/* $OpenBSD: ascvar.h,v 1.1 2000/07/05 21:50:38 ericj Exp $ */ /* $NetBSD: espvar.h,v 1.12 1996/11/24 04:21:30 cgd Exp $ */ #if defined(__sparc__) && !defined(SPARC_DRIVER) #define SPARC_DRIVER #endif /* * Copyright (c) 1994 Peter Galbavy. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Peter Galbavy. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #define ESP_DEBUG 0 #define ESP_ABORT_TIMEOUT 2000 /* time to wait for abort */ #define FREQTOCCF(freq) (((freq + 4) / 5)) /* esp revisions */ #define ESP100 0x01 #define ESP100A 0x02 #define ESP200 0x03 #define NCR53C94 0x04 /* * ECB. Holds additional information for each SCSI command Comments: We * need a separate scsi command block because we may need to overwrite it * with a request sense command. Basicly, we refrain from fiddling with * the scsi_xfer struct (except do the expected updating of return values). * We'll generally update: xs->{flags,resid,error,sense,status} and * occasionally xs->retries. */ struct esp_ecb { TAILQ_ENTRY(esp_ecb) chain; struct scsi_xfer *xs; /* SCSI xfer ctrl block from above */ int flags; #define ECB_ALLOC 0x01 #define ECB_NEXUS 0x02 #define ECB_SENSE 0x04 #define ECB_ABORT 0x40 #define ECB_RESET 0x80 int timeout; struct scsi_generic cmd; /* SCSI command block */ int clen; char *daddr; /* Saved data pointer */ int dleft; /* Residue */ u_char stat; /* SCSI status byte */ #if ESP_DEBUG > 0 char trace[1000]; #endif }; #if ESP_DEBUG > 0 #define ECB_TRACE(ecb, msg, a, b) do { \ const char *f = "[" msg "]"; \ int n = strlen((ecb)->trace); \ if (n < (sizeof((ecb)->trace)-100)) \ sprintf((ecb)->trace + n, f, a, b); \ } while(0) #else #define ECB_TRACE(ecb, msg, a, b) #endif /* * Some info about each (possible) target on the SCSI bus. This should * probably have been a "per target+lunit" structure, but we'll leave it at * this for now. Is there a way to reliably hook it up to sc->fordriver?? */ struct esp_tinfo { int cmds; /* #commands processed */ int dconns; /* #disconnects */ int touts; /* #timeouts */ int perrs; /* #parity errors */ int senses; /* #request sense commands sent */ ushort lubusy; /* What local units/subr. are busy? */ u_char flags; #define T_NEED_TO_RESET 0x01 /* Should send a BUS_DEV_RESET */ #define T_NEGOTIATE 0x02 /* (Re)Negotiate synchronous options */ #define T_BUSY 0x04 /* Target is busy, i.e. cmd in progress */ #define T_SYNCMODE 0x08 /* sync mode has been negotiated */ #define T_SYNCHOFF 0x10 /* .. */ #define T_RSELECTOFF 0x20 /* .. */ u_char period; /* Period suggestion */ u_char offset; /* Offset suggestion */ } tinfo_t; /* Register a linenumber (for debugging) */ #define LOGLINE(p) #define ESP_SHOWECBS 0x01 #define ESP_SHOWINTS 0x02 #define ESP_SHOWCMDS 0x04 #define ESP_SHOWMISC 0x08 #define ESP_SHOWTRAC 0x10 #define ESP_SHOWSTART 0x20 #define ESP_SHOWPHASE 0x40 #define ESP_SHOWDMA 0x80 #define ESP_SHOWCCMDS 0x100 #define ESP_SHOWMSGS 0x200 #ifdef ESP_DEBUG extern int esp_debug; #define ESP_ECBS(str) do {if (esp_debug & ESP_SHOWECBS) printf str;} while (0) #define ESP_MISC(str) do {if (esp_debug & ESP_SHOWMISC) printf str;} while (0) #define ESP_INTS(str) do {if (esp_debug & ESP_SHOWINTS) printf str;} while (0) #define ESP_TRACE(str) do {if (esp_debug & ESP_SHOWTRAC) printf str;} while (0) #define ESP_CMDS(str) do {if (esp_debug & ESP_SHOWCMDS) printf str;} while (0) #define ESP_START(str) do {if (esp_debug & ESP_SHOWSTART) printf str;}while (0) #define ESP_PHASE(str) do {if (esp_debug & ESP_SHOWPHASE) printf str;}while (0) #define ESP_DMA(str) do {if (esp_debug & ESP_SHOWDMA) printf str;}while (0) #define ESP_MSGS(str) do {if (esp_debug & ESP_SHOWMSGS) printf str;}while (0) #else #define ESP_ECBS(str) #define ESP_MISC(str) #define ESP_INTS(str) #define ESP_TRACE(str) #define ESP_CMDS(str) #define ESP_START(str) #define ESP_PHASE(str) #define ESP_DMA(str) #define ESP_MSGS(str) #endif #define ESP_MAX_MSG_LEN 8 struct esp_softc { struct device sc_dev; /* us as a device */ #ifdef SPARC_DRIVER struct sbusdev sc_sd; /* sbus device */ struct intrhand sc_ih; /* intr handler */ #endif struct evcnt sc_intrcnt; /* intr count */ struct scsi_link sc_link; /* scsi lint struct */ #ifdef SPARC_DRIVER volatile u_char *sc_reg; /* the registers */ struct dma_softc *sc_dma; /* pointer to my dma */ #else volatile u_int32_t *sc_reg; /* the registers */ struct tcds_slotconfig *sc_dma; /* DMA/slot info lives here. */ void *sc_cookie; /* intr. handling cookie */ #endif /* register defaults */ u_char sc_cfg1; /* Config 1 */ u_char sc_cfg2; /* Config 2, not ESP100 */ u_char sc_cfg3; /* Config 3, only ESP200 */ u_char sc_ccf; /* Clock Conversion */ u_char sc_timeout; /* register copies, see espreadregs() */ u_char sc_espintr; u_char sc_espstat; u_char sc_espstep; u_char sc_espfflags; /* Lists of command blocks */ TAILQ_HEAD(ecb_list, esp_ecb) free_list, ready_list, nexus_list; struct esp_ecb *sc_nexus; /* current command */ struct esp_ecb sc_ecb[3*8]; /* three per target */ struct esp_tinfo sc_tinfo[8]; /* Data about the current nexus (updated for every cmd switch) */ caddr_t sc_dp; /* Current data pointer */ ssize_t sc_dleft; /* Data left to transfer */ /* Adapter state */ int sc_phase; /* Copy of what bus phase we are in */ int sc_prevphase; /* Copy of what bus phase we were in */ u_char sc_state; /* State applicable to the adapter */ u_char sc_flags; u_char sc_selid; u_char sc_lastcmd; /* Message stuff */ u_char sc_msgpriq; /* One or more messages to send (encoded) */ u_char sc_msgout; /* What message is on its way out? */ u_char sc_msgoutq; /* What messages have been sent so far? */ u_char sc_omess[ESP_MAX_MSG_LEN]; caddr_t sc_omp; /* Message pointer (for multibyte messages) */ size_t sc_omlen; u_char sc_imess[ESP_MAX_MSG_LEN + 1]; caddr_t sc_imp; /* Message pointer (for multibyte messages) */ size_t sc_imlen; /* hardware/openprom stuff */ int sc_node; /* PROM node ID */ int sc_freq; /* Freq in HZ */ #ifdef SPARC_DRIVER int sc_pri; /* SBUS priority */ #endif int sc_id; /* our scsi id */ int sc_rev; /* esp revision */ int sc_minsync; /* minimum sync period / 4 */ int sc_maxxfer; /* maximum transfer size */ }; /* values for sc_state */ #define ESP_IDLE 1 /* waiting for something to do */ #define ESP_SELECTING 2 /* SCSI command is arbiting */ #define ESP_RESELECTED 3 /* Has been reselected */ #define ESP_CONNECTED 4 /* Actively using the SCSI bus */ #define ESP_DISCONNECT 5 /* MSG_DISCONNECT received */ #define ESP_CMDCOMPLETE 6 /* MSG_CMDCOMPLETE received */ #define ESP_CLEANING 7 #define ESP_SBR 8 /* Expect a SCSI RST because we commanded it */ /* values for sc_flags */ #define ESP_DROP_MSGI 0x01 /* Discard all msgs (parity err detected) */ #define ESP_ABORTING 0x02 /* Bailing out */ #define ESP_DOINGDMA 0x04 /* The FIFO data path is active! */ #define ESP_SYNCHNEGO 0x08 /* Synch negotiation in progress. */ #define ESP_ICCS 0x10 /* Expect status phase results */ #define ESP_WAITI 0x20 /* Waiting for non-DMA data to arrive */ #define ESP_ATN 0x40 /* ATN asserted */ /* values for sc_msgout */ #define SEND_DEV_RESET 0x01 #define SEND_PARITY_ERROR 0x02 #define SEND_INIT_DET_ERR 0x04 #define SEND_REJECT 0x08 #define SEND_IDENTIFY 0x10 #define SEND_ABORT 0x20 #define SEND_SDTR 0x40 #define SEND_WDTR 0x80 /* SCSI Status codes */ #define ST_MASK 0x3e /* bit 0,6,7 is reserved */ /* phase bits */ #define IOI 0x01 #define CDI 0x02 #define MSGI 0x04 /* Information transfer phases */ #define DATA_OUT_PHASE (0) #define DATA_IN_PHASE (IOI) #define COMMAND_PHASE (CDI) #define STATUS_PHASE (CDI|IOI) #define MESSAGE_OUT_PHASE (MSGI|CDI) #define MESSAGE_IN_PHASE (MSGI|CDI|IOI) #define PHASE_MASK (MSGI|CDI|IOI) /* Some pseudo phases for getphase()*/ #define BUSFREE_PHASE 0x100 /* Re/Selection no longer valid */ #define INVALID_PHASE 0x101 /* Re/Selection valid, but no REQ yet */ #define PSEUDO_PHASE 0x100 /* "pseudo" bit */ /* * Macros to read and write the chip's registers. */ #ifdef SPARC_DRIVER #define ESP_READ_REG(sc, reg) \ ((sc)->sc_reg[(reg) * 4]) #define ESP_WRITE_REG(sc, reg, val) \ do { \ u_char v = (val); \ (sc)->sc_reg[(reg) * 4] = v; \ } while (0) #else /* ! SPARC_DRIVER */ #if 1 static __inline u_char ESP_READ_REG __P((struct esp_softc *, int)); static __inline u_char ESP_READ_REG(sc, reg) struct esp_softc *sc; int reg; { u_char v; v = sc->sc_reg[reg * 2] & 0xff; alpha_mb(); return v; } #else #define ESP_READ_REG(sc, reg) \ ((u_char)((sc)->sc_reg[(reg) * 2] & 0xff)) #endif #define ESP_WRITE_REG(sc, reg, val) \ do { \ u_char v = (val); \ (sc)->sc_reg[(reg) * 2] = v; \ alpha_mb(); \ } while (0) #endif /* SPARC_DRIVER */ #ifdef ESP_DEBUG #define ESPCMD(sc, cmd) do { \ if (esp_debug & ESP_SHOWCCMDS) \ printf("", (unsigned)cmd); \ sc->sc_lastcmd = cmd; \ ESP_WRITE_REG(sc, ESP_CMD, cmd); \ } while (0) #else #define ESPCMD(sc, cmd) ESP_WRITE_REG(sc, ESP_CMD, cmd) #endif #define SAME_ESP(sc, bp, ca) \ ((bp->val[0] == ca->ca_slot && bp->val[1] == ca->ca_offset) || \ (bp->val[0] == -1 && bp->val[1] == sc->sc_dev.dv_unit)) #ifndef SPARC_DRIVER /* DMA macros for ESP */ #define DMA_ISINTR(sc) tcds_dma_isintr(sc) #define DMA_RESET(sc) tcds_dma_reset(sc) #define DMA_INTR(sc) tcds_dma_intr(sc) #define DMA_SETUP(sc, addr, len, datain, dmasize) \ tcds_dma_setup(sc, addr, len, datain, dmasize) #define DMA_GO(sc) tcds_dma_go(sc) #define DMA_ISACTIVE(sc) tcds_dma_isactive(sc) #endif