/* $OpenBSD: sio_pic.c,v 1.9 1997/01/24 19:57:59 niklas Exp $ */ /* $NetBSD: sio_pic.c,v 1.16 1996/11/17 02:05:26 cgd Exp $ */ /* * Copyright (c) 1995, 1996 Carnegie-Mellon University. * All rights reserved. * * Author: Chris G. Demetriou * * Permission to use, copy, modify and distribute this software and * its documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. */ #include #include #include #include #include #include #include #include #include #include #ifndef EVCNT_COUNTERS #include #endif #include "sio.h" /* * To add to the long history of wonderful PROM console traits, * AlphaStation PROMs don't reset themselves completely on boot! * Therefore, if an interrupt was turned on when the kernel was * started, we're not going to EVER turn it off... I don't know * what will happen if new interrupts (that the PROM console doesn't * want) are turned on. I'll burn that bridge when I come to it. */ #define BROKEN_PROM_CONSOLE /* * Private functions and variables. */ bus_space_tag_t sio_iot; bus_space_handle_t sio_ioh_icu1, sio_ioh_icu2, sio_ioh_elcr; #define ICU_LEN 16 /* number of ISA IRQs */ static struct alpha_shared_intr *sio_intr; #ifdef EVCNT_COUNTERS struct evcnt sio_intr_evcnt; #endif #ifndef STRAY_MAX #ifdef BROKEN_PROM_CONSOLE /* * If prom console is broken, because initial interrupt settings * must be kept, there's no way to escape stray interrupts. */ #define STRAY_MAX 0 #else #define STRAY_MAX 5 #endif #endif #ifdef BROKEN_PROM_CONSOLE /* * If prom console is broken, must remember the initial interrupt * settings and enforce them. WHEE! */ u_int8_t initial_ocw1[2]; u_int8_t initial_elcr[2]; #define INITIALLY_ENABLED(irq) \ ((initial_ocw1[(irq) / 8] & (1 << ((irq) % 8))) == 0) #define INITIALLY_LEVEL_TRIGGERED(irq) \ ((initial_elcr[(irq) / 8] & (1 << ((irq) % 8))) != 0) #else #define INITIALLY_ENABLED(irq) ((irq) == 2 ? 1 : 0) #define INITIALLY_LEVEL_TRIGGERED(irq) 0 #endif void sio_setirqstat __P((int, int, int)); void sio_setirqstat __P((int, int, int)); void sio_setirqstat(irq, enabled, type) int irq, enabled; int type; { u_int8_t ocw1[2], elcr[2]; int icu, bit; #if 0 printf("sio_setirqstat: irq %d: %s, %s\n", irq, enabled ? "enabled" : "disabled", isa_intr_typename(type)); #endif icu = irq / 8; bit = irq % 8; ocw1[0] = bus_space_read_1(sio_iot, sio_ioh_icu1, 1); ocw1[1] = bus_space_read_1(sio_iot, sio_ioh_icu2, 1); elcr[0] = bus_space_read_1(sio_iot, sio_ioh_elcr, 0); /* XXX */ elcr[1] = bus_space_read_1(sio_iot, sio_ioh_elcr, 1); /* XXX */ /* * interrupt enable: set bit to mask (disable) interrupt. */ if (enabled) ocw1[icu] &= ~(1 << bit); else ocw1[icu] |= 1 << bit; /* * interrupt type select: set bit to get level-triggered. */ if (type == IST_LEVEL) elcr[icu] |= 1 << bit; else elcr[icu] &= ~(1 << bit); #ifdef not_here /* see the init function... */ ocw1[0] &= ~0x04; /* always enable IRQ2 on first PIC */ elcr[0] &= ~0x07; /* IRQ[0-2] must be edge-triggered */ elcr[1] &= ~0x21; /* IRQ[13,8] must be edge-triggered */ #endif #ifdef BROKEN_PROM_CONSOLE /* * make sure that the initially clear bits (unmasked interrupts) * are never set, and that the initially-level-triggered * intrrupts always remain level-triggered, to keep the prom happy. */ if ((ocw1[0] & ~initial_ocw1[0]) != 0 || (ocw1[1] & ~initial_ocw1[1]) != 0 || (elcr[0] & initial_elcr[0]) != initial_elcr[0] || (elcr[1] & initial_elcr[1]) != initial_elcr[1]) { printf("sio_sis: initial: ocw = (%2x,%2x), elcr = (%2x,%2x)\n", initial_ocw1[0], initial_ocw1[1], initial_elcr[0], initial_elcr[1]); printf(" current: ocw = (%2x,%2x), elcr = (%2x,%2x)\n", ocw1[0], ocw1[1], elcr[0], elcr[1]); panic("sio_setirqstat: hosed"); } #endif bus_space_write_1(sio_iot, sio_ioh_icu1, 1, ocw1[0]); bus_space_write_1(sio_iot, sio_ioh_icu2, 1, ocw1[1]); bus_space_write_1(sio_iot, sio_ioh_elcr, 0, elcr[0]); /* XXX */ bus_space_write_1(sio_iot, sio_ioh_elcr, 1, elcr[1]); /* XXX */ } void sio_intr_setup(iot) bus_space_tag_t iot; { int i; sio_iot = iot; if (bus_space_map(sio_iot, IO_ICU1, IO_ICUSIZE, 0, &sio_ioh_icu1) || bus_space_map(sio_iot, IO_ICU2, IO_ICUSIZE, 0, &sio_ioh_icu2) || bus_space_map(sio_iot, 0x4d0, 2, 0, &sio_ioh_elcr)) panic("sio_intr_setup: can't map I/O ports"); #ifdef BROKEN_PROM_CONSOLE /* * Remember the initial values, because the prom is stupid. */ initial_ocw1[0] = bus_space_read_1(sio_iot, sio_ioh_icu1, 1); initial_ocw1[1] = bus_space_read_1(sio_iot, sio_ioh_icu2, 1); initial_elcr[0] = bus_space_read_1(sio_iot, sio_ioh_elcr, 0); /* XXX */ initial_elcr[1] = bus_space_read_1(sio_iot, sio_ioh_elcr, 1); /* XXX */ #if 0 printf("initial_ocw1[0] = 0x%x\n", initial_ocw1[0]); printf("initial_ocw1[1] = 0x%x\n", initial_ocw1[1]); printf("initial_elcr[0] = 0x%x\n", initial_elcr[0]); printf("initial_elcr[1] = 0x%x\n", initial_elcr[1]); #endif #endif sio_intr = alpha_shared_intr_alloc(ICU_LEN); /* * set up initial values for interrupt enables. */ for (i = 0; i < ICU_LEN; i++) { alpha_shared_intr_set_maxstrays(sio_intr, i, STRAY_MAX); switch (i) { case 0: case 1: case 8: case 13: /* * IRQs 0, 1, 8, and 13 must always be * edge-triggered. */ if (INITIALLY_LEVEL_TRIGGERED(i)) printf("sio_intr_setup: %d LT!\n", i); sio_setirqstat(i, INITIALLY_ENABLED(i), IST_EDGE); alpha_shared_intr_set_dfltsharetype(sio_intr, i, IST_EDGE); break; case 2: /* * IRQ 2 must be edge-triggered, and should be * enabled (otherwise IRQs 8-15 are ignored). */ if (INITIALLY_LEVEL_TRIGGERED(i)) printf("sio_intr_setup: %d LT!\n", i); if (!INITIALLY_ENABLED(i)) printf("sio_intr_setup: %d not enabled!\n", i); sio_setirqstat(i, 1, IST_EDGE); alpha_shared_intr_set_dfltsharetype(sio_intr, i, IST_UNUSABLE); break; default: /* * Otherwise, disable the IRQ and set its * type to (effectively) "unknown." */ sio_setirqstat(i, INITIALLY_ENABLED(i), INITIALLY_LEVEL_TRIGGERED(i) ? IST_LEVEL : IST_NONE); alpha_shared_intr_set_dfltsharetype(sio_intr, i, INITIALLY_LEVEL_TRIGGERED(i) ? IST_LEVEL : IST_NONE); break; } } } const char * sio_intr_string(v, irq) void *v; int irq; { static char irqstr[12]; /* 8 + 2 + NULL + sanity */ if (irq == 0 || irq >= ICU_LEN || irq == 2) panic("sio_intr_string: bogus isa irq 0x%x\n", irq); sprintf(irqstr, "isa irq %d", irq); return (irqstr); } void * sio_intr_establish(v, irq, type, level, fn, arg, name) void *v, *arg; int irq; int type; int level; int (*fn)(void *); char *name; { void *cookie; if (irq > ICU_LEN || type == IST_NONE) panic("sio_intr_establish: bogus irq or type"); cookie = alpha_shared_intr_establish(sio_intr, irq, type, level, fn, arg, name); if (cookie) sio_setirqstat(irq, alpha_shared_intr_isactive(sio_intr, irq), alpha_shared_intr_get_sharetype(sio_intr, irq)); return (cookie); } void sio_intr_disestablish(v, cookie) void *v; void *cookie; { printf("sio_intr_disestablish(%p)\n", cookie); /* XXX */ /* XXX NEVER ALLOW AN INITIALLY-ENABLED INTERRUPT TO BE DISABLED */ /* XXX NEVER ALLOW AN INITIALLY-LT INTERRUPT TO BECOME UNTYPED */ } void sio_iointr(framep, vec) void *framep; unsigned long vec; { int irq; irq = (vec - 0x800) >> 4; #ifdef DIAGNOSTIC if (irq > ICU_LEN || irq < 0) panic("sio_iointr: irq out of range (%d)", irq); #endif #ifdef EVCNT_COUNTERS sio_intr_evcnt.ev_count++; #else #ifdef DEBUG if (ICU_LEN != INTRCNT_ISA_IRQ_LEN) panic("sio interrupt counter sizes inconsistent"); #endif intrcnt[INTRCNT_ISA_IRQ + irq]++; #endif if (!alpha_shared_intr_dispatch(sio_intr, irq)) alpha_shared_intr_stray(sio_intr, irq, "isa irq"); /* * Some versions of the machines which use the SIO * (or is it some PALcode revisions on those machines?) * require the non-specific EOI to be fed to the PIC(s) * by the interrupt handler. */ if (irq > 7) bus_space_write_1(sio_iot, sio_ioh_icu2, 0, 0x20 | (irq & 0x07)); /* XXX */ bus_space_write_1(sio_iot, sio_ioh_icu1, 0, 0x20 | (irq > 7 ? 2 : irq)); /* XXX */ }