.\" $OpenBSD: sosplice.9,v 1.7 2013/07/17 20:21:55 schwarze Exp $ .\" .\" Copyright (c) 2011-2013 Alexander Bluhm .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: July 17 2013 $ .Dt SOSPLICE 9 .Os .Sh NAME .Nm sosplice , .Nm somove .Nd splice two sockets for zero-copy data transfer .Sh SYNOPSIS .Ft int .Fn sosplice "struct socket *so" "int fd" "off_t max" "struct timeval *tv" .Ft int .Fn somove "struct socket *so" "int wait" .Sh DESCRIPTION The function .Fn sosplice is used to splice together a source and a drain socket. The source socket is passed as the .Fa so argument; the file descriptor of the drain is passed in .Fa fd . If .Fa fd is negative, an existing splicing gets dissolved. If .Fa max is positive, at most that many bytes will get transferred. If .Fa tv is not NULL, a .Xr timeout 9 is scheduled to dissolve splicing in the case when no data can be transferred for the specified period of time. Socket splicing can be invoked from userland via the .Xr setsockopt 2 system-call at the .Dv SOL_SOCKET level with the socket option .Dv SO_SPLICE . .Pp Before connecting both sockets, several checks are executed. See the .Sx ERRORS section for possible failures. The connection between both sockets is implemented by setting these additional fields in .Vt struct socket : .Pp .Bl -dash -compact -offset indent .It .Vt struct socket Fa *so_splice links from the source to the drain socket. .It .Vt struct socket Fa *so_spliceback links back from the drain to the source socket. .It .Vt off_t Fa so_splicelen counts the number of bytes spliced so far from this socket. .It .Vt off_t Fa so_splicemax specifies the maximum number of bytes to splice from this socket if non-zero. .It .Vt struct timeval Fa so_idletv specifies the maximum idle time if non-zero. .It .Vt struct timeout Fa so_idleto provides storage for the kernel timeout if idle time is used. .El .Pp After connecting both sockets, .Fn sosplice calls .Fn somove to transfer the mbufs already in the source receive buffer to the drain send buffer. Finally the socket buffer flag .Dv SB_SPLICE is set on both socket buffers, to indicate that the protocol layer has to call .Fn somove whenever data or space is available. .Pp The function .Fn somove transfers data from the source's receive buffer to the drain's send buffer. It must be called at .Xr splsoftnet 9 and .Fa so must be a spliced drain socket. It may be necessary to split an mbuf to handle out-of-band data inline or when the maximum splice length has been reached. If .Fa wait is .Dv M_WAIT , splitting mbufs will always succeed. For .Dv M_DONTWAIT the out-of-band property might get lost or a short splice might happen. In the latter case, less than the given maximum number of bytes are transferred and userland has to cope with this. Note that a short splice cannot happen if .Fn somove was called by .Fn sosplice . So a second .Xr setsockopt 2 after a short splice pointing to the same maximum will always succeed. .Pp Before transferring data, .Fn somove checks both sockets for errors and that the drain socket is connected. If the drain cannot send anymore, an .Er EPIPE error is set on the source socket. The data length to move is limited by the optional maximum splice length and the space in the drain's send socket buffer. Up to this amount of data is taken out of the source's receive socket buffer. .Pp For atomic protocols, either one complete packet is taken out, or nothing is taken at all if: the packet is bigger than the drain's send buffer size, in which case the splicing gets aborted with an .Er EMSGSIZE error; the packet does not fit into the drain's current send buffer space, in which case it is left in the source's receive buffer for later processing; or the maximum splice length is located within a packet, in which case splicing gets dissolved like a short splice. All address or control mbufs associated with the taken packet are dropped. .Pp If the maximum splice length has been reached, an mbuf may get split for non-atomic protocols. Otherwise an mbuf is either moved completely to the send buffer or left in the receive buffer for later processing. If SO_OOBINLINE is set, out-of-band data will get moved as such although this might not be reliable. The data is sent out to the drain socket via the protocol function. If that fails and the drain socket cannot send anymore, an .Er EPIPE error is set on the source socket. .Pp For packet oriented protocols .Fn somove iterates over the next packet queue. .Pp If a maximum splice length was specified and at least this amount of data has been received from the drain socket, splicing gets dissolved. In this case, an .Er EFBIG error is set on the source socket if the maximum amount of data has been transferred. Userland can process this error to distinguish the full splice from a short splice or to react to the completed maximum splice immediately. If an idle timeout was specified and no data has been transferred for that period of time, the handler .Fn soidle dissolves splicing and sets an .Er ETIMEDOUT error on the source socket. .Pp The function .Fn sounsplice is called to dissolve the socket splicing if the source socket cannot receive anymore and its receive buffer is empty; or if the drain socket cannot send anymore; or if the maximum has been reached; or if an error occurred; or if the idle timeout has fired. .Pp If the socket buffer flag .Dv SB_SPLICE is set, the functions .Fn sorwakeup and .Fn sowwakeup will call .Fn somove to trigger the transfer when new data or buffer space is available. While socket splicing is active, any .Xr read 2 from the source socket will block and the wakeup will not be delivered to the file descriptor. A read event or a socket error is signaled to userland after dissolving. .Sh RETURN VALUES .Fn sosplice returns 0 on success and otherwise the error number. .Fn somove returns 0 if socket splicing has been finished and 1 if it continues. .Sh ERRORS .Fn sosplice will succeed unless: .Bl -tag -width Er .It Bq Er EBADF The given file descriptor .Fa fd is not an active descriptor. .It Bq Er EBUSY The source or the drain socket is already spliced. .It Bq Er EINVAL The given maximum value .Fa max is negative. .It Bq Er ENOTCONN The source socket requires a connection and is neither connected nor in the process of connecting to a peer. .It Bq Er ENOTCONN The drain socket is neither connected nor in the process of connecting to a peer. .It Bq Er ENOTSOCK The given file descriptor .Fa fd is not a socket. .It Bq Er EOPNOTSUPP The source or the drain socket is a listen socket. .It Bq Er EPROTONOSUPPORT The source socket's protocol layer does not have the .Dv PR_SPLICE flag set. Only TCP and UDP socket splicing is supported. .It Bq Er EPROTONOSUPPORT The drain socket's protocol does not have the same .Fa pr_usrreq function as the source. .It Bq Er EWOULDBLOCK The source socket is non-blocking and the receive buffer is already locked. .El .Sh SEE ALSO .Xr setsockopt 2 , .Xr options 4 , .Xr timeout 9 .Sh HISTORY Socket splicing for TCP first appeared in .Ox 4.9 ; support for UDP was added in .Ox 5.3 . .Sh AUTHORS .An -nosplit The idea for socket splicing originally came from .An Markus Friedl Aq Mt markus@openbsd.org , and .An Alexander Bluhm Aq Mt bluhm@openbsd.org implemented it. .An Mike Belopuhov Aq Mt mikeb@openbsd.org added the timeout feature.