/* $OpenBSD: if_es.c,v 1.11 1999/05/13 15:44:48 jason Exp $ */ /* $NetBSD: if_es.c,v 1.16 1996/12/23 09:10:17 veego Exp $ */ /* * Copyright (c) 1995 Michael L. Hitch * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Michael L. Hitch. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * SMC 91C90 Single-Chip Ethernet Controller */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #ifdef NS #include #include #endif #include #include #include #include #include #include #define SWAP(x) (((x & 0xff) << 8) | ((x >> 8) & 0xff)) #define USEPKTBUF /* * Ethernet software status per interface. * * Each interface is referenced by a network interface structure, * es_if, which the routing code uses to locate the interface. * This structure contains the output queue for the interface, its address, ... */ struct es_softc { struct device sc_dev; struct isr sc_isr; struct arpcom sc_arpcom; /* common Ethernet structures */ void *sc_base; /* base address of board */ short sc_iflags; unsigned short sc_intctl; #ifdef ESDEBUG int sc_debug; short sc_intbusy; /* counter for interrupt rentered */ short sc_smcbusy; /* counter for other rentry checks */ #endif }; #if NBPFILTER > 0 #include #include #endif #ifdef ESDEBUG /* console error messages */ int esdebug = 0; int estxints = 0; /* IST_TX with TX enabled */ int estxint2 = 0; /* IST_TX active after IST_TX_EMPTY */ int estxint3 = 0; /* IST_TX interrupt processed */ int estxint4 = 0; /* ~TEMPTY counts */ int estxint5 = 0; /* IST_TX_EMPTY interrupts */ void es_dump_smcregs __P((char *, union smcregs *)); #endif int esintr __P((void *)); void esstart __P((struct ifnet *)); void eswatchdog __P((struct ifnet *)); int esioctl __P((struct ifnet *, u_long, caddr_t)); void esrint __P((struct es_softc *)); void estint __P((struct es_softc *)); void esinit __P((struct es_softc *)); void esreset __P((struct es_softc *)); void esstop __P((struct es_softc *)); int esmatch __P((struct device *, void *, void *)); void esattach __P((struct device *, struct device *, void *)); struct cfattach es_ca = { sizeof(struct es_softc), esmatch, esattach }; struct cfdriver es_cd = { NULL, "es", DV_IFNET }; int esmatch(parent, match, aux) struct device *parent; void *match, *aux; { struct zbus_args *zap = aux; /* Ameristar A4066 ethernet card */ if (zap->manid == 1053 && zap->prodid == 10) return(1); return (0); } /* * Interface exists: make available by filling in network interface * record. System will initialize the interface when it is ready * to accept packets. */ void esattach(parent, self, aux) struct device *parent, *self; void *aux; { struct es_softc *sc = (void *)self; struct zbus_args *zap = aux; struct ifnet *ifp = &sc->sc_arpcom.ac_if; unsigned long ser; sc->sc_base = zap->va; /* * Manufacturer decides the 3 first bytes, i.e. ethernet vendor ID. * (Currently only Ameristar.) */ sc->sc_arpcom.ac_enaddr[0] = 0x00; sc->sc_arpcom.ac_enaddr[1] = 0x00; sc->sc_arpcom.ac_enaddr[2] = 0x9f; /* * Serial number for board contains last 3 bytes. */ ser = (unsigned long) zap->serno; sc->sc_arpcom.ac_enaddr[3] = (ser >> 16) & 0xff; sc->sc_arpcom.ac_enaddr[4] = (ser >> 8) & 0xff; sc->sc_arpcom.ac_enaddr[5] = (ser ) & 0xff; /* Initialize ifnet structure. */ bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ); ifp->if_softc = sc; ifp->if_output = ether_output; ifp->if_ioctl = esioctl; ifp->if_start = esstart; ifp->if_watchdog = eswatchdog; /* XXX IFF_MULTICAST */ ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS; /* Attach the interface. */ if_attach(ifp); ether_ifattach(ifp); /* Print additional info when attached. */ printf(": address %s\n", ether_sprintf(sc->sc_arpcom.ac_enaddr)); #if NBPFILTER > 0 bpfattach(&ifp->if_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif sc->sc_isr.isr_intr = esintr; sc->sc_isr.isr_arg = sc; sc->sc_isr.isr_ipl = 2; add_isr(&sc->sc_isr); } #ifdef ESDEBUG void es_dump_smcregs(where, smc) char *where; union smcregs *smc; { u_short cur_bank = smc->b0.bsr & BSR_MASK; printf("SMC registers %p from %s bank %04x\n", smc, where, smc->b0.bsr); smc->b0.bsr = BSR_BANK0; printf("TCR %04x EPHSR %04x RCR %04x ECR %04x MIR %04x MCR %04x\n", SWAP(smc->b0.tcr), SWAP(smc->b0.ephsr), SWAP(smc->b0.rcr), SWAP(smc->b0.ecr), SWAP(smc->b0.mir), SWAP(smc->b0.mcr)); smc->b1.bsr = BSR_BANK1; printf("CR %04x BAR %04x IAR %04x %04x %04x GPR %04x CTR %04x\n", SWAP(smc->b1.cr), SWAP(smc->b1.bar), smc->b1.iar[0], smc->b1.iar[1], smc->b1.iar[2], smc->b1.gpr, SWAP(smc->b1.ctr)); smc->b2.bsr = BSR_BANK2; printf("MMUCR %04x PNR %02x ARR %02x FIFO %04x PTR %04x", SWAP(smc->b2.mmucr), smc->b2.pnr, smc->b2.arr, smc->b2.fifo, SWAP(smc->b2.ptr)); printf(" DATA %04x %04x IST %02x MSK %02x\n", smc->b2.data, smc->b2.datax, smc->b2.ist, smc->b2.msk); smc->b3.bsr = BSR_BANK3; printf("MT %04x %04x %04x %04x\n", smc->b3.mt[0], smc->b3.mt[1], smc->b3.mt[2], smc->b3.mt[3]); smc->b3.bsr = cur_bank; } #endif void esstop(sc) struct es_softc* sc; { } void esinit(sc) struct es_softc *sc; { struct ifnet *ifp = &sc->sc_arpcom.ac_if; union smcregs *smc = sc->sc_base; int s; s = splnet(); #ifdef ESDEBUG if (ifp->if_flags & IFF_RUNNING) es_dump_smcregs("esinit", smc); #endif smc->b0.bsr = BSR_BANK0; /* Select bank 0 */ smc->b0.rcr = RCR_EPH_RST; smc->b0.rcr = 0; smc->b3.bsr = BSR_BANK3; /* Select bank 3 */ smc->b3.mt[0] = 0; /* clear Multicast table */ smc->b3.mt[1] = 0; smc->b3.mt[2] = 0; smc->b3.mt[3] = 0; /* XXX set Multicast table from Multicast list */ smc->b1.bsr = BSR_BANK1; /* Select bank 1 */ smc->b1.cr = CR_RAM32K | CR_NO_WAIT_ST | CR_SET_SQLCH; smc->b1.ctr = CTR_AUTO_RLSE; smc->b1.iar[0] = *((unsigned short *) &sc->sc_arpcom.ac_enaddr[0]); smc->b1.iar[1] = *((unsigned short *) &sc->sc_arpcom.ac_enaddr[2]); smc->b1.iar[2] = *((unsigned short *) &sc->sc_arpcom.ac_enaddr[4]); smc->b2.bsr = BSR_BANK2; /* Select bank 2 */ smc->b2.mmucr = MMUCR_RESET; smc->b0.bsr = BSR_BANK0; /* Select bank 0 */ smc->b0.mcr = SWAP(0x0020); /* reserve 8K for transmit buffers */ smc->b0.tcr = TCR_PAD_EN | (TCR_TXENA + TCR_MON_CSN); smc->b0.rcr = RCR_FILT_CAR | RCR_STRIP_CRC | RCR_RXEN; /* XXX add multicast/promiscuous flags */ smc->b2.bsr = BSR_BANK2; /* Select bank 2 */ smc->b2.msk = sc->sc_intctl = MSK_RX_OVRN | MSK_RX; /* Interface is now 'running', with no output active. */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; /* Attempt to start output, if any. */ esstart(ifp); splx(s); } int esintr(arg) void *arg; { struct es_softc *sc = arg; u_short intsts, intact; union smcregs *smc; int s = splnet(); smc = sc->sc_base; #ifdef ESDEBUG while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2 && sc->sc_arpcom.ac_if.if_flags & IFF_RUNNING) { printf("%s: intr BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } #endif intsts = smc->b2.ist; intact = smc->b2.msk & intsts; if ((intact) == 0) { splx(s); return (0); } #ifdef ESDEBUG if (esdebug) printf ("%s: esintr ist %02x msk %02x", sc->sc_dev.dv_xname, intsts, smc->b2.msk); if (sc->sc_intbusy++) { printf("%s: esintr re-entered\n", sc->sc_dev.dv_xname); panic("esintr re-entered"); } if (sc->sc_smcbusy) printf("%s: esintr interrupted busy %d\n", sc->sc_dev.dv_xname, sc->sc_smcbusy); #endif smc->b2.msk = 0; #ifdef ESDEBUG if (esdebug) printf ("=>%02x%02x pnr %02x arr %02x fifo %04x\n", smc->b2.ist, smc->b2.ist, smc->b2.pnr, smc->b2.arr, smc->b2.fifo); #endif if (intact & IST_ALLOC) { sc->sc_intctl &= ~MSK_ALLOC; #ifdef ESDEBUG if (esdebug || 1) printf ("%s: ist %02x", sc->sc_dev.dv_xname, intsts); #endif if ((smc->b2.arr & ARR_FAILED) == 0) { u_char save_pnr; #ifdef ESDEBUG if (esdebug || 1) printf (" arr %02x\n", smc->b2.arr); #endif save_pnr = smc->b2.pnr; smc->b2.pnr = smc->b2.arr; smc->b2.mmucr = MMUCR_RLSPKT; while (smc->b2.mmucr & MMUCR_BUSY) ; smc->b2.pnr = save_pnr; sc->sc_arpcom.ac_if.if_flags &= ~IFF_OACTIVE; } #ifdef ESDEBUG else if (esdebug || 1) printf (" IST_ALLOC with ARR_FAILED?\n"); #endif } #ifdef ESDEBUG while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: intr+ BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } #endif while ((smc->b2.fifo & FIFO_REMPTY) == 0) { esrint(sc); } #ifdef ESDEBUG while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: intr++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } #endif if (intact & IST_RX_OVRN) { printf ("%s: Overrun ist %02x", sc->sc_dev.dv_xname, intsts); smc->b2.ist = ACK_RX_OVRN; printf ("->%02x\n", smc->b2.ist); sc->sc_arpcom.ac_if.if_ierrors++; } if (intact & IST_TX_EMPTY) { u_short ecr; #ifdef ESDEBUG if (esdebug) printf ("%s: TX EMPTY %02x", sc->sc_dev.dv_xname, intsts); ++estxint5; /* count # IST_TX_EMPTY ints */ #endif smc->b2.ist = ACK_TX_EMPTY; sc->sc_intctl &= ~(MSK_TX_EMPTY | MSK_TX); #ifdef ESDEBUG if (esdebug) printf ("->%02x intcl %x pnr %02x arr %02x\n", smc->b2.ist, sc->sc_intctl, smc->b2.pnr, smc->b2.arr); #endif if (smc->b2.ist & IST_TX) { intact |= IST_TX; #ifdef ESDEBUG ++estxint2; /* count # TX after TX_EMPTY */ #endif } else { smc->b0.bsr = BSR_BANK0; ecr = smc->b0.ecr; /* Get error counters */ if (ecr & 0xff00) sc->sc_arpcom.ac_if.if_collisions += ((ecr >> 8) & 15) + ((ecr >> 11) & 0x1e); smc->b2.bsr = BSR_BANK2; #if 0 smc->b2.mmucr = MMUCR_RESET_TX; /* XXX reset TX FIFO */ #endif } } if (intact & IST_TX) { u_char tx_pnr, save_pnr; u_short save_ptr, ephsr, tcr; int n = 0; #ifdef ESDEBUG if (esdebug) { printf ("%s: TX INT ist %02x", sc->sc_dev.dv_xname, intsts); printf ("->%02x\n", smc->b2.ist); } ++estxint3; /* count # IST_TX */ #endif zzzz: #ifdef ESDEBUG ++estxint4; /* count # ~TEMPTY */ #endif smc->b0.bsr = BSR_BANK0; ephsr = smc->b0.ephsr; /* get EPHSR */ tcr = smc->b0.tcr; /* and TCR */ smc->b2.bsr = BSR_BANK2; save_ptr = smc->b2.ptr; save_pnr = smc->b2.pnr; tx_pnr = smc->b2.fifo >> 8; /* pktno from completion fifo */ smc->b2.pnr = tx_pnr; /* set TX packet number */ smc->b2.ptr = PTR_READ; /* point to status word */ #if 0 /* XXXX */ printf("%s: esintr TXINT IST %02x PNR %02x(%d)", sc->sc_dev.dv_xname, smc->b2.ist, tx_pnr, n); printf(" Status %04x", smc->b2.data); printf(" EPHSR %04x\n", ephsr); #endif if ((smc->b2.data & EPHSR_TX_SUC) == 0 && (tcr & TCR_TXENA) == 0) { /* * Transmitter was stopped for some error. Enqueue * the packet again and restart the transmitter. * May need some check to limit the number of retries. */ smc->b2.mmucr = MMUCR_ENQ_TX; smc->b0.bsr = BSR_BANK0; smc->b0.tcr |= TCR_TXENA; smc->b2.bsr = BSR_BANK2; sc->sc_arpcom.ac_if.if_oerrors++; sc->sc_intctl |= MSK_TX_EMPTY | MSK_TX; } else { /* * This shouldn't have happened: IST_TX indicates * the TX completion FIFO is not empty, but the * status for the packet on the completion FIFO * shows that the transmit was sucessful. Since * AutoRelease is being used, a sucessful transmit * should not result in a packet on the completion * FIFO. Also, that packet doesn't seem to want * to be acknowledged. If this occurs, just reset * the TX FIFOs. */ #if 1 if (smc->b2.ist & IST_TX_EMPTY) { smc->b2.mmucr = MMUCR_RESET_TX; sc->sc_intctl &= ~(MSK_TX_EMPTY | MSK_TX); } #endif #ifdef ESDEBUG ++estxints; /* count IST_TX with TX enabled */ #endif } smc->b2.pnr = save_pnr; smc->b2.ptr = save_ptr; smc->b2.ist = ACK_TX; if ((smc->b2.fifo & FIFO_TEMPTY) == 0 && n++ < 32) { #if 0 /* XXXX */ printf("%s: multiple TX int(%2d) pnr %02x ist %02x fifo %04x", sc->sc_dev.dv_xname, n, tx_pnr, smc->b2.ist, smc->b2.fifo); smc->w2.istmsk = ACK_TX << 8; printf(" %04x\n", smc->b2.fifo); #endif if (tx_pnr != (smc->b2.fifo >> 8)) goto zzzz; } } /* output packets */ estint(sc); #ifdef ESDEBUG while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: intr+++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } #endif smc->b2.msk = sc->sc_intctl; #ifdef ESDEBUG if (--sc->sc_intbusy) { printf("%s: esintr busy on exit\n", sc->sc_dev.dv_xname); panic("esintr busy on exit"); } #endif splx(s); return (1); } void esrint(sc) struct es_softc *sc; { union smcregs *smc = sc->sc_base; u_short len; short cnt; u_short pktctlw, pktlen, *buf; volatile u_short *data; #if 0 u_long *lbuf; volatile u_long *ldata; #endif struct ifnet *ifp; struct mbuf *top, **mp, *m; struct ether_header *eh; #ifdef USEPKTBUF u_char *b, pktbuf[1530]; #endif #ifdef ESDEBUG int i; #endif #ifdef ESDEBUG if (esdebug) printf ("%s: esrint fifo %04x", sc->sc_dev.dv_xname, smc->b2.fifo); if (sc->sc_smcbusy++) { printf("%s: esrint re-entered\n", sc->sc_dev.dv_xname); panic("esrint re-entered"); } while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: rint BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } #endif data = (u_short *)&smc->b2.data; smc->b2.ptr = PTR_RCV | PTR_AUTOINCR | PTR_READ | SWAP(0x0002); (void) smc->b2.mmucr; #ifdef ESDEBUG if (esdebug) printf ("->%04x", smc->b2.fifo); #endif len = *data; len = SWAP(len); /* Careful of macro side-effects */ #ifdef ESDEBUG if (esdebug) printf (" length %d", len); #endif smc->b2.ptr = PTR_RCV | (PTR_AUTOINCR + PTR_READ) | SWAP(0x0000); (void) smc->b2.mmucr; pktctlw = *data; pktlen = *data; pktctlw = SWAP(pktctlw); pktlen = SWAP(pktlen) - 6; if (pktctlw & RFSW_ODDFRM) pktlen++; if (len > 1530) { printf("%s: Corrupted packet length-sts %04x bytcnt %04x len %04x bank %04x\n", sc->sc_dev.dv_xname, pktctlw, pktlen, len, smc->b2.bsr); /* XXX ignore packet, or just truncate? */ #if defined(ESDEBUG) && defined(DDB) if ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) Debugger(); #endif smc->b2.bsr = BSR_BANK2; smc->b2.mmucr = MMUCR_REMRLS_RX; while (smc->b2.mmucr & MMUCR_BUSY) ; ++sc->sc_arpcom.ac_if.if_ierrors; #ifdef ESDEBUG if (--sc->sc_smcbusy) { printf("%s: esrintr busy on bad packet exit\n", sc->sc_dev.dv_xname); panic("esrintr busy on exit"); } #endif return; } #ifdef USEPKTBUF #if 0 lbuf = (u_long *) pktbuf; ldata = (u_long *)data; cnt = (len - 4) / 4; while (cnt--) *lbuf++ = *ldata; if ((len - 4) & 2) { buf = (u_short *) lbuf; *buf = *data; } #else buf = (u_short *)pktbuf; cnt = (len - 4) / 2; while (cnt--) *buf++ = *data; #endif smc->b2.mmucr = MMUCR_REMRLS_RX; while (smc->b2.mmucr & MMUCR_BUSY) ; #ifdef ESDEBUG if (pktctlw & (RFSW_ALGNERR | RFSW_BADCRC | RFSW_TOOLNG | RFSW_TOOSHORT)) { printf ("%s: Packet error %04x\n", sc->sc_dev.dv_xname, pktctlw); /* count input error? */ } if (esdebug) { printf (" pktctlw %04x pktlen %04x fifo %04x\n", pktctlw, pktlen, smc->b2.fifo); for (i = 0; i < pktlen; ++i) printf ("%02x%s", pktbuf[i], ((i & 31) == 31) ? "\n" : ""); if (i & 31) printf ("\n"); } #endif #else /* USEPKTBUF */ /* XXX copy directly from controller to mbuf */ #ifdef ESDEBUG if (pktctlw & (RFSW_ALGNERR | RFSW_BADCRC | RFSW_TOOLNG | RFSW_TOOSHORT)) { printf ("%s: Packet error %04x\n", sc->sc_dev.dv_xname, pktctlw); /* count input error? */ } if (esdebug) { printf (" pktctlw %04x pktlen %04x fifo %04x\n", pktctlw, pktlen, smc->b2.fifo); } #endif #endif /* USEPKTBUF */ ifp = &sc->sc_arpcom.ac_if; ifp->if_ipackets++; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return; m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = pktlen; len = MHLEN; top = NULL; mp = ⊤ #ifdef USEPKTBUF b = pktbuf; #endif while (pktlen > 0) { if (top) { MGET(m, M_DONTWAIT, MT_DATA); if (m == 0) { m_freem(top); return; } len = MLEN; } if (pktlen >= MINCLSIZE) { MCLGET(m, M_DONTWAIT); if (m->m_flags & M_EXT) len = MCLBYTES; } m->m_len = len = min(pktlen, len); #ifdef USEPKTBUF bcopy((caddr_t)b, mtod(m, caddr_t), len); b += len; #else /* USEPKTBUF */ buf = mtod(m, u_short *); cnt = len / 2; while (cnt--) *buf++ = *data; if (len & 1) *buf = *data; /* XXX should be byte store */ #ifdef ESDEBUG if (esdebug) { buf = mtod(m, u_short *); for (i = 0; i < len; ++i) printf ("%02x%s", ((u_char *)buf)[i], ((i & 31) == 31) ? "\n" : ""); if (i & 31) printf ("\n"); } #endif #endif /* USEPKTBUF */ pktlen -= len; *mp = m; mp = &m->m_next; } #ifndef USEPKTBUF smc->b2.mmucr = MMUCR_REMRLS_RX; while (smc->b2.mmucr & MMUCR_BUSY) ; #endif eh = mtod(top, struct ether_header *); #if NBPFILTER > 0 /* * Check if there's a BPF listener on this interface. If so, hand off * the raw packet to bpf. */ if (sc->sc_arpcom.ac_if.if_bpf) bpf_mtap(sc->sc_arpcom.ac_if.if_bpf, top); #endif top->m_pkthdr.len -= sizeof (*eh); top->m_len -= sizeof (*eh); top->m_data += sizeof (*eh); ether_input(ifp, eh, top); #ifdef ESDEBUG if (--sc->sc_smcbusy) { printf("%s: esintr busy on exit\n", sc->sc_dev.dv_xname); panic("esintr busy on exit"); } #endif } void estint(sc) struct es_softc *sc; { esstart(&sc->sc_arpcom.ac_if); } void esstart(ifp) struct ifnet *ifp; { struct es_softc *sc = ifp->if_softc; union smcregs *smc = sc->sc_base; struct mbuf *m0, *m; #ifdef USEPKTBUF u_short pktbuf[ETHERMTU + 2]; #else u_short oddbyte, needbyte; #endif u_short pktctlw, pktlen; u_short *buf; volatile u_short *data; #if 0 u_long *lbuf; volatile u_long *ldata; #endif short cnt; int i; u_char active_pnr; if ((sc->sc_arpcom.ac_if.if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) return; #ifdef ESDEBUG if (sc->sc_smcbusy++) { printf("%s: esstart re-entered\n", sc->sc_dev.dv_xname); panic("esstart re-entred"); } while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: esstart BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } #endif for (;;) { #ifdef ESDEBUG u_short start_ptr, end_ptr; #endif /* * Sneak a peek at the next packet to get the length * and see if the SMC 91C90 can accept it. */ m = sc->sc_arpcom.ac_if.if_snd.ifq_head; if (!m) break; #ifdef ESDEBUG if (esdebug && (m->m_next || m->m_len & 1)) printf("%s: esstart m_next %p m_len %d\n", sc->sc_dev.dv_xname, m->m_next, m->m_len); #endif for (m0 = m, pktlen = 0; m0; m0 = m0->m_next) pktlen += m0->m_len; pktctlw = 0; pktlen += 4; if (pktlen & 1) ++pktlen; /* control byte after last byte */ else pktlen += 2; /* control byte after pad byte */ smc->b2.mmucr = MMUCR_ALLOC | (pktlen & 0x0700); for (i = 0; i <= 5; ++i) if ((smc->b2.arr & ARR_FAILED) == 0) break; if (smc->b2.arr & ARR_FAILED) { sc->sc_arpcom.ac_if.if_flags |= IFF_OACTIVE; sc->sc_intctl |= MSK_ALLOC; break; } active_pnr = smc->b2.pnr = smc->b2.arr; #ifdef ESDEBUG while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: esstart+ BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } #endif IF_DEQUEUE(&sc->sc_arpcom.ac_if.if_snd, m); smc->b2.ptr = PTR_AUTOINCR; (void) smc->b2.mmucr; data = (u_short *)&smc->b2.data; *data = SWAP(pktctlw); *data = SWAP(pktlen); #ifdef ESDEBUG while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: esstart++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } #endif #ifdef USEPKTBUF i = 0; for (m0 = m; m; m = m->m_next) { bcopy(mtod(m, caddr_t), (char *)pktbuf + i, m->m_len); i += m->m_len; } if (i & 1) /* Figure out where to put control byte */ pktbuf[i/2] = (pktbuf[i/2] & 0xff00) | CTLB_ODD; else pktbuf[i/2] = 0; pktlen -= 4; #ifdef ESDEBUG if (pktlen > sizeof(pktbuf) && i > (sizeof(pktbuf) * 2)) printf("%s: esstart packet longer than pktbuf\n", sc->sc_dev.dv_xname); #endif #if 0 /* doesn't quite work? */ lbuf = (u_long *)(pktbuf); ldata = (u_long *)data; cnt = pktlen / 4; while(cnt--) *ldata = *lbuf++; if (pktlen & 2) { buf = (u_short *)lbuf; *data = *buf; } #else #ifdef ESDEBUG while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: esstart++2 BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } start_ptr = SWAP(smc->b2.ptr); /* save PTR before copy */ #endif buf = pktbuf; cnt = pktlen / 2; while (cnt--) *data = *buf++; #ifdef ESDEBUG end_ptr = SWAP(smc->b2.ptr); /* save PTR after copy */ #endif #endif #else /* USEPKTBUF */ pktctlw = 0; oddbyte = needbyte = 0; for (m0 = m; m; m = m->m_next) { buf = mtod(m, u_short *); cnt = m->m_len / 2; if (needbyte) { oddbyte |= *buf >> 8; *data = oddbyte; } while (cnt--) *data = *buf++; if (m->m_len & 1) pktctlw = (*buf & 0xff00) | CTLB_ODD; if (m->m_len & 1 && m->m_next) printf("%s: esstart odd byte count in mbuf\n", sc->sc_dev.dv_xname); } *data = pktctlw; #endif /* USEPKTBUF */ while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { /* * The bank select register has changed. This seems * to happen with my A2000/Zeus once in a while. It * appears that the Ethernet chip resets while * copying the transmit buffer. Requeue the current * transmit buffer and reinitialize the interface. * The initialize routine will take care of * retransmitting the buffer. mhitch */ #ifdef DIAGNOSTIC printf("%s: esstart+++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); #endif smc->b2.bsr = BSR_BANK2; #ifdef ESDEBUG printf("start_ptr %04x end_ptr %04x cur ptr %04x\n", start_ptr, end_ptr, SWAP(smc->b2.ptr)); --sc->sc_smcbusy; #endif IF_PREPEND(&sc->sc_arpcom.ac_if.if_snd, m0); esinit(sc); /* It's really hosed - reset */ return; } smc->b2.mmucr = MMUCR_ENQ_TX; if (smc->b2.pnr != active_pnr) printf("%s: esstart - PNR changed %x->%x\n", sc->sc_dev.dv_xname, active_pnr, smc->b2.pnr); #if NBPFILTER > 0 if (sc->sc_arpcom.ac_if.if_bpf) bpf_mtap(sc->sc_arpcom.ac_if.if_bpf, m0); #endif m_freem(m0); sc->sc_arpcom.ac_if.if_opackets++; /* move to interrupt? */ sc->sc_intctl |= MSK_TX_EMPTY | MSK_TX; } smc->b2.msk = sc->sc_intctl; #ifdef ESDEBUG while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { printf("%s: esstart++++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, smc->b2.bsr); smc->b2.bsr = BSR_BANK2; } if (--sc->sc_smcbusy) { printf("%s: esstart busy on exit\n", sc->sc_dev.dv_xname); panic("esstart busy on exit"); } #endif } int esioctl(ifp, command, data) register struct ifnet *ifp; u_long command; caddr_t data; { struct es_softc *sc = ifp->if_softc; register struct ifaddr *ifa = (struct ifaddr *)data; struct ifreq *ifr = (struct ifreq *)data; int s, error = 0; s = splnet(); if ((error = ether_ioctl(ifp, &sc->sc_arpcom, command, data)) > 0) { splx(s); return error; } switch (command) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: esinit(sc); arp_ifinit(&sc->sc_arpcom, ifa); break; #endif #ifdef NS case AF_NS: { register struct ns_addr *ina = &IA_SNS(ifa)->sns_addr; if (ns_nullhost(*ina)) ina->x_host = *(union ns_host *)(sc->sc_arpcom.ac_enaddr); else bcopy(ina->x_host.c_host, sc->sc_arpcom.ac_enaddr, sizeof(sc->sc_arpcom.ac_enaddr)); /* Set new address. */ esinit(sc); break; } #endif default: esinit(sc); break; } break; case SIOCSIFFLAGS: /* * If interface is marked down and it is running, then stop it */ if ((ifp->if_flags & IFF_UP) == 0 && (ifp->if_flags & IFF_RUNNING) != 0) { /* * If interface is marked down and it is running, then * stop it. */ esstop(sc); ifp->if_flags &= ~IFF_RUNNING; } else if ((ifp->if_flags & IFF_UP) != 0 && (ifp->if_flags & IFF_RUNNING) == 0) { /* * If interface is marked up and it is stopped, then * start it. */ esinit(sc); } else { /* * Reset the interface to pick up changes in any other * flags that affect hardware registers. */ esstop(sc); esinit(sc); } #ifdef ESDEBUG if (ifp->if_flags & IFF_DEBUG) esdebug = sc->sc_debug = 1; else esdebug = sc->sc_debug = 0; #endif break; case SIOCADDMULTI: case SIOCDELMULTI: error = (command == SIOCADDMULTI) ? ether_addmulti(ifr, &sc->sc_arpcom) : ether_delmulti(ifr, &sc->sc_arpcom); if (error == ENETRESET) { /* * Multicast list has changed; set the hardware filter * accordingly. */ /* XXX */ error = 0; } break; default: error = EINVAL; } splx(s); return (error); } void esreset(sc) struct es_softc *sc; { int s; s = splnet(); esstop(sc); esinit(sc); splx(s); } void eswatchdog(ifp) struct ifnet *ifp; { struct es_softc *sc = ifp->if_softc; log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname); ++sc->sc_arpcom.ac_if.if_oerrors; esreset(sc); }