.\" $OpenBSD: vr.4,v 1.38 2014/03/15 12:52:56 sthen Exp $ .\" .\" Copyright (c) 1997, 1998 .\" Bill Paul . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Bill Paul. .\" 4. Neither the name of the author nor the names of any co-contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD: vr.4,v 1.3 1999/03/25 00:52:44 wpaul Exp $ .\" .Dd $Mdocdate: March 15 2014 $ .Dt VR 4 .Os .Sh NAME .Nm vr .Nd VIA Rhine I/II/III 10/100 Ethernet device .Sh SYNOPSIS .Cd "vr* at pci?" .Cd "amphy* at mii?" .Cd "icsphy* at mii?" .Cd "sqphy* at mii?" .Sh DESCRIPTION The .Nm driver provides support for PCI Ethernet adapters and embedded controllers based on the VIA Technologies VT3043 Rhine I, VT86C100A Rhine II, VT6102 Rhine II, and VT6105/VT6105M Rhine III Fast Ethernet controller chips, including the following: .Pp .Bl -bullet -compact .It AOpen/Acer ALN-320 .It D-Link DFE-520TX, DFE-530TX .It Hawking Technologies PN102TX .It Soekris Engineering lan1741 .El .Pp The VIA Rhine chips use bus master DMA and have a software interface designed to resemble that of the DEC 21x4x "tulip" chips. The major differences are that the receive filter in the Rhine chips is much simpler and is programmed through registers rather than by downloading a special setup frame through the transmit DMA engine, and that on older chips transmit and receive DMA buffers must be longword aligned. The Rhine chips are meant to be interfaced with external physical layer devices via an MII bus. They support both 10 and 100Mbps speeds in either full or half duplex. .Pp The .Nm driver for the VT6105M controller supports IPv4 IP/TCP/UDP transmit/receive checksum offload and VLAN tag insertion and stripping. The .Nm driver additionally supports Wake on LAN (WoL). See .Xr arp 8 and .Xr ifconfig 8 for more details. .Pp The .Nm driver supports the following media types: .Bl -tag -width full-duplex .It autoselect Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to the appropriate .Xr hostname.if 5 file. .It 10baseT Set 10Mbps operation. The .Ar mediaopt option can also be used to select either .Ar full-duplex or .Ar half-duplex modes. .It 100baseTX Set 100Mbps (Fast Ethernet) operation. The .Ar mediaopt option can also be used to select either .Ar full-duplex or .Ar half-duplex modes. .El .Pp The .Nm driver supports the following media options: .Bl -tag -width full-duplex .It full-duplex Force full duplex operation. .It half-duplex Force half duplex operation. .El .Pp Note that the 100baseTX media type is only available if supported by the adapter. .Pp For more information on configuring this device, see .Xr ifconfig 8 . .Sh DIAGNOSTICS .Bl -diag .It "vr0: couldn't map memory" A fatal initialization error has occurred. .It "vr0: couldn't map interrupt" A fatal initialization error has occurred. .It "vr0: watchdog timeout" The device has stopped responding to the network, or there is a problem with the network connection (cable). .It "vr0: no memory for rx list" The driver failed to allocate an mbuf for the receiver ring. .It "vr0: no memory for tx list" The driver failed to allocate an mbuf for the transmitter ring when allocating a pad buffer or collapsing an mbuf chain into a cluster. .El .Sh SEE ALSO .Xr amphy 4 , .Xr arp 4 , .Xr icsphy 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr pci 4 , .Xr sqphy 4 , .Xr hostname.if 5 , .Xr ifconfig 8 .Rs .%T The VIA Technologies VT86C100A data sheet .%U http://www.via.com.tw .Re .Sh HISTORY The .Nm device driver first appeared in .Fx 3.0 . .Ox support first appeared in .Ox 2.5 . .Sh AUTHORS The .Nm driver was written by .An Bill Paul Aq Mt wpaul@ctr.columbia.edu . .Sh CAVEATS The .Nm driver copies transmit mbuf chains into longword-aligned buffers prior to transmission in order to pacify the VT3043 and VT86C100A chips. If buffers are not aligned correctly, the chip will round the supplied buffer address and begin DMAing from the wrong location. This buffer copying impairs transmit performance on slower systems but can't be avoided. On faster machines (e.g., a Pentium II), the performance impact is much less noticeable.