.\" $OpenBSD: dmf.4,v 1.3 1999/06/05 13:18:37 aaron Exp $ .\" $NetBSD: dmf.4,v 1.3 1996/03/03 17:13:23 thorpej Exp $ .\" .\" Copyright (c) 1983, 1991 Regents of the University of California. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" from: @(#)dmf.4 6.5 (Berkeley) 3/27/91 .\" .Dd March 27, 1991 .Dt DMF 4 vax .Os .Sh NAME .Nm dmf .Nd .Tn DMF-32 terminal multiplexor .Sh SYNOPSIS .Cd "device dmf0 at uba? csr 0160340 vector dmfsrint dmfsxint dmfdaint dmfdbint dmfrint dmfxint dmflint" .Sh DESCRIPTION The .Nm dmf device provides 8 lines of asynchronous serial line support. The first two of these have full modem control. The device also provides a line printer port similar to the .Tn LP-11 . Other features of the .Tn DMF-32 are not supported. During autoconfiguration, the driver examines the configuration of each .Tn DMF-32 and adjusts the interrupt vectors so that fewer vector locations are used if possible. .Pp An optional argument .Ar flags may be supplied with the device specification in the config file indicating that the line corresponding to bit number .Ar i is not properly connected, and should be treated as hard-wired with carrier always present. Thus specifying .Ql flags 0x04 for .Li dmf0 would cause line .Pa ttyA2 to be treated in this way. Flags should be set for all lines without hardware support for modem control. .Pp Normal .Tn I/O control parameters for individual lines are managed by .Xr ioctl 2 calls. Line speeds may be initiated via .Xr getty 8 and .Xr stty 1 or may be communicated by other programs which utilize .Xr ioctl such as .Xr ifcongif 8 , see .Xr tty 4 . .Pp The serial line part of the .Nm dmf driver normally enables the input silos with a short timeout (30 milliseconds); this allows multiple characters to be received per interrupt during periods of high-speed input. .Pp A line printer port on a .Nm dmf is designated by a minor device number of the form .Pf 128+ Ns Ar n . See .Xr MAKEDEV 8 . Column and lines per page may be changed from the default 132 columns and 66 lines by encoding the number of columns in bits 8-15 of flags and the number of lines in bits 16-23. This device does not provide the fancy output canonicalization features of the .Xr lp 4 driver. .Sh FILES .Bl -tag -width "/dev/tty[A-CE-I][0-7]" -compact .It Pa /dev/tty[A-CE-I][0-7] .It Pa /dev/ttyd[0-7] .It Pa /dev/lp .El .Sh DIAGNOSTICS .Bl -diag .It dmf%d: NXM line %d. No response from .Tn UNIBUS on a DMA transfer within a timeout period. This is often followed by a .Tn UNIBUS adapter error. This occurs most frequently when the .Tn UNIBUS is heavily loaded and when devices which hog the bus (such as .Tn RK07 Ns s ) are present. It is not serious. .Pp .It dmf%d: silo overflow. The character input silo overflowed before it could be serviced. This can happen if a hard error occurs when the .Tn CPU is running with elevated priority, as the system will then print a message on the console with interrupts disabled. It is not serious. .Pp .It dmfsrint, dmfsxint, dmfdaint, dmfdbint. One of the unsupported parts of the dmf interrupted; something is amiss, check your interrupt vectors for a conflict with another device. .El .Sh SEE ALSO .Xr tty 4 .Sh HISTORY The .Nm driver appeared in .Bx 4.2 . .Sh BUGS It should be possible to set the silo timeout with a configuration file option, as the value is a trade-off between efficiency and response time for flow control and character echo.