.\" $OpenBSD: netintro.4,v 1.37 2007/06/11 08:42:01 jmc Exp $ .\" $NetBSD: netintro.4,v 1.4 1995/10/19 08:03:40 jtc Exp $ .\" .\" Copyright (c) 1983, 1990, 1991, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)netintro.4 8.2 (Berkeley) 11/30/93 .\" .Dd $Mdocdate: June 11 2007 $ .Dt NETINTRO 4 .Os .Sh NAME .Nm netintro .Nd introduction to networking facilities .Sh SYNOPSIS .Fd #include .Fd #include .Fd #include .Sh DESCRIPTION This section is a general introduction to the networking facilities available in the system. Documentation in this part of section 4 is broken up into three areas: .Em protocol families (domains), .Em protocols , and .Em network interfaces . .Pp All network protocols are associated with a specific .Em protocol family . A protocol family provides basic services to the protocol implementation to allow it to function within a specific network environment. These services may include packet fragmentation and reassembly, routing, addressing, and basic transport. A protocol family may support multiple methods of addressing, though the current protocol implementations do not. A protocol family is normally comprised of a number of protocols, one per .Xr socket 2 type. It is not required that a protocol family support all socket types. A protocol family may contain multiple protocols supporting the same socket abstraction. .Pp A protocol supports one of the socket abstractions detailed in .Xr socket 2 . A specific protocol may be accessed either by creating a socket of the appropriate type and protocol family, or by requesting the protocol explicitly when creating a socket. Protocols normally accept only one type of address format, usually determined by the addressing structure inherent in the design of the protocol family/network architecture. Certain semantics of the basic socket abstractions are protocol specific. All protocols are expected to support the basic model for their particular socket type, but may, in addition, provide non-standard facilities or extensions to a mechanism. For example, a protocol supporting the .Dv SOCK_STREAM abstraction may allow more than one byte of out-of-band data to be transmitted per out-of-band message. .Pp A network interface is similar to a device interface. Network interfaces comprise the lowest layer of the networking subsystem, interacting with the actual transport hardware. An interface may support one or more protocol families and/or address formats. The .Sx SYNOPSIS section of each network interface entry gives a sample specification of the related drivers for use in providing a system description to the .Xr config 8 program. The .Sx DIAGNOSTICS section lists messages which may appear on the console and/or in the system error log, .Pa /var/log/messages (see .Xr syslogd 8 ) , due to errors in device operation. .Pp Network interfaces may be collected together into interface groups. An interface group is a container that can be used generically when referring to any interface related by some criteria. When an action is performed on an interface group, such as packet filtering by the .Xr pf 4 subsystem, the operation will be applied to each member interface in the group, if supported by the subsystem. The .Xr ifconfig 8 utility can be used to view and assign membership of an interface to an interface group with the .Cm group modifier. .Sh PROTOCOLS The system currently supports the Internet protocols (IPv4 and IPv6), Appletalk, and a few others. Raw socket interfaces are provided to the .Tn IP protocol layer of the Internet. Consult the appropriate manual pages in this section for more information regarding the support for each protocol family. .Sh ADDRESSING Associated with each protocol family is an address format. All network addresses adhere to a general structure, called a .Vt sockaddr , described below. However, each protocol imposes a finer, more specific structure, generally renaming the variant, which is discussed in the protocol family manual page alluded to above. .Bd -literal -offset indent struct sockaddr { u_int8_t sa_len; /* total length */ sa_family_t sa_family; /* address family */ char sa_data[14]; /* actually longer */ }; .Ed .Pp The field .Va sa_len contains the total length of the structure, which may exceed 16 bytes. The following address values for .Va sa_family are known to the system (and additional formats are defined for possible future implementation): .Bd -literal #define AF_LOCAL 1 /* local to host (pipes, portals) */ #define AF_INET 2 /* internetwork: UDP, TCP, etc. */ #define AF_HYLINK 15 /* NSC Hyperchannel */ #define AF_APPLETALK 16 /* AppleTalk */ #define AF_INET6 24 /* IPv6 */ #define AF_NATM 27 /* native ATM access */ #define AF_BLUETOOTH 32 /* Bluetooth */ .Ed .Pp The .Va sa_data field contains the actual address value. Note that it may be longer than 14 bytes. .Sh ROUTING .Ox provides some packet routing facilities. The kernel maintains a routing information database, which is used in selecting the appropriate network interface when transmitting packets. .Pp A user process (or possibly multiple co-operating processes) maintains this database by sending messages over a special kind of socket. This supplants fixed-size .Xr ioctl 2 's used in earlier releases. .Pp This facility is described in .Xr route 4 . .Sh INTERFACES Each network interface in a system corresponds to a path through which messages may be sent and received. A network interface usually has a hardware device associated with it, though certain interfaces such as the loopback interface, .Xr lo 4 , do not. .Pp The following .Xr ioctl 2 calls may be used to manipulate network interfaces. The .Xr ioctl 2 is made on a socket (typically of type .Dv SOCK_DGRAM ) in the desired domain. Most of the requests take an .Vt ifreq structure pointer as their parameter. This structure is as follows: .Bd -literal struct ifreq { #define IFNAMSIZ 16 char ifr_name[IFNAMSIZ]; /* if name, e.g. "en0" */ union { struct sockaddr ifru_addr; struct sockaddr ifru_dstaddr; struct sockaddr ifru_broadaddr; short ifru_flags; int ifru_metric; caddr_t ifru_data; } ifr_ifru; #define ifr_addr ifr_ifru.ifru_addr /* address */ #define ifr_dstaddr ifr_ifru.ifru_dstaddr /* p-to-p peer */ #define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */ #define ifr_flags ifr_ifru.ifru_flags /* flags */ #define ifr_metric ifr_ifru.ifru_metric /* metric */ #define ifr_mtu ifr_ifru.ifru_metric /* mtu (overload) */ #define ifr_media ifr_ifru.ifru_metric /* media options */ #define ifr_data ifr_ifru.ifru_data /* used by interface */ }; .Ed .Pp The supported .Xr ioctl 2 requests are: .Bl -tag -width Ds .It Dv SIOCSIFADDR Fa "struct ifreq *" Set the interface address for a protocol family. Following the address assignment, the .Dq initialization routine for the interface is called. .Pp This call has been deprecated and superseded by the .Dv SIOCAIFADDR call, described below. .It Dv SIOCSIFDSTADDR Fa "struct ifreq *" Set the point-to-point address for a protocol family and interface. .Pp This call has been deprecated and superseded by the .Dv SIOCAIFADDR call, described below. .It Dv SIOCSIFBRDADDR Fa "struct ifreq *" Set the broadcast address for a protocol family and interface. .Pp This call has been deprecated and superseded by the .Dv SIOCAIFADDR call, described below. .It Dv SIOCGIFADDR Fa "struct ifreq *" Get the interface address for a protocol family. .It Dv SIOCGIFDSTADDR Fa "struct ifreq *" Get the point-to-point address for a protocol family and interface. .It Dv SIOCGIFBRDADDR Fa "struct ifreq *" Get the broadcast address for a protocol family and interface. .It Dv SIOCGIFDESCR Fa "struct ifreq *" Get the interface description, returned in the .Va ifru_data field. .It Dv SIOCSIFDESCR Fa "struct ifreq *" Set the interface description to the value of the .Va ifru_data field, limited to the size of .Dv IFDESCRSIZE . .It Dv SIOCSIFFLAGS Fa "struct ifreq *" Set the interface flags. If the interface is marked down, any processes currently routing packets through the interface are notified; some interfaces may be reset so that incoming packets are no longer received. When marked up again, the interface is reinitialized. .It Dv SIOCGIFFLAGS Fa "struct ifreq *" Get the interface flags. .It Dv SIOCSIFMEDIA Fa "struct ifreq *" Set the interface media settings. See .Xr ifmedia 4 for possible values. .It Dv SIOCGIFMEDIA Fa "struct ifmediareq *" Get the interface media settings. The .Vt ifmediareq structure is as follows: .Bd -literal struct ifmediareq { char ifm_name[IFNAMSIZ]; /* if name, e.g. "en0" */ int ifm_current; /* current media options */ int ifm_mask; /* don't care mask */ int ifm_status; /* media status */ int ifm_active; /* active options */ int ifm_count; /* #entries in ifm_ulist array */ int *ifm_ulist; /* media words */ }; .Ed .Pp See .Xr ifmedia 4 for interpreting this value. .It Dv SIOCSIFMETRIC Fa "struct ifreq *" Set the interface routing metric. The metric is used only by user-level routers. .It Dv SIOCGIFMETRIC Fa "struct ifreq *" Get the interface metric. .It Dv SIOCAIFADDR Fa "struct ifaliasreq *" An interface may have more than one address associated with it in some protocols. This request provides a means to add additional addresses (or modify characteristics of the primary address if the default address for the address family is specified). .Pp Rather than making separate calls to set destination or broadcast addresses, or network masks (now an integral feature of multiple protocols), a separate structure, .Vt ifaliasreq , is used to specify all three facets simultaneously (see below). One would use a slightly tailored version of this structure specific to each family (replacing each .Vt sockaddr by one of the family-specific type). One should always set the length of a .Vt sockaddr , as described in .Xr ioctl 2 . .Pp The .Vt ifaliasreq structure is as follows: .Bd -literal struct ifaliasreq { char ifra_name[IFNAMSIZ]; /* if name, e.g. "en0" */ struct sockaddr ifra_addr; struct sockaddr ifra_dstaddr; #define ifra_broadaddr ifra_dstaddr struct sockaddr ifra_mask; }; .Ed .It Dv SIOCDIFADDR Fa "struct ifreq *" This request deletes the specified address from the list associated with an interface. It also uses the .Vt ifaliasreq structure to allow for the possibility of protocols allowing multiple masks or destination addresses, and also adopts the convention that specification of the default address means to delete the first address for the interface belonging to the address family in which the original socket was opened. .It Dv SIOCGIFCONF Fa "struct ifconf *" Get the interface configuration list. This request takes an .Vt ifconf structure (see below) as a value-result parameter. The .Va ifc_len field should be initially set to the size of the buffer pointed to by .Va ifc_buf . On return it will contain the length, in bytes, of the configuration list. .Pp Alternately, if the .Va ifc_len passed in is set to 0, .Dv SIOCGIFCONF will set .Va ifc_len to the size that .Va ifc_buf needs to be to fit the entire configuration list and will not fill in the other parameters. This is useful for determining the exact size that .Va ifc_buf needs to be in advance. Note, however, that this is an extension that not all operating systems support. .Bd -literal struct ifconf { int ifc_len; /* size of associated buffer */ union { caddr_t ifcu_buf; struct ifreq *ifcu_req; } ifc_ifcu; #define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */ #define ifc_req ifc_ifcu.ifcu_req /* array of structures ret'd */ }; .Ed .It Dv SIOCIFCREATE Fa "struct ifreq *" Attempt to create the specified interface. .It Dv SIOCIFDESTROY Fa "struct ifreq *" Attempt to destroy the specified interface. .It Dv SIOCIFGCLONERS Fa "struct if_clonereq *" Get the list of clonable interfaces. This request takes an .Vt if_clonereq structure pointer (see below) as a value-result parameter. The .Va ifcr_count field should be set to the number of .Dv IFNAMSIZ Ns -sized strings that can fit in the buffer pointed to by .Va ifcr_buffer . On return, .Va ifcr_total will be set to the number of clonable interfaces, and the buffer pointed to by .Va ifcr_buffer will be filled with the names of clonable interfaces aligned on .Dv IFNAMSIZ boundaries. .Pp The .Vt if_clonereq structure is as follows: .Bd -literal struct if_clonereq { int ifcr_total; /* total cloners (out) */ int ifcr_count; /* room for this many in user buf */ char *ifcr_buffer; /* buffer for cloner names */ }; .Ed .It Dv SIOCAIFGROUP Fa "struct ifgroupreq *" Associate the interface named by .Va ifgr_name with the interface group named by .Va ifgr_group . The .Vt ifgroupreq structure is as follows: .Bd -literal struct ifg_req { char ifgrq_group[IFNAMSIZ]; }; struct ifgroupreq { char ifgr_name[IFNAMSIZ]; u_int ifgr_len; union { char ifgru_group[IFNAMSIZ]; struct ifg_req *ifgru_groups; } ifgr_ifgru; #define ifgr_group ifgr_ifgru.ifgru_group #define ifgr_groups ifgr_ifgru.ifgru_groups }; .Ed .It Dv SIOCGIFGROUP Fa "struct ifgroupreq *" Retrieve the list of groups for which an interface is a member. The interface is named by .Va ifgr_name . On enter, the amount of memory in which the group names will be written is stored in .Va ifgr_len , and the group names themselves will be written to the memory pointed to by .Va ifgr_groups . On return, the amount of memory actually written is returned in .Va ifgr_len . .Pp Alternately, if the .Va ifgr_len passed in is set to 0, .Dv SIOCGIFGROUP will set .Va ifgr_len to the size that .Va ifgr_groups needs to be to fit the entire group list and will not fill in the other parameters. This is useful for determining the exact size that .Va ifgr_groups needs to be in advance. .It Dv SIOCDIFGROUP Fa "struct ifgroupreq *" Remove the membership of the interface named by .Va ifgr_name from the group .Va ifgr_group . .El .Sh SEE ALSO .Xr netstat 1 , .Xr ioctl 2 , .Xr socket 2 , .Xr inet 3 , .Xr arp 4 , .Xr bluetooth 4 , .Xr bridge 4 , .Xr ifmedia 4 , .Xr inet 4 , .Xr intro 4 , .Xr ip 4 , .Xr ip6 4 , .Xr lo 4 , .Xr pf 4 , .Xr tcp 4 , .Xr udp 4 , .Xr hosts 5 , .Xr networks 5 , .Xr config 8 , .Xr ifconfig 8 , .Xr netstart 8 , .Xr route 8 , .Xr routed 8 .Sh HISTORY The .Nm manual appeared in .Bx 4.3 Tahoe .