.\" $OpenBSD: vlan.4,v 1.50 2018/11/16 08:43:52 dlg Exp $
.\"
.\" Copyright (c) 2000 The NetBSD Foundation, Inc.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to The NetBSD Foundation
.\" by Jason R. Thorpe of Zembu Labs, Inc.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd $Mdocdate: November 16 2018 $
.Dt VLAN 4
.Os
.Sh NAME
.Nm vlan ,
.Nm svlan
.Nd IEEE 802.1Q and 802.1ad pseudo-device
.Sh SYNOPSIS
.Cd "pseudo-device vlan"
.Sh DESCRIPTION
The
.Nm vlan
driver provides network interfaces supporting Virtual Local Area
Networks (VLANs) on Ethernet networks.
.Nm vlan
interfaces implement virtual networks using the IEEE 802.1Q protocol.
.Nm svlan
interfaces implement virtual networks using the IEEE 802.1ad protocol.
.Pp
.Nm svlan
interfaces allow construction of IEEE 802.1ad-compliant provider bridges.
.Nm vlan
and
.Nm svlan
interfaces can be configured to provide QinQ or stacked VLANs.
.Pp
The interfaces can be created at runtime using the
.Ic ifconfig vlan Ns Ar N Ic create
command or by setting up a
.Xr hostname.if 5
configuration file for
.Xr netstart 8 .
The interface itself can be configured with
.Xr ifconfig 8 ;
see its manual page for more information.
.Pp
.Nm vlan
and
.Nm svlan
interfaces must be configured with a parent Ethernet interface to
operate, and a virtual network identifier.
Packets transmitted through a
.Nm vlan
or
.Nm svlan
interface will be encapsulated in their respective protocols and
transmitted on the specified physical interface.
802.1Q and 802.1ad packets received on the parent interface will be
matched to the
.Nm vlan
and
.Nm svlan
interfaces by their respective protocol and virtual network
identifiers, and decapsulated for reception on the associated virtual
interfaces.
.Pp
The 802.1Q and 802.1ad protocols include a priority field.
By default, the 802.1p priority in a transmitted packet is based on the
priority of packets sent over the interface, which may
be altered via
.Xr pf.conf 5 ;
see the
.Cm prio
option for more information.
Alternatively,
.Cm txprio
can set a specific priority for transmitted packets.
.Pp
.Nm vlan
and
.Nm svlan
interfaces support the following
.Xr ioctl 2 Ns s :
.Bl -tag -width indent -offset 3n
.It Dv SIOCSIFPARENT Fa "struct if_parent *"
Set the parent interface.
The parent may only be configured while the virtual interface is
administratively down.
.It Dv SIOCGIFPARENT Fa "struct if_parent *"
Get the currently configured parent interface.
.It Dv SIOCDIFPARENT Fa "struct ifreq *"
Delete the parent interface configuration.
The parent may only be removed while the virtual interface is
administratively down.
.It Dv SIOCSVNETID Fa "struct ifreq *"
Set the virtual network identifier.
Valid identifiers are in the range 1 to 4094.
.It Dv SIOCGVNETID Fa "struct if_parent *"
Get the currently configured virtual network identifier.
.It Dv SIOCDVNETID Fa "struct ifreq *"
Clear the current virtual network identifier.
Virtual interfaces without a configured virtual network identifier
will use 0 in their protocols tag field.
.It Dv SIOCSIFLLADDR Fa "struct ifreq *"
Configure a custom MAC address on the virtual interface.
When the virtual interface is using a custom MAC address the parent
interface will be configured to promiscuously receive packets.
When operating without a custom MAC address the virtual interface
will inherit the parent interfaces MAC address.
Configuring 00:00:00:00:00:00 as the MAC address will clear the
custom MAC address configuration and resume operation with the
parents MAC address.
.El
.Pp
.Nm vlan
and
.Nm svlan
interfaces use the following capability on parent interfaces:
.Bl -tag -width "IFCAP_VLAN_HWTAGGING" -offset 3n
.It IFCAP_VLAN_MTU
The parent interface can handle full sized frames, plus the size
of the vlan tag.
.El
.Pp
.Nm vlan
interfaces use the following capability on parent interfaces:
.Bl -tag -width "IFCAP_VLAN_HWTAGGING" -offset 3n
.It IFCAP_VLAN_HWTAGGING
The parent interface will offload the encapsulation and decapsulation
of 802.1Q frames.
.El
.Sh EXAMPLES
Create an 802.1Q virtual interface on top of the physical interface
em0, with virtual network identifier 5:
.Bd -literal -offset indent
# ifconfig vlan0 create
# ifconfig vlan0 parent em0 vnetid 5
# ifconfig vlan0 10.1.1.100/24
.Ed
.Pp
Create an 802.1Q VLAN interface on network 10, on top of an 802.1ad
provider bridge on network 8, on top of the physical interface bge0:
.Bd -literal -offset indent
# ifconfig svlan0 create
# ifconfig svlan0 parent bge0 vnetid 8
# ifconfig svlan0 up
# ifconfig vlan0 create
# ifconfig vlan0 parent svlan0 vnetid 10
# ifconfig vlan0 10.1.1.101/24
.Ed
.Pp
Configure an 802.1Q VLAN interface with a custom MAC address:
.Bd -literal -offset indent
# ifconfig vlan0 lladdr fe:e1:ba:d0:84:0e
.Ed
.Pp
Remove a custom MAC address from an 802.1Q VLAN interface:
.Bd -literal -offset indent
# ifconfig vlan0 lladdr 00:00:00:00:00:00
.Ed
.Pp
Force the use of priority 1 for transmitted packets, regardless of
the packet priority:
.Bd -literal -offset indent
# ifconfig vlan0 txprio 1
.Ed
.Sh SEE ALSO
.Xr inet 4 ,
.Xr ip 4 ,
.Xr netintro 4 ,
.Xr hostname.if 5 ,
.Xr pf.conf 5 ,
.Xr ifconfig 8 ,
.Xr netstart 8
.Rs
.%T IEEE 802.1Q standard
.%U http://standards.ieee.org/getieee802/802.1.html
.Re
.Rs
.%Q Provider Bridges, QinQ
.%T IEEE 802.1ad standard
.Re
.Sh AUTHORS
Originally
.An Garrett Wollman Aq Mt wollman@freebsd.org .
.Sh CAVEATS
Some Ethernet chips will either discard or truncate
Ethernet frames that are larger than 1514 bytes.
This causes a problem as 802.1Q and 802.1ad tagged frames can be
up to 1518 bytes.
Most controller chips can be told not to discard large frames
and/or to increase the allowed frame size.