.\" $OpenBSD: uath.4,v 1.18 2010/03/28 17:27:10 jasper Exp $ .\" .\" Copyright (c) 2006 .\" Damien Bergamini .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: March 28 2010 $ .Os .Dt UATH 4 .Sh NAME .Nm uath .Nd Atheros USB IEEE 802.11a/b/g wireless network device .Sh SYNOPSIS .Cd "uath* at uhub? port ?" .Sh DESCRIPTION The .Nm driver supports USB 2.0 wireless network devices based on Atheros Communications fifth generation AR5005UG and AR5005UX chipsets. .Pp The AR5005UG chipset is made of an AR5523 multiprotocol MAC/baseband processor and an AR2112 Radio-on-a-Chip that can operate between 2300 and 2500 MHz (802.11b/g). .Pp The AR5005UX chipset is made of an AR5523 multiprotocol MAC/baseband processor and an AR5112 dual band Radio-on-a-Chip that can operate between 2300 and 2500 MHz (802.11b/g) or 4900 and 5850 MHz (802.11a). .Pp The AR5005UG and AR5005UX chipsets both have an integrated 32-bit MIPS R4000-class processor that runs a firmware and manages, among other things, the automatic control of the transmit rate and the calibration of the radio. .Pp These are the modes the .Nm driver can operate in: .Bl -tag -width "IBSS-masterXX" .It BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .It monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. .El .Pp .Nm supports hardware WEP. Wired Equivalent Privacy (WEP) is the de facto encryption standard for wireless networks. It can be typically configured in one of three modes: no encryption; 40-bit encryption; or 104-bit encryption. Unfortunately, due to serious weaknesses in WEP protocol it is strongly recommended that it not be used as the sole mechanism to secure wireless communication. WEP is not enabled by default. .Pp The .Nm driver can be configured at runtime with .Xr ifconfig 8 or on boot with .Xr hostname.if 5 . .Sh FILES The following firmware file is loaded when a device is plugged: .Pp .Bl -tag -width Ds -offset indent -compact .It /etc/firmware/uath-ar5523 .El .Pp This firmware file is not freely redistributable. .Pp A prepackaged version of the firmware, designed to be used with .Xr pkg_add 1 , can be found at: .Bd -literal -offset 3n http://damien.bergamini.free.fr/packages/openbsd/uath-firmware-1.0p0.tgz .Ed .Sh HARDWARE The following adapters should work: .Pp .Bl -column -compact "TRENDware International TEW-444UB" "AR5005UX" -offset 6n .It Em "Adapter Chipset" .\".It Belkin F6D3050 AR5005UX .It Li "Compex WLU108AG" Ta AR5005UX .It Li "Compex WLU108G" Ta AR5005UG .\".It Li "D-Link DWL-AG132" Ta AR5005UX .It Li "D-Link DWL-G132" Ta AR5005UG .\".It Li "Edimax EW-7315Ug" Ta AR5005UG (AR2414???) .\".It Li "Lancom USB-54ag" Ta AR5005UX .\".It Li "NEC WL54TU" Ta AR5005UX .It Li "IODATA WN-G54/US" Ta AR5005UG .It Li "MELCO WLI-U2-KAMG54" Ta AR5005UX .It Li "Netgear WG111T" Ta AR5005UG .It Li "Netgear WG111U" Ta AR5005UX .It Li "Netgear WPN111" Ta AR5005UG .It Li "Olitec 000544" Ta AR5005UG .It Li "Philips SNU6500" Ta AR5005UG .It Li "PLANET WDL-U357" Ta AR5005UX .\".It Li "Senao WUB-8004" Ta AR5005UX .It Li "Siemens Gigaset 108" Ta AR5005UG .It Li "SMC SMCWUSBT-G" Ta AR5005UG .It Li "SMC SMCWUSBT-G2" Ta AR5005UG .\".It Li "SparkLAN WL-685GS" Ta AR5005UG .It Li "SparkLAN WL-785A" Ta AR5005UX .It Li "TP-Link TL-WN620G" Ta AR5005UG .It Li "TRENDware International TEW-444UB" Ta AR5005UG .It Li "TRENDware International TEW-504UB" Ta AR5005UX .It Li "Unex Technology UR054ag" Ta AR5005UX .\".It Li "Wistron NeWeb DCUA-81" Ta AR5005UX .\".It Li "Wistron NeWeb DRUA-81" Ta AR5005UG .\".It Li "Wistron NeWeb DRUA-82" Ta AR5005UX .\".It Li "ZyXEL G-200 v2" Ta AR5005UG .It Li "ZyXEL XtremeMIMO M-202" Ta AR5005UX .El .Pp An up to date list can be found at .Pa http://customerproducts.atheros.com/customerproducts/default.asp . .Sh EXAMPLES The following .Xr hostname.if 5 example configures uath0 to join whatever network is available on boot, using WEP key .Dq 0x1deadbeef1 , channel 11, obtaining an IP address using DHCP: .Bd -literal -offset indent dhcp NONE NONE NONE nwkey 0x1deadbeef1 chan 11 .Ed .Pp Configure uath0 for WEP, using hex key .Dq 0x1deadbeef1 : .Bd -literal -offset indent # ifconfig uath0 nwkey 0x1deadbeef1 .Ed .Pp Return uath0 to its default settings: .Bd -literal -offset indent # ifconfig uath0 -bssid -chan media autoselect \e nwid "" -nwkey .Ed .Pp Join an existing BSS network, .Dq my_net : .Bd -literal -offset indent # ifconfig uath0 192.168.1.1 netmask 0xffffff00 nwid my_net .Ed .Sh DIAGNOSTICS .Bl -diag .It "uath%d: error %d, could not read firmware %s" For some reason, the driver was unable to read the firmware image from the filesystem. The file might be missing or corrupted. .It "uath%d: could not load firmware (error=%s)" An error occurred while attempting to upload the firmware to the onboard MIPS R4000 processor. .It "uath%d: could not initialize adapter (error=%d)" The firmware was uploaded successfully but did not initialize properly or in time. .It "uath%d: could not send command (error=%s)" An attempt to send a command to the firmware failed. .It "uath%d: timeout waiting for command reply" A read command was sent to the firmware but the firmware failed to reply in time. .It "uath%d: device timeout" A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware. This should not happen. .El .Sh SEE ALSO .Xr arp 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr usb 4 , .Xr hostname.if 5 , .Xr ifconfig 8 .Pp Atheros Communications AR5005UG/AR5005UX: .Pa http://www.atheros.com/pt/bulletins/AR5005UGBulletin.pdf .Pa http://www.atheros.com/pt/bulletins/AR5005UXBulletin.pdf .Sh HISTORY The .Nm driver first appeared in .Ox 4.0 . .Sh AUTHORS The .Nm driver was written by .An Damien Bergamini Aq damien@openbsd.org . .Sh CAVEATS Atheros Communications refuses to release any documentation for their products. Atheros proprietary 108 Mbps mode (aka Super AG mode) is not supported. .Pp The .Nm driver does not attempt to do any regulation of radio frequencies.