cua) devices are not yet supported.
.Pp
mdmbuf is unsupported
.Pp
automatic XON/XOFF handshaking could be implemented fairly easily.
.Pp
it would be good if the tty port waited for the FIFO to empty before allowing
a close, so that I could turn off the channel interrupts at that time. It can
be done.