.\" $OpenBSD: rx.4,v 1.4 1999/06/05 13:18:39 aaron Exp $ .\" $NetBSD: rx.4,v 1.3 1996/03/03 17:14:03 thorpej Exp $ .\" .\" Copyright (c) 1983, 1991 Regents of the University of California. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" from: @(#)rx.4 6.2 (Berkeley) 3/27/91 .\" .Dd March 27, 1991 .Dt RX 4 vax .Os .Sh NAME .Nm rx .Nd .Tn DEC .Tn RX02 floppy disk interface .Sh SYNOPSIS .Cd "controller fx0 at uba0 csr 0177170 vector rxintr" .Cd "disk rx0 at fx0 drive 0" .Cd "disk rx1 at fx0 drive 1" .Sh DESCRIPTION The .Nm rx device provides access to a .Tn DEC .Tn RX02 floppy disk unit with M8256 interface module .Pf ( Tn RX211 configuration). The .Tn RX02 uses 8-inch, single-sided, soft-sectored floppy disks (with pre-formatted industry-standard headers) in either single or double density. .Pp Floppy disks handled by the .Tn RX02 contain 77 tracks, each with 26 sectors (for a total of 2,002 sectors). The sector size is 128 bytes for single density, 256 bytes for double density. Single density disks are compatible with the .Tn RX01 floppy disk unit and with .Tn IBM 3740 Series Diskette 1 systems. .Pp In addition to normal (`block' and `raw') .Tn I/O , the driver supports formatting of disks for either density and the ability to invoke a 2 for 1 interleaved sector mapping compatible with the .Tn DEC operating system .Tn RT-11 . .Pp The minor device number is interpreted as follows: .Pp .Bl -column Otherx -offset indent .Sy Bit Description 0 Sector interleaving (1 disables interleaving) 1 Logical sector 1 is on track 1 (0 no, 1 yes) 2 Not used, reserved Other Drive number .El .Pp The two drives in a single .Tn RX02 unit are treated as two disks attached to a single controller. Thus, if there are two .Tn RX02 Ns 's on a system, the drives on the first .Tn RX02 are .Dq Li rx0 and .Dq Li rx1 , while the drives on the second are .Dq Li rx2 and .Dq Li rx3 . .Pp When the device is opened, the density of the disk currently in the drive is automatically determined. If there is no floppy in the device, open will fail. .Pp The interleaving parameters are represented in raw device names by the letters .Ql a through .Ql d . Thus, unit 0, drive 0 is called by one of the following names: .Pp .Bl -column interleavedxx "Device namexx" "Starting Track" -offset indent .Sy Mapping Device name Starting track interleaved /dev/rrx0a 0 direct /dev/rrx0b 0 interleaved /dev/rrx0c 1 direct /dev/rrx0d 1 .El .Pp The mapping used on the .Ql c device is compatible with the .Tn DEC operating system .Tn RT-11 . The .Ql b device accesses the sectors of the disk in strictly sequential order. The .Ql a device is the most efficient for disk-to-disk copying. This mapping is always used by the block device. .Pp .Tn I/O requests must start on a sector boundary, involve an integral number of complete sectors, and not go off the end of the disk. .Sh NOTES Even though the storage capacity on a floppy disk is quite small, it is possible to make filesystems on double density disks. For example, the command .Bd -literal -offset indent % mkfs /dev/rx0 1001 13 1 4096 512 32 0 4 .Ed .Pp makes a file system on the double density disk in rx0 with 436 kbytes available for file storage. Using .Xr tar 1 gives a more efficient utilization of the available space for file storage. Single density diskettes do not provide sufficient storage capacity to hold file systems. .Pp A number of .Xr ioctl 2 calls apply to the rx devices, and have the form .Bd -literal -offset indent #include ioctl(fildes, code, arg) int *arg; .Ed .Pp The applicable codes are: .Bl -tag -width RXIOC_GETDENS .It Dv RXIOC_FORMAT Format the diskette. The density to use is specified by the .Ar arg argument, zero gives single density while non-zero gives double density. .It Dv RXIOC_GETDENS Return the density of the diskette (zero or non-zero as above). .It Dv RXIOC_WDDMK On the next write, include a .Em deleted data address mark in the header of the first sector. .It Dv RXIOC_RDDMK Return non-zero if the last sector read contained a .Em deleted data address mark in its header, otherwise return 0. .El .Sh FILES .Bl -tag -width /dev/rx?xx -compact .It Pa /dev/rx? .It Pa /dev/rrx?[a-d] .El .Sh DIAGNOSTICS .Bl -diag .It "rx%d: hard error, trk %d psec %d cs=%b, db=%b, err=%x, %x, %x, %x." An unrecoverable error was encountered. The track and physical sector numbers, the device registers and the extended error status are displayed. .Pp .It rx%d: state %d (reset). The driver entered a bogus state. This should not happen. .El .Sh ERRORS The following errors may be returned by the driver: .Bl -tag -width [ENODEV] .It Bq Er ENODEV Drive not ready; usually because no disk is in the drive or the drive door is open. .It Bq Er ENXIO Nonexistent drive (on open); offset is too large or not on a sector boundary or byte count is not a multiple of the sector size (on read or write); or bad (undefined) ioctl code. .It Bq Er EIO A physical error other than ``not ready'', probably bad media or unknown format. .It Bq Er EBUSY Drive has been opened for exclusive access. .It Bq Er EBADF No write access (on format), or wrong density; the latter can only happen if the disk is changed without .Em closing the device (i.e., calling .Xr close 2 ) . .El .Sh SEE ALSO .Xr tar 1 , .Xr arff 8 , .Xr mkfs 8 , .Xr newfs 8 , .Xr rxformat 8 .Sh HISTORY The .Nm driver appeared in .Bx 4.2 . .Sh BUGS A floppy may not be formatted if the header info on sector 1, track 0 has been damaged. Hence, it is not possible to format completely degaussed disks or disks with other formats than the two known by the hardware. .Pp If the drive subsystem is powered down when the machine is booted, the controller won't interrupt.