/* $OpenBSD: grf_cv.c,v 1.9 1996/05/04 13:54:22 niklas Exp $ */ /* $NetBSD: grf_cv.c,v 1.13 1996/05/01 09:59:24 veego Exp $ */ /* * Copyright (c) 1995 Michael Teske * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Ezra Story, by Kari * Mettinen and by Bernd Ernesti. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "grfcv.h" #if NGRFCV > 0 /* * Graphics routines for the CyberVision 64 board, using the S3 Trio64. * * Modified for CV64 from * Kari Mettinen's Cirrus driver by Michael Teske 10/95 * For questions mail me at teske@mail.desy.de * * Thanks to Tekelec Airtronic for providing me with a S3 Trio64 documentation. * Thanks to Bernd 'the fabulous bug-finder' Ernesti for bringing my messy * source to NetBSD style :) * * TODO: * Bugfree Hardware Cursor support. * The HWC routines provided here are buggy in 16/24 bit * and may cause a Vertical Bar Crash of the Trio64. * On the other hand it's better to put the routines in the Xserver, * so please don't put CV_HARDWARE_CURSOR in your config file. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include int grfcvmatch __P((struct device *, void *, void *)); void grfcvattach __P((struct device *, struct device *, void *)); int grfcvprint __P((void *, char *)); static int cv_has_4mb __P((volatile caddr_t)); static unsigned short compute_clock __P((unsigned long)); void cv_boardinit __P((struct grf_softc *)); int cv_getvmode __P((struct grf_softc *, struct grfvideo_mode *)); int cv_setvmode __P((struct grf_softc *, unsigned int)); int cv_blank __P((struct grf_softc *, int *)); int cv_mode __P((register struct grf_softc *, u_long, void *, u_long, int)); int cv_ioctl __P((register struct grf_softc *gp, u_long cmd, void *data)); int cv_setmonitor __P((struct grf_softc *, struct grfvideo_mode *)); int cv_getcmap __P((struct grf_softc *, struct grf_colormap *)); int cv_putcmap __P((struct grf_softc *, struct grf_colormap *)); int cv_toggle __P((struct grf_softc *)); int cv_mondefok __P((struct grfvideo_mode *)); int cv_load_mon __P((struct grf_softc *, struct grfcvtext_mode *)); void cv_inittextmode __P((struct grf_softc *)); static inline void cv_write_port __P((unsigned short, volatile caddr_t)); static inline void cvscreen __P((int, volatile caddr_t)); static inline void gfx_on_off __P((int, volatile caddr_t)); #ifdef CV_HARDWARE_CURSOR int cv_getspritepos __P((struct grf_softc *, struct grf_position *)); int cv_setspritepos __P((struct grf_softc *, struct grf_position *)); int cv_getspriteinfo __P((struct grf_softc *,struct grf_spriteinfo *)); void cv_setup_hwc __P((struct grf_softc *, unsigned char, unsigned char, unsigned char, unsigned char, const unsigned long *)); int cv_setspriteinfo __P((struct grf_softc *,struct grf_spriteinfo *)); int cv_getspritemax __P((struct grf_softc *,struct grf_position *)); #endif /* CV_HARDWARE_CURSOR */ /* Graphics display definitions. * These are filled by 'grfconfig' using GRFIOCSETMON. */ #define monitor_def_max 24 static struct grfvideo_mode monitor_def[24] = { {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0} }; static struct grfvideo_mode *monitor_current = &monitor_def[0]; #define MAXPIXELCLOCK 135000000 /* safety */ /* generated by gen_cvtab.c */ static int cv_convtab[31] = { 163, 148, 135, 124, 114, 106, 98, 91, 85, 79, 74, 69, 65, 61, 57, 53, 50, 47, 44, 42, 39, 37, 35, 33, 31, 29, 27, 26, 24, 22, 21, }; /* Console display definition. * Default hardcoded text mode. This grf_cv is set up to * use one text mode only, and this is it. You may use * grfconfig to change the mode after boot. */ /* Console font */ #ifdef KFONT_8X11 #define S3FONT kernel_font_8x11 #define S3FONTY 11 #else #define S3FONT kernel_font_8x8 #define S3FONTY 8 #endif extern unsigned char S3FONT[]; /* * Define default console mode * (Internally, we still have to use hvalues/8!) */ struct grfcvtext_mode cvconsole_mode = { {255, "", 25000000, 640, 480, 4, 640/8, 784/8, 680/8, 768/8, 800/8, 481, 521, 491, 493, 525}, 8, S3FONTY, 80, 480 / S3FONTY, S3FONT, 32, 255 }; /* Console colors */ unsigned char cvconscolors[16][3] = { /* background, foreground, hilite */ /* R G B */ {0x30, 0x30, 0x30}, {0x00, 0x00, 0x00}, {0x80, 0x00, 0x00}, {0x00, 0x80, 0x00}, {0x00, 0x00, 0x80}, {0x80, 0x80, 0x00}, {0x00, 0x80, 0x80}, {0x80, 0x00, 0x80}, {0xff, 0xff, 0xff}, {0x40, 0x40, 0x40}, {0xff, 0x00, 0x00}, {0x00, 0xff, 0x00}, {0x00, 0x00, 0xff}, {0xff, 0xff, 0x00}, {0x00, 0xff, 0xff}, {0xff, 0x00, 0xff} }; static unsigned char clocks[]={ 0x13, 0x61, 0x6b, 0x6d, 0x51, 0x69, 0x54, 0x69, 0x4f, 0x68, 0x6b, 0x6b, 0x18, 0x61, 0x7b, 0x6c, 0x51, 0x67, 0x24, 0x62, 0x56, 0x67, 0x77, 0x6a, 0x1d, 0x61, 0x53, 0x66, 0x6b, 0x68, 0x79, 0x69, 0x7c, 0x69, 0x7f, 0x69, 0x22, 0x61, 0x54, 0x65, 0x56, 0x65, 0x58, 0x65, 0x67, 0x66, 0x41, 0x63, 0x27, 0x61, 0x13, 0x41, 0x37, 0x62, 0x6b, 0x4d, 0x23, 0x43, 0x51, 0x49, 0x79, 0x66, 0x54, 0x49, 0x7d, 0x66, 0x34, 0x56, 0x4f, 0x63, 0x1f, 0x42, 0x6b, 0x4b, 0x7e, 0x4d, 0x18, 0x41, 0x2a, 0x43, 0x7b, 0x4c, 0x74, 0x4b, 0x51, 0x47, 0x65, 0x49, 0x24, 0x42, 0x68, 0x49, 0x56, 0x47, 0x75, 0x4a, 0x77, 0x4a, 0x31, 0x43, 0x1d, 0x41, 0x71, 0x49, 0x53, 0x46, 0x29, 0x42, 0x6b, 0x48, 0x1f, 0x41, 0x79, 0x49, 0x6f, 0x48, 0x7c, 0x49, 0x38, 0x43, 0x7f, 0x49, 0x5d, 0x46, 0x22, 0x41, 0x53, 0x45, 0x54, 0x45, 0x55, 0x45, 0x56, 0x45, 0x57, 0x45, 0x58, 0x45, 0x25, 0x41, 0x67, 0x46, 0x5b, 0x45, 0x41, 0x43, 0x78, 0x47, 0x27, 0x41, 0x51, 0x44, 0x13, 0x21, 0x7d, 0x47, 0x37, 0x42, 0x71, 0x46, 0x6b, 0x2d, 0x14, 0x21, 0x23, 0x23, 0x7d, 0x2f, 0x51, 0x29, 0x61, 0x2b, 0x79, 0x46, 0x1d, 0x22, 0x54, 0x29, 0x45, 0x27, 0x7d, 0x46, 0x7f, 0x46, 0x4f, 0x43, 0x2f, 0x41, 0x1f, 0x22, 0x6a, 0x2b, 0x6b, 0x2b, 0x5b, 0x29, 0x7e, 0x2d, 0x65, 0x44, 0x18, 0x21, 0x5e, 0x29, 0x2a, 0x23, 0x45, 0x26, 0x7b, 0x2c, 0x19, 0x21, 0x74, 0x2b, 0x75, 0x2b, 0x51, 0x27, 0x3f, 0x25, 0x65, 0x29, 0x40, 0x25, 0x24, 0x22, 0x41, 0x25, 0x68, 0x29, 0x42, 0x25, 0x56, 0x27, 0x7e, 0x2b, 0x75, 0x2a, 0x1c, 0x21, 0x77, 0x2a, 0x4f, 0x26, 0x31, 0x23, 0x6f, 0x29, 0x1d, 0x21, 0x32, 0x23, 0x71, 0x29, 0x72, 0x29, 0x53, 0x26, 0x69, 0x28, 0x29, 0x22, 0x75, 0x29, 0x6b, 0x28, 0x1f, 0x21, 0x1f, 0x21, 0x6d, 0x28, 0x79, 0x29, 0x2b, 0x22, 0x6f, 0x28, 0x59, 0x26, 0x7c, 0x29, 0x7d, 0x29, 0x38, 0x23, 0x21, 0x21, 0x7f, 0x29, 0x39, 0x23, 0x5d, 0x26, 0x75, 0x28, 0x22, 0x21, 0x77, 0x28, 0x53, 0x25, 0x6c, 0x27, 0x54, 0x25, 0x61, 0x26, 0x55, 0x25, 0x30, 0x22, 0x56, 0x25, 0x63, 0x26, 0x57, 0x25, 0x71, 0x27, 0x58, 0x25, 0x7f, 0x28, 0x25, 0x21, 0x74, 0x27, 0x67, 0x26, 0x40, 0x23, 0x5b, 0x25, 0x26, 0x21, 0x41, 0x23, 0x34, 0x22, 0x78, 0x27, 0x6b, 0x26, 0x27, 0x21, 0x35, 0x22, 0x51, 0x24, 0x7b, 0x27, 0x13, 0x1, 0x13, 0x1, 0x7d, 0x27, 0x4c, 0x9, 0x37, 0x22, 0x5b, 0xb, 0x71, 0x26, 0x5c, 0xb, 0x6b, 0xd, 0x47, 0x23, 0x14, 0x1, 0x4f, 0x9, 0x23, 0x3, 0x75, 0x26, 0x7d, 0xf, 0x1c, 0x2, 0x51, 0x9, 0x59, 0x24, 0x61, 0xb, 0x69, 0x25, 0x79, 0x26, 0x34, 0x5, 0x1d, 0x2, 0x6b, 0x25, 0x54, 0x9, 0x35, 0x5, 0x45, 0x7, 0x6d, 0x25, 0x7d, 0x26, 0x16, 0x1, 0x7f, 0x26, 0x77, 0xd, 0x4f, 0x23, 0x78, 0xd, 0x2f, 0x21, 0x27, 0x3, 0x1f, 0x2, 0x59, 0x9, 0x6a, 0xb, 0x73, 0x25, 0x6b, 0xb, 0x63, 0x24, 0x5b, 0x9, 0x20, 0x2, 0x7e, 0xd, 0x4b, 0x7, 0x65, 0x24, 0x43, 0x22, 0x18, 0x1, 0x6f, 0xb, 0x5e, 0x9, 0x70, 0xb, 0x2a, 0x3, 0x33, 0x4, 0x45, 0x6, 0x60, 0x9, 0x7b, 0xc, 0x19, 0x1, 0x19, 0x1, 0x7d, 0xc, 0x74, 0xb, 0x50, 0x7, 0x75, 0xb, 0x63, 0x9, 0x51, 0x7, 0x23, 0x2, 0x3f, 0x5, 0x1a, 0x1, 0x65, 0x9, 0x2d, 0x3, 0x40, 0x5, 0x0, 0x0, }; /* Board Address of CV64 */ static volatile caddr_t cv_boardaddr; static int cv_fbsize; /* * Memory clock (binpatchable). * Let's be defensive: 50 MHz runs on all boards I know of. * 55 MHz runs on most boards. But you should know what you're doing * if you set this flag. Again: This flag may destroy your CV Board. * Use it at your own risk!!! * Anyway, this doesn't imply that I'm responsible if your board breaks * without setting this flag :-). */ #ifdef CV_AGGRESSIVE_TIMING long cv_memclk = 55000000; #else long cv_memclk = 50000000; #endif /* standard driver stuff */ struct cfattach grfcv_ca = { sizeof(struct grf_softc), grfcvmatch, grfcvattach }; struct cfdriver grfcv_cd = { NULL, "grfcv", DV_DULL, NULL, 0 }; static struct cfdata *cfdata; /* * Get frambuffer memory size. * phase5 didn't provide the bit in CR36, * so we have to do it this way. * Return 0 for 2MB, 1 for 4MB */ static int cv_has_4mb(fb) volatile caddr_t fb; { volatile unsigned long *testfbw, *testfbr; /* write patterns in memory and test if they can be read */ testfbw = (volatile unsigned long *)fb; testfbr = (volatile unsigned long *)(fb + 0x02000000); *testfbw = 0x87654321; if (*testfbr != 0x87654321) return (0); /* upper memory region */ testfbw = (volatile unsigned long *)(fb + 0x00200000); testfbr = (volatile unsigned long *)(fb + 0x02200000); *testfbw = 0x87654321; if (*testfbr != 0x87654321) return (0); *testfbw = 0xAAAAAAAA; if (*testfbr != 0xAAAAAAAA) return (0); *testfbw = 0x55555555; if (*testfbr != 0x55555555) return (0); return (1); } int grfcvmatch(pdp, match, auxp) struct device *pdp; void *match, *auxp; { #ifdef CV64CONSOLE struct cfdata *cfp = match; static int cvcons_unit = -1; #endif struct zbus_args *zap; zap = auxp; if (amiga_realconfig == 0) #ifdef CV64CONSOLE if (cvcons_unit != -1) #endif return (0); /* Lets be Paranoid: Test man and prod id */ if (zap->manid != 8512 || zap->prodid != 34) return (0); cv_boardaddr = zap->va; #ifdef CV64CONSOLE if (amiga_realconfig == 0) { cvcons_unit = cfp->cf_unit; cfdata = cfp; } #endif return (1); } void grfcvattach(pdp, dp, auxp) struct device *pdp, *dp; void *auxp; { static struct grf_softc congrf; struct zbus_args *zap; struct grf_softc *gp; static char attachflag = 0; zap = auxp; /* * This function is called twice, once on console init (dp == NULL) * and once on "normal" grf5 init. */ if (dp == NULL) /* console init */ gp = &congrf; else gp = (struct grf_softc *)dp; if (dp != NULL && congrf.g_regkva != 0) { /* * inited earlier, just copy (not device struct) */ printf("\n"); #ifdef CV64CONSOLE bcopy(&congrf.g_display, &gp->g_display, (char *) &gp[1] - (char *) &gp->g_display); #else gp->g_regkva = (volatile caddr_t)cv_boardaddr + 0x02000000; gp->g_fbkva = (volatile caddr_t)cv_boardaddr + 0x01400000; gp->g_unit = GRF_CV64_UNIT; gp->g_mode = cv_mode; gp->g_conpri = grfcv_cnprobe(); gp->g_flags = GF_ALIVE; #endif } else { gp->g_regkva = (volatile caddr_t)cv_boardaddr + 0x02000000; gp->g_fbkva = (volatile caddr_t)cv_boardaddr + 0x01400000; gp->g_unit = GRF_CV64_UNIT; gp->g_mode = cv_mode; gp->g_conpri = grfcv_cnprobe(); gp->g_flags = GF_ALIVE; /* wakeup the board */ cv_boardinit(gp); #ifdef CV64CONSOLE grfcv_iteinit(gp); (void)cv_load_mon(gp, &cvconsole_mode); #endif } /* * attach grf */ if (amiga_config_found(cfdata, &gp->g_device, gp, grfcvprint)) { if (dp != NULL) printf("grfcv: CyberVision64 with %dMB being used\n", cv_fbsize/0x100000); attachflag = 1; } else { if (!attachflag) /*printf("grfcv unattached!!\n")*/; } } int grfcvprint(auxp, pnp) void *auxp; char *pnp; { if (pnp) printf("ite at %s: ", pnp); return (UNCONF); } /* * Computes M, N, and R values from * given input frequency. It uses a table of * precomputed values, to keep CPU time low. * * The return value consist of: * lower byte: Bits 4-0: N Divider Value * Bits 5-6: R Value for e.g. SR10 or SR12 * higher byte: Bits 0-6: M divider value for e.g. SR11 or SR13 */ static unsigned short compute_clock(freq) unsigned long freq; { static unsigned char *mnr, *save; /* M, N + R vals */ unsigned long work_freq, r; unsigned short erg; long diff, d2; if (freq < 12500000 || freq > MAXPIXELCLOCK) { printf("grfcv: Illegal clock frequency: %ldMHz\n", freq/1000000); printf("grfcv: Using default frequency: 25MHz\n"); printf("grfcv: See the manpage of grfconfig for more informations.\n"); freq = 25000000; } mnr = clocks; /* there the vals are stored */ d2 = 0x7fffffff; while (*mnr) { /* mnr vals are 0-terminated */ work_freq = (0x37EE * (mnr[0] + 2)) / ((mnr[1] & 0x1F) + 2); r = (mnr[1] >> 5) & 0x03; if (r != 0) work_freq=work_freq >> r; /* r is the freq divider */ work_freq *= 0x3E8; /* 2nd part of OSC */ diff = abs(freq - work_freq); if (d2 >= diff) { d2 = diff; /* In save are the vals for minimal diff */ save = mnr; } mnr += 2; } erg = *((unsigned short *)save); return (erg); } void cv_boardinit(gp) struct grf_softc *gp; { volatile caddr_t ba; unsigned char test; unsigned int clockpar; int i; struct grfinfo *gi; ba = gp->g_regkva; /* Reset board */ for (i = 0; i < 6; i++) cv_write_port (0xff, ba - 0x02000000); /* Clear all bits */ /* Return to operational Mode */ cv_write_port(0x8004, ba - 0x02000000); /* Wakeup Chip */ vgaw(ba, SREG_VIDEO_SUBS_ENABLE, 0x10); vgaw(ba, SREG_OPTION_SELECT, 0x01); vgaw(ba, SREG_VIDEO_SUBS_ENABLE, 0x08); vgaw(ba, GREG_MISC_OUTPUT_W, 0x03); WCrt(ba, CRT_ID_REGISTER_LOCK_1, 0x48); /* unlock S3 VGA regs */ WCrt(ba, CRT_ID_REGISTER_LOCK_2, 0xA5); /* unlock syscontrol */ test = RCrt(ba, CRT_ID_SYSTEM_CONFIG); test = test | 0x01; /* enable enhaced register access */ test = test & 0xEF; /* clear bit 4, 0 wait state */ WCrt(ba, CRT_ID_SYSTEM_CONFIG, test); /* * bit 1=1: enable enhanced mode functions * bit 4=1: enable linear adressing * bit 5=1: enable MMIO */ vgaw(ba, ECR_ADV_FUNC_CNTL, 0x31); /* enable cpu acess, color mode, high 64k page */ vgaw(ba, GREG_MISC_OUTPUT_W, 0x23); /* Cpu base addr */ WCrt(ba, CRT_ID_EXT_SYS_CNTL_4, 0x00); /* Reset. This does nothing, but everyone does it:) */ WSeq(ba, SEQ_ID_RESET, 0x03); WSeq(ba, SEQ_ID_CLOCKING_MODE, 0x01); /* 8 Dot Clock */ WSeq(ba, SEQ_ID_MAP_MASK, 0x0f); /* Enable write planes */ WSeq(ba, SEQ_ID_CHAR_MAP_SELECT, 0x00); /* Character Font */ WSeq(ba, SEQ_ID_MEMORY_MODE, 0x02); /* Complete mem access */ WSeq(ba, SEQ_ID_UNLOCK_EXT, 0x06); /* Unlock extensions */ test = RSeq(ba, SEQ_ID_BUS_REQ_CNTL); /* Bus Request */ /* enable 4MB fast Page Mode */ test = test | 1 << 6; WSeq(ba, SEQ_ID_BUS_REQ_CNTL, test); /* faster LUT write */ WSeq(ba, SEQ_ID_RAMDAC_CNTL, 0xC0); test = RSeq(ba, SEQ_ID_CLKSYN_CNTL_2); /* Clksyn2 read */ /* immediately Clkload bit clear */ test = test & 0xDF; /* 2 MCLK Memory Write.... */ if (cv_memclk >= 55000000) test |= 0x80; WSeq(ba, SEQ_ID_CLKSYN_CNTL_2, test); /* Memory CLK */ clockpar = compute_clock(cv_memclk); test = (clockpar & 0xFF00) >> 8; WSeq(ba, SEQ_ID_MCLK_HI, test); /* PLL N-Divider Value */ test = clockpar & 0xFF; WSeq(ba, SEQ_ID_MCLK_LO, test); /* PLL M-Divider Value */ if (RCrt(ba, CRT_ID_REVISION) == 0x10) /* bugfix for new S3 chips */ WSeq(ba, SEQ_ID_MORE_MAGIC, test); /* We now load an 25 MHz, 31 kHz, 640x480 standard VGA Mode. */ /* DCLK */ WSeq(ba, SEQ_ID_DCLK_HI, 0x13); WSeq(ba, SEQ_ID_DCLK_LO, 0x41); test = RSeq (ba, SEQ_ID_CLKSYN_CNTL_2); test = test | 0x22; /* DCLK + MCLK Clock immediate load! */ WSeq(ba,SEQ_ID_CLKSYN_CNTL_2, test); /* DCLK load */ test = vgar(ba, 0x3cc); test = test | 0x0c; vgaw(ba, 0x3c2, test); /* Clear bit 5 again, prevent further loading. */ WSeq(ba, SEQ_ID_CLKSYN_CNTL_2, 0x02); WCrt(ba, CRT_ID_HOR_TOTAL, 0x5F); WCrt(ba, CRT_ID_HOR_DISP_ENA_END, 0x4F); WCrt(ba, CRT_ID_START_HOR_BLANK, 0x50); WCrt(ba, CRT_ID_END_HOR_BLANK, 0x82); WCrt(ba, CRT_ID_START_HOR_RETR, 0x54); WCrt(ba, CRT_ID_END_HOR_RETR, 0x80); WCrt(ba, CRT_ID_VER_TOTAL, 0xBF); WCrt(ba, CRT_ID_OVERFLOW, 0x1F); /* overflow reg */ WCrt(ba, CRT_ID_PRESET_ROW_SCAN, 0x00); /* no panning */ WCrt(ba, CRT_ID_MAX_SCAN_LINE, 0x40); /* vscan */ WCrt(ba, CRT_ID_CURSOR_START, 0x00); WCrt(ba, CRT_ID_CURSOR_END, 0x00); /* Display start adress */ WCrt(ba, CRT_ID_START_ADDR_HIGH, 0x00); WCrt(ba, CRT_ID_START_ADDR_LOW, 0x00); /* Cursor location */ WCrt(ba, CRT_ID_CURSOR_LOC_HIGH, 0x00); WCrt(ba, CRT_ID_CURSOR_LOC_LOW, 0x00); /* Vertical retrace */ WCrt(ba, CRT_ID_START_VER_RETR, 0x9C); WCrt(ba, CRT_ID_END_VER_RETR, 0x0E); WCrt(ba, CRT_ID_VER_DISP_ENA_END, 0x8F); WCrt(ba, CRT_ID_SCREEN_OFFSET, 0x50); WCrt(ba, CRT_ID_UNDERLINE_LOC, 0x00); WCrt(ba, CRT_ID_START_VER_BLANK, 0x96); WCrt(ba, CRT_ID_END_VER_BLANK, 0xB9); WCrt(ba, CRT_ID_MODE_CONTROL, 0xE3); WCrt(ba, CRT_ID_LINE_COMPARE, 0xFF); WCrt(ba, CRT_ID_BACKWAD_COMP_3, 0x10); /* FIFO enabled */ /* Refresh count 1, High speed text font, enhanced color mode */ WCrt(ba, CRT_ID_MISC_1, 0x35); /* start fifo position */ WCrt(ba, CRT_ID_DISPLAY_FIFO, 0x5a); WCrt(ba, CRT_ID_EXT_MEM_CNTL_2, 0x70); /* address window position */ WCrt(ba, CRT_ID_LAW_POS_LO, 0x40); /* N Parameter for Display FIFO */ WCrt(ba, CRT_ID_EXT_MEM_CNTL_3, 0xFF); WGfx(ba, GCT_ID_SET_RESET, 0x00); WGfx(ba, GCT_ID_ENABLE_SET_RESET, 0x00); WGfx(ba, GCT_ID_COLOR_COMPARE, 0x00); WGfx(ba, GCT_ID_DATA_ROTATE, 0x00); WGfx(ba, GCT_ID_READ_MAP_SELECT, 0x00); WGfx(ba, GCT_ID_GRAPHICS_MODE, 0x40); WGfx(ba, GCT_ID_MISC, 0x01); WGfx(ba, GCT_ID_COLOR_XCARE, 0x0F); WGfx(ba, GCT_ID_BITMASK, 0xFF); /* colors for text mode */ for (i = 0; i <= 0xf; i++) WAttr (ba, i, i); WAttr(ba, ACT_ID_ATTR_MODE_CNTL, 0x41); WAttr(ba, ACT_ID_OVERSCAN_COLOR, 0x01); WAttr(ba, ACT_ID_COLOR_PLANE_ENA, 0x0F); WAttr(ba, ACT_ID_HOR_PEL_PANNING, 0x00); WAttr(ba, ACT_ID_COLOR_SELECT, 0x00); vgaw(ba, VDAC_MASK, 0xFF); /* DAC Mask */ *((unsigned long *)(ba + ECR_FRGD_COLOR)) = 0xFF; *((unsigned long *)(ba + ECR_BKGD_COLOR)) = 0; /* colors initially set to greyscale */ vgaw(ba, VDAC_ADDRESS_W, 0); for (i = 255; i >= 0 ; i--) { vgaw(ba, VDAC_DATA, i); vgaw(ba, VDAC_DATA, i); vgaw(ba, VDAC_DATA, i); } /* GFx hardware cursor off */ WCrt(ba, CRT_ID_HWGC_MODE, 0x00); /* Set first to 4 MB, so test will work */ WCrt(ba, CRT_ID_LAW_CNTL, 0x13); /* find *correct* fbsize of z3 board */ if (cv_has_4mb((volatile caddr_t)cv_boardaddr + 0x01400000)) { cv_fbsize = 1024 * 1024 * 4; WCrt(ba, CRT_ID_LAW_CNTL, 0x13); /* 4 MB */ } else { cv_fbsize = 1024 * 1024 * 2; WCrt(ba, CRT_ID_LAW_CNTL, 0x12); /* 2 MB */ } /* Initialize graphics engine */ GfxBusyWait(ba); vgaw16(ba, ECR_FRGD_MIX, 0x27); vgaw16(ba, ECR_BKGD_MIX, 0x07); vgaw16(ba, ECR_READ_REG_DATA, 0x1000); delay(200000); vgaw16(ba, ECR_READ_REG_DATA, 0x2000); GfxBusyWait(ba); vgaw16(ba, ECR_READ_REG_DATA, 0x3fff); GfxBusyWait(ba); delay(200000); vgaw16(ba, ECR_READ_REG_DATA, 0x4fff); GfxBusyWait(ba); vgaw16(ba, ECR_BITPLANE_WRITE_MASK, ~0); GfxBusyWait (ba); vgaw16(ba, ECR_READ_REG_DATA, 0xe000); vgaw16(ba, ECR_CURRENT_Y_POS2, 0x00); vgaw16(ba, ECR_CURRENT_X_POS2, 0x00); vgaw16(ba, ECR_READ_REG_DATA, 0xa000); vgaw16(ba, ECR_DEST_Y__AX_STEP, 0x00); vgaw16(ba, ECR_DEST_Y2__AX_STEP2, 0x00); vgaw16(ba, ECR_DEST_X__DIA_STEP, 0x00); vgaw16(ba, ECR_DEST_X2__DIA_STEP2, 0x00); vgaw16(ba, ECR_SHORT_STROKE, 0x00); vgaw16(ba, ECR_DRAW_CMD, 0x01); GfxBusyWait (ba); /* It ain't easy to write here, so let's do it again */ vgaw16(ba, ECR_READ_REG_DATA, 0x4fff); vgaw16(ba, ECR_BKGD_COLOR, 0x01); vgaw16(ba, ECR_FRGD_COLOR, 0x00); /* Enable Video Display (Set Bit 5) */ WAttr(ba, 0x33, 0); gi = &gp->g_display; gi->gd_regaddr = (caddr_t) kvtop (ba); gi->gd_regsize = 64 * 1024; gi->gd_fbaddr = (caddr_t) kvtop (gp->g_fbkva); gi->gd_fbsize = cv_fbsize; } int cv_getvmode(gp, vm) struct grf_softc *gp; struct grfvideo_mode *vm; { struct grfvideo_mode *gv; #ifdef CV64CONSOLE /* Handle grabbing console mode */ if (vm->mode_num == 255) { bcopy(&cvconsole_mode, vm, sizeof(struct grfvideo_mode)); /* XXX so grfconfig can tell us the correct text dimensions. */ vm->depth = cvconsole_mode.fy; } else #endif { if (vm->mode_num == 0) vm->mode_num = (monitor_current - monitor_def) + 1; if (vm->mode_num < 1 || vm->mode_num > monitor_def_max) return (EINVAL); gv = monitor_def + (vm->mode_num - 1); if (gv->mode_num == 0) return (EINVAL); bcopy(gv, vm, sizeof(struct grfvideo_mode)); } /* adjust internal values to pixel values */ vm->hblank_start *= 8; vm->hblank_stop *= 8; vm->hsync_start *= 8; vm->hsync_stop *= 8; vm->htotal *= 8; return (0); } int cv_setvmode(gp, mode) struct grf_softc *gp; unsigned mode; { if (!mode || (mode > monitor_def_max) || monitor_def[mode - 1].mode_num == 0) return (EINVAL); monitor_current = monitor_def + (mode - 1); return (0); } int cv_blank(gp, on) struct grf_softc *gp; int *on; { volatile caddr_t ba; ba = gp->g_regkva; gfx_on_off(*on ? 0 : 1, ba); return (0); } /* * Change the mode of the display. * Return a UNIX error number or 0 for success. */ int cv_mode(gp, cmd, arg, a2, a3) register struct grf_softc *gp; u_long cmd; void *arg; u_long a2; int a3; { int error; switch (cmd) { case GM_GRFON: error = cv_load_mon (gp, (struct grfcvtext_mode *) monitor_current) ? 0 : EINVAL; return (error); case GM_GRFOFF: #ifndef CV64CONSOLE (void)cv_toggle(gp); #else cv_load_mon(gp, &cvconsole_mode); ite_reinit(gp->g_itedev); #endif return (0); case GM_GRFCONFIG: return (0); case GM_GRFGETVMODE: return (cv_getvmode (gp, (struct grfvideo_mode *) arg)); case GM_GRFSETVMODE: error = cv_setvmode (gp, *(unsigned *) arg); if (!error && (gp->g_flags & GF_GRFON)) cv_load_mon(gp, (struct grfcvtext_mode *) monitor_current); return (error); case GM_GRFGETNUMVM: *(int *)arg = monitor_def_max; return (0); case GM_GRFIOCTL: return (cv_ioctl (gp, a2, arg)); default: break; } return (EINVAL); } int cv_ioctl (gp, cmd, data) register struct grf_softc *gp; u_long cmd; void *data; { switch (cmd) { #ifdef CV_HARDWARE_CURSOR case GRFIOCGSPRITEPOS: return(cv_getspritepos (gp, (struct grf_position *) data)); case GRFIOCSSPRITEPOS: return(cv_setspritepos (gp, (struct grf_position *) data)); case GRFIOCSSPRITEINF: return(cv_setspriteinfo (gp, (struct grf_spriteinfo *) data)); case GRFIOCGSPRITEINF: return(cv_getspriteinfo (gp, (struct grf_spriteinfo *) data)); case GRFIOCGSPRITEMAX: return(cv_getspritemax (gp, (struct grf_position *) data)); #else /* CV_HARDWARE_CURSOR */ case GRFIOCGSPRITEPOS: case GRFIOCSSPRITEPOS: case GRFIOCSSPRITEINF: case GRFIOCGSPRITEINF: case GRFIOCGSPRITEMAX: break; #endif /* CV_HARDWARE_CURSOR */ case GRFIOCGETCMAP: return (cv_getcmap (gp, (struct grf_colormap *) data)); case GRFIOCPUTCMAP: return (cv_putcmap (gp, (struct grf_colormap *) data)); case GRFIOCBITBLT: break; case GRFTOGGLE: return (cv_toggle (gp)); case GRFIOCSETMON: return (cv_setmonitor (gp, (struct grfvideo_mode *)data)); case GRFIOCBLANK: return (cv_blank (gp, (int *)data)); } return (EINVAL); } int cv_setmonitor(gp, gv) struct grf_softc *gp; struct grfvideo_mode *gv; { struct grfvideo_mode *md; if (!cv_mondefok(gv)) return (EINVAL); #ifdef CV64CONSOLE /* handle interactive setting of console mode */ if (gv->mode_num == 255) { bcopy(gv, &cvconsole_mode.gv, sizeof(struct grfvideo_mode)); cvconsole_mode.gv.hblank_start /= 8; cvconsole_mode.gv.hblank_stop /= 8; cvconsole_mode.gv.hsync_start /= 8; cvconsole_mode.gv.hsync_stop /= 8; cvconsole_mode.gv.htotal /= 8; cvconsole_mode.rows = gv->disp_height / cvconsole_mode.fy; cvconsole_mode.cols = gv->disp_width / cvconsole_mode.fx; if (!(gp->g_flags & GF_GRFON)) cv_load_mon(gp, &cvconsole_mode); ite_reinit(gp->g_itedev); return (0); } #endif md = monitor_def + (gv->mode_num - 1); bcopy(gv, md, sizeof(struct grfvideo_mode)); /* adjust pixel oriented values to internal rep. */ md->hblank_start /= 8; md->hblank_stop /= 8; md->hsync_start /= 8; md->hsync_stop /= 8; md->htotal /= 8; return (0); } int cv_getcmap(gfp, cmap) struct grf_softc *gfp; struct grf_colormap *cmap; { volatile caddr_t ba; u_char red[256], green[256], blue[256], *rp, *gp, *bp; short x; int error; ba = gfp->g_regkva; if (cmap->count == 0 || cmap->index >= 256) return (0); if (cmap->index + cmap->count > 256) cmap->count = 256 - cmap->index; /* first read colors out of the chip, then copyout to userspace */ vgaw (ba, VDAC_ADDRESS_W, cmap->index); x = cmap->count - 1; rp = red + cmap->index; gp = green + cmap->index; bp = blue + cmap->index; do { *rp++ = vgar (ba, VDAC_DATA) << 2; *gp++ = vgar (ba, VDAC_DATA) << 2; *bp++ = vgar (ba, VDAC_DATA) << 2; } while (x-- > 0); if (!(error = copyout (red + cmap->index, cmap->red, cmap->count)) && !(error = copyout (green + cmap->index, cmap->green, cmap->count)) && !(error = copyout (blue + cmap->index, cmap->blue, cmap->count))) return (0); return (error); } int cv_putcmap(gfp, cmap) struct grf_softc *gfp; struct grf_colormap *cmap; { volatile caddr_t ba; u_char red[256], green[256], blue[256], *rp, *gp, *bp; short x; int error; ba = gfp->g_regkva; if (cmap->count == 0 || cmap->index >= 256) return (0); if (cmap->index + cmap->count > 256) cmap->count = 256 - cmap->index; /* first copy the colors into kernelspace */ if (!(error = copyin (cmap->red, red + cmap->index, cmap->count)) && !(error = copyin (cmap->green, green + cmap->index, cmap->count)) && !(error = copyin (cmap->blue, blue + cmap->index, cmap->count))) { vgaw (ba, VDAC_ADDRESS_W, cmap->index); x = cmap->count - 1; rp = red + cmap->index; gp = green + cmap->index; bp = blue + cmap->index; do { vgaw (ba, VDAC_DATA, *rp++ >> 2); vgaw (ba, VDAC_DATA, *gp++ >> 2); vgaw (ba, VDAC_DATA, *bp++ >> 2); } while (x-- > 0); return (0); } else return (error); } int cv_toggle(gp) struct grf_softc *gp; { volatile caddr_t ba; ba = gp->g_regkva; cvscreen(1, ba - 0x02000000); return (0); } int cv_mondefok(gv) struct grfvideo_mode *gv; { unsigned long maxpix; int widthok = 0; if (gv->mode_num < 1 || gv->mode_num > monitor_def_max) { if (gv->mode_num != 255 || (gv->depth != 4 && gv->depth != 8)) return (0); } switch(gv->depth) { case 4: case 8: maxpix = MAXPIXELCLOCK; break; case 15: case 16: #ifdef CV_AGGRESSIVE_TIMING maxpix = MAXPIXELCLOCK - 35000000; #else maxpix = MAXPIXELCLOCK - 55000000; #endif break; case 24: case 32: #ifdef CV_AGGRESSIVE_TIMING maxpix = MAXPIXELCLOCK - 75000000; #else maxpix = MAXPIXELCLOCK - 85000000; #endif break; default: return (0); } if (gv->pixel_clock > maxpix) return (0); /* * These are the supported witdh values for the * graphics engine. To Support other widths, one * has to use one of these widths for memory alignment, i.e. * one has to set CRT_ID_SCREEN_OFFSET to one of these values and * CRT_ID_HOR_DISP_ENA_END to the desired width. * Since a working graphics engine is essential * for the console, console modes of other width are not supported. * We could do that, though, but then you have to tell the Xserver * about this strange configuration and I don't know how at the moment :-) */ switch (gv->disp_width) { case 1024: case 640: case 800: case 1280: case 1152: case 1600: widthok = 1; break; default: /* XXX*/ widthok = 0; break; } if (widthok) return (1); else { if (gv->mode_num == 255) { /* console mode */ return (1); } else { printf ("Warning for mode %d:\n", (int) gv->mode_num); printf ("Don't use a blitter-suporting Xserver with this display width\n"); printf ("Use one of 640 800 1024 1152 1280 1600!\n"); return (1); } } return (1); } int cv_load_mon(gp, md) struct grf_softc *gp; struct grfcvtext_mode *md; { struct grfvideo_mode *gv; struct grfinfo *gi; volatile caddr_t ba, fb; unsigned short mnr; unsigned short HT, HDE, HBS, HBE, HSS, HSE, VDE, VBS, VBE, VSS, VSE, VT; char LACE, DBLSCAN, TEXT, CONSOLE; int uplim, lowlim; int cr50, cr33, sr15, sr18, clock_mode, test; int m, n; /* For calc'ing display FIFO */ int tfillm, temptym; /* FIFO fill and empty mclk's */ int hmul; /* Multiplier for hor. Values */ /* identity */ gv = &md->gv; TEXT = (gv->depth == 4); CONSOLE = (gv->mode_num == 255); if (!cv_mondefok(gv)) { printf("grfcv: The monitor definition is not okay.\n"); printf("grfcv: See the manpage of grfconfig for more informations\n"); return (0); } ba = gp->g_regkva; fb = gp->g_fbkva; /* turn gfx off, don't mess up the display */ gfx_on_off(1, ba); /* provide all needed information in grf device-independant locations */ gp->g_data = (caddr_t) gv; gi = &gp->g_display; gi->gd_colors = 1 << gv->depth; gi->gd_planes = gv->depth; gi->gd_fbwidth = gv->disp_width; gi->gd_fbheight = gv->disp_height; gi->gd_fbx = 0; gi->gd_fby = 0; if (CONSOLE) { gi->gd_dwidth = md->fx * md->cols; gi->gd_dheight = md->fy * md->rows; } else { gi->gd_dwidth = gv->disp_width; gi->gd_dheight = gv->disp_height; } gi->gd_dx = 0; gi->gd_dy = 0; /* get display mode parameters */ switch (gv->depth) { case 15: case 16: hmul = 2; break; default: hmul = 1; break; } HBS = gv->hblank_start * hmul; HBE = gv->hblank_stop * hmul; HSS = gv->hsync_start * hmul; HSE = gv->hsync_stop * hmul; HT = gv->htotal*hmul - 5; VBS = gv->vblank_start - 1; VSS = gv->vsync_start; VSE = gv->vsync_stop; VBE = gv->vblank_stop; VT = gv->vtotal - 2; /* Disable enhanced Mode for text display */ vgaw(ba, ECR_ADV_FUNC_CNTL, (TEXT ? 0x00 : 0x31)); if (TEXT) HDE = ((gv->disp_width + md->fx - 1) / md->fx) - 1; else HDE = (gv->disp_width + 3) * hmul / 8 - 1; /*HBS;*/ VDE = gv->disp_height - 1; /* figure out whether lace or dblscan is needed */ uplim = gv->disp_height + (gv->disp_height / 4); lowlim = gv->disp_height - (gv->disp_height / 4); LACE = (((VT * 2) > lowlim) && ((VT * 2) < uplim)) ? 1 : 0; DBLSCAN = (((VT / 2) > lowlim) && ((VT / 2) < uplim)) ? 1 : 0; /* adjustments */ if (LACE) VDE /= 2; /* GFx hardware cursor off */ WCrt(ba, CRT_ID_HWGC_MODE, 0x00); WSeq(ba, SEQ_ID_MEMORY_MODE, (TEXT || (gv->depth == 1)) ? 0x06 : 0x0e); WGfx(ba, GCT_ID_READ_MAP_SELECT, 0x00); WSeq(ba, SEQ_ID_MAP_MASK, (gv->depth == 1) ? 0x01 : 0xff); WSeq(ba, SEQ_ID_CHAR_MAP_SELECT, 0x00); /* Set clock */ mnr = compute_clock(gv->pixel_clock); WSeq(ba, SEQ_ID_DCLK_HI, ((mnr & 0xFF00) >> 8)); WSeq(ba, SEQ_ID_DCLK_LO, (mnr & 0xFF)); /* load display parameters into board */ WCrt(ba, CRT_ID_EXT_HOR_OVF, ((HT & 0x100) ? 0x01 : 0x00) | ((HDE & 0x100) ? 0x02 : 0x00) | ((HBS & 0x100) ? 0x04 : 0x00) | /* ((HBE & 0x40) ? 0x08 : 0x00) | */ /* Later... */ ((HSS & 0x100) ? 0x10 : 0x00) | /* ((HSE & 0x20) ? 0x20 : 0x00) | */ (((HT-5) & 0x100) ? 0x40 : 0x00) ); WCrt(ba, CRT_ID_EXT_VER_OVF, 0x40 | /* Line compare */ ((VT & 0x400) ? 0x01 : 0x00) | ((VDE & 0x400) ? 0x02 : 0x00) | ((VBS & 0x400) ? 0x04 : 0x00) | ((VSS & 0x400) ? 0x10 : 0x00) ); WCrt(ba, CRT_ID_HOR_TOTAL, HT); WCrt(ba, CRT_ID_DISPLAY_FIFO, HT - 5); WCrt(ba, CRT_ID_HOR_DISP_ENA_END, ((HDE >= HBS) ? (HBS - 1) : HDE)); WCrt(ba, CRT_ID_START_HOR_BLANK, HBS); WCrt(ba, CRT_ID_END_HOR_BLANK, ((HBE & 0x1f) | 0x80)); WCrt(ba, CRT_ID_START_HOR_RETR, HSS); WCrt(ba, CRT_ID_END_HOR_RETR, (HSE & 0x1f) | ((HBE & 0x20) ? 0x80 : 0x00) ); WCrt(ba, CRT_ID_VER_TOTAL, VT); WCrt(ba, CRT_ID_OVERFLOW, 0x10 | ((VT & 0x100) ? 0x01 : 0x00) | ((VDE & 0x100) ? 0x02 : 0x00) | ((VSS & 0x100) ? 0x04 : 0x00) | ((VBS & 0x100) ? 0x08 : 0x00) | ((VT & 0x200) ? 0x20 : 0x00) | ((VDE & 0x200) ? 0x40 : 0x00) | ((VSS & 0x200) ? 0x80 : 0x00) ); WCrt(ba, CRT_ID_MAX_SCAN_LINE, 0x40 | /* TEXT ? 0x00 ??? */ (DBLSCAN ? 0x80 : 0x00) | ((VBS & 0x200) ? 0x20 : 0x00) | (TEXT ? ((md->fy - 1) & 0x1f) : 0x00)); WCrt(ba, CRT_ID_MODE_CONTROL, 0xe3); /* text cursor */ if (TEXT) { #if 1 WCrt(ba, CRT_ID_CURSOR_START, (md->fy & 0x1f) - 2); WCrt(ba, CRT_ID_CURSOR_END, (md->fy & 0x1f) - 1); #else WCrt(ba, CRT_ID_CURSOR_START, 0x00); WCrt(ba, CRT_ID_CURSOR_END, md->fy & 0x1f); #endif WCrt(ba, CRT_ID_UNDERLINE_LOC, (md->fy - 1) & 0x1f); WCrt(ba, CRT_ID_CURSOR_LOC_HIGH, 0x00); WCrt(ba, CRT_ID_CURSOR_LOC_LOW, 0x00); } WCrt(ba, CRT_ID_START_ADDR_HIGH, 0x00); WCrt(ba, CRT_ID_START_ADDR_LOW, 0x00); WCrt(ba, CRT_ID_START_VER_RETR, VSS); WCrt(ba, CRT_ID_END_VER_RETR, (VSE & 0x0f)); WCrt(ba, CRT_ID_VER_DISP_ENA_END, VDE); WCrt(ba, CRT_ID_START_VER_BLANK, VBS); WCrt(ba, CRT_ID_END_VER_BLANK, VBE); WCrt(ba, CRT_ID_LINE_COMPARE, 0xff); WCrt(ba, CRT_ID_LACE_RETR_START, HT / 2); WCrt(ba, CRT_ID_LACE_CONTROL, (LACE ? 0x20 : 0x00)); WGfx(ba, GCT_ID_GRAPHICS_MODE, ((TEXT || (gv->depth == 1)) ? 0x00 : 0x40)); WGfx(ba, GCT_ID_MISC, (TEXT ? 0x04 : 0x01)); WSeq (ba, SEQ_ID_MEMORY_MODE, ((TEXT || (gv->depth == 1)) ? 0x06 : 0x02)); vgaw(ba, VDAC_MASK, 0xff); sr15 = RSeq(ba, SEQ_ID_CLKSYN_CNTL_2); sr15 &= 0xef; sr18 = RSeq(ba, SEQ_ID_RAMDAC_CNTL); sr18 &= 0x7f; cr33 = RCrt(ba, CRT_ID_BACKWAD_COMP_2); cr33 &= 0xdf; clock_mode = 0x00; cr50 = 0x00; test = RCrt(ba, CRT_ID_EXT_MISC_CNTL_2); test &= 0xd; /* clear roxxler byte-swapping... */ cv_write_port(0x0040, cv_boardaddr); cv_write_port(0x0020, cv_boardaddr); switch (gv->depth) { case 1: case 4: /* text */ HDE = gv->disp_width / 16; break; case 8: if (gv->pixel_clock > 80000000) { clock_mode = 0x10 | 0x02; sr15 |= 0x10; sr18 |= 0x80; cr33 |= 0x20; } HDE = gv->disp_width / 8; cr50 |= 0x00; break; case 15: cv_write_port (0x8020, cv_boardaddr); clock_mode = 0x30; HDE = gv->disp_width / 4; cr50 |= 0x10; break; case 16: cv_write_port (0x8020, cv_boardaddr); clock_mode = 0x50; HDE = gv->disp_width / 4; cr50 |= 0x10; break; case 24: /* this is really 32 Bit on CV64 */ case 32: cv_write_port(0x8040, cv_boardaddr); clock_mode = 0xd0; HDE = (gv->disp_width / 2); cr50 |= 0x30; break; } WCrt(ba, CRT_ID_EXT_MISC_CNTL_2, clock_mode | test); WSeq(ba, SEQ_ID_CLKSYN_CNTL_2, sr15); WSeq(ba, SEQ_ID_RAMDAC_CNTL, sr18); WCrt(ba, CRT_ID_BACKWAD_COMP_2, cr33); WCrt(ba, CRT_ID_SCREEN_OFFSET, HDE); WCrt(ba, CRT_ID_MISC_1, (TEXT ? 0x05 : 0x35)); test = RCrt(ba, CRT_ID_EXT_SYS_CNTL_2); test &= ~0x30; /* HDE Overflow in bits 4-5 */ test |= (HDE >> 4) & 0x30; WCrt(ba, CRT_ID_EXT_SYS_CNTL_2, test); /* Set up graphics engine */ switch (gv->disp_width) { case 1024: cr50 |= 0x00; break; case 640: cr50 |= 0x40; break; case 800: cr50 |= 0x80; break; case 1280: cr50 |= 0xc0; break; case 1152: cr50 |= 0x01; break; case 1600: cr50 |= 0x81; break; default: /* XXX*/ break; } WCrt(ba, CRT_ID_EXT_SYS_CNTL_1, cr50); delay(100000); WAttr(ba, ACT_ID_ATTR_MODE_CNTL, (TEXT ? 0x08 : 0x41)); delay(100000); WAttr(ba, ACT_ID_COLOR_PLANE_ENA, (gv->depth == 1) ? 0x01 : 0x0f); delay(100000); /* * M-Parameter of Display FIFO * This is dependant on the pixel clock and the memory clock. * The FIFO filling bandwidth is 240 MHz and the FIFO is 96 Byte wide. * Then the time to fill the FIFO is tfill = (96/240000000) sec, the * time to empty the FIFO is tempty = (96/pixelclock) sec. * Then the M parameter maximum is ((tempty-tfill)*cv_memclk-9)/2. * This seems to be logical, ain't it? * Remember: We have to use integer arithmetics :( * Divide by 1000 to prevent overflows. */ tfillm = (96 * (cv_memclk/1000))/240000; switch(gv->depth) { case 32: case 24: temptym = (24 * (cv_memclk/1000)) / (gv->pixel_clock/1000); break; case 15: case 16: temptym = (48 * (cv_memclk/1000)) / (gv->pixel_clock/1000); break; default: temptym = (96 * (cv_memclk/1000)) / (gv->pixel_clock/1000); break; } m = (temptym - tfillm - 9) / 2; if (m < 0) m = 0; /* prevent underflow */ m = (m & 0x1f) << 3; if (m < 0x18) m = 0x18; n = 0xff; WCrt(ba, CRT_ID_EXT_MEM_CNTL_2, m); WCrt(ba, CRT_ID_EXT_MEM_CNTL_3, n); delay(10000); /* text initialization */ if (TEXT) { cv_inittextmode(gp); } if (CONSOLE) { int i; vgaw(ba, VDAC_ADDRESS_W, 0); for (i = 0; i < 16; i++) { vgaw(ba, VDAC_DATA, cvconscolors[i][0]); vgaw(ba, VDAC_DATA, cvconscolors[i][1]); vgaw(ba, VDAC_DATA, cvconscolors[i][2]); } } /* Some kind of Magic */ WAttr(ba, 0x33, 0); /* turn gfx on again */ gfx_on_off(0, ba); /* Pass-through */ cvscreen(0, ba - 0x02000000); return (1); } void cv_inittextmode(gp) struct grf_softc *gp; { struct grfcvtext_mode *tm = (struct grfcvtext_mode *)gp->g_data; volatile caddr_t ba, fb; unsigned char *c, *f, y; unsigned short z; ba = gp->g_regkva; fb = gp->g_fbkva; /* load text font into beginning of display memory. * Each character cell is 32 bytes long (enough for 4 planes) * In linear adressing text mode, the memory is organized * so, that the Bytes of all 4 planes are interleaved. * 1st byte plane 0, 1st byte plane 1, 1st byte plane 2, * 1st byte plane 3, 2nd byte plane 0, 2nd byte plane 1,... * The font is loaded in plane 2. */ c = (unsigned char *) fb; /* clear screen */ for (z = 0; z < tm->cols * tm->rows * 3; z++) { *c++ = 0x20; *c++ = 0x07; *c++ = 0; *c++ = 0; } c = (unsigned char *) (fb) + (32 * tm->fdstart * 4 + 2); f = tm->fdata; for (z = tm->fdstart; z <= tm->fdend; z++, c += (32 - tm->fy) * 4) for (y = 0; y < tm->fy; y++) { *c = *f++; c += 4; } /* print out a little init msg */ c = (unsigned char *)(fb) + (tm->cols - 6) * 4; *c++ = 'C'; *c++ = 0x0a; c +=2; *c++ = 'V'; *c++ = 0x0b; c +=2; *c++ = '6'; *c++ = 0x0c; c +=2; *c++ = '4'; *c++ = 0x0d; } static inline void cv_write_port(bits, BoardAddr) unsigned short bits; volatile caddr_t BoardAddr; { volatile caddr_t addr; static unsigned char CVPortBits = 0; /* mirror port bits here */ addr = BoardAddr + 0x40001; if (bits & 0x8000) CVPortBits |= bits & 0xFF; /* Set bits */ else { bits = bits & 0xFF; bits = (~bits) & 0xFF ; CVPortBits &= bits; /* Clear bits */ } *addr = CVPortBits; } /* * Monitor Switch * 0 = CyberVision Signal * 1 = Amiga Signal, * ba = boardaddr */ static inline void cvscreen(toggle, ba) int toggle; volatile caddr_t ba; { if (toggle == 1) cv_write_port (0x10, ba); else cv_write_port (0x8010, ba); } /* 0 = on, 1= off */ /* ba= registerbase */ static inline void gfx_on_off(toggle, ba) int toggle; volatile caddr_t ba; { int r; toggle &= 0x1; toggle = toggle << 5; r = RSeq(ba, SEQ_ID_CLOCKING_MODE); r &= 0xdf; /* set Bit 5 to 0 */ WSeq(ba, SEQ_ID_CLOCKING_MODE, r | toggle); } #ifdef CV_HARDWARE_CURSOR static unsigned char cv_hotx = 0, cv_hoty = 0; /* Hardware Cursor handling routines */ int cv_getspritepos (gp, pos) struct grf_softc *gp; struct grf_position *pos; { int hi,lo; volatile caddr_t ba = gp->g_regkva; hi = RCrt (ba, CRT_ID_HWGC_ORIGIN_Y_HI); lo = RCrt (ba, CRT_ID_HWGC_ORIGIN_Y_LO); pos->y = (hi << 8) + lo; hi = RCrt (ba, CRT_ID_HWGC_ORIGIN_X_HI); lo = RCrt (ba, CRT_ID_HWGC_ORIGIN_X_LO); pos->x = (hi << 8) + lo; return (0); } int cv_setspritepos (gp, pos) struct grf_softc *gp; struct grf_position *pos; { volatile caddr_t ba = gp->g_regkva; short x = pos->x, y = pos->y; short xoff, yoff; x -= cv_hotx; y -= cv_hoty; if (x < 0) { xoff = ((-x) & 0xFE); x = 0; } else { xoff = 0; } if (y < 0) { yoff = ((-y) & 0xFE); y = 0; } else { yoff = 0; } WCrt (ba, CRT_ID_HWGC_ORIGIN_X_HI, (x >> 8)); WCrt (ba, CRT_ID_HWGC_ORIGIN_X_LO, (x & 0xff)); WCrt (ba, CRT_ID_HWGC_ORIGIN_Y_LO, (y & 0xff)); WCrt (ba, CRT_ID_HWGC_DSTART_X, xoff); WCrt (ba, CRT_ID_HWGC_DSTART_Y, yoff); WCrt (ba, CRT_ID_HWGC_ORIGIN_Y_HI, (y >> 8)); return(0); } #define M2I(val) \ asm volatile (" rorw #8,%0 ; \ swap %0 ; \ rorw #8,%0 ; " : "=d" (val) : "0" (val)); #define M2INS(val) \ asm volatile (" rorw #8,%0 ; \ swap %0 ; \ rorw #8,%0 ; \ swap %0 ; " : "=d" (val) : "0" (val)); #define HWC_OFF (cv_fbsize - 1024*2) #define HWC_SIZE 1024 int cv_getspriteinfo (gp, info) struct grf_softc *gp; struct grf_spriteinfo *info; { volatile caddr_t ba, fb; ba = gp->g_regkva; fb = gp->g_fbkva; if (info->set & GRFSPRSET_ENABLE) info->enable = RCrt(ba, CRT_ID_HWGC_MODE) & 0x01; if (info->set & GRFSPRSET_POS) cv_getspritepos (gp, &info->pos); #if 0 /* XXX */ if (info->set & GRFSPRSET_SHAPE) { u_char image[512], mask[512]; volatile u_long *hwp; u_char *imp, *mp; short row; info->size.x = 64; info->size.y = 64; for (row = 0, hwp = (u_long *)(fb + HWC_OFF), mp = mask, imp = image; row < 64; row++) { u_long bp10, bp20, bp11, bp21; bp10 = *hwp++; bp20 = *hwp++; bp11 = *hwp++; bp21 = *hwp++; M2I (bp10); M2I (bp20); M2I (bp11); M2I (bp21); *imp++ = (~bp10) & bp11; *imp++ = (~bp20) & bp21; *mp++ = (~bp10) | (bp10 & ~bp11); *mp++ = (~bp20) & (bp20 & ~bp21); } copyout (image, info->image, sizeof (image)); copyout (mask, info->mask, sizeof (mask)); } #endif return(0); } void cv_setup_hwc (gp, col1, col2, hsx, hsy, data) struct grf_softc *gp; unsigned char col1; unsigned char col2; unsigned char hsx; unsigned char hsy; const unsigned long *data; { volatile unsigned char *ba = gp->g_regkva; unsigned long *c = (unsigned long *)(gp->g_fbkva + HWC_OFF); const unsigned long *s = data; int test; short x = (HWC_SIZE / (4*4)) - 1; /* copy only, if there is a data pointer. */ if (data) do { *c++ = *s++; *c++ = *s++; *c++ = *s++; *c++ = *s++; } while (x-- > 0); /* reset colour stack */ test = RCrt(ba, CRT_ID_HWGC_MODE); asm volatile("nop"); WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); test = RCrt(ba, CRT_ID_HWGC_MODE); asm volatile("nop"); WCrt (ba, CRT_ID_HWGC_BG_STACK, 0x1); WCrt (ba, CRT_ID_HWGC_BG_STACK, 0x1); WCrt (ba, CRT_ID_HWGC_BG_STACK, 0x1); test = HWC_OFF / HWC_SIZE; WCrt (ba, CRT_ID_HWGC_START_AD_HI, (test >> 8)); WCrt (ba, CRT_ID_HWGC_START_AD_LO, (test & 0xff)); WCrt (ba, CRT_ID_HWGC_DSTART_X , 0); WCrt (ba, CRT_ID_HWGC_DSTART_Y , 0); WCrt (ba, CRT_ID_EXT_DAC_CNTL, 0x10); /* Cursor X11 Mode */ WCrt (ba, CRT_ID_HWGC_MODE, 0x01); } /* This is the reason why you shouldn't use the HGC in the Kernel:( */ #define VerticalRetraceWait(ba) \ { \ while (vgar(ba, GREG_INPUT_STATUS1_R) == 0x00) ; \ while ((vgar(ba, GREG_INPUT_STATUS1_R) & 0x08) == 0x08) ; \ while ((vgar(ba, GREG_INPUT_STATUS1_R) & 0x08) == 0x00) ; \ } int cv_setspriteinfo (gp, info) struct grf_softc *gp; struct grf_spriteinfo *info; { volatile caddr_t ba, fb; ba = gp->g_regkva; fb = gp->g_fbkva; if (info->set & GRFSPRSET_SHAPE) { /* * For an explanation of these weird actions here, see above * when reading the shape. We set the shape directly into * the video memory, there's no reason to keep 1k on the * kernel stack just as template */ u_char *image, *mask; volatile u_short *hwp; u_char *imp, *mp; unsigned short row; /* Cursor off */ WCrt (ba, CRT_ID_HWGC_MODE, 0x00); /* move cursor off-screen */ WCrt (ba, CRT_ID_HWGC_ORIGIN_X_HI, 0x7); WCrt (ba, CRT_ID_HWGC_ORIGIN_X_LO, 0xff); WCrt (ba, CRT_ID_HWGC_ORIGIN_Y_LO, 0xff); WCrt (ba, CRT_ID_HWGC_DSTART_X, 0x3f); WCrt (ba, CRT_ID_HWGC_DSTART_Y, 0x3f); WCrt (ba, CRT_ID_HWGC_ORIGIN_Y_HI, 0x7); if (info->size.y > 64) info->size.y = 64; if (info->size.x > 64) info->size.x = 64; if (info->size.x < 32) info->size.x = 32; image = malloc(HWC_SIZE, M_TEMP, M_WAITOK); mask = image + HWC_SIZE/2; copyin(info->image, image, info->size.y * info->size.x / 8); copyin(info->mask, mask, info->size.y * info->size.x / 8); hwp = (u_short *)(fb +HWC_OFF); /* * setting it is slightly more difficult, because we can't * force the application to not pass a *smaller* than * supported bitmap */ for (row = 0, mp = mask, imp = image; row < info->size.y; row++) { u_short im1, im2, im3, im4, m1, m2, m3, m4; im1 = *(unsigned short *)imp; imp += 2; m1 = *(unsigned short *)mp; mp += 2; im2 = *(unsigned short *)imp; imp += 2; m2 = *(unsigned short *)mp; mp += 2; if (info->size.x > 32) { im3 = *(unsigned long *)imp; imp += 4; m3 = *(unsigned long *)mp; mp += 4; im4 = *(unsigned long *)imp; imp += 4; m4 = *(unsigned long *)mp; mp += 4; } else im3 = m3 = im4 = m4 = 0; *hwp++ = m1; *hwp++ = im1; *hwp++ = m2; *hwp++ = im2; *hwp++ = m3; *hwp++ = im3; *hwp++ = m4; *hwp++ = im4; } for (; row < 64; row++) { *hwp++ = 0x0000; *hwp++ = 0x0000; *hwp++ = 0x0000; *hwp++ = 0x0000; *hwp++ = 0x0000; *hwp++ = 0x0000; *hwp++ = 0x0000; *hwp++ = 0x0000; } free(image, M_TEMP); cv_setup_hwc(gp, 1, 0, 0, 0, NULL); cv_hotx = info->hot.x; cv_hoty = info->hot.y; /* One must not write twice per vertical blank :-( */ VerticalRetraceWait(ba); cv_setspritepos (gp, &info->pos); } if (info->set & GRFSPRSET_CMAP) { int test; int depth = gp->g_display.gd_planes; /* reset colour stack */ test = RCrt(ba, CRT_ID_HWGC_MODE); asm volatile("nop"); switch (depth) { case 24: case 32: WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); case 8: case 16: /* info->cmap.green[1] */ WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); WCrt (ba, CRT_ID_HWGC_FG_STACK, 0); } test = RCrt(ba, CRT_ID_HWGC_MODE); asm volatile("nop"); switch (depth) { case 8: WCrt (ba, CRT_ID_HWGC_BG_STACK, 1); WCrt (ba, CRT_ID_HWGC_BG_STACK, 1); break; case 32: case 24: WCrt (ba, CRT_ID_HWGC_BG_STACK, 0xff); case 16: WCrt (ba, CRT_ID_HWGC_BG_STACK, 0xff); WCrt (ba, CRT_ID_HWGC_BG_STACK, 0xff); } } if (info->set & GRFSPRSET_ENABLE) { #if 0 if (info->enable) control = 0x85; else control = 0; WSeq(ba, SEQ_ID_CURSOR_CONTROL, control); #endif } if (info->set & GRFSPRSET_POS) cv_setspritepos(gp, &info->pos); if (info->set & GRFSPRSET_HOT) { cv_hotx = info->hot.x; cv_hoty = info->hot.y; cv_setspritepos (gp, &info->pos); } return(0); } int cv_getspritemax (gp, pos) struct grf_softc *gp; struct grf_position *pos; { pos->x = 64; pos->y = 64; return(0); } #endif /* CV_HARDWARE_CURSOR */ #endif /* NGRFCV */