.\" $OpenBSD: options.4,v 1.267 2019/11/05 07:53:58 jmc Exp $ .\" $NetBSD: options.4,v 1.21 1997/06/25 03:13:00 thorpej Exp $ .\" .\" Copyright (c) 1998 Theo de Raadt .\" Copyright (c) 1998 Todd Miller .\" Copyright (c) 1998 Gene Skonicki .\" Copyright (c) 1996 .\" Perry E. Metzger. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgment: .\" This product includes software developed for the NetBSD Project .\" by Perry E. Metzger. .\" 4. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" .Dd $Mdocdate: November 5 2019 $ .Dt OPTIONS 4 .Os .Sh NAME .Nm options .Nd kernel configuration options .Sh SYNOPSIS .Cd option ... .Sh DESCRIPTION This manual page describes a number of miscellaneous kernel configuration options that may be specified in a kernel config file. See .Xr config 8 for information on how to configure and build kernels. .Em Note : options are passed to the compile process as .Fl D flags to the C compiler. .Sh DEBUGGING OPTIONS .Bl -ohang .It Cd makeoptions DEBUG="" Do not build the debug kernel .Pa bsd.gdb . Normally, .Pa bsd.gdb is built (in addition to the regular .Pa bsd kernel) and is used for debugging kernels and their crash dumps with .Xr gdb 1 . A crash dump can be debugged by starting gdb with .Pa bsd.gdb as an argument (no core file) and then using the gdb command .Dq target kvm COREFILE . .It Cd makeoptions PROF="-pg" The .Fl pg flag causes the kernel to be compiled with support for profiling. The .Cm option GPROF is required for the kernel compile to succeed. .It Cd option ACCOUNTING Adds support for the .Xr acct 2 system call. .It Cd option DDB Compiles in a kernel debugger for diagnosing kernel problems. See .Xr ddb 4 . .It Cd option DDB_SAFE_CONSOLE Allows a break into the kernel debugger during boot. Useful when debugging problems that can cause .Xr init 8 to fail. .It Cd option DEBUG Turns on miscellaneous kernel debugging. Since options are turned into preprocessor defines (see above), .Cm option DEBUG is equivalent to doing a .Em #define DEBUG throughout the kernel. Much of the kernel has .Em #ifdef DEBUG conditional debugging code. Note that many parts of the kernel (typically device drivers) include their own .Em #ifdef XXX_DEBUG conditionals instead. .It Cd option DIAGNOSTIC Adds code to the kernel that does internal consistency checks. This code will cause the kernel to panic if corruption of internal data structures is detected. .It Cd option GPROF Adds code to the kernel for kernel profiling with .Xr kgmon 8 . .It Cd option KTRACE Adds hooks for the system call tracing facility, which allows users to watch the system call invocation behavior of processes. See .Xr ktrace 1 . .It Cd option KUBSAN Detect undefined behavior in the kernel. See .Xr kubsan 4 . .It Cd option NO_PROPOLICE Do not compile the kernel with the ProPolice stack protection. See .Xr gcc-local 1 for more information about ProPolice. .It Cd option PTRACE Adds hooks for the process tracing facility, allowing a process to control and observe another process. See .Xr ptrace 2 . .It Cd option SMALL_KERNEL Removes some features and some optimizations from the kernel to reduce the size of the resulting kernel binary. This option is used on some installation media and should not be used for general purpose kernels. .It Cd option VFSLCKDEBUG Turns on debugging for the Virtual File System interface. See .Xr vfs 9 . .It Cd option WITNESS Compiles in a lock checker for detecting lock order violations in the kernel. See .Xr witness 4 . .It Cd option WITNESS_COUNT= Ns Ar integer Maximum number of lock types that are tracked by .Xr witness 4 . It defaults to 1536. .It Cd option WITNESS_LOCKTRACE Enable .Xr witness 4 lock stack trace saving at boot. The feature is disabled by default and has to be enabled by setting the .Va kern.witness.locktrace .Xr sysctl 8 variable. .It Cd option WITNESS_WATCH Enable .Xr witness 4 at boot. By default, the subsystem is disabled and has to be enabled at runtime by raising the .Va kern.witness.watch .Xr sysctl 8 variable. .El .Sh FILE SYSTEMS .Bl -ohang .It Cd option CD9660 Includes code for the ISO 9660 + Rock Ridge file system, which is the standard file system used on many CD-ROMs. It also supports Joliet extensions. See .Xr mount_cd9660 8 . .It Cd option EXT2FS Includes code implementing the Second Extended File System .Em ( EXT2FS ) , commonly used on the Linux operating system. This option is provided here for compatibility. Some specific features of .Em EXT2FS like the "behavior on errors" are not implemented. This file system can't be used with .Li uid_t or .Li gid_t values greater than 65535. Also, the filesystem will not function correctly on architectures with differing byte-orders. That is, a big-endian machine will not be able to read an ext2fs filesystem created on an i386 or other little-endian machine. See .Xr mount_ext2fs 8 . .It Cd option FFS Includes code implementing the Berkeley Fast File System .Em ( FFS ) . Most machines need this if they are not running diskless. .It Cd option FFS2 Includes code implementing the enhanced Fast File System .Em ( FFS2 ) . .It Cd option MFS Include the memory file system .Em ( MFS ) . This file system stores files in swappable memory, and produces notable performance improvements when it is used as the file store for .Pa /tmp or similar mount points. See .Xr mount_mfs 8 . .It Cd option MSDOSFS Includes support for the MS-DOS FAT file system. The kernel also implements the Windows 95 extensions which permit the use of longer, mixed-case file names. See .Xr mount_msdos 8 and .Xr fsck_msdos 8 . .It Cd option NFSCLIENT Include the client side of the .Em NFS (Network File System) remote file sharing protocol. Although the bulk of the code implementing .Em NFS is kernel based, several user level daemons are needed for it to work. See .Xr mount_nfs 8 for details on NFS. .It Cd option NTFS Includes support for reading NTFS file systems. See .Xr mount_ntfs 8 . .It Cd option UDF Includes code for the UDF file systems typically found on DVD discs. See .Xr mount_udf 8 . .It Cd option TMPFS Includes code for the TMPFS efficient memory file system. See .Xr mount_tmpfs 8 . .El .Sh FILE SYSTEM OPTIONS .Bl -ohang .It Cd option BUFCACHEPERCENT= Ns Ar integer The maximum percentage of DMA-reachable physical memory the buffer cache may use. .It Cd option EXT2FS_SYSTEM_FLAGS This option changes the behavior of the APPEND and IMMUTABLE flags for a file on an .Em EXT2FS filesystem. Without this option, the superuser or owner of the file can set and clear them. With this option, only the superuser can set them, and they can't be cleared if the securelevel is greater than 0. See also .Xr chflags 1 . .It Cd option FFS_SOFTUPDATES Enables a scheme that uses partial ordering of buffer cache operations to allow metadata updates in FFS to happen asynchronously, increasing write performance significantly. Normally, the FFS filesystem writes metadata updates synchronously which exacts a performance penalty in favor of filesystem integrity. With soft updates, the performance of asynchronous writes is gained while retaining the safety of synchronous metadata updates. .Pp Soft updates must be enabled on a per-filesystem basis. See .Xr mount 8 . .It Cd option FIFO Adds support for .At V style FIFOs (i.e., .Dq named pipes ) . This option is recommended in almost all cases as many programs use these. .It Cd option NFSSERVER Include the server side of the .Em NFS (Network File System) remote file sharing protocol. Although the bulk of the code implementing .Em NFS is kernel based, several user level daemons are needed for it to work. See .Xr mountd 8 and .Xr nfsd 8 . .It Cd option QUOTA Enables kernel support for file system quotas. See .Xr quotaon 8 , .Xr edquota 8 , .Xr repquota 8 , and .Xr quota 1 . Note that quotas only work on .Dq ffs file systems, although .Xr rpc.rquotad 8 permits them to be accessed over .Em NFS . .It Cd option UFS_DIRHASH This option enables using an in memory hash table to speed lookups in large directories. .El .Sh MISCELLANEOUS OPTIONS .Bl -ohang .It Cd option APERTURE Provide in-kernel support for controlling VGA framebuffer mapping and PCI configuration registers by user-processes (such as an X Window System server). See .Xr xf86 4 . This option is supported on the .Va alpha , .Va amd64 , .Va i386 , .Va macppc , and .Va sparc64 architectures. .It Cd option BOOT_CONFIG Adds support for the .Fl c boot option (User Kernel Config). Allows modification of kernel settings (e.g., device parameters) before booting the system. See .Xr boot_config 8 . .It Cd option CRYPTO Enables support for the kernel cryptographic framework. See .Xr crypto 9 . While not IP specific, this option is usually used in conjunction with option .Em IPSEC . .It Cd option EISAVERBOSE Makes the boot process more verbose for EISA peripherals. See .Xr eisa 4 . .It Cd option KMEMSTATS The kernel memory allocator, .Xr malloc 9 , will keep statistics on its performance if this option is enabled. .It Cd option MULTIPROCESSOR On those architectures that have it, this enables multiprocessor support. .It Cd option PCIVERBOSE Makes the boot process more verbose for PCI peripherals (vendor names and other information is printed, etc.). See .Xr pci 4 . .It Cd option PCMCIAVERBOSE Makes the boot process more verbose for PCMCIA peripherals. See .Xr pcmcia 4 . .It Cd option USER_PCICONF Enables the user level access to the PCI bus configuration space through ioctls on the .Pa /dev/pci device. It's used by .Xr Xorg 1 and .Xr pcidump 8 . See .Xr pci 4 . .It Cd option UVM_SWAP_ENCRYPT Enables kernel support for encrypting pages that are written out to swap storage. Swap encryption prevents sensitive data from remaining on the disk even after the operating system has been shut down. This option should be turned on if cryptographic filesystems are used. The sysctl variable .Em vm.swapencrypt.enable controls its behaviour. See .Xr sysctl 8 and .Xr sysctl 2 . .El .Sh NETWORKING OPTIONS .Bl -ohang .It Cd option ENCDEBUG This option permits the conditional logging of IPsec debugging information, and requires the .Em IPSEC option. Debug logging can be turned on/off through the use of the .Em net.inet.ip.encdebug sysctl variable. If .Em net.inet.ip.encdebug is 1, debug logging is on. See .Xr sysctl 8 and .Xr sysctl 2 . .It Cd option INET6 Includes support for the IPv6 protocol stack. See .Xr inet6 4 . .Em INET6 enables multicast routing code as well. .It Cd option IPSEC This option enables IP security protocol support. See .Xr ipsec 4 for more details. .It Cd option MROUTING Includes support for IP multicast routers. Multicast routing is controlled by the .Xr mrouted 8 daemon. .It Cd option ND6_DEBUG The option sets the default value of .Em net.inet6.icmp6.nd6_debug to 1, for debugging IPv6 neighbor discovery protocol handling. See .Xr sysctl 2 . .It Cd option PIPEX Includes pipex in-kernel acceleration for PPPoE, L2TP or PPTP. See .Xr pipex 4 . .It Cd option PPP_BSDCOMP Enables BSD compressor for PPP connections. .It Cd option PPP_DEFLATE For use in conjunction with PPP_BSDCOMP; provides an interface to zlib for PPP for deflate compression/decompression. .It Cd option PPPOE_TERM_UNKNOWN_SESSIONS Send PADT to terminate open sessions before connecting. See .Xr pppoe 4 . .It Cd option SOCKET_SPLICE Enables zero-copy socket splicing in the kernel. See .Dv SO_SPLICE in .Xr setsockopt 2 and .Xr sosplice 9 . .It Cd option TCP_ECN Turns on Explicit Congestion Notification (RFC 3168). .Em ECN allows intermediate routers to use the Congestion Experienced codepoint in the IP header as an indication of congestion, and allows TCP to adjust the transmission rate using this signal. Both communication endpoints negotiate enabling .Em ECN functionality at the TCP connection establishment. .It Cd option TCP_SIGNATURE Turns on support for the TCP MD5 Signature option (RFC 2385). This is used by Internet backbone routers to provide per-packet authentication for the TCP packets used to communicate BGP routing information. You will also need a routing daemon that supports this option in order to actually use it. .El .Sh OPERATION RELATED OPTIONS .Bl -ohang -compact .It Cd option BUFPAGES= Ns Ar value This option sets the number of pages available for the buffer cache. The default value is machine dependent, often calculated as between 5% and 10% of total available RAM. .Pp .It Cd option NKMEMPAGES= Ns Ar value .It Cd option NKMEMPAGES_MAX= Ns Ar value Size of kernel malloc area in PAGE_SIZE-sized logical pages. This area is covered by the kernel submap .Em kmem_map . The kernel attempts to auto-size this map based on the amount of physical memory in the system. Platform-specific code may place bounds on this computed size, which may be viewed with the .Xr sysctl 8 variable .Em vm.nkmempages . See .Pa /usr/include/machine/param.h for the default upper bound. The related option .Sq NKMEMPAGES_MAX allows the bounds to be overridden in the kernel configuration file in the event the computed value is insufficient resulting in an .Dq out of space in kmem_map panic. .El .Sh SCSI SUBSYSTEM OPTIONS See .Xr scsi 4 . .Bl -ohang .It Cd option SCSI_DELAY= Ns Ar value Delay for .Ar value seconds before starting to probe the first SCSI bus. This can be used if a SCSI device needs extra time to get ready. .It Cd option SCSIDEBUG Enable printing of SCSI subsystem debugging info to the console. Each of .Em SCSIDEBUG_LEVEL , .Em SCSIDEBUG_BUSES , .Em SCSIDEBUG_TARGETS and .Em SCSIDEBUG_LUNS must have non-zero values for any debugging info to be printed. Only .Em SCSIDEBUG_LEVEL has a default value (SDEV_DB1 | SDEV_DB2) that is non-zero. .It Cd option SCSIDEBUG_BUSES= Ns Ar value Define which SCSI buses will print debug info. Each bit enables debugging info for the corresponding bus. e.g. a value of 0x1 enables debug info for bus 0. .It Cd option SCSIDEBUG_LEVEL= Ns Ar value Define which of the four levels of debugging info are printed. Each bit enables a level, and multiple levels are specified by setting multiple bits. .Bd -literal -offset indent 0x0010 (SDEV_DB1) SCSI commands, errors, and data 0x0020 (SDEV_DB2) routine flow 0x0040 (SDEV_DB3) routine internals 0x0080 (SDEV_DB4) miscellaneous addition debugging .Ed .Pp If .Em SCSIDEBUG_LEVEL is undefined, a value of 0x0030 (SDEV_DB1|SDEV_DB2) is used. .It Cd option SCSIDEBUG_LUNS= Ns Ar value Define which SCSI luns will print debug info. Each bit enables debugging info for the corresponding lun. .It Cd option SCSIDEBUG_TARGETS= Ns Ar value Define which SCSI targets will print debug info. Each bit enables debugging info for the corresponding target. .It Cd option SCSITERSE Terser SCSI error messages. This omits the table for decoding ASC/ASCQ info, saving about 30KB. .El .Sh SYSTEM V IPC OPTIONS .Bl -ohang .It Cd option SEMMNI= Ns Ar value Number of semaphore identifiers (also called semaphore handles and semaphore sets) available in the system. Default value is 10. The kernel allocates memory for the control structures at startup, so arbitrarily large values should be avoided. .It Cd option SEMMNS= Ns Ar value Maximum number of semaphores in all sets in the system. Default value is 60. .It Cd option SEMMNU= Ns Ar value Maximum number of semaphore undo structures in the system. Default value is 30. .It Cd option SEMUME= Ns Ar value Maximum number of per-process undo operation entries in the system. Semaphore undo operations are invoked by the kernel when .Xr semop 2 is called with the SEM_UNDO flag and the process holding the semaphores terminates unexpectedly. Default value is 10. .It Cd option SHMMAXPGS= Ns Ar value Sets the maximum number of .At V style shared memory pages that are available through the .Xr shmget 2 system call. Default value is 1024 on most architectures. See .Pa /usr/include/machine/vmparam.h for the default. .It Cd option SYSVMSG Includes support for .At V style message queues. See .Xr msgctl 2 , .Xr msgget 2 , .Xr msgrcv 2 , .Xr msgsnd 2 . .It Cd option SYSVSEM Includes support for .At V style semaphores. See .Xr semctl 2 , .Xr semget 2 , .Xr semop 2 . .It Cd option SYSVSHM Includes support for .At V style shared memory. See .Xr shmat 2 , .Xr shmctl 2 , .Xr shmdt 2 , .Xr shmget 2 . .El .Sh SEE ALSO .Xr intro 4 , .Xr files.conf 5 , .Xr config 8 , .Xr sysctl 8 .Sh HISTORY The .Nm man page first appeared in .Ox 2.3 .