.\" $OpenBSD: tun.4,v 1.31 2004/07/28 21:46:04 jmc Exp $ .\" .\" Copyright (c) 2003 Marcus D. Watts All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, and the entire permission notice in its entirety, .\" including the disclaimer of warranties. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. The name of the author may not be used to endorse or promote .\" products derived from this software without specific prior .\" written permission. .\" .\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, .\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY .\" AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL .\" MARCUS D. WATTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, .\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS .\" OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND .\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR .\" TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE .\" USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .Dd March 9, 2003 .Dt TUN 4 .Os .Sh NAME .Nm tun .Nd network tunnel pseudo-device .Sh SYNOPSIS .Cd "pseudo-device tun" Op Ar count .Pp .Fd #include .Fd #include .Sh DESCRIPTION The .Nm driver provides a network interface pseudo-device. Packets sent to this interface can be read by a userland process and processed as desired. Packets written by the userland process are injected back into the kernel networking subsystem. .Pp A .Nm interface can be created at runtime using the .Ic ifconfig tunN create command or by opening the character special device .Pa /dev/tunN . .Pp Both layer 3 and layer 2 tunneling is supported. Layer 3 tunneling is the default mode; to enable layer 2 tunneling mode the .Ar link0 flag needs to be set with .Xr ifconfig 8 , or by setting up a .Xr hostname.if 5 configuration file for .Xr netstart 8 . In layer 2 mode the .Nm interface is simulating an Ethernet network interface. .Pp Each device has the exclusive open property; it cannot be opened if it is already open and in use by another process. Each read returns at most one packet; if insufficient buffer space is provided, the packet is truncated. Each write supplies exactly one packet. Each packet read or written is prefixed with a tunnel header consisting of a 4-byte network byte order integer containing the address family in the case of layer 3 tunneling. In layer 2 mode the 4-byte tunnel header is replaced with an Ethernet header. On the last close of the device, all packets are discarded, the device is marked down, and all routes via the device are removed. .Pp Writes never block. If the protocol queue is full, the packet is dropped, a ``collision'' is counted, and .Er ENOBUFS is returned. .Pp In addition to the usual network interface ioctl commands described in .Xr netintro 4 , the following special commands defined in .Aq Pa net/if_tun.h are supported: .Pp .Bl -tag -width indent -compact .It Dv TUNGIFINFO (struct tuninfo) .It Dv TUNSIFINFO (struct tuninfo) Can be used to get or set the interface characteristics. .Bd -literal /* iface info */ struct tuninfo { u_int mtu; u_short type; u_short flags; u_int baudrate; }; .Ed .Pp .Va flags sets the interface flags, and can include one or more of .Dv IFF_UP , .Dv IFF_POINTOPOINT , .Dv IFF_MULTICAST , .Dv IFF_BROADCAST . It defaults to .Dv IFF_POINTOPOINT . It is an error to set both .Dv IFF_POINTOPOINT and .Dv IFF_BROADCAST . .\" should say what type affects... .Va type defaults to .Dv IFT_PROPVIRTUAL but can be set to .Dv IFT_PPP . This sets the interface media address header type. .Pp .It Dv TUNSIFMODE Fa int *flags Can be used to just set the interface flags. .It Dv FIONBIO Fa int *flag Can be used to set non-blocking I/O. .It Dv FIOASYNC Fa int *flag Can be used to cause signal .Dv SIGIO to be sent when a packet can be read. .It Dv TIOCSPGRP Fa int *pgrp .It Dv TIOCGPGRP Fa int *pgrp Get or set the process group to which signals might be sent via .Dv FIOASYNC . .It Dv FIONREAD Fa int *count Gets the byte count of the next packet available to be read. .It Dv SIOCGIFADDR Fa struct ether_addr *addr .It Dv SIOCSIFADDR Fa struct ether_addr *addr Get or set the Ethernet address of the device in layer 2 mode. .El .Sh FILES .Bl -tag -width /dev/tun* -compact .It Pa /dev/tun* .El .Sh ERRORS If open fails, .Xr errno 2 may be set to one of: .Bl -tag -width Er .It Bq Eq EPERM Only the superuser may open the device. .It Bq Eq ENXIO Not that many devices configured. .It Bq Eq EBUSY Device was already open. .El .Pp If a .Xr write 2 call fails, .Xr errno 2 is set to one of: .Bl -tag -width Er .It Bq Eq EMSGSIZE The packet supplied was too small or too large. The maximum sized packet allowed is currently 16384 bytes. .It Bq Eq ENOBUFS There were no mbufs, or the queue for the outgoing protocol is full. .It Bq Eq EAFNOSUPPORT The address family specified in the tunnel header was not recognized. .El .Pp Ioctl commands may fail with: .Bl -tag -width Er .It Bq EINVAL Attempt to set both .Dv IFF_POINTOPOINT and .Dv IFF_BROADCAST with .Dv TUNSIFMODE or using .Dv SIOCGIFADDR or .Dv SIOCSIFADDR in layer 3 mode. .It Bq ENOTTY Unrecognized ioctl command. .El .Pp A .Xr read 2 call may fail because of: .Bl -tag -width Er .It Bq Eq EHOSTDOWN The device is not ready. The device must have an .Xr inet 4 interface address assigned to it, such as via .Dv SIOCSIFADDR . .It Bq Eq EWOULDBLOCK Non-blocking I/O was selected and no packets were available. .El .Pp An attempt to send a packet out via the interface may fail with: .Bl -tag -width Er .It Bq Eq EHOSTDOWN The device is not ready. The device must have an .Xr inet 4 interface address assigned to it, such as via .Dv SIOCSIFADDR . .El .Sh SEE ALSO .Xr inet 4 , .Xr intro 4 , .Xr netintro 4 , .Xr hostname.if 5 , .Xr ifconfig 8 , .Xr netstart 8 .Sh BUGS There is no way to set .Dv TUN_STAYUP . .Pp .Dv TUNSIFINFO does no checking on .Va flags .