.\" $OpenBSD: ural.4,v 1.22 2016/06/16 17:25:32 martijn Exp $ .\" .\" Copyright (c) 2005-2007 .\" Damien Bergamini .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: June 16 2016 $ .Dt URAL 4 .Os .Sh NAME .Nm ural .Nd Ralink Technology/MediaTek USB IEEE 802.11b/g wireless network device .Sh SYNOPSIS .Cd "ural* at uhub? port ?" .Sh DESCRIPTION The .Nm driver supports USB 2.0 wireless adapters based on the Ralink RT2500USB chipset. .Pp The RT2500USB chipset is the first generation of 802.11b/g adapters from Ralink. It consists of two integrated chips, an RT2570 MAC/BBP and an RT2526 radio transceiver. .Pp These are the modes the .Nm driver can operate in: .Bl -tag -width "IBSS-masterXX" .It BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .It IBSS mode Also known as .Em IEEE ad-hoc mode or .Em peer-to-peer mode. This is the standardized method of operating without an access point. Stations associate with a service set. However, actual connections between stations are peer-to-peer. .It Host AP In this mode the driver acts as an access point (base station) for other cards. .It monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. .El .Pp The .Nm driver can be configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA-PSK and WPA2-PSK). WPA is the current encryption standard for wireless networks. It is strongly recommended that WEP not be used as the sole mechanism to secure wireless communication, due to serious weaknesses in it. The .Nm driver relies on the software 802.11 stack for both encryption and decryption of data frames. .Pp The transmit speed is user-selectable or can be adapted automatically by the driver depending on the number of hardware transmission retries. .Pp The .Nm driver can be configured at runtime with .Xr ifconfig 8 or on boot with .Xr hostname.if 5 . .Sh HARDWARE The following adapters should work: .Pp .Bl -tag -width Ds -offset indent -compact .It AMIT WL532U .It ASUS WL-167g v1 .It Belkin F5D7050 v2000 .It Buffalo WLI-U2-KG54 .It Buffalo WLI-U2-KG54-AI .It Buffalo WLI-U2-KG54-YB .It CNet CWD-854 .It Compex WLU54G 2A1100 .It Conceptronic C54RU .It D-Link DWL-G122 (b1) .It Dynalink WLG25USB .It E-Tech WGUS02 .It Eminent EM3035 .It Gigabyte GN-WBKG .It Hercules HWGUSB2-54 .It KCORP LifeStyle KLS-685 .It Linksys HU200-TS .It Linksys WUSB54G v4 .It Linksys WUSB54GP v4 .It MSI MS-6861 .It MSI MS-6865 .It MSI MS-6869 .It Nintendo Wi-Fi USB Connector .It Nova Tech NV-902W .It OvisLink Evo-W54USB .It SerComm UB801R .It SparkLAN WL-685R .It Sphairon UB801R .It Surecom EP-9001-g rev 3A .It Sweex LC100060 .It Tonze UW-6200C .It Zaapa ZNWUSB-54 .It Zinwell ZPlus-G250 .It Zinwell ZWX-G261 .It Zonet ZEW2500P .El .Sh EXAMPLES The following example scans for available networks: .Pp .Dl # ifconfig ural0 scan .Pp The following .Xr hostname.if 5 example configures ural0 to join network .Dq mynwid , using WPA key .Dq mywpakey , obtaining an IP address using DHCP: .Bd -literal -offset indent nwid mynwid wpakey mywpakey dhcp .Ed .Pp The following .Xr hostname.if 5 example creates a host-based access point on boot: .Bd -literal -offset indent mediaopt hostap nwid mynwid wpakey mywpakey inet 192.168.1.1 255.255.255.0 .Ed .Sh DIAGNOSTICS .Bl -diag .It "ural0: device timeout" A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware. This should not happen. .El .Sh SEE ALSO .Xr arp 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr usb 4 , .Xr hostname.if 5 , .Xr hostapd 8 , .Xr ifconfig 8 .Sh HISTORY The .Nm driver first appeared in .Ox 3.7 . .Sh AUTHORS The .Nm driver was written by .An Damien Bergamini Aq Mt damien.bergamini@free.fr . .Sh CAVEATS The .Nm driver supports automatic control of the transmit speed in BSS mode only. Therefore the use of an .Nm adapter in Host AP mode is discouraged. .Pp Host AP mode doesn't support power saving. Clients attempting to use power saving mode may experience significant packet loss (disabling power saving on the client will fix this).