.\" $OpenBSD: scsi.4,v 1.26 2006/07/19 13:24:32 jmc Exp $ .\" .\" Copyright (c) 1996 .\" Julian Elischer . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .Dd March 12, 2004 .Dt SCSI 4 .Os .Sh NAME .Nm scsi .Nd scsi system .Sh SYNOPSIS .Cd "scsibus at ..." .Pp .Cd "cd* at scsibus?" .Cd "ch* at scsibus?" .Cd "safte* at scsibus?" .Cd "sd* at scsibus?" .Cd "ses* at scsibus?" .Cd "st* at scsibus?" .Cd "ss* at scsibus?" .Cd "uk* at scsibus?" .Sh DESCRIPTION The .Em SCSI system provides a uniform and modular system for the implementation of drivers to control various scsi devices, and to utilize different scsi host adapters through host adapter drivers. When the system probes the .Em SCSI busses, it attaches any devices it finds to the appropriate drivers. If no driver seems appropriate, then it attaches the device to the uk (unknown) driver so that user level scsi ioctls may still be performed against the device. .Sh KERNEL CONFIGURATION The option SCSIDEBUG enables the debug ioctl. .Pp All devices and the SCSI busses support boot time allocation so that an upper number of devices and controllers does not need to be configured; .Cd "sd* at scsibus?" will suffice for any number of disk drivers. .Pp The devices are either .Em wired so they appear as a particular device unit or .Em counted so that they appear as the next available unused unit. .Pp To configure a driver in the kernel without wiring down the device use a config line similar to .Cd "ch* at scsibus?" to include the changer driver. .Pp To wire down a unit use a config line similar to .Cd "ch1 at scsibus0 target 4 lun 0" to assign changer 1 as the changer with SCSI ID 4, SCSI logical unit 0 on SCSI bus 0. Individual scsibuses can be wired down to specific controllers with a config line similar to .Cd "scsibus0 at ahc0" which assigns scsi bus 0 to the first unit using the ahc driver. For controllers supporting more than one bus, the particular bus can be specified as in .Cd "scsibus3 at ahc1 bus 1" which assigns scsibus 1 to the second bus probed on the ahc1 device. .Pp When there is a mixture of wired down and counted devices then the counting begins with the first non-wired down unit for a particular type. That is, if a disk is wired down as .Cd "sd1 at scsibus?" , then the first non-wired disk shall come on line as .Em sd2 . .Sh IOCTLS There are a number of ioctls that work on any .Em SCSI device. They are defined in .Aq Pa sys/scsiio.h and can be applied against any scsi device that permits them. For the tape, it must be applied against the control device. See the manual page for each device type for more information about how generic scsi ioctls may be applied to a specific device. .Bl -tag -width DIOCSDINFO____ .It Dv SCIOCRESET* Reset a device. .It Dv SCIOCDEBUG Turn on debugging. All scsi operations originating from this device's driver will be traced to the console, along with other information. Debugging is controlled by four bits, described in the header file. If no debugging is configured into the kernel, debugging will have no effect. .Em SCSI debugging is controlled by the configuration option .Em SCSIDEBUG . .It Dv SCIOCCOMMAND Take a scsi command and data from a user process and apply them to the scsi device. Return all status information and return data to the process. The ioctl will return a successful status even if the device rejected the command. As all status is returned to the user, it is up to the user process to examine this information to decide the success of the command. .It Dv SCIOCREPROBE Ask the system to probe the scsi busses for any new devices. If it finds any, they will be attached to the appropriate drivers. The search can be narrowed to a specific bus, target or lun. The new device may or may not be related to the device on which the ioctl was performed. .It Dv SCIOCIDENTIFY Ask the driver what its bus, target and lun are. In addition, the device type, ATAPI or SCSI, is returned. .It Dv SCIOCDECONFIG Ask the device to disappear. This may not happen if the device is in use. .El .Sh ADAPTERS The system allows common device drivers to work through many different types of adapters. The adapters take requests from the upper layers and do all IO between the .Em SCSI bus and the system. The maximum size of a transfer is governed by the adapter. Most adapters can transfer 64KB in a single operation, and many can transfer larger amounts. .Sh DIAGNOSTICS When the kernel is compiled with option SCSIDEBUG, the SCIOCDEBUG ioctl can be used to enable various amounts of tracing information on any specific device. Devices not being traced will not produce trace information. The four bits that make up the debug level each control certain types of debugging information. .Bl -tag -width "Bit 0" .It Dv Bit 0 shows all scsi bus operations including scsi commands, error information and the first 48 bytes of any data transferred. .It Dv Bit 1 shows routines called. .It Dv Bit 2 shows information about what branches are taken and often some of the return values of functions. .It Dv Bit 3 shows more detailed information including DMA scatter-gather logs. .El .Sh SEE ALSO .Xr cd 4 , .Xr ch 4 , .Xr intro 4 , .Xr safte 4 , .Xr sd 4 , .Xr ses 4 , .Xr ss 4 , .Xr st 4 , .Xr uk 4 , .Xr scsi 8 .Sh HISTORY This .Nm system appeared in MACH 2.5 at TRW.