.\" $OpenBSD: upgt.4,v 1.2 2007/12/16 11:17:47 jmc Exp $ .\" .\" Copyright (c) 2007 Marcus Glocker .\" Copyright (c) 2005-2007 .\" Damien Bergamini .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .\" .\" .\" Copyright (c) 2006 Theo de Raadt. .\" Copyright (c) 2006 The DragonFly Project. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in .\" the documentation and/or other materials provided with the .\" distribution. .\" 3. Neither the name of The DragonFly Project nor the names of its .\" contributors may be used to endorse or promote products derived .\" from this software without specific, prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS .\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT .\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS .\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE .\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, .\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; .\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED .\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, .\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT .\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .Dd $Mdocdate: December 16 2007 $ .Os .Dt UPGT 4 .Sh NAME .Nm upgt .Nd Conexant/Intersil PrismGT SoftMAC USB IEEE 802.11b/g wireless network device .Sh SYNOPSIS .Cd "upgt* at uhub? port ?" .Sh DESCRIPTION The .Nm driver supports the USB 2.0 Conexant/Intersil PrismGT series wireless adapters based on the GW3887 chipset. .Pp These are the modes the .Nm driver can operate in: .Bl -tag -width "IBSS-masterXX" .It BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .\" .It IBSS mode .\" Also known as .\" .Em IEEE ad-hoc .\" mode or .\" .Em peer-to-peer .\" mode. .\" This is the standardized method of operating without an access point. .\" Stations associate with a service set. .\" However, actual connections between stations are peer-to-peer. .\" .It Host AP .\" In this mode the driver acts as an access point (base station) .\" for other cards. .It monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. .El .Pp .Nm supports software WEP. Wired Equivalent Privacy (WEP) is the de facto encryption standard for wireless networks. It can be typically configured in one of three modes: no encryption; 40-bit encryption; or 104-bit encryption. Unfortunately, due to serious weaknesses in WEP protocol it is strongly recommended that it not be used as the sole mechanism to secure wireless communication. WEP is not enabled by default. .\".Pp .\"The transmit speed is user-selectable or can be adapted automatically by the .\"driver depending on the received signal strength and on the number of hardware .\"transmission retries. .Sh CONFIGURATION The .Nm driver can be configured at runtime with .Xr ifconfig 8 or on boot with .Xr hostname.if 5 using the following parameters: .Bl -tag -width Ds .It Cm bssid Ar bssid Set the desired BSSID. .It Fl bssid Unset the desired BSSID. The interface will automatically select a BSSID in this mode, which is the default. .It Cm chan Ar n Set the channel (radio frequency) to be used by the driver based on the given channel ID .Ar n . .It Fl chan Unset the desired channel to be used by the driver. The driver will automatically select a channel in this mode, which is the default. .It Cm media Ar media The .Nm driver supports the following .Ar media types: .Pp .Bl -tag -width autoselect -compact .It Cm autoselect Enable autoselection of the media type and options. .It Cm DS1 Set 802.11b DS 1Mbps operation. .It Cm DS2 Set 802.11b DS 2Mbps operation. .It Cm DS5 Set 802.11b DS 5.5Mbps operation. .It Cm DS11 Set 802.11b DS 11Mbps operation. .It Cm OFDM6 Set 802.11g OFDM 6Mbps operation. .It Cm OFDM9 Set 802.11g OFDM 9Mbps operation. .It Cm OFDM12 Set 802.11g OFDM 12Mbps operation. .It Cm OFDM18 Set 802.11g OFDM 18Mbps operation. .It Cm OFDM24 Set 802.11g OFDM 24Mbps operation. .It Cm OFDM36 Set 802.11g OFDM 36Mbps operation. .It Cm OFDM48 Set 802.11g OFDM 48Mbps operation. .It Cm OFDM54 Set 802.11g OFDM 54Mbps operation. .El .It Cm mediaopt Ar opts The .Nm driver supports the following media options: .Pp .Bl -tag -width monitor -compact .\".It Cm hostap .\"Select Host AP operation. .\".It Cm ibss .\"Select IBSS operation. .It Cm monitor Select monitor mode. .El .It Fl mediaopt Ar opts Disable the specified media options on the driver and return it to the default mode of operation (BSS). .It Cm mode Ar mode The .Nm driver supports the following modes: .Pp .Bl -tag -width 11b -compact .It Cm 11b Force 802.11b operation. .It Cm 11g Force 802.11g operation. .El .It Cm nwid Ar id Set the network ID. The .Ar id can either be any text string up to 32 characters in length, or a series of hexadecimal digits up to 64 digits. An empty .Ar id string allows the interface to connect to any available access points. By default the .Nm driver uses an empty string. Note that network ID is synonymous with Extended Service Set ID (ESSID). .It Fl nwid Set the network ID to the empty string to allow the interface to connect to any available access point. .It Cm nwkey Ar key Enable WEP encryption using the specified .Ar key . The .Ar key can either be a string, a series of hexadecimal digits (preceded by .Sq 0x ) , or a set of keys of the form .Dq n:k1,k2,k3,k4 , where .Sq n specifies which of the keys will be used for transmitted packets, and the four keys, .Dq k1 through .Dq k4 , are configured as WEP keys. If a set of keys is specified, a comma .Pq Sq \&, within the key must be escaped with a backslash. Note that if multiple keys are used, their order must be the same within the network. .Nm is capable of using both 40-bit (5 characters or 10 hexadecimal digits) or 104-bit (13 characters or 26 hexadecimal digits) keys. .It Fl nwkey Disable WEP encryption. This is the default mode of operation. .El .Sh FILES The driver needs a firmware file which is loaded when an interface is brought up: .Pp .Bl -tag -width Ds -offset indent -compact .It Pa /etc/firmware/upgt-v2 .El .\".Pp .\"These firmware files are not free because Conexant/Intersil refuses .\"to grant distribution rights. .\"As a result, even though .\".Ox .\"includes the driver, the firmware files cannot be included and .\"users have to download these files on their own. .Pp A prepackaged version of the firmware, designed to be used with .Xr pkg_add 1 , can be found at: .Bd -literal -offset indent http://www.nazgul.ch/upgt/upgt-firmware-1.0.tgz .Ed .Sh HARDWARE The following adapters should work: .Pp .Bl -tag -width Ds -offset indent -compact .It SMC EZ ConnectG SMC2862W-G .El .Sh EXAMPLES The following .Xr hostname.if 5 example configures upgt0 to join whatever network is available on boot, using WEP key .Dq 0x1deadbeef1 , channel 11, obtaining an IP address using DHCP: .Bd -literal -offset indent dhcp NONE NONE NONE nwkey 0x1deadbeef1 chan 11 .\".Ed .\".Pp .\"The following .\".Xr hostname.if 5 .\"example creates a host-based access point on boot: .\".Bd -literal -offset indent .\"inet 192.168.1.1 255.255.255.0 NONE media autoselect \e .\" mediaopt hostap nwid my_net chan 11 .Ed .Pp Configure upgt0 for WEP, using hex key .Dq 0x1deadbeef1 : .Bd -literal -offset indent # ifconfig upgt0 nwkey 0x1deadbeef1 .Ed .Pp Return upgt0 to its default settings: .Bd -literal -offset indent # ifconfig upgt0 -bssid -chan media autoselect \e nwid "" -nwkey .Ed .Pp Join an existing BSS network, .Dq my_net : .Bd -literal -offset indent # ifconfig upgt0 192.168.1.1 netmask 0xffffff00 nwid my_net .Ed .Sh SEE ALSO .Xr arp 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr usb 4 , .Xr hostname.if 5 , .\".Xr hostapd 8 , .Xr ifconfig 8 .Sh HISTORY The .Nm driver first appeared in .Ox 4.3 . .Sh AUTHORS .An -nosplit The .Nm driver was written by .An Marcus Glocker Aq mglocker@openbsd.org . .Pp The hardware specification was reverse engineered by the people at .Pa http://www.prism54.org . .Sh CAVEATS The .Nm driver just supports the USB 2.0 devices (GW3887 chipset) but not the USB 1.0 devices containing the NET2280, ISL3880, and ISL3886 chipsets. Some further efforts would be necessary to add USB 1.0 support to the driver.