/* $OpenBSD: pms.c,v 1.2 1996/07/29 22:59:53 niklas Exp $ */ /* $NetBSD: pms.c,v 1.1 1996/04/12 01:53:06 cgd Exp $ */ /*- * Copyright (c) 1994 Charles Hannum. * Copyright (c) 1992, 1993 Erik Forsberg. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * XXXX * This is a hack. This driver should really be combined with the * keyboard driver, since they go through the same buffer and use the * same I/O ports. Frobbing the mouse and keyboard at the same time * may result in dropped characters and/or corrupted mouse events. */ #include "pms.h" #if NPMS > 1 #error Only one PS/2 style mouse may be configured into your system. #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PMS_DATA 0x60 /* offset for data port, read-write */ #define PMS_CNTRL 0x64 /* offset for control port, write-only */ #define PMS_STATUS 0x64 /* offset for status port, read-only */ #define PMS_NPORTS 8 /* status bits */ #define PMS_OBUF_FULL 0x01 #define PMS_IBUF_FULL 0x02 /* controller commands */ #define PMS_INT_ENABLE 0x47 /* enable controller interrupts */ #define PMS_INT_DISABLE 0x65 /* disable controller interrupts */ #define PMS_AUX_ENABLE 0xa8 /* enable auxiliary port */ #define PMS_AUX_DISABLE 0xa7 /* disable auxiliary port */ #define PMS_AUX_TEST 0xa9 /* test auxiliary port */ #define PMS_8042_CMD 0x65 /* mouse commands */ #define PMS_SET_SCALE11 0xe6 /* set scaling 1:1 */ #define PMS_SET_SCALE21 0xe7 /* set scaling 2:1 */ #define PMS_SET_RES 0xe8 /* set resolution */ #define PMS_GET_SCALE 0xe9 /* get scaling factor */ #define PMS_SET_STREAM 0xea /* set streaming mode */ #define PMS_SET_SAMPLE 0xf3 /* set sampling rate */ #define PMS_DEV_ENABLE 0xf4 /* mouse on */ #define PMS_DEV_DISABLE 0xf5 /* mouse off */ #define PMS_RESET 0xff /* reset */ #define PMS_CHUNK 128 /* chunk size for read */ #define PMS_BSIZE 1020 /* buffer size */ struct pms_softc { /* driver status information */ struct device sc_dev; void *sc_ih; u_char sc_state; /* mouse driver state */ #define PMS_OPEN 0x01 /* device is open */ #define PMS_ASLP 0x02 /* waiting for mouse data */ u_char sc_status; /* mouse button status */ int sc_x, sc_y; /* accumulated motion in the X,Y axis */ }; bus_chipset_tag_t pms_bc; isa_chipset_tag_t pms_ic; bus_io_handle_t pms_cntrl_ioh; #define pms_status_ioh pms_cntrl_ioh bus_io_handle_t pms_data_ioh; int pmsprobe __P((struct device *, void *, void *)); void pmsattach __P((struct device *, struct device *, void *)); int pmsintr __P((void *)); struct cfattach pms_ca = { sizeof(struct pms_softc), pmsprobe, pmsattach, }; struct cfdriver pms_cd = { NULL, "pms", DV_TTY, }; #define PMSUNIT(dev) (minor(dev)) int pms_enable __P((struct device *)); int pms_disable __P((struct device *)); struct wscons_mdev_spec pms_mdev_spec = { pms_enable, pms_disable, }; static inline void pms_flush() { u_char c; while (c = bus_io_read_1(pms_bc, pms_status_ioh, 0) & 0x03) if ((c & PMS_OBUF_FULL) == PMS_OBUF_FULL) { /* XXX - delay is needed to prevent some keyboards from wedging when the system boots */ delay(6); (void) bus_io_read_1(pms_bc, pms_data_ioh, 0); } } static inline void pms_dev_cmd(value) u_char value; { pms_flush(); bus_io_write_1(pms_bc, pms_cntrl_ioh, 0, 0xd4); pms_flush(); bus_io_write_1(pms_bc, pms_data_ioh, 0, value); } static inline void pms_aux_cmd(value) u_char value; { pms_flush(); bus_io_write_1(pms_bc, pms_cntrl_ioh, 0, value); } static inline void pms_pit_cmd(value) u_char value; { pms_flush(); bus_io_write_1(pms_bc, pms_cntrl_ioh, 0, 0x60); pms_flush(); bus_io_write_1(pms_bc, pms_data_ioh, 0, value); } int pmsprobe(parent, match, aux) struct device *parent; void *match, *aux; { struct isa_attach_args *ia = aux; u_char x; pms_bc = ia->ia_bc; if (ia->ia_iobase != 0x60) return 0; if (bus_io_map(pms_bc, PMS_DATA, 1, &pms_data_ioh) || bus_io_map(pms_bc, PMS_CNTRL, 1, &pms_cntrl_ioh)) return 0; pms_dev_cmd(PMS_RESET); pms_aux_cmd(PMS_AUX_TEST); delay(1000); x = bus_io_read_1(pms_bc, pms_data_ioh, 0); pms_pit_cmd(PMS_INT_DISABLE); if (x & 0x04) return 0; ia->ia_iosize = PMS_NPORTS; ia->ia_msize = 0; return 1; } void pmsattach(parent, self, aux) struct device *parent, *self; void *aux; { struct pms_softc *sc = (void *)self; struct isa_attach_args *ia = aux; pms_bc = ia->ia_bc; pms_ic = ia->ia_ic; if (bus_io_map(pms_bc, PMS_DATA, 1, &pms_data_ioh) || bus_io_map(pms_bc, PMS_CNTRL, 1, &pms_cntrl_ioh)) { printf(": can't map I/O ports!\n"); return; } msattach(self, &pms_mdev_spec); printf("\n"); /* Other initialization was done by pmsprobe. */ sc->sc_state = 0; sc->sc_ih = isa_intr_establish(pms_ic, ia->ia_irq, IST_EDGE, IPL_TTY, pmsintr, sc, sc->sc_dev.dv_xname); } int pms_enable(dev) struct device *dev; { struct pms_softc *sc = (struct pms_softc *)dev; if (sc->sc_state & PMS_OPEN) return EBUSY; sc->sc_state |= PMS_OPEN; sc->sc_status = 0; sc->sc_x = sc->sc_y = 0; /* Enable interrupts. */ pms_dev_cmd(PMS_DEV_ENABLE); pms_aux_cmd(PMS_AUX_ENABLE); #if 0 pms_dev_cmd(PMS_SET_RES); pms_dev_cmd(3); /* 8 counts/mm */ pms_dev_cmd(PMS_SET_SCALE21); pms_dev_cmd(PMS_SET_SAMPLE); pms_dev_cmd(100); /* 100 samples/sec */ pms_dev_cmd(PMS_SET_STREAM); #endif pms_pit_cmd(PMS_INT_ENABLE); return 0; } int pms_disable(dev) struct device *dev; { struct pms_softc *sc = (struct pms_softc *)dev; /* Disable interrupts. */ pms_dev_cmd(PMS_DEV_DISABLE); pms_pit_cmd(PMS_INT_DISABLE); pms_aux_cmd(PMS_AUX_DISABLE); sc->sc_state &= ~PMS_OPEN; return 0; } /* Masks for the first byte of a packet */ #define PS2LBUTMASK 0x01 #define PS2RBUTMASK 0x02 #define PS2MBUTMASK 0x04 int pmsintr(arg) void *arg; { struct pms_softc *sc = arg; static int state = 0; static u_char buttons; u_char changed; static char dx, dy; u_char buffer[5]; if ((sc->sc_state & PMS_OPEN) == 0) { /* Interrupts are not expected. Discard the byte. */ pms_flush(); return 0; } switch (state) { case 0: buttons = bus_io_read_1(pms_bc, pms_data_ioh, 0); if ((buttons & 0xc0) == 0) ++state; break; case 1: dx = bus_io_read_1(pms_bc, pms_data_ioh, 0); /* Bounding at -127 avoids a bug in XFree86. */ dx = (dx == -128) ? -127 : dx; ++state; break; case 2: dy = bus_io_read_1(pms_bc, pms_data_ioh, 0); dy = (dy == -128) ? -127 : dy; state = 0; buttons = ((buttons & PS2LBUTMASK) << 2) | ((buttons & (PS2RBUTMASK | PS2MBUTMASK)) >> 1); changed = (buttons ^ sc->sc_status); sc->sc_status = buttons; if (dx || dy || changed) ms_event(buttons, dx, dy); break; } return -1; }