#	$OpenBSD: RAMDISK,v 1.6 1999/09/09 21:27:36 espie Exp $

#
# A ramdisk kernel
#

include "arch/amiga/conf/std.amiga"
include "conf/GENERIC"

maxusers	4

#
# mainboards to support (in addition to Amiga)
#
option		DRACO

#
# processors this kernel should support
#
option		"M68060"	# support for 060
option		"M060SP"	# ...and MC68060 support package
option		"M68040"	# support for 040
option		FPSP		# MC68040 floating point support
option		"M68030"	# support for 030
option		"M68020"	# support for 020/851
option		FPU_EMULATE	# FPU emulation

#
# File systems
#
option		ADOSFS		# AmigaDOS file system

#
# Compatability options for various existing systems
#
#option		COMPAT_SUNOS	# Support to run Sun (m68k) executables
#option		COMPAT_HPUX	# HP300 compatability

#
# Support for various kernel options
#

option		"NKMEMCLUSTERS=256"	# Size of kernel malloc area

#
# Misc. debuging options
#
#option		DEBUG		# Add debugging statements
#option		SYSCALL_DEBUG	# debug all syscalls.
#option		SCSIDEBUG	# Add SCSI debugging statements
#option		PANICBUTTON	# Forced crash via keypress (???)

#
# Amiga specific options
#
option		MACHINE_NONCONTIG # Non-contiguous memory support
# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
# before the 10 secondinterval ends, or that KBDRESET does work at all.
#option		KBDRESET	# sync on Ctrl-Amiga-Amiga

# These options improve performance with the built-in serial port
# on slower Amigas.  Try the larger buffers first then lev6_defer.
#option		"SERIBUF_SIZE=4096"
#option		"SEROBUF_SIZE=32"
#option		LEV6_DEFER	# defers l6 to l4 (below serial l5)
option		IPL_REMAP_1	# use remapping interruptsystem version 1
#option		IPL_REMAP_2	# and version 2 (not yet done)

option		RETINACONSOLE	# enable code to allow retina to be console
option		ULOWELLCONSOLE	# enable code to allow a2410 to be console
option		CL5426CONSOLE	# Cirrus console
option		CV64CONSOLE	# CyberVision console
option		TSENGCONSOLE	# Tseng console

option		GRF_ECS		# Enhanced Chip Set
option		GRF_NTSC	# NTSC
option		GRF_PAL		# PAL
option		"GRF_A2024"	# Support for the A2024
option		GRF_AGA		# AGA Chip Set
#option		"KFONT_8X11"	# 8x11 font

# This is how you would tell the kernel the A2410 oscillator frequencies:
# The used frequencies are the defaults, and don't need option setting
#option		"ULOWELL_OSC1=36000000"
#option		"ULOWELL_OSC2=66667000"

# This is how you specify the blitting speed, higher values may speed up blits
# a little bit.  If you raise this value too much some trash may appear.
# the commented version is the default.
#option		RH_MEMCLK 61000000
# this option enables the 64 bit sprite which doesn't seems to be work
# for quite a few people.  E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
#option		RH_64BIT_SPRITE
# enables fast scroll code appears to now work on 040 systems.
#option		RETINA_SPEED_HACK
# enables the Hardwarecursor which does not work on some systems.
#option		RH_HARDWARECURSOR

# Options for the ramdisk.
option		MINIROOTSIZE=3584
option		RAMDISK_HOOKS

config		bsd root rd0 swap rd0

grfcc0		at mainbus0		# custom chips
grfrt0		at zbus0		# retina II
grfrh0		at zbus0		# retina III
grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
grful0		at zbus0		# A2410
grfcv0		at zbus0		# CyberVision 64
grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)

grf0		at grfcc0
grf1		at grfrt0
grf2		at grfrh0
grf3		at grfcl?
grf4		at grful0
grf5		at grfcv0
grf6		at grfet?

ite0		at grf0			# terminal emulators for grf's
ite1		at grf1			# terminal emulators for grf's
ite2		at grf2			# terminal emulators for grf's
ite3		at grf3			# terminal emulators for grf's
ite4		at grf4			# terminal emulators for grf's
ite5		at grf5			# terminal emulators for grf's
ite6		at grf6			# terminal emulators for grf's

#msc0		at zbus0		# A2232 MSC multiport serial.
#mfc0		at zbus0		# MultiFaceCard I/O board
#mfcs0		at mfc0 unit 0		# MFC serial
#mfcs1		at mfc0 unit 1		# MFC serial
#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
#mfcs2		at mfc1 unit 0
#mfcs3		at mfc1 unit 1
#mfcp1		at mfc1 unit 0

le0		at zbus0		# Lance ethernet.
ed0		at zbus0		# dp8390 ethernet
es0		at zbus0		# SMC 91C90 ethernet
qn0		at zbus0		# quicknet ethernet
bah0		at zbus0		# C= arcnet


# scsi stuff, all possible
gvpbus*		at zbus0
gtsc0		at gvpbus?		# GVP series II scsi
ahsc0		at mainbus0		# A3000 scsi
atzsc0		at zbus0		# A2091 scsi
wstsc0		at zbus0		# Wordsync II scsi
ivsc0		at zbus0		# IVS scsi
mlhsc0		at zbus0		# Hacker scsi
otgsc0		at zbus0		# 12 gauge scsi
zssc0		at zbus0		# Zeus scsi
mgnsc0		at zbus0		# Magnum scsi
wesc0		at zbus0		# Warp Engine scsi
idesc0		at mainbus0		# A4000 & A1200 IDE
afsc0		at zbus0		# A4091 scsi
aftsc0		at mainbus0		# A4000T scsi
flsc0		at zbus0		# FastlaneZ3 scsi
bzsc0		at zbus0		# Blizzard 1230 I,II scsi
bztzsc0		at zbus0		# Blizzard 2060 scsi
empsc0		at zbus0		# Emplant scsi
drsc0		at mainbus0		# DraCo scsi

scsibus*	at gtsc0
scsibus*	at ahsc0
scsibus*	at atzsc0
scsibus*	at wstsc0
scsibus*	at ivsc0
scsibus*	at mlhsc0
scsibus*	at otgsc0
scsibus*	at zssc0
scsibus*	at mgnsc0
scsibus*	at wesc0
scsibus*	at idesc0
scsibus*	at afsc0
scsibus*	at aftsc0
scsibus*	at flsc0
scsibus*	at bzsc0
scsibus*	at bztzsc0
scsibus*	at empsc0
scsibus*	at drsc0

# each hard drive from low target to high
# will configure to the next available sd unit number
sd*	at scsibus? target ? lun ?	# scsi disks
st*	at scsibus? target ? lun ?	# scsi tapes
cd*	at scsibus? target ? lun ?	# scsi cd's
#ss*	at scsibus? target ? lun ?	# scsi scanners
#ch*	at scsibus? target ? lun ?	# scsi autochangers
#uk*	at scsibus? target ? lun ?	# scsi unknown

ggbus*	at zbus0			# Goldengate bridge
isa*	at ggbus?

cross*	at zbus0			# CrossLink bridge
isa*	at cross?

#isapnp0	at isa?

#com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
#com1	at isa? port 0x2f8 irq 3
#com2	at isa? port 0x3e8 irq 5
#com3	at isa? port 0x2e8 irq 9	# (conflicts with some video cards)
#com4	at isa? port 0x0f0 irq 11	# Crosslink builtin ports
#com5	at isa? port 0x0f8 irq 10
#ast0	at isa? port 0x1a0 irq 3	# AST 4-port serial cards
#com*	at ast? slave ?
#boca0	at isa? port 0x100 irq 5	# BOCA 8-port serial cards
#com*	at boca? slave ?
#rtfps0	at isa? port 0x1230 irq 10	# RT 4-port serial cards
#com*	at rtfps? slave ?
# option for using CD1400 handshaking for incoming data
# requires a special cable that exchanges the RTS and DTR lines
# options CY_HW_RTS
# cy0	at isa? iomem 0xd4000 irq 12	# ISA cyclom card

#lpt0	at isa? port 0x378 irq 7	# Standard PC parallel ports
#lpt1	at isa? port 0x278
#lpt2	at isa? port 0x3bc

wdc0	at isa? port 0x1f0 irq 14	# ST506, ESDI, and IDE controllers
#wdc1	at isa? port 0x170 irq ?
wd*	at wdc? drive ?

we0	at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC 80x3 ethernet series
we1	at isa? port 0x300 iomem 0xcc000 irq 10	#
ec0	at isa? port 0x250 iomem 0xd8000 irq 9	# 3C503 ethernet cards
ne0	at isa? port 0x240 iomem 0xd8000 irq 9	# NE[12]000 ethernet cards
ne1	at isa? port 0x300 irq 10		# NE[12]000 ethernet cards
#ne*	at isapnp?				# NE[12]000 PnP ethernet cards

fd*	at fdc0 unit ?

pseudo-device	view	1		# views
pseudo-device	rd	1		# ramdisk