/* $OpenBSD: cia.c,v 1.20 2003/10/18 20:14:42 jmc Exp $ */ /* $NetBSD: cia.c,v 1.56 2000/06/29 08:58:45 mrg Exp $ */ /*- * Copyright (c) 1998, 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1995, 1996 Carnegie-Mellon University. * All rights reserved. * * Author: Chris G. Demetriou * * Permission to use, copy, modify and distribute this software and * its documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DEC_KN20AA #include #endif #ifdef DEC_EB164 #include #endif #ifdef DEC_550 #include #endif #ifdef DEC_1000A #include #endif #ifdef DEC_1000 #include #endif int ciamatch(struct device *, void *, void *); void ciaattach(struct device *, struct device *, void *); struct cfattach cia_ca = { sizeof(struct cia_softc), ciamatch, ciaattach, }; struct cfdriver cia_cd = { NULL, "cia", DV_DULL, }; static int ciaprint(void *, const char *pnp); /* There can be only one. */ int ciafound; struct cia_config cia_configuration; /* * This determines if we attempt to use BWX for PCI bus and config space * access. Some systems, notably with Pyxis, don't fare so well unless * BWX is used. * * EXCEPT! Some devices have a really hard time if BWX is used (WHY?!). * So, we decouple the uses for PCI config space and PCI bus space. * * FURTHERMORE! The Pyxis, most notably earlier revs, really don't * do so well if you don't use BWX for bus access. So we default to * forcing BWX on those chips. * * Geez. */ #ifndef CIA_PCI_USE_BWX #define CIA_PCI_USE_BWX 1 #endif #ifndef CIA_BUS_USE_BWX #define CIA_BUS_USE_BWX 1 #endif #ifndef CIA_PYXIS_FORCE_BWX #define CIA_PYXIS_FORCE_BWX 1 #endif int cia_pci_use_bwx = CIA_PCI_USE_BWX; int cia_bus_use_bwx = CIA_BUS_USE_BWX; int cia_pyxis_force_bwx = CIA_PYXIS_FORCE_BWX; int ciamatch(parent, match, aux) struct device *parent; void *match; void *aux; { struct mainbus_attach_args *ma = aux; /* Make sure that we're looking for a CIA. */ if (strcmp(ma->ma_name, cia_cd.cd_name) != 0) return (0); if (ciafound) return (0); return (1); } /* * Set up the chipset's function pointers. */ void cia_init(ccp, mallocsafe) struct cia_config *ccp; int mallocsafe; { int pci_use_bwx = cia_pci_use_bwx; int bus_use_bwx = cia_bus_use_bwx; ccp->cc_hae_mem = REGVAL(CIA_CSR_HAE_MEM); ccp->cc_hae_io = REGVAL(CIA_CSR_HAE_IO); ccp->cc_rev = REGVAL(CIA_CSR_REV) & REV_MASK; /* * Determine if we have a Pyxis. Only two systypes can * have this: the EB164 systype (AlphaPC164LX and AlphaPC164SX) * and the DEC_550 systype (Miata). */ if ((cputype == ST_EB164 && (hwrpb->rpb_variation & SV_ST_MASK) >= SV_ST_ALPHAPC164LX_400) || cputype == ST_DEC_550) { ccp->cc_flags |= CCF_ISPYXIS; if (cia_pyxis_force_bwx) pci_use_bwx = bus_use_bwx = 1; } /* * ALCOR/ALCOR2 Revisions >= 2 and Pyxis have the CNFG register. */ if (ccp->cc_rev >= 2 || (ccp->cc_flags & CCF_ISPYXIS) != 0) ccp->cc_cnfg = REGVAL(CIA_CSR_CNFG); else ccp->cc_cnfg = 0; /* * Use BWX iff: * * - It hasn't been disabled by the user, * - it's enabled in CNFG, * - we're implementation version ev5, * - BWX is enabled in the CPU's capabilities mask (yes, * the bit is really cleared if the capability exists...) */ if ((pci_use_bwx || bus_use_bwx) && (ccp->cc_cnfg & CNFG_BWEN) != 0 && (cpu_amask & ALPHA_AMASK_BWX) != 0) { u_int32_t ctrl; if (pci_use_bwx) ccp->cc_flags |= CCF_PCI_USE_BWX; if (bus_use_bwx) ccp->cc_flags |= CCF_BUS_USE_BWX; /* * For whatever reason, the firmware seems to enable PCI * loopback mode if it also enables BWX. Make sure it's * enabled if we have an old, buggy firmware rev. */ alpha_mb(); ctrl = REGVAL(CIA_CSR_CTRL); if ((ctrl & CTRL_PCI_LOOP_EN) == 0) { REGVAL(CIA_CSR_CTRL) = ctrl | CTRL_PCI_LOOP_EN; alpha_mb(); } } if (!ccp->cc_initted) { /* don't do these twice since they set up extents */ if (ccp->cc_flags & CCF_BUS_USE_BWX) { cia_bwx_bus_io_init(&ccp->cc_iot, ccp); cia_bwx_bus_mem_init(&ccp->cc_memt, ccp); } else { cia_bus_io_init(&ccp->cc_iot, ccp); cia_bus_mem_init(&ccp->cc_memt, ccp); } } ccp->cc_mallocsafe = mallocsafe; cia_pci_init(&ccp->cc_pc, ccp); alpha_pci_chipset = &ccp->cc_pc; alpha_pci_chipset->pc_name = "cia"; alpha_pci_chipset->pc_dense = CIA_PCI_DENSE; alpha_pci_chipset->pc_hae_mask = 7L << 29; if (ccp->cc_flags & CCF_BUS_USE_BWX) { alpha_pci_chipset->pc_mem = CIA_EV56_BWMEM; alpha_pci_chipset->pc_ports = CIA_EV56_BWIO; alpha_pci_chipset->pc_bwx = 1; } else { alpha_pci_chipset->pc_mem = CIA_PCI_SMEM1; alpha_pci_chipset->pc_ports = CIA_PCI_SIO1; alpha_pci_chipset->pc_bwx = 0; } ccp->cc_initted = 1; } void ciaattach(parent, self, aux) struct device *parent, *self; void *aux; { struct cia_softc *sc = (struct cia_softc *)self; struct cia_config *ccp; struct pcibus_attach_args pba; const char *name; int pass; /* note that we've attached the chipset; can't have 2 CIAs. */ ciafound = 1; /* * set up the chipset's info; done once at console init time * (maybe), but we must do it here as well to take care of things * that need to use memory allocation. */ ccp = sc->sc_ccp = &cia_configuration; cia_init(ccp, 1); if (ccp->cc_flags & CCF_ISPYXIS) { name = "Pyxis"; pass = ccp->cc_rev; } else { name = "ALCOR/ALCOR2"; pass = ccp->cc_rev + 1; } printf(": DECchip 2117x Core Logic Chipset (%s), pass %d\n", name, pass); if (ccp->cc_cnfg) printf("%s: extended capabilities: %b\n", self->dv_xname, ccp->cc_cnfg, CIA_CSR_CNFG_BITS); switch (ccp->cc_flags & (CCF_PCI_USE_BWX|CCF_BUS_USE_BWX)) { case CCF_PCI_USE_BWX|CCF_BUS_USE_BWX: name = "PCI config and bus"; break; case CCF_PCI_USE_BWX: name = "PCI config"; break; case CCF_BUS_USE_BWX: name = "bus"; break; default: name = NULL; break; } if (name != NULL) printf("%s: using BWX for %s access\n", self->dv_xname, name); #ifdef DEC_550 if (cputype == ST_DEC_550 && (hwrpb->rpb_variation & SV_ST_MASK) < SV_ST_MIATA_1_5) { /* * Miata 1 systems have a bug: DMA cannot cross * an 8k boundary! Make sure PCI read prefetching * is disabled on these chips. Note that secondary * PCI busses don't have this problem, because of * the way PPBs handle PCI read requests. * * In the 21174 Technical Reference Manual, this is * actually documented as "Pyxis Pass 1", but apparently * there are chips that report themselves as "Pass 1" * which do not have the bug! Miatas with the Cypress * PCI-ISA bridge (i.e. Miata 1.5 and Miata 2) do not * have the bug, so we use this check. * * NOTE: This bug is actually worked around in cia_dma.c, * when direct-mapped DMA maps are created. * * XXX WE NEED TO THINK ABOUT HOW TO HANDLE THIS FOR * XXX SGMAP DMA MAPPINGS! */ u_int32_t ctrl; /* XXX no bets... */ printf("%s: WARNING: Pyxis pass 1 DMA bug; no bets...\n", self->dv_xname); ccp->cc_flags |= CCF_PYXISBUG; alpha_mb(); ctrl = REGVAL(CIA_CSR_CTRL); ctrl &= ~(CTRL_RD_TYPE|CTRL_RL_TYPE|CTRL_RM_TYPE); REGVAL(CIA_CSR_CTRL) = ctrl; alpha_mb(); } #endif /* DEC_550 */ cia_dma_init(ccp); switch (cputype) { #ifdef DEC_KN20AA case ST_DEC_KN20AA: pci_kn20aa_pickintr(ccp); break; #endif #ifdef DEC_EB164 case ST_EB164: pci_eb164_pickintr(ccp); break; #endif #ifdef DEC_550 case ST_DEC_550: pci_550_pickintr(ccp); break; #endif #ifdef DEC_1000A case ST_DEC_1000A: pci_1000a_pickintr(ccp, &ccp->cc_iot, &ccp->cc_memt, &ccp->cc_pc); break; #endif #ifdef DEC_1000 case ST_DEC_1000: pci_1000_pickintr(ccp, &ccp->cc_iot, &ccp->cc_memt, &ccp->cc_pc); break; #endif default: panic("ciaattach: shouldn't be here, really..."); } pba.pba_busname = "pci"; pba.pba_iot = &ccp->cc_iot; pba.pba_memt = &ccp->cc_memt; pba.pba_dmat = alphabus_dma_get_tag(&ccp->cc_dmat_direct, ALPHA_BUS_PCI); pba.pba_pc = &ccp->cc_pc; pba.pba_bus = 0; #ifdef notyet pba.pba_flags = PCI_FLAGS_IO_ENABLED | PCI_FLAGS_MEM_ENABLED; if ((ccp->cc_flags & CCF_PYXISBUG) == 0) pba.pba_flags |= PCI_FLAGS_MRL_OKAY | PCI_FLAGS_MRM_OKAY | PCI_FLAGS_MWI_OKAY; #endif config_found(self, &pba, ciaprint); } static int ciaprint(aux, pnp) void *aux; const char *pnp; { register struct pcibus_attach_args *pba = aux; /* only PCIs can attach to CIAs; easy. */ if (pnp) printf("%s at %s", pba->pba_busname, pnp); printf(" bus %d", pba->pba_bus); return (UNCONF); } void cia_pyxis_intr_enable(irq, onoff) int irq, onoff; { u_int64_t imask; int s; #if 0 printf("cia_pyxis_intr_enable: %s %d\n", onoff ? "enabling" : "disabling", irq); #endif s = splhigh(); alpha_mb(); imask = REGVAL64(PYXIS_INT_MASK); if (onoff) imask |= (1UL << irq); else imask &= ~(1UL << irq); REGVAL64(PYXIS_INT_MASK) = imask; alpha_mb(); splx(s); }