.\" $OpenBSD: installboot.8,v 1.8 2003/06/06 21:45:33 jmc Exp $ .\" $NetBSD: installboot.8,v 1.2 1997/04/06 08:41:11 cgd Exp $ .\" .\" Copyright (c) 1996, 1997 Christopher G. Demetriou. All rights reserved. .\" Copyright (c) 1995 Paul Kranenburg .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Paul Kranenburg. .\" 3. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .Dd January 16, 1997 .Dt INSTALLBOOT 8 alpha .Os .Sh NAME .Nm installboot .Nd install disk bootstrap software .Sh SYNOPSIS .Nm installboot .Op Fl nv .Ar boot .Ar bootxx .Ar rawdiskdevice .Sh DESCRIPTION The .Nm installboot utility prepares a disk for bootstrapping. .Pp The OpenBSD/alpha disk bootstrap software is split into two parts: a small first-stage boot program that is written into the disklabel area of a disk .Po and hence is limited in size to 7680 bytes .Pc , and a second-stage boot program that resides in the filesystem proper .Po typically with the name .Pa /boot .Pc . The first-stage boot program is loaded into memory by the SRM console software. After receiving control of the system, it loads the second-stage boot program from a set of filesystem block numbers that have been hard-coded into it by .Nm installboot . The second-stage boot program locates and loads the kernel. .Pp The second-stage boot program and the prototype code for the first-stage boot program can be found in .Pa /usr/mdec/boot and .Pa /usr/mdec/bootxx , respectively. .Pa /usr/mdec/boot may be installed simply by copying it to the root directory of the partition you wish to boot from, but after it is installed .Nm installboot .Em must be run. .Pp The options recognized by .Nm installboot are as follows: .Bl -tag -width flag .It Fl n Do not actually write anything on the disk. .It Fl v Verbose mode. .El .Pp The arguments are: .Bl -tag -width rawdiskdevice .It Ar boot The name of the second-stage boot program in the file system where the first-stage boot program is to be installed. .It Ar bootxx The name of the prototype file for the first-stage boot program. .It Ar rawdiskdevice The name of the device corresponding to the raw whole-disk partition (the .Dq raw partition ) of the disk on which the first-stage boot program is to be installed. .El .Sh EXAMPLES .Pa boot resides in the FFS file system mounted on .Pa / from .Dq sd0a , you would install the first-stage boot program on the disk (and therefore make the disk bootable) by using the command: .Bd -literal -offset indent installboot /boot /usr/mdec/bootxx /dev/rsd0c .Ed .Sh SEE ALSO .Xr disklabel 8 , .Xr init 8 , .Xr sysctl 8 .Sh HISTORY The alpha .Nm command first appeared in .Nx 1.2 . .Sh BUGS The OpenBSD/alpha boot blocks can only load kernels from disks' .Dq a partitions. (However, the second-stage boot program may be located on any FFS file system partition on the disk.) .Pp .Nm Installboot requires simultaneous access to the mounted file system and the disks' raw partition. That is not allowed with the kernel .Dv securelevel variable .Po see .Xr sysctl 8 .Pc set to a value greater than one, or with .Dv securelevel set to one if the .Dq boot program resides in a file system on the disk's raw partition.