.\" $OpenBSD: xl.4,v 1.35 2005/02/05 23:58:17 jsg Exp $ .\" .\" Copyright (c) 1997, 1998 .\" Bill Paul . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Bill Paul. .\" 4. Neither the name of the author nor the names of any co-contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD: xl.4,v 1.1 1998/08/16 17:19:58 wpaul Exp $ .\" .Dd August 16, 1998 .Dt XL 4 .Os .Sh NAME .Nm xl .Nd 3Com EtherLink XL and Fast EtherLink XL Ethernet driver .Sh SYNOPSIS .Cd "xl* at pci?" .Cd "xl* at cardbus?" .Cd "amphy* at mii?" .Cd "bmtphy* at mii?" .Cd "exphy* at mii?" .Cd "nsphy* at mii?" .Cd "tqphy* at mii?" .Sh DESCRIPTION The .Nm device driver supports the 3Com EtherLink XL and Fast EtherLink XL family of Ethernet cards, and embedded controllers based on the 3Com .Dq boomerang and .Dq cyclone bus master EtherLink XL chips. This includes, among others, the following models: .Pp .Bl -tag -width 3CXXXXX -offset indent -compact .It 3C555 EtherLink XL MiniPCI .It 3C556 EtherLink XL MiniPCI .It 3C556B EtherLink XL MiniPCI .It 3C575 10/100 LAN CardBus PC Card .It 3C656 10/100 LAN+Modem CardBus PC Card .It 3C900 EtherLink XL PCI .It 3C900B EtherLink XL PCI .It 3C905 Fast EtherLink XL PCI .It 3C905B Fast EtherLink XL PCI .It 3C905C Fast EtherLink XL PCI .It 3C980 Fast EtherLink Server NIC .It 3CSOHO OfficeConnect Fast Ethernet NIC .It 9201 NVIDIA nForce2 integrated 3Com 9201 (nForce2-ST, nForce2-GT) .It 920BEMB 3c920B-EMB-WNM Integrated Fast Ethernet. .El .Pp It also supports embedded 3C905-TX and 3C905B-TX Ethernet hardware found in certain Dell OptiPlex and Dell Precision desktop machines, as well as some Dell Latitude laptop docking stations. Other models of 3Com network cards are supported by the .Xr ec 4 , .Xr eg 4 , .Xr el 4 , .Xr ep 4 , and .Xr ie 4 drivers. .Pp Category 3, 4 or 5 unshielded twisted-pair (UTP) cable should be used for RJ-45 (10baseT), thick Ethernet coaxial (RG59 B/U, 50 ohm) for AUI/DIX, and thin Ethernet coaxial (RG58 A/U or C/U, 50 ohm +/- 4) for BNC (10base2). Some 3Com NICs also support MII connectors (switchable 10/100Mbps UTP). The 3C905B-FX and other similar cards are capable of 100Mbps over fiber. .Pp The 3C985 series of Gigabit cards are supported by the .Xr ti 4 driver. .Pp Hardware TCP/IP checksum offloading for IPv4 is supported on the 3C905B. .Pp The following media types and options (as given to .Xr ifconfig 8 ) are supported: .Bl -tag -width xxx -offset indent .It Cm media No autoselect Enable autoselection of media type and options. Note that this media type is only available with adapters that have external PHYs or built-in autonegotiation logic. For 3C900 and 3C900B adapters, the driver will choose the mode specified in the EEPROM. This can be changed by adding media options to the appropriate .Xr hostname.if 5 file. .It Cm media No 100baseFX Cm mediaopt No full-duplex For those cards that support it, force full-duplex 100Mbps operation over fiber. .It Cm media No 100baseFX Cm mediaopt No half-duplex For those cards that support it, force half-duplex 100Mbps operation over fiber. .It Cm media No 100baseTX Cm mediaopt No full-duplex Set 100Mbps (Fast Ethernet) operation and force full-duplex mode. .It Cm media No 100baseTX Cm mediaopt No half-duplex Set 100Mbps (Fast Ethernet) operation and force half-duplex mode. .It Cm media No 10baseT Cm mediaopt No full-duplex Set 10baseT (UTP) operation and force full-duplex mode. .It Cm media No 10baseT Cm mediaopt No half-duplex Set 10baseT (UTP) operation and force half-duplex mode. .It Cm media No 10base5 Set 10base5 (thick-net) operation (half-duplex only). .It Cm media No 10base2 Set 10base2 (thin-net) operation (half-duplex only). .El .Pp For more information on configuring this device, see .Xr ifconfig 8 . To view a list of media types and options supported by this card try .Ic ifconfig -m . For example, .Ic ifconfig -m xl0 . .Sh DIAGNOSTICS .Bl -diag .It "xl%d: couldn't map memory" A fatal initialization error has occurred. .It "xl%d: couldn't map interrupt" A fatal initialization error has occurred. .It "xl%d: device timeout" The device has stopped responding to the network, or there is a problem with the network connection (cable). .It "xl%d: no memory for rx list" The driver failed to allocate an mbuf for the receiver ring. .It "xl%d: no memory for tx list" The driver failed to allocate an mbuf for the transmitter ring when allocating a pad buffer or collapsing an mbuf chain into a cluster. .It "xl%d: command never completed!" Some commands issued to the 3C90x ASIC take time to complete: the driver is supposed to wait until the .Dq command in progress bit in the status register clears before continuing. In some instances, this bit may not clear. To avoid getting caught in an infinite wait loop, the driver only polls the bit a finite number of times before giving up, at which point it issues this message. This message may be printed during driver initialization on slower machines. If this message appears but the driver continues to function normally, the message can probably be ignored. .It "xl%d: chip is in D3 power state -- setting to D0" This message applies only to 3C905B adapters, which support power management. Some operating systems place the 3C905B in low power mode when shutting down, and some PCI BIOSes fail to bring the chip out of this state before configuring it. The 3C905B loses all of its PCI configuration in the D3 state, so if the BIOS does not set it back to full power mode in time, it won't be able to configure it correctly. The driver tries to detect this condition and bring the adapter back to the D0 (full power) state, but this may not be enough to return the driver to a fully operational condition. If this message appears at boot time and the driver fails to attach the device as a network interface, a second warm boot will have to be performed to have the device properly configured. .Pp Note that this condition only occurs when warm booting from another operating system. If the system is powered down prior to booting .Ox , the card should be configured correctly. .It "xl%d: WARNING: no media options bits set in the media options register!" This warning may appear when using the driver on some Dell Latitude docking stations with built-in 3C905-TX adapters. For whatever the reason, the .Dq MII available bit in the media options register on this particular equipment is not set, even though it should be (the 3C905-TX always uses an external PHY transceiver). The driver will attempt to guess the proper media type based on the PCI device ID word. The driver makes a lot of noise about this condition because the author considers it a manufacturing defect. .El .Sh SEE ALSO .Xr amphy 4 , .Xr arp 4 , .Xr bmtphy 4 , .Xr cardbus 4 , .Xr ec 4 , .Xr eg 4 , .Xr el 4 , .Xr ep 4 , .Xr exphy 4 , .Xr ie 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr nsphy 4 , .Xr ti 4 , .Xr tqphy 4 , .Xr hostname.if 5 , .Xr ifconfig 8 .Sh HISTORY The .Nm device driver first appeared in .Fx 3.0 . .Ox support was added in .Ox 2.4 . .Sh AUTHORS The .Nm driver was written by .An Bill Paul Aq wpaul@ctr.columbia.edu .