.\" $OpenBSD: sis.4,v 1.24 2005/09/30 20:34:24 jaredy Exp $ .\" .\" Copyright (c) 1997, 1998, 1999 .\" Bill Paul . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Bill Paul. .\" 4. Neither the name of the author nor the names of any co-contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD: src/share/man/man4/sis.4,v 1.2 1999/11/15 23:14:27 phantom Exp $ .\" .Dd September 4, 1999 .Dt SIS 4 .Os .Sh NAME .Nm sis .Nd "SiS 900, SiS 7016, and NS DP83815/6 Fast Ethernet driver" .Sh SYNOPSIS .Cd "sis* at pci?" .Cd "icsphy* at mii?" .Cd "nsphyter* at mii?" .Cd "rlphy* at mii?" .Sh DESCRIPTION The .Nm driver provides support for PCI Ethernet adapters and embedded controllers based on the Silicon Integrated Systems SiS 900 and SiS 7016 Fast Ethernet controller chips, as well as support for adapters based on National Semiconductor DP83815 (MacPHYTER) and DP83816 (MacPHYTER-II) PCI Ethernet controller chips, including the Netgear FA311, FA312 and FA331, and the embedded controllers on Soekris net4xxx single-board computers and lan16x1 multi-port PCI Ethernet adapters. .Pp The SiS 900 is a 100Mbps Ethernet MAC and MII-compliant transceiver in a single package. It uses a bus master DMA and a scatter/gather descriptor scheme. The SiS 7016 is similar to the SiS 900 except that it has no internal PHY, requiring instead an external transceiver to be attached to its MII interface. The SiS 900 and SiS 7016 both have a 128-bit multicast hash filter and a single perfect filter entry for the station address. .Pp The NS DP83815 and DP83816 are also 100Mbps Ethernet MACs with integrated PHY. The NatSemi chips and the SiS chips share many of the same features and a fairly similar programming interface, and hence are supported by the same driver. .Pp The .Nm driver supports the following media types: .Bl -tag -width full-duplex .It autoselect Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to the .Xr hostname.if 5 file. .It 10baseT Set 10Mbps operation. The .Ar mediaopt option can also be used to select either .Ar full-duplex or .Ar half-duplex modes. .It 100baseTX Set 100Mbps (Fast Ethernet) operation. The .Ar mediaopt option can also be used to select either .Ar full-duplex or .Ar half-duplex modes. .El .Pp The .Nm driver supports the following media options: .Bl -tag -width full-duplex .It full-duplex Force full duplex operation. .It half-duplex Force half duplex operation. .El .Pp For more information on configuring this device, see .Xr ifconfig 8 . .Sh DIAGNOSTICS .Bl -diag .It "sis%d: couldn't map ports/memory" A fatal initialization error has occurred. .It "sis%d: couldn't map interrupt" A fatal initialization error has occurred. .It "sis%d: watchdog timeout" The device has stopped responding to the network, or there is a problem with the network connection (cable). .It "sis%d: no memory for rx list" The driver failed to allocate an mbuf for the receiver ring. .It "sis%d: no memory for tx list" The driver failed to allocate an mbuf for the transmitter ring when allocating a pad buffer or collapsing an mbuf chain into a cluster. .It "sis%d: chip is in D3 power state -- setting to D0" This message applies only to adapters which support power management. Some operating systems place the controller in low power mode when shutting down, and some PCI BIOSes fail to bring the chip out of this state before configuring it. The controller loses all of its PCI configuration in the D3 state, so if the BIOS does not set it back to full power mode in time, it won't be able to configure it correctly. The driver tries to detect this condition and bring the adapter back to the D0 (full power) state, but this may not be enough to return the driver to a fully operational condition. If this message appears at boot time and the driver fails to attach the device as a network interface, a second warm boot will have to be performed to have the device properly configured. .Pp Note that this condition only occurs when warm booting from another operating system. If the system is powered down prior to booting .Ox , the card should be configured correctly. .El .Sh SEE ALSO .Xr arp 4 , .Xr icsphy 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr nsphyter 4 , .Xr pci 4 , .Xr rlphy 4 , .Xr hostname.if 5 , .Xr ifconfig 8 .Rs .%T SiS 900 and SiS 7016 datasheets .%O http://www.sis.com.tw .Re .Rs .%T NatSemi DP83815 and DP83816 datasheets .%O http://www.national.com .Re .Sh HISTORY The .Nm device driver first appeared in .Fx 3.0 . .Ox support was added in .Ox 2.7 . .Sh AUTHORS .An -nosplit The .Nm driver was written by .An Bill Paul Aq wpaul@ee.columbia.edu and ported to .Ox by .An Aaron Campbell Aq aaron@openbsd.org .