.\" $OpenBSD: scf.4,v 1.2 2000/11/10 20:02:19 todd Exp $ .\" .\" Copyright (c) 1999 Jason L. Wright (jason@thought.net) .\" All rights reserved. .\" .\" This software was developed by Jason L. Wright under contract with .\" RTMX Incorporated (http://www.rtmx.com). .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Jason L. Wright for .\" RTMX Incorporated. .\" 4. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED .\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE .\" DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, .\" INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES .\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR .\" SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, .\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" .Dd July 25, 1999 .Dt SCF 4 sparc .Os .Sh NAME .Nm scf .Nd SPARC Force sysconfig driver .Sh SYNOPSIS .Cd "scf0 at mainbus0" .Sh DESCRIPTION The .Nm driver provides access to the system configuration registers on the Force CPU-5. The system configuration registers control the LED display on the front panel, the status of the rotary switch, and the flash programming control registers. .Pp By setting the .Xr sysctl 8 value .Ar machdep.led_blink to a non-zero value, the two user LEDs will blink back and forth at a rate of 1 second per point of load average. The seven segment LED will also show a numeric value for the load average (in hex), and with load averages higher than 15, the decimal point will be lit. .Sh IOCTLS The .Nm device responds to the following .Xr ioctl 2 calls defined in : .Bl -tag -width .It Dv SCFIOCSLED1 .Pq Li "u_int8_t" Set LED1 register based on the bits below. .Bd -literal -offset indent #define SCF_LED_COLOR_MASK 0x03 /* color bits */ #define SCF_LED_COLOR_OFF 0x00 /* led off */ #define SCF_LED_COLOR_GREEN 0x01 /* green led */ #define SCF_LED_COLOR_RED 0x02 /* red led */ #define SCF_LED_COLOR_YELLOW 0x03 /* yellow led */ #define SCF_LED_BLINK_MASK 0x0c /* blink bits */ #define SCF_LED_BLINK_NONE 0x00 /* steady led */ #define SCF_LED_BLINK_HALF 0x04 /* blink 1/2 hz */ #define SCF_LED_BLINK_ONE 0x08 /* blink 1 hz */ #define SCF_LED_BLINK_TWO 0x0c /* blink 2 hz */ .Ed .It Dv SCFIOCGLED1 .Pq Li "u_int8_t" Retrieve the value of the LED1 register (bits defined above). .It Dv SCFIOCSLED2 .Pq Li "u_int8_t" Set the value of the LED2 register (bits defined above). .It Dv SCFIOCGLED2 .Pq Li "u_int8_t" Retrieve the value of the LED2 register (bits defined above). .It Dv SCFIOCSLED7 .Pq Li "u_int8_t" Set the value of the 7-segment LED based on the bits below: .Bd -literal -offset indent #define SCF_7LED_A 0x01 /* Layout: */ #define SCF_7LED_B 0x02 /* AAA */ #define SCF_7LED_C 0x04 /* FF BB */ #define SCF_7LED_D 0x08 /* GGG */ #define SCF_7LED_E 0x10 /* EE CC */ #define SCF_7LED_F 0x20 /* DDD P */ #define SCF_7LED_G 0x40 #define SCF_7LED_P 0x80 .Ed .It Dv SCFIOCGROT .Pq Li "u_int8_t" Retrieve the value of the 16 position rotary switch on the front panel. .It Dv SCFIOSFMCTRL .Pq Li "u_int8_t" Set up the flash memory for writing based on the bits below: .Bd -literal -offset indent #define SCF_FMCTRL_SELROM 0x01 /* sel 1st/2nd device */ #define SCF_FMCTRL_SELBOOT 0x02 /* sel boot/user flash */ #define SCF_FMCTRL_WRITEV 0x04 /* write voltage */ #define SCF_FMCTRL_SELADDR 0x38 /* addr 21:19 bits */ .Ed .Pp The SCF_FMCTRL_SELROM bit, if clear, selects the first flash device, otherwise the second flash device is selected. The .Ar SCF_FMCTRL_SELBOOT bit, if set selects the user flash, otherwise the boot flash is selected. Setting the .Ar SCF_FMCTRL_WRITEV bit, turns on the write voltage. The .Ar SCF_FMCTRL_SELADDR bits determine which window of 512 KBytes is active for reading/writing. .El .Sh SEE ALSO .Xr ioctl 2 , .Xr sysctl 8 .Sh HISTORY .Ox support for the .Nm first appeared in .Ox 2.6 . .Sh AUTHORS The driver for the .Nm was written by Jason L. Wright under contract with RTMX Incorporated.