/* $OpenBSD: sbic.c,v 1.11 2000/11/10 15:33:04 provos Exp $ */ /* $NetBSD: sbic.c,v 1.28 1996/10/13 03:07:29 christos Exp $ */ /* * Copyright (c) 1994 Christian E. Hopps * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Van Jacobson of Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)scsi.c 7.5 (Berkeley) 5/4/91 */ /* * AMIGA AMD 33C93 scsi adaptor driver */ #include #include #include #include /* For hz */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* These are for bounce buffers */ #include #include #include /* Since I can't find this in any other header files */ #define SCSI_PHASE(reg) (reg&0x07) /* * SCSI delays * In u-seconds, primarily for state changes on the SPC. */ #define SBIC_CMD_WAIT 50000 /* wait per step of 'immediate' cmds */ #define SBIC_DATA_WAIT 50000 /* wait per data in/out step */ #define SBIC_INIT_WAIT 50000 /* wait per step (both) during init */ #define b_cylin b_resid #define SBIC_WAIT(regs, until, timeo) sbicwait(regs, until, timeo, __LINE__) int sbicicmd __P((struct sbic_softc *, int, int, void *, int, void *, int)); int sbicgo __P((struct sbic_softc *, struct scsi_xfer *)); int sbicdmaok __P((struct sbic_softc *, struct scsi_xfer *)); int sbicwait __P((sbic_regmap_p, char, int , int)); int sbiccheckdmap __P((void *, u_long, u_long)); int sbicselectbus __P((struct sbic_softc *, sbic_regmap_p, u_char, u_char, u_char)); int sbicxfstart __P((sbic_regmap_p, int, u_char, int)); int sbicxfout __P((sbic_regmap_p regs, int, void *, int)); int sbicfromscsiperiod __P((struct sbic_softc *, sbic_regmap_p, int)); int sbictoscsiperiod __P((struct sbic_softc *, sbic_regmap_p, int)); int sbicpoll __P((struct sbic_softc *)); int sbicnextstate __P((struct sbic_softc *, u_char, u_char)); int sbicmsgin __P((struct sbic_softc *)); int sbicxfin __P((sbic_regmap_p regs, int, void *)); int sbicabort __P((struct sbic_softc *, sbic_regmap_p, char *)); void sbicxfdone __P((struct sbic_softc *, sbic_regmap_p, int)); void sbicerror __P((struct sbic_softc *, sbic_regmap_p, u_char)); void sbicstart __P((struct sbic_softc *)); void sbicreset __P((struct sbic_softc *)); void sbic_scsidone __P((struct sbic_acb *, int)); void sbic_sched __P((struct sbic_softc *)); void sbic_save_ptrs __P((struct sbic_softc *, sbic_regmap_p,int,int)); void sbic_load_ptrs __P((struct sbic_softc *, sbic_regmap_p,int,int)); #ifdef DEBUG void sbicdumpstate __P((void)); void sbic_dump_acb __P((struct sbic_acb *)); #endif /* * Synch xfer parameters, and timing conversions */ int sbic_min_period = SBIC_SYN_MIN_PERIOD; /* in cycles = f(ICLK,FSn) */ int sbic_max_offset = SBIC_SYN_MAX_OFFSET; /* pure number */ int sbic_cmd_wait = SBIC_CMD_WAIT; int sbic_data_wait = SBIC_DATA_WAIT; int sbic_init_wait = SBIC_INIT_WAIT; /* * was broken before.. now if you want this you get it for all drives * on sbic controllers. */ u_char sbic_inhibit_sync[8]; int sbic_enable_reselect = 1; int sbic_clock_override = 0; int sbic_no_dma = 0; int sbic_parallel_operations = 1; #ifdef DEBUG sbic_regmap_p debug_sbic_regs; int sbicdma_ops = 0; /* total DMA operations */ int sbicdma_bounces = 0; /* number operations using bounce buffer */ int sbicdma_hits = 0; /* number of DMA chains that were contiguous */ int sbicdma_misses = 0; /* number of DMA chains that were not contiguous */ int sbicdma_saves = 0; #define QPRINTF(a) if (sbic_debug > 1) printf a int sbic_debug = 0; int sync_debug = 0; int sbic_dma_debug = 0; int reselect_debug = 0; int report_sense = 0; int data_pointer_debug = 0; u_char debug_asr, debug_csr, routine; void sbictimeout __P((struct sbic_softc *dev)); #define CSR_TRACE_SIZE 32 #if CSR_TRACE_SIZE #define CSR_TRACE(w,c,a,x) do { \ int s = splbio(); \ csr_trace[csr_traceptr].whr = (w); csr_trace[csr_traceptr].csr = (c); \ csr_trace[csr_traceptr].asr = (a); csr_trace[csr_traceptr].xtn = (x); \ dma_cachectl((caddr_t)&csr_trace[csr_traceptr], sizeof(csr_trace[0])); \ csr_traceptr = (csr_traceptr + 1) & (CSR_TRACE_SIZE - 1); \ /* dma_cachectl((caddr_t)&csr_traceptr, sizeof(csr_traceptr));*/ \ splx(s); \ } while (0) int csr_traceptr; int csr_tracesize = CSR_TRACE_SIZE; struct { u_char whr; u_char csr; u_char asr; u_char xtn; } csr_trace[CSR_TRACE_SIZE]; #else #define CSR_TRACE(w,c,a,x) #endif #define SBIC_TRACE_SIZE 0 #if SBIC_TRACE_SIZE #define SBIC_TRACE(dev) do { \ int s = splbio(); \ sbic_trace[sbic_traceptr].sp = &s; \ sbic_trace[sbic_traceptr].line = __LINE__; \ sbic_trace[sbic_traceptr].sr = s; \ sbic_trace[sbic_traceptr].csr = csr_traceptr; \ dma_cachectl(&sbic_trace[sbic_traceptr], sizeof(sbic_trace[0])); \ sbic_traceptr = (sbic_traceptr + 1) & (SBIC_TRACE_SIZE - 1); \ dma_cachectl(&sbic_traceptr, sizeof(sbic_traceptr)); \ if (dev) dma_cachectl(dev, sizeof(*dev)); \ splx(s); \ } while (0) int sbic_traceptr; int sbic_tracesize = SBIC_TRACE_SIZE; struct { void *sp; u_short line; u_short sr; int csr; } sbic_trace[SBIC_TRACE_SIZE]; #else #define SBIC_TRACE(dev) #endif #else /* DEBUG */ #define QPRINTF(a) #define CSR_TRACE(w,c,a,x) #define SBIC_TRACE(dev) #endif /* DEBUG */ /* * default minphys routine for sbic based controllers */ void sbic_minphys(bp) struct buf *bp; { /* * No max transfer at this level. */ minphys(bp); } /* * Save DMA pointers. Take into account partial transfer. Shut down DMA. */ void sbic_save_ptrs(dev, regs, target, lun) struct sbic_softc *dev; sbic_regmap_p regs; int target, lun; { int count, asr, s; struct sbic_acb* acb; SBIC_TRACE(dev); if( !dev->sc_cur ) return; if( !(dev->sc_flags & SBICF_INDMA) ) return; /* DMA not active */ s = splbio(); acb = dev->sc_nexus; count = -1; do { GET_SBIC_asr(regs, asr); if( asr & SBIC_ASR_DBR ) { printf("sbic_save_ptrs: asr %02x canceled!\n", asr); splx(s); SBIC_TRACE(dev); return; } } while( asr & (SBIC_ASR_BSY|SBIC_ASR_CIP) ); /* Save important state */ /* must be done before dmastop */ acb->sc_dmacmd = dev->sc_dmacmd; SBIC_TC_GET(regs, count); /* Shut down DMA ====CAREFUL==== */ dev->sc_dmastop(dev); dev->sc_flags &= ~SBICF_INDMA; SBIC_TC_PUT(regs, 0); #ifdef DEBUG if(!count && sbic_debug) printf("%dcount0",target); if(data_pointer_debug == -1) printf("SBIC saving target %d data pointers from (%p,%x)%xASR:%02x", target, dev->sc_cur->dc_addr, dev->sc_cur->dc_count, acb->sc_dmacmd, asr); #endif /* Fixup partial xfers */ acb->sc_kv.dc_addr += (dev->sc_tcnt - count); acb->sc_kv.dc_count -= (dev->sc_tcnt - count); acb->sc_pa.dc_addr += (dev->sc_tcnt - count); acb->sc_pa.dc_count -= ((dev->sc_tcnt - count)>>1); acb->sc_tcnt = dev->sc_tcnt = count; #ifdef DEBUG if(data_pointer_debug) printf(" at (%p,%x):%x\n", dev->sc_cur->dc_addr, dev->sc_cur->dc_count,count); sbicdma_saves++; #endif splx(s); SBIC_TRACE(dev); } /* * DOES NOT RESTART DMA!!! */ void sbic_load_ptrs(dev, regs, target, lun) struct sbic_softc *dev; sbic_regmap_p regs; int target, lun; { int s, count; char* vaddr, * paddr; struct sbic_acb *acb; SBIC_TRACE(dev); acb = dev->sc_nexus; if( !acb->sc_kv.dc_count ) { /* No data to xfer */ SBIC_TRACE(dev); return; } s = splbio(); dev->sc_last = dev->sc_cur = &acb->sc_pa; dev->sc_tcnt = acb->sc_tcnt; dev->sc_dmacmd = acb->sc_dmacmd; #ifdef DEBUG sbicdma_ops++; #endif if( !dev->sc_tcnt ) { /* sc_tcnt == 0 implies end of segment */ /* do kvm to pa mappings */ paddr = acb->sc_pa.dc_addr = (char *) kvtop(acb->sc_kv.dc_addr); vaddr = acb->sc_kv.dc_addr; count = acb->sc_kv.dc_count; for(count = (NBPG - ((int)vaddr & PGOFSET)); count < acb->sc_kv.dc_count && (char*)kvtop(vaddr + count + 4) == paddr + count + 4; count += NBPG); /* If it's all contiguous... */ if(count > acb->sc_kv.dc_count ) { count = acb->sc_kv.dc_count; #ifdef DEBUG sbicdma_hits++; #endif } else { #ifdef DEBUG sbicdma_misses++; #endif } acb->sc_tcnt = count; acb->sc_pa.dc_count = count >> 1; #ifdef DEBUG if(data_pointer_debug) printf("DMA recalc:kv(%p,%x)pa(%p,%lx)\n", acb->sc_kv.dc_addr, acb->sc_kv.dc_count, acb->sc_pa.dc_addr, acb->sc_tcnt); #endif } splx(s); #ifdef DEBUG if(data_pointer_debug) printf("SBIC restoring target %d data pointers at (%p,%x)%x\n", target, dev->sc_cur->dc_addr, dev->sc_cur->dc_count, dev->sc_dmacmd); #endif SBIC_TRACE(dev); } /* * used by specific sbic controller * * it appears that the higher level code does nothing with LUN's * so I will too. I could plug it in, however so could they * in scsi_scsi_cmd(). */ int sbic_scsicmd(xs) struct scsi_xfer *xs; { struct sbic_acb *acb; struct sbic_softc *dev; struct scsi_link *slp; int flags, s, stat; slp = xs->sc_link; dev = slp->adapter_softc; SBIC_TRACE(dev); flags = xs->flags; if (flags & SCSI_DATA_UIO) panic("sbic: scsi data uio requested"); if (dev->sc_nexus && flags & SCSI_POLL) panic("sbic_scsicmd: busy"); if (slp->target == slp->adapter_target) return ESCAPE_NOT_SUPPORTED; s = splbio(); acb = dev->free_list.tqh_first; if (acb) TAILQ_REMOVE(&dev->free_list, acb, chain); splx(s); if (acb == NULL) { #ifdef DEBUG printf("sbic_scsicmd: unable to queue request for target %d\n", slp->target); #ifdef DDB Debugger(); #endif #endif xs->error = XS_DRIVER_STUFFUP; SBIC_TRACE(dev); return(TRY_AGAIN_LATER); } acb->flags = ACB_ACTIVE; if (flags & SCSI_DATA_IN) acb->flags |= ACB_DATAIN; acb->xs = xs; bcopy(xs->cmd, &acb->cmd, xs->cmdlen); acb->clen = xs->cmdlen; acb->sc_kv.dc_addr = xs->data; acb->sc_kv.dc_count = xs->datalen; acb->pa_addr = xs->data ? (char *)kvtop(xs->data) : 0; /* XXXX check */ if (flags & SCSI_POLL) { s = splbio(); /* * This has major side effects -- it locks up the machine */ dev->sc_flags |= SBICF_ICMD; do { while(dev->sc_nexus) sbicpoll(dev); dev->sc_nexus = acb; dev->sc_stat[0] = -1; dev->sc_xs = xs; dev->target = slp->target; dev->lun = slp->lun; stat = sbicicmd(dev, slp->target, slp->lun, &acb->cmd, acb->clen, acb->sc_kv.dc_addr, acb->sc_kv.dc_count); } while (dev->sc_nexus != acb); sbic_scsidone(acb, stat); splx(s); SBIC_TRACE(dev); return(COMPLETE); } s = splbio(); TAILQ_INSERT_TAIL(&dev->ready_list, acb, chain); if (dev->sc_nexus) { splx(s); SBIC_TRACE(dev); return(SUCCESSFULLY_QUEUED); } /* * nothing is active, try to start it now. */ sbic_sched(dev); splx(s); SBIC_TRACE(dev); /* TODO: add sbic_poll to do SCSI_POLL operations */ #if 0 if (flags & SCSI_POLL) return(COMPLETE); #endif return(SUCCESSFULLY_QUEUED); } /* * attempt to start the next available command */ void sbic_sched(dev) struct sbic_softc *dev; { struct scsi_xfer *xs; struct scsi_link *slp; struct sbic_acb *acb; int flags, /*phase,*/ stat, i; SBIC_TRACE(dev); if (dev->sc_nexus) return; /* a command is current active */ SBIC_TRACE(dev); for (acb = dev->ready_list.tqh_first; acb; acb = acb->chain.tqe_next) { slp = acb->xs->sc_link; i = slp->target; if (!(dev->sc_tinfo[i].lubusy & (1 << slp->lun))) { struct sbic_tinfo *ti = &dev->sc_tinfo[i]; TAILQ_REMOVE(&dev->ready_list, acb, chain); dev->sc_nexus = acb; slp = acb->xs->sc_link; ti = &dev->sc_tinfo[slp->target]; ti->lubusy |= (1 << slp->lun); acb->sc_pa.dc_addr = acb->pa_addr; /* XXXX check */ break; } } SBIC_TRACE(dev); if (acb == NULL) return; /* did not find an available command */ dev->sc_xs = xs = acb->xs; slp = xs->sc_link; flags = xs->flags; if (flags & SCSI_RESET) sbicreset(dev); #ifdef DEBUG if( data_pointer_debug > 1 ) printf("sbic_sched(%d,%d)\n",slp->target,slp->lun); #endif dev->sc_stat[0] = -1; dev->target = slp->target; dev->lun = slp->lun; if ( flags & SCSI_POLL || ( !sbic_parallel_operations && (/*phase == STATUS_PHASE ||*/ sbicdmaok(dev, xs) == 0) ) ) stat = sbicicmd(dev, slp->target, slp->lun, &acb->cmd, acb->clen, acb->sc_kv.dc_addr, acb->sc_kv.dc_count); else if (sbicgo(dev, xs) == 0) { SBIC_TRACE(dev); return; } else stat = dev->sc_stat[0]; sbic_scsidone(acb, stat); SBIC_TRACE(dev); } void sbic_scsidone(acb, stat) struct sbic_acb *acb; int stat; { struct scsi_xfer *xs; struct scsi_link *slp; struct sbic_softc *dev; int dosched = 0; xs = acb->xs; slp = xs->sc_link; dev = slp->adapter_softc; SBIC_TRACE(dev); #ifdef DIAGNOSTIC if (acb == NULL || xs == NULL) { printf("sbic_scsidone -- (%d,%d) no scsi_xfer\n", dev->target, dev->lun); #ifdef DDB Debugger(); #endif return; } #endif /* * is this right? */ xs->status = stat; #ifdef DEBUG if( data_pointer_debug > 1 ) printf("scsidone: (%d,%d)->(%d,%d)%02x\n", slp->target, slp->lun, dev->target, dev->lun, stat); if( xs->sc_link->target == dev->sc_link.adapter_target ) panic("target == hostid"); #endif if (xs->error == XS_NOERROR && !(acb->flags & ACB_CHKSENSE)) { if (stat == SCSI_CHECK) { /* Schedule a REQUEST SENSE */ struct scsi_sense *ss = (void *)&acb->cmd; #ifdef DEBUG if (report_sense) printf("sbic_scsidone: autosense %02x targ %d lun %d", acb->cmd.opcode, slp->target, slp->lun); #endif bzero(ss, sizeof(*ss)); ss->opcode = REQUEST_SENSE; ss->byte2 = slp->lun << 5; ss->length = sizeof(struct scsi_sense_data); acb->clen = sizeof(*ss); acb->sc_kv.dc_addr = (char *)&xs->sense; acb->sc_kv.dc_count = sizeof(struct scsi_sense_data); acb->pa_addr = (char *)kvtop((u_char *)&xs->sense); /* XXX check */ acb->flags = ACB_ACTIVE | ACB_CHKSENSE | ACB_DATAIN; TAILQ_INSERT_HEAD(&dev->ready_list, acb, chain); dev->sc_tinfo[slp->target].lubusy &= ~(1 << slp->lun); dev->sc_tinfo[slp->target].senses++; if (dev->sc_nexus == acb) { dev->sc_nexus = NULL; dev->sc_xs = NULL; sbic_sched(dev); } SBIC_TRACE(dev); return; } } if (xs->error == XS_NOERROR && (acb->flags & ACB_CHKSENSE)) { xs->error = XS_SENSE; #ifdef DEBUG if (report_sense) printf(" => %02x %02x\n", xs->sense.flags, xs->sense.extra_bytes[3]); #endif } else { xs->resid = 0; /* XXXX */ } #if whataboutthisone case SCSI_BUSY: xs->error = XS_BUSY; break; #endif xs->flags |= ITSDONE; /* * Remove the ACB from whatever queue it's on. We have to do a bit of * a hack to figure out which queue it's on. Note that it is *not* * necessary to cdr down the ready queue, but we must cdr down the * nexus queue and see if it's there, so we can mark the unit as no * longer busy. This code is sickening, but it works. */ if (acb == dev->sc_nexus) { dev->sc_nexus = NULL; dev->sc_xs = NULL; dev->sc_tinfo[slp->target].lubusy &= ~(1<lun); if (dev->ready_list.tqh_first) dosched = 1; /* start next command */ } else if (dev->ready_list.tqh_last == &acb->chain.tqe_next) { TAILQ_REMOVE(&dev->ready_list, acb, chain); } else { register struct sbic_acb *acb2; for (acb2 = dev->nexus_list.tqh_first; acb2; acb2 = acb2->chain.tqe_next) { if (acb2 == acb) { TAILQ_REMOVE(&dev->nexus_list, acb, chain); dev->sc_tinfo[slp->target].lubusy &= ~(1<lun); break; } } if (acb2) ; else if (acb->chain.tqe_next) { TAILQ_REMOVE(&dev->ready_list, acb, chain); } else { printf("%s: can't find matching acb\n", dev->sc_dev.dv_xname); #ifdef DDB Debugger(); #endif } } /* Put it on the free list. */ acb->flags = ACB_FREE; TAILQ_INSERT_HEAD(&dev->free_list, acb, chain); dev->sc_tinfo[slp->target].cmds++; scsi_done(xs); if (dosched) sbic_sched(dev); SBIC_TRACE(dev); } int sbicdmaok(dev, xs) struct sbic_softc *dev; struct scsi_xfer *xs; { if (sbic_no_dma || xs->datalen & 0x1 || (u_int)xs->data & 0x3) return(0); /* * controller supports dma to any addresses? */ else if ((dev->sc_flags & SBICF_BADDMA) == 0) return(1); /* * this address is ok for dma? */ else if (sbiccheckdmap(xs->data, xs->datalen, dev->sc_dmamask) == 0) return(1); /* * we have a bounce buffer? */ else if (dev->sc_tinfo[xs->sc_link->target].bounce) return(1); /* * try to get one */ else if ((dev->sc_tinfo[xs->sc_link->target].bounce = (char *)alloc_z2mem(MAXPHYS))) { if (isztwomem(dev->sc_tinfo[xs->sc_link->target].bounce)) printf("alloc ZII target %d bounce pa 0x%x\n", xs->sc_link->target, kvtop(dev->sc_tinfo[xs->sc_link->target].bounce)); else if (dev->sc_tinfo[xs->sc_link->target].bounce) printf("alloc CHIP target %d bounce pa 0x%p\n", xs->sc_link->target, PREP_DMA_MEM(dev->sc_tinfo[xs->sc_link->target].bounce)); return(1); } return(0); } int sbicwait(regs, until, timeo, line) sbic_regmap_p regs; char until; int timeo; int line; { u_char val; int csr; SBIC_TRACE((struct sbic_softc *)0); if (timeo == 0) timeo = 1000000; /* some large value.. */ GET_SBIC_asr(regs,val); while ((val & until) == 0) { if (timeo-- == 0) { GET_SBIC_csr(regs, csr); printf("sbicwait TIMEO @%d with asr=x%x csr=x%x\n", line, val, csr); #if defined(DDB) && defined(DEBUG) Debugger(); #endif return(val); /* Maybe I should abort */ break; } DELAY(1); GET_SBIC_asr(regs,val); } SBIC_TRACE((struct sbic_softc *)0); return(val); } int sbicabort(dev, regs, where) struct sbic_softc *dev; sbic_regmap_p regs; char *where; { u_char csr, asr; GET_SBIC_asr(regs, asr); GET_SBIC_csr(regs, csr); printf ("%s: abort %s: csr = 0x%02x, asr = 0x%02x\n", dev->sc_dev.dv_xname, where, csr, asr); #if 0 /* Clean up running command */ if (dev->sc_nexus != NULL) { dev->sc_nexus->xs->error = XS_DRIVER_STUFFUP; sbic_scsidone(dev->sc_nexus, dev->sc_stat[0]); } while (acb = dev->nexus_list.tqh_first) { acb->xs->error = XS_DRIVER_STUFFUP; sbic_scsidone(acb, -1 /*acb->stat[0]*/); } #endif /* Clean up chip itself */ if (dev->sc_flags & SBICF_SELECTED) { while( asr & SBIC_ASR_DBR ) { /* sbic is jammed w/data. need to clear it */ /* But we don't know what direction it needs to go */ GET_SBIC_data(regs, asr); printf("%s: abort %s: clearing data buffer 0x%02x\n", dev->sc_dev.dv_xname, where, asr); GET_SBIC_asr(regs, asr); if( asr & SBIC_ASR_DBR ) /* Not the read direction, then */ SET_SBIC_data(regs, asr); GET_SBIC_asr(regs, asr); } WAIT_CIP(regs); printf("%s: sbicabort - sending ABORT command\n", dev->sc_dev.dv_xname); SET_SBIC_cmd(regs, SBIC_CMD_ABORT); WAIT_CIP(regs); GET_SBIC_asr(regs, asr); if (asr & (SBIC_ASR_BSY|SBIC_ASR_LCI)) { /* ok, get more drastic.. */ printf("%s: sbicabort - asr %x, trying to reset\n", dev->sc_dev.dv_xname, asr); sbicreset(dev); dev->sc_flags &= ~SBICF_SELECTED; return -1; } printf("%s: sbicabort - sending DISC command\n", dev->sc_dev.dv_xname); SET_SBIC_cmd(regs, SBIC_CMD_DISC); do { asr = SBIC_WAIT (regs, SBIC_ASR_INT, 0); GET_SBIC_csr (regs, csr); CSR_TRACE('a',csr,asr,0); } while ((csr != SBIC_CSR_DISC) && (csr != SBIC_CSR_DISC_1) && (csr != SBIC_CSR_CMD_INVALID)); /* lets just hope it worked.. */ dev->sc_flags &= ~SBICF_SELECTED; } return -1; } /* * Initialize driver-private structures */ void sbicinit(dev) struct sbic_softc *dev; { sbic_regmap_p regs; u_int i; struct sbic_acb *acb; u_int inhibit_sync; extern u_long scsi_nosync; extern int shift_nosync; regs = dev->sc_sbicp; if ((dev->sc_flags & SBICF_ALIVE) == 0) { TAILQ_INIT(&dev->ready_list); TAILQ_INIT(&dev->nexus_list); TAILQ_INIT(&dev->free_list); dev->sc_nexus = NULL; dev->sc_xs = NULL; acb = dev->sc_acb; bzero(acb, sizeof(dev->sc_acb)); for (i = 0; i < sizeof(dev->sc_acb) / sizeof(*acb); i++) { TAILQ_INSERT_TAIL(&dev->free_list, acb, chain); acb++; } bzero(dev->sc_tinfo, sizeof(dev->sc_tinfo)); #ifdef DEBUG /* make sure timeout is really not needed */ timeout((void *)sbictimeout, dev, 30 * hz); #endif } else panic("sbic: reinitializing driver!"); dev->sc_flags |= SBICF_ALIVE; dev->sc_flags &= ~SBICF_SELECTED; /* initialize inhibit array */ if (scsi_nosync) { inhibit_sync = (scsi_nosync >> shift_nosync) & 0xff; shift_nosync += 8; #ifdef DEBUG if (inhibit_sync) printf("%s: Inhibiting synchronous transfer %02x\n", dev->sc_dev.dv_xname, inhibit_sync); #endif for (i = 0; i < 8; ++i) if (inhibit_sync & (1 << i)) sbic_inhibit_sync[i] = 1; } sbicreset(dev); } void sbicreset(dev) struct sbic_softc *dev; { sbic_regmap_p regs; u_int my_id, s; u_char csr; #if 0 u_int i; struct sbic_acb *acb; #endif regs = dev->sc_sbicp; #if 0 if (dev->sc_flags & SBICF_ALIVE) { SET_SBIC_cmd(regs, SBIC_CMD_ABORT); WAIT_CIP(regs); } #else SET_SBIC_cmd(regs, SBIC_CMD_ABORT); WAIT_CIP(regs); #endif s = splbio(); my_id = dev->sc_link.adapter_target & SBIC_ID_MASK; /* Enable advanced mode */ my_id |= SBIC_ID_EAF /*| SBIC_ID_EHP*/ ; SET_SBIC_myid(regs, my_id); /* * Disable interrupts (in dmainit) then reset the chip */ SET_SBIC_cmd(regs, SBIC_CMD_RESET); DELAY(25); SBIC_WAIT(regs, SBIC_ASR_INT, 0); GET_SBIC_csr(regs, csr); /* clears interrupt also */ if (dev->sc_clkfreq < 110) my_id |= SBIC_ID_FS_8_10; else if (dev->sc_clkfreq < 160) my_id |= SBIC_ID_FS_12_15; else if (dev->sc_clkfreq < 210) my_id |= SBIC_ID_FS_16_20; SET_SBIC_myid(regs, my_id); /* * Set up various chip parameters */ SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI /* | SBIC_CTL_HSP */ | SBIC_MACHINE_DMA_MODE); /* * don't allow (re)selection (SBIC_RID_ES) * until we can handle target mode!! */ SET_SBIC_rselid(regs, SBIC_RID_ER); SET_SBIC_syn(regs, 0); /* asynch for now */ /* * anything else was zeroed by reset */ splx(s); #if 0 if ((dev->sc_flags & SBICF_ALIVE) == 0) { TAILQ_INIT(&dev->ready_list); TAILQ_INIT(&dev->nexus_list); TAILQ_INIT(&dev->free_list); dev->sc_nexus = NULL; dev->sc_xs = NULL; acb = dev->sc_acb; bzero(acb, sizeof(dev->sc_acb)); for (i = 0; i < sizeof(dev->sc_acb) / sizeof(*acb); i++) { TAILQ_INSERT_TAIL(&dev->free_list, acb, chain); acb++; } bzero(dev->sc_tinfo, sizeof(dev->sc_tinfo)); } else { if (dev->sc_nexus != NULL) { dev->sc_nexus->xs->error = XS_DRIVER_STUFFUP; sbic_scsidone(dev->sc_nexus, dev->sc_stat[0]); } while (acb = dev->nexus_list.tqh_first) { acb->xs->error = XS_DRIVER_STUFFUP; sbic_scsidone(acb, -1 /*acb->stat[0]*/); } } dev->sc_flags |= SBICF_ALIVE; #endif dev->sc_flags &= ~SBICF_SELECTED; } void sbicerror(dev, regs, csr) struct sbic_softc *dev; sbic_regmap_p regs; u_char csr; { struct scsi_xfer *xs; xs = dev->sc_xs; #ifdef DIAGNOSTIC if (xs == NULL) panic("sbicerror"); #endif if (xs->flags & SCSI_SILENT) return; printf("%s: ", dev->sc_dev.dv_xname); printf("csr == 0x%02x\n", csr); /* XXX */ } /* * select the bus, return when selected or error. */ int sbicselectbus(dev, regs, target, lun, our_addr) struct sbic_softc *dev; sbic_regmap_p regs; u_char target, lun, our_addr; { u_char asr, csr, id; SBIC_TRACE(dev); QPRINTF(("sbicselectbus %d\n", target)); /* * if we're already selected, return (XXXX panic maybe?) */ if (dev->sc_flags & SBICF_SELECTED) { SBIC_TRACE(dev); return(1); } /* * issue select */ SBIC_TC_PUT(regs, 0); SET_SBIC_selid(regs, target); SET_SBIC_timeo(regs, SBIC_TIMEOUT(250,dev->sc_clkfreq)); /* * set sync or async */ if (dev->sc_sync[target].state == SYNC_DONE) SET_SBIC_syn(regs, SBIC_SYN (dev->sc_sync[target].offset, dev->sc_sync[target].period)); else SET_SBIC_syn(regs, SBIC_SYN (0, sbic_min_period)); GET_SBIC_asr(regs, asr); if( asr & (SBIC_ASR_INT|SBIC_ASR_BSY) ) { /* This means we got ourselves reselected upon */ /* printf("sbicselectbus: INT/BSY asr %02x\n", asr);*/ #ifdef DDB /* Debugger();*/ #endif SBIC_TRACE(dev); return 1; } SET_SBIC_cmd(regs, SBIC_CMD_SEL_ATN); /* * wait for select (merged from separate function may need * cleanup) */ WAIT_CIP(regs); do { asr = SBIC_WAIT(regs, SBIC_ASR_INT | SBIC_ASR_LCI, 0); if (asr & SBIC_ASR_LCI) { #ifdef DEBUG if (reselect_debug) printf("sbicselectbus: late LCI asr %02x\n", asr); #endif SBIC_TRACE(dev); return 1; } GET_SBIC_csr (regs, csr); CSR_TRACE('s',csr,asr,target); QPRINTF(("%02x ", csr)); if( csr == SBIC_CSR_RSLT_NI || csr == SBIC_CSR_RSLT_IFY) { #ifdef DEBUG if(reselect_debug) printf("sbicselectbus: reselected asr %02x\n", asr); #endif /* We need to handle this now so we don't lock up later */ sbicnextstate(dev, csr, asr); SBIC_TRACE(dev); return 1; } if( csr == SBIC_CSR_SLT || csr == SBIC_CSR_SLT_ATN) { panic("sbicselectbus: target issued select!"); return 1; } } while (csr != (SBIC_CSR_MIS_2|MESG_OUT_PHASE) && csr != (SBIC_CSR_MIS_2|CMD_PHASE) && csr != SBIC_CSR_SEL_TIMEO); /* Enable (or not) reselection */ if(!sbic_enable_reselect && dev->nexus_list.tqh_first == NULL) SET_SBIC_rselid (regs, 0); else SET_SBIC_rselid (regs, SBIC_RID_ER); if (csr == (SBIC_CSR_MIS_2|CMD_PHASE)) { dev->sc_flags |= SBICF_SELECTED; /* device ignored ATN */ GET_SBIC_selid(regs, id); dev->target = id; GET_SBIC_tlun(regs,dev->lun); if( dev->lun & SBIC_TLUN_VALID ) dev->lun &= SBIC_TLUN_MASK; else dev->lun = lun; } else if (csr == (SBIC_CSR_MIS_2|MESG_OUT_PHASE)) { /* * Send identify message * (SCSI-2 requires an identify msg (?)) */ GET_SBIC_selid(regs, id); dev->target = id; GET_SBIC_tlun(regs,dev->lun); if( dev->lun & SBIC_TLUN_VALID ) dev->lun &= SBIC_TLUN_MASK; else dev->lun = lun; /* * handle drives that don't want to be asked * whether to go sync at all. */ if (sbic_inhibit_sync[id] && dev->sc_sync[id].state == SYNC_START) { #ifdef DEBUG if (sync_debug) printf("Forcing target %d asynchronous.\n", id); #endif dev->sc_sync[id].offset = 0; dev->sc_sync[id].period = sbic_min_period; dev->sc_sync[id].state = SYNC_DONE; } if (dev->sc_sync[id].state != SYNC_START){ if( dev->sc_xs->flags & SCSI_POLL || (dev->sc_flags & SBICF_ICMD) || !sbic_enable_reselect ) SEND_BYTE (regs, MSG_IDENTIFY | lun); else SEND_BYTE (regs, MSG_IDENTIFY_DR | lun); } else { /* * try to initiate a sync transfer. * So compose the sync message we're going * to send to the target */ #ifdef DEBUG if (sync_debug) printf("Sending sync request to target %d ... ", id); #endif /* * setup scsi message sync message request */ dev->sc_msg[0] = MSG_IDENTIFY | lun; dev->sc_msg[1] = MSG_EXT_MESSAGE; dev->sc_msg[2] = 3; dev->sc_msg[3] = MSG_SYNC_REQ; dev->sc_msg[4] = sbictoscsiperiod(dev, regs, sbic_min_period); dev->sc_msg[5] = sbic_max_offset; if (sbicxfstart(regs, 6, MESG_OUT_PHASE, sbic_cmd_wait)) sbicxfout(regs, 6, dev->sc_msg, MESG_OUT_PHASE); dev->sc_sync[id].state = SYNC_SENT; #ifdef DEBUG if (sync_debug) printf ("sent\n"); #endif } asr = SBIC_WAIT (regs, SBIC_ASR_INT, 0); GET_SBIC_csr (regs, csr); CSR_TRACE('y',csr,asr,target); QPRINTF(("[%02x]", csr)); #ifdef DEBUG if (sync_debug && dev->sc_sync[id].state == SYNC_SENT) printf("csr-result of last msgout: 0x%x\n", csr); #endif if (csr != SBIC_CSR_SEL_TIMEO) dev->sc_flags |= SBICF_SELECTED; } if (csr == SBIC_CSR_SEL_TIMEO) dev->sc_xs->error = XS_SELTIMEOUT; QPRINTF(("\n")); SBIC_TRACE(dev); return(csr == SBIC_CSR_SEL_TIMEO); } int sbicxfstart(regs, len, phase, wait) sbic_regmap_p regs; int len, wait; u_char phase; { u_char id; switch (phase) { case DATA_IN_PHASE: case MESG_IN_PHASE: GET_SBIC_selid (regs, id); id |= SBIC_SID_FROM_SCSI; SET_SBIC_selid (regs, id); SBIC_TC_PUT (regs, (unsigned)len); break; case DATA_OUT_PHASE: case MESG_OUT_PHASE: case CMD_PHASE: GET_SBIC_selid (regs, id); id &= ~SBIC_SID_FROM_SCSI; SET_SBIC_selid (regs, id); SBIC_TC_PUT (regs, (unsigned)len); break; default: SBIC_TC_PUT (regs, 0); } QPRINTF(("sbicxfstart %d, %d, %d\n", len, phase, wait)); return(1); } int sbicxfout(regs, len, bp, phase) sbic_regmap_p regs; int len; void *bp; int phase; { u_char orig_csr, asr, *buf; int wait; buf = bp; wait = sbic_data_wait; QPRINTF(("sbicxfout {%d} %02x %02x %02x %02x %02x " "%02x %02x %02x %02x %02x\n", len, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], buf[8], buf[9])); GET_SBIC_csr (regs, orig_csr); CSR_TRACE('>',orig_csr,0,0); /* * sigh.. WD-PROTO strikes again.. sending the command in one go * causes the chip to lock up if talking to certain (misbehaving?) * targets. Anyway, this procedure should work for all targets, but * it's slightly slower due to the overhead */ WAIT_CIP (regs); SET_SBIC_cmd (regs, SBIC_CMD_XFER_INFO); for (;len > 0; len--) { GET_SBIC_asr (regs, asr); while ((asr & SBIC_ASR_DBR) == 0) { if ((asr & SBIC_ASR_INT) || --wait < 0) { #ifdef DEBUG if (sbic_debug) printf("sbicxfout fail: l%d i%x w%d\n", len, asr, wait); #endif return (len); } /* DELAY(1);*/ GET_SBIC_asr (regs, asr); } SET_SBIC_data (regs, *buf); buf++; } SBIC_TC_GET(regs, len); QPRINTF(("sbicxfout done %d bytes\n", len)); /* * this leaves with one csr to be read */ return(0); } /* returns # bytes left to read */ int sbicxfin(regs, len, bp) sbic_regmap_p regs; int len; void *bp; { int wait; u_char *obp, *buf; u_char orig_csr, csr, asr; wait = sbic_data_wait; obp = bp; buf = bp; GET_SBIC_csr (regs, orig_csr); CSR_TRACE('<',orig_csr,0,0); QPRINTF(("sbicxfin %d, csr=%02x\n", len, orig_csr)); WAIT_CIP (regs); SET_SBIC_cmd (regs, SBIC_CMD_XFER_INFO); for (;len > 0; len--) { GET_SBIC_asr (regs, asr); if((asr & SBIC_ASR_PE)) { #ifdef DEBUG printf("sbicxfin parity error: l%d i%x w%d\n", len, asr, wait); /* return ((unsigned long)buf - (unsigned long)bp); */ #ifdef DDB Debugger(); #endif #endif } while ((asr & SBIC_ASR_DBR) == 0) { if ((asr & SBIC_ASR_INT) || --wait < 0) { #ifdef DEBUG if (sbic_debug) { QPRINTF(("sbicxfin fail:{%d} %02x %02x %02x %02x %02x %02x " "%02x %02x %02x %02x\n", len, obp[0], obp[1], obp[2], obp[3], obp[4], obp[5], obp[6], obp[7], obp[8], obp[9])); printf("sbicxfin fail: l%d i%x w%d\n", len, asr, wait); } #endif return len; } if( ! asr & SBIC_ASR_BSY ) { GET_SBIC_csr(regs, csr); CSR_TRACE('<',csr,asr,len); QPRINTF(("[CSR%02xASR%02x]", csr, asr)); } /* DELAY(1);*/ GET_SBIC_asr (regs, asr); } GET_SBIC_data (regs, *buf); /* QPRINTF(("asr=%02x, csr=%02x, data=%02x\n", asr, csr, *buf));*/ buf++; } QPRINTF(("sbicxfin {%d} %02x %02x %02x %02x %02x %02x " "%02x %02x %02x %02x\n", len, obp[0], obp[1], obp[2], obp[3], obp[4], obp[5], obp[6], obp[7], obp[8], obp[9])); /* this leaves with one csr to be read */ return len; } /* * SCSI 'immediate' command: issue a command to some SCSI device * and get back an 'immediate' response (i.e., do programmed xfer * to get the response data). 'cbuf' is a buffer containing a scsi * command of length clen bytes. 'buf' is a buffer of length 'len' * bytes for data. The transfer direction is determined by the device * (i.e., by the scsi bus data xfer phase). If 'len' is zero, the * command must supply no data. */ int sbicicmd(dev, target, lun, cbuf, clen, buf, len) struct sbic_softc *dev; void *cbuf, *buf; int clen, len; { sbic_regmap_p regs; u_char phase, csr, asr; int wait, i; struct sbic_acb *acb; #define CSR_LOG_BUF_SIZE 0 #if CSR_LOG_BUF_SIZE int bufptr; int csrbuf[CSR_LOG_BUF_SIZE]; bufptr=0; #endif SBIC_TRACE(dev); regs = dev->sc_sbicp; acb = dev->sc_nexus; /* Make sure pointers are OK */ dev->sc_last = dev->sc_cur = &acb->sc_pa; dev->sc_tcnt = acb->sc_tcnt = 0; acb->sc_pa.dc_count = 0; /* No DMA */ acb->sc_kv.dc_addr = buf; acb->sc_kv.dc_count = len; #ifdef DEBUG routine = 3; debug_sbic_regs = regs; /* store this to allow debug calls */ if( data_pointer_debug > 1 ) printf("sbicicmd(%d,%d):%d\n", target, lun, acb->sc_kv.dc_count); #endif /* * set the sbic into non-DMA mode */ SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI /*| SBIC_CTL_HSP*/); dev->sc_stat[0] = 0xff; dev->sc_msg[0] = 0xff; i = 1; /* pre-load */ /* We're stealing the SCSI bus */ dev->sc_flags |= SBICF_ICMD; do { /* * select the SCSI bus (it's an error if bus isn't free) */ if (!( dev->sc_flags & SBICF_SELECTED ) && sbicselectbus(dev, regs, target, lun, dev->sc_scsiaddr)) { /*printf("sbicicmd trying to select busy bus!\n");*/ dev->sc_flags &= ~SBICF_ICMD; return(-1); } /* * Wait for a phase change (or error) then let the device sequence * us through the various SCSI phases. */ wait = sbic_cmd_wait; asr = GET_SBIC_asr (regs, asr); GET_SBIC_csr (regs, csr); CSR_TRACE('I',csr,asr,target); QPRINTF((">ASR:%02xCSR:%02x<", asr, csr)); #if CSR_LOG_BUF_SIZE csrbuf[bufptr++] = csr; #endif switch (csr) { case SBIC_CSR_S_XFERRED: case SBIC_CSR_DISC: case SBIC_CSR_DISC_1: dev->sc_flags &= ~SBICF_SELECTED; GET_SBIC_cmd_phase (regs, phase); if (phase == 0x60) { GET_SBIC_tlun (regs, dev->sc_stat[0]); i = 0; /* done */ /* break; */ /* Bypass all the state gobldygook */ } else { #ifdef DEBUG if(reselect_debug>1) printf("sbicicmd: handling disconnect\n"); #endif i = SBIC_STATE_DISCONNECT; } break; case SBIC_CSR_XFERRED|CMD_PHASE: case SBIC_CSR_MIS|CMD_PHASE: case SBIC_CSR_MIS_1|CMD_PHASE: case SBIC_CSR_MIS_2|CMD_PHASE: if (sbicxfstart(regs, clen, CMD_PHASE, sbic_cmd_wait)) if (sbicxfout(regs, clen, cbuf, CMD_PHASE)) i = sbicabort(dev, regs,"icmd sending cmd"); #if 0 GET_SBIC_csr(regs, csr); /* Lets us reload tcount */ WAIT_CIP(regs); GET_SBIC_asr(regs, asr); CSR_TRACE('I',csr,asr,target); if( asr & (SBIC_ASR_BSY|SBIC_ASR_LCI|SBIC_ASR_CIP) ) printf("next: cmd sent asr %02x, csr %02x\n", asr, csr); #endif break; #if 0 case SBIC_CSR_XFERRED|DATA_OUT_PHASE: case SBIC_CSR_XFERRED|DATA_IN_PHASE: case SBIC_CSR_MIS|DATA_OUT_PHASE: case SBIC_CSR_MIS|DATA_IN_PHASE: case SBIC_CSR_MIS_1|DATA_OUT_PHASE: case SBIC_CSR_MIS_1|DATA_IN_PHASE: case SBIC_CSR_MIS_2|DATA_OUT_PHASE: case SBIC_CSR_MIS_2|DATA_IN_PHASE: if (acb->sc_kv.dc_count <= 0) i = sbicabort(dev, regs, "icmd out of data"); else { wait = sbic_data_wait; if (sbicxfstart(regs, acb->sc_kv.dc_count, SBIC_PHASE(csr), wait)) if (csr & 0x01) /* data in? */ i=sbicxfin(regs, acb->sc_kv.dc_count, acb->sc_kv.dc_addr); else i=sbicxfout(regs, acb->sc_kv.dc_count, acb->sc_kv.dc_addr, SBIC_PHASE(csr)); acb->sc_kv.dc_addr += (acb->sc_kv.dc_count - i); acb->sc_kv.dc_count = i; i = 1; } break; #endif case SBIC_CSR_XFERRED|STATUS_PHASE: case SBIC_CSR_MIS|STATUS_PHASE: case SBIC_CSR_MIS_1|STATUS_PHASE: case SBIC_CSR_MIS_2|STATUS_PHASE: /* * the sbic does the status/cmd-complete reading ok, * so do this with its hi-level commands. */ #ifdef DEBUG if(sbic_debug) printf("SBICICMD status phase\n"); #endif SBIC_TC_PUT(regs, 0); SET_SBIC_cmd_phase(regs, 0x46); SET_SBIC_cmd(regs, SBIC_CMD_SEL_ATN_XFER); break; #if THIS_IS_A_RESERVED_STATE case BUS_FREE_PHASE: /* This is not legal */ if( dev->sc_stat[0] != 0xff ) goto out; break; #endif default: i = sbicnextstate(dev, csr, asr); } /* * make sure the last command was taken, * ie. we're not hunting after an ignored command.. */ GET_SBIC_asr(regs, asr); /* tapes may take a loooong time.. */ while (asr & SBIC_ASR_BSY){ if(asr & SBIC_ASR_DBR) { printf("sbicicmd: Waiting while sbic is jammed, CSR:%02x,ASR:%02x\n", csr,asr); #ifdef DDB Debugger(); #endif /* SBIC is jammed */ /* DUNNO which direction */ /* Try old direction */ GET_SBIC_data(regs,i); GET_SBIC_asr(regs, asr); if( asr & SBIC_ASR_DBR) /* Wants us to write */ SET_SBIC_data(regs,i); } GET_SBIC_asr(regs, asr); } /* * wait for last command to complete */ if (asr & SBIC_ASR_LCI) { printf("sbicicmd: last command ignored\n"); } else if( i == 1 ) /* Bsy */ SBIC_WAIT (regs, SBIC_ASR_INT, wait); /* * do it again */ } while ( i > 0 && dev->sc_stat[0] == 0xff); /* Sometimes we need to do an extra read of the CSR */ GET_SBIC_csr(regs, csr); CSR_TRACE('I',csr,asr,0xff); #if CSR_LOG_BUF_SIZE if(reselect_debug>1) for(i=0; i 1) printf("sbicicmd done(%d,%d):%d =%d=\n", dev->target, lun, acb->sc_kv.dc_count, dev->sc_stat[0]); #endif QPRINTF(("=STS:%02x=", dev->sc_stat[0])); dev->sc_flags &= ~SBICF_ICMD; SBIC_TRACE(dev); return(dev->sc_stat[0]); } /* * Finish SCSI xfer command: After the completion interrupt from * a read/write operation, sequence through the final phases in * programmed i/o. This routine is a lot like sbicicmd except we * skip (and don't allow) the select, cmd out and data in/out phases. */ void sbicxfdone(dev, regs, target) struct sbic_softc *dev; sbic_regmap_p regs; int target; { u_char phase, asr, csr; int s; SBIC_TRACE(dev); QPRINTF(("{")); s = splbio(); /* * have the sbic complete on its own */ SBIC_TC_PUT(regs, 0); SET_SBIC_cmd_phase(regs, 0x46); SET_SBIC_cmd(regs, SBIC_CMD_SEL_ATN_XFER); do { asr = SBIC_WAIT (regs, SBIC_ASR_INT, 0); GET_SBIC_csr (regs, csr); CSR_TRACE('f',csr,asr,target); QPRINTF(("%02x:", csr)); } while ((csr != SBIC_CSR_DISC) && (csr != SBIC_CSR_DISC_1) && (csr != SBIC_CSR_S_XFERRED)); dev->sc_flags &= ~SBICF_SELECTED; GET_SBIC_cmd_phase (regs, phase); QPRINTF(("}%02x", phase)); if (phase == 0x60) GET_SBIC_tlun(regs, dev->sc_stat[0]); else sbicerror(dev, regs, csr); QPRINTF(("=STS:%02x=\n", dev->sc_stat[0])); splx(s); SBIC_TRACE(dev); } /* * No DMA chains */ int sbicgo(dev, xs) struct sbic_softc *dev; struct scsi_xfer *xs; { int i, dmaflags, count, usedma; u_char csr, asr, *addr; sbic_regmap_p regs; struct sbic_acb *acb; SBIC_TRACE(dev); dev->target = xs->sc_link->target; dev->lun = xs->sc_link->lun; acb = dev->sc_nexus; regs = dev->sc_sbicp; usedma = sbicdmaok(dev, xs); #ifdef DEBUG routine = 1; debug_sbic_regs = regs; /* store this to allow debug calls */ if( data_pointer_debug > 1 ) printf("sbicgo(%d,%d)\n", dev->target, dev->lun); #endif /* * set the sbic into DMA mode */ if( usedma ) SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI | SBIC_MACHINE_DMA_MODE); else SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI); /* * select the SCSI bus (it's an error if bus isn't free) */ if (sbicselectbus(dev, regs, dev->target, dev->lun, dev->sc_scsiaddr)) { /* printf("sbicgo: Trying to select busy bus!\n"); */ SBIC_TRACE(dev); return(0); /* Not done: needs to be rescheduled */ } dev->sc_stat[0] = 0xff; /* * Calculate DMA chains now */ dmaflags = 0; if (acb->flags & ACB_DATAIN) dmaflags |= DMAGO_READ; /* * Deal w/bounce buffers. */ addr = acb->sc_kv.dc_addr; count = acb->sc_kv.dc_count; if (count && (char *)kvtop(addr) != acb->sc_pa.dc_addr) { /* XXXX check */ printf("sbic: DMA buffer mapping changed %p->%x\n", acb->sc_pa.dc_addr, kvtop(addr)); #ifdef DDB Debugger(); #endif } #ifdef DEBUG ++sbicdma_ops; /* count total DMA operations */ #endif if (count && usedma && dev->sc_flags & SBICF_BADDMA && sbiccheckdmap(addr, count, dev->sc_dmamask)) { /* * need to bounce the dma. */ if (dmaflags & DMAGO_READ) { acb->flags |= ACB_BBUF; acb->sc_dmausrbuf = addr; acb->sc_dmausrlen = count; acb->sc_usrbufpa = (u_char *)kvtop(addr); if(!dev->sc_tinfo[dev->target].bounce) { printf("sbicgo: HELP! no bounce allocated for %d\n", dev->target); printf("xfer: (%p->%p,%lx)\n", acb->sc_dmausrbuf, acb->sc_usrbufpa, acb->sc_dmausrlen); dev->sc_tinfo[xs->sc_link->target].bounce = (char *)alloc_z2mem(MAXPHYS); if (isztwomem(dev->sc_tinfo[xs->sc_link->target].bounce)) printf("alloc ZII target %d bounce pa 0x%x\n", xs->sc_link->target, kvtop(dev->sc_tinfo[xs->sc_link->target].bounce)); else if (dev->sc_tinfo[xs->sc_link->target].bounce) printf("alloc CHIP target %d bounce pa 0x%p\n", xs->sc_link->target, PREP_DMA_MEM(dev->sc_tinfo[xs->sc_link->target].bounce)); printf("Allocating %d bounce at %x\n", dev->target, kvtop(dev->sc_tinfo[dev->target].bounce)); } } else { /* write: copy to dma buffer */ #ifdef DEBUG if(data_pointer_debug) printf("sbicgo: copying %x bytes to target %d bounce %x\n", count, dev->target, kvtop(dev->sc_tinfo[dev->target].bounce)); #endif bcopy (addr, dev->sc_tinfo[dev->target].bounce, count); } addr = dev->sc_tinfo[dev->target].bounce;/* and use dma buffer */ acb->sc_kv.dc_addr = addr; #ifdef DEBUG ++sbicdma_bounces; /* count number of bounced */ #endif } /* * Allocate the DMA chain */ /* Set start KVM addresses */ #if 0 acb->sc_kv.dc_addr = addr; acb->sc_kv.dc_count = count; #endif /* Mark end of segment */ acb->sc_tcnt = dev->sc_tcnt = 0; acb->sc_pa.dc_count = 0; sbic_load_ptrs(dev, regs, dev->target, dev->lun); SBIC_TRACE(dev); /* Enable interrupts but don't do any DMA */ dev->sc_enintr(dev); if (usedma) { dev->sc_tcnt = dev->sc_dmago(dev, acb->sc_pa.dc_addr, acb->sc_pa.dc_count, dmaflags); #ifdef DEBUG dev->sc_dmatimo = dev->sc_tcnt ? 1 : 0; #endif } else dev->sc_dmacmd = 0; /* Don't use DMA */ dev->sc_flags |= SBICF_INDMA; /* SBIC_TC_PUT(regs, dev->sc_tcnt); */ /* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */ SBIC_TRACE(dev); sbic_save_ptrs(dev, regs, dev->target, dev->lun); /* * push the data cache ( I think this won't work (EH)) */ #if defined(M68040) || defined(M68060) if (mmutype == MMU_68040 && usedma && count) { dma_cachectl(addr, count); if (((u_int)addr & 0xF) || (((u_int)addr + count) & 0xF)) dev->sc_flags |= SBICF_DCFLUSH; } #endif /* * enintr() also enables interrupts for the sbic */ #ifdef DEBUG if( data_pointer_debug > 1 ) printf("sbicgo dmago:%d(%p:%lx)\n", dev->target,dev->sc_cur->dc_addr,dev->sc_tcnt); #if 0 /* * Hmm - this isn't right: asr and csr haven't been set yet. */ debug_asr = asr; debug_csr = csr; #endif #endif /* * Lets cycle a while then let the interrupt handler take over */ asr = GET_SBIC_asr(regs, asr); do { GET_SBIC_csr(regs, csr); CSR_TRACE('g',csr,asr,dev->target); #ifdef DEBUG debug_csr = csr; routine = 1; #endif QPRINTF(("go[0x%x]", csr)); i = sbicnextstate(dev, csr, asr); WAIT_CIP(regs); GET_SBIC_asr(regs, asr); #ifdef DEBUG debug_asr = asr; #endif if(asr & SBIC_ASR_LCI) printf("sbicgo: LCI asr:%02x csr:%02x\n", asr,csr); } while( i == SBIC_STATE_RUNNING && asr & (SBIC_ASR_INT|SBIC_ASR_LCI) ); CSR_TRACE('g',csr,asr,i<<4); SBIC_TRACE(dev); if (i == SBIC_STATE_DONE && dev->sc_stat[0] == 0xff) printf("sbicgo: done & stat = 0xff\n"); if (i == SBIC_STATE_DONE && dev->sc_stat[0] != 0xff) { /* if( i == SBIC_STATE_DONE && dev->sc_stat[0] ) { */ /* Did we really finish that fast? */ return 1; } return 0; } int sbicintr(dev) struct sbic_softc *dev; { sbic_regmap_p regs; u_char asr, csr; int i; regs = dev->sc_sbicp; /* * pending interrupt? */ GET_SBIC_asr (regs, asr); if ((asr & SBIC_ASR_INT) == 0) return(0); SBIC_TRACE(dev); do { GET_SBIC_csr(regs, csr); CSR_TRACE('i',csr,asr,dev->target); #ifdef DEBUG debug_csr = csr; routine = 2; #endif QPRINTF(("intr[0x%x]", csr)); i = sbicnextstate(dev, csr, asr); WAIT_CIP(regs); GET_SBIC_asr(regs, asr); #ifdef DEBUG debug_asr = asr; #endif #if 0 if(asr & SBIC_ASR_LCI) printf("sbicintr: LCI asr:%02x csr:%02x\n", asr,csr); #endif } while(i == SBIC_STATE_RUNNING && asr & (SBIC_ASR_INT|SBIC_ASR_LCI)); CSR_TRACE('i',csr,asr,i<<4); SBIC_TRACE(dev); return(1); } /* * Run commands and wait for disconnect */ int sbicpoll(dev) struct sbic_softc *dev; { sbic_regmap_p regs; u_char asr, csr; int i; SBIC_TRACE(dev); regs = dev->sc_sbicp; do { GET_SBIC_asr (regs, asr); #ifdef DEBUG debug_asr = asr; #endif GET_SBIC_csr(regs, csr); CSR_TRACE('p',csr,asr,dev->target); #ifdef DEBUG debug_csr = csr; routine = 2; #endif QPRINTF(("poll[0x%x]", csr)); i = sbicnextstate(dev, csr, asr); WAIT_CIP(regs); GET_SBIC_asr(regs, asr); /* tapes may take a loooong time.. */ while (asr & SBIC_ASR_BSY){ if(asr & SBIC_ASR_DBR) { printf("sbipoll: Waiting while sbic is jammed, CSR:%02x,ASR:%02x\n", csr,asr); #ifdef DDB Debugger(); #endif /* SBIC is jammed */ /* DUNNO which direction */ /* Try old direction */ GET_SBIC_data(regs,i); GET_SBIC_asr(regs, asr); if( asr & SBIC_ASR_DBR) /* Wants us to write */ SET_SBIC_data(regs,i); } GET_SBIC_asr(regs, asr); } if(asr & SBIC_ASR_LCI) printf("sbicpoll: LCI asr:%02x csr:%02x\n", asr,csr); else if( i == 1 ) /* BSY */ SBIC_WAIT(regs, SBIC_ASR_INT, sbic_cmd_wait); } while(i == SBIC_STATE_RUNNING); CSR_TRACE('p',csr,asr,i<<4); SBIC_TRACE(dev); return(1); } /* * Handle a single msgin */ int sbicmsgin(dev) struct sbic_softc *dev; { sbic_regmap_p regs; int recvlen; u_char asr, csr, *tmpaddr; regs = dev->sc_sbicp; dev->sc_msg[0] = 0xff; dev->sc_msg[1] = 0xff; GET_SBIC_asr(regs, asr); #ifdef DEBUG if(reselect_debug>1) printf("sbicmsgin asr=%02x\n", asr); #endif sbic_save_ptrs(dev, regs, dev->target, dev->lun); GET_SBIC_selid (regs, csr); SET_SBIC_selid (regs, csr | SBIC_SID_FROM_SCSI); SBIC_TC_PUT(regs, 0); tmpaddr = dev->sc_msg; recvlen = 1; do { while( recvlen-- ) { asr = GET_SBIC_asr(regs, asr); GET_SBIC_csr(regs, csr); QPRINTF(("sbicmsgin ready to go (csr,asr)=(%02x,%02x)\n", csr, asr)); RECV_BYTE(regs, *tmpaddr); CSR_TRACE('m',csr,asr,*tmpaddr); #if 1 /* * get the command completion interrupt, or we * can't send a new command (LCI) */ SBIC_WAIT(regs, SBIC_ASR_INT, 0); GET_SBIC_csr(regs, csr); CSR_TRACE('X',csr,asr,dev->target); #else WAIT_CIP(regs); do { GET_SBIC_asr(regs, asr); csr = 0xff; GET_SBIC_csr(regs, csr); CSR_TRACE('X',csr,asr,dev->target); if( csr == 0xff ) printf("sbicmsgin waiting: csr %02x asr %02x\n", csr, asr); } while( csr == 0xff ); #endif #ifdef DEBUG if(reselect_debug>1) printf("sbicmsgin: got %02x csr %02x asr %02x\n", *tmpaddr, csr, asr); #endif #if do_parity_check if( asr & SBIC_ASR_PE ) { printf ("Parity error"); /* This code simply does not work. */ WAIT_CIP(regs); SET_SBIC_cmd(regs, SBIC_CMD_SET_ATN); WAIT_CIP(regs); GET_SBIC_asr(regs, asr); WAIT_CIP(regs); SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK); WAIT_CIP(regs); if( !(asr & SBIC_ASR_LCI) ) /* Target wants to send garbled msg*/ continue; printf("--fixing\n"); /* loop until a msgout phase occurs on target */ while(csr & 0x07 != MESG_OUT_PHASE) { while( asr & SBIC_ASR_BSY && !(asr & SBIC_ASR_DBR|SBIC_ASR_INT) ) GET_SBIC_asr(regs, asr); if( asr & SBIC_ASR_DBR ) panic("msgin: jammed again!"); GET_SBIC_csr(regs, csr); CSR_TRACE('e',csr,asr,dev->target); if( csr & 0x07 != MESG_OUT_PHASE ) { sbicnextstate(dev, csr, asr); sbic_save_ptrs(dev, regs, dev->target, dev->lun); } } /* Should be msg out by now */ SEND_BYTE(regs, MSG_PARITY_ERROR); } else #endif tmpaddr++; if(recvlen) { /* Clear ACK */ WAIT_CIP(regs); GET_SBIC_asr(regs, asr); GET_SBIC_csr(regs, csr); CSR_TRACE('X',csr,asr,dev->target); QPRINTF(("sbicmsgin pre byte CLR_ACK (csr,asr)=(%02x,%02x)\n", csr, asr)); SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK); SBIC_WAIT(regs, SBIC_ASR_INT, 0); } }; if(dev->sc_msg[0] == 0xff) { printf("sbicmsgin: sbic swallowed our message\n"); break; } #ifdef DEBUG if (sync_debug) printf("msgin done csr 0x%x asr 0x%x msg 0x%x\n", csr, asr, dev->sc_msg[0]); #endif /* * test whether this is a reply to our sync * request */ if (MSG_ISIDENTIFY(dev->sc_msg[0])) { QPRINTF(("IFFY")); #if 0 /* There is an implied load-ptrs here */ sbic_load_ptrs(dev, regs, dev->target, dev->lun); #endif /* Got IFFY msg -- ack it */ } else if (dev->sc_msg[0] == MSG_REJECT && dev->sc_sync[dev->target].state == SYNC_SENT) { QPRINTF(("REJECT of SYN")); #ifdef DEBUG if (sync_debug) printf("target %d rejected sync, going async\n", dev->target); #endif dev->sc_sync[dev->target].period = sbic_min_period; dev->sc_sync[dev->target].offset = 0; dev->sc_sync[dev->target].state = SYNC_DONE; SET_SBIC_syn(regs, SBIC_SYN(dev->sc_sync[dev->target].offset, dev->sc_sync[dev->target].period)); } else if ((dev->sc_msg[0] == MSG_REJECT)) { QPRINTF(("REJECT")); /* * we'll never REJECt a REJECT message.. */ } else if ((dev->sc_msg[0] == MSG_SAVE_DATA_PTR)) { QPRINTF(("MSG_SAVE_DATA_PTR")); /* * don't reject this either. */ } else if ((dev->sc_msg[0] == MSG_DISCONNECT)) { QPRINTF(("DISCONNECT")); #ifdef DEBUG if( reselect_debug>1 && dev->sc_msg[0] == MSG_DISCONNECT ) printf("sbicmsgin: got disconnect msg %s\n", (dev->sc_flags & SBICF_ICMD)?"rejecting":""); #endif if( dev->sc_flags & SBICF_ICMD ) { /* We're in immediate mode. Prevent disconnects. */ /* prepare to reject the message, NACK */ SET_SBIC_cmd(regs, SBIC_CMD_SET_ATN); WAIT_CIP(regs); } } else if (dev->sc_msg[0] == MSG_CMD_COMPLETE ) { QPRINTF(("CMD_COMPLETE")); /* !! KLUDGE ALERT !! quite a few drives don't seem to * really like the current way of sending the * sync-handshake together with the ident-message, and * they react by sending command-complete and * disconnecting right after returning the valid sync * handshake. So, all I can do is reselect the drive, * and hope it won't disconnect again. I don't think * this is valid behavior, but I can't help fixing a * problem that apparently exists. * * Note: we should not get here on `normal' command * completion, as that condition is handled by the * high-level sel&xfer resume command used to walk * thru status/cc-phase. */ #ifdef DEBUG if (sync_debug) printf ("GOT MSG %d! target %d acting weird.." " waiting for disconnect...\n", dev->sc_msg[0], dev->target); #endif /* Check to see if sbic is handling this */ GET_SBIC_asr(regs, asr); if(asr & SBIC_ASR_BSY) return SBIC_STATE_RUNNING; /* Let's try this: Assume it works and set status to 00 */ dev->sc_stat[0] = 0; } else if (dev->sc_msg[0] == MSG_EXT_MESSAGE && tmpaddr == &dev->sc_msg[1]) { QPRINTF(("ExtMSG\n")); /* Read in whole extended message */ SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK); SBIC_WAIT(regs, SBIC_ASR_INT, 0); GET_SBIC_asr(regs, asr); GET_SBIC_csr(regs, csr); QPRINTF(("CLR ACK asr %02x, csr %02x\n", asr, csr)); RECV_BYTE(regs, *tmpaddr); CSR_TRACE('x',csr,asr,*tmpaddr); /* Wait for command completion IRQ */ SBIC_WAIT(regs, SBIC_ASR_INT, 0); recvlen = *tmpaddr++; QPRINTF(("Recving ext msg, asr %02x csr %02x len %02x\n", asr, csr, recvlen)); } else if (dev->sc_msg[0] == MSG_EXT_MESSAGE && dev->sc_msg[1] == 3 && dev->sc_msg[2] == MSG_SYNC_REQ) { QPRINTF(("SYN")); dev->sc_sync[dev->target].period = sbicfromscsiperiod(dev, regs, dev->sc_msg[3]); dev->sc_sync[dev->target].offset = dev->sc_msg[4]; dev->sc_sync[dev->target].state = SYNC_DONE; SET_SBIC_syn(regs, SBIC_SYN(dev->sc_sync[dev->target].offset, dev->sc_sync[dev->target].period)); printf("%s: target %d now synchronous," " period=%dns, offset=%d.\n", dev->sc_dev.dv_xname, dev->target, dev->sc_msg[3] * 4, dev->sc_msg[4]); } else { #ifdef DEBUG if (sbic_debug || sync_debug) printf ("sbicmsgin: Rejecting message 0x%02x\n", dev->sc_msg[0]); #endif /* prepare to reject the message, NACK */ SET_SBIC_cmd(regs, SBIC_CMD_SET_ATN); WAIT_CIP(regs); } /* Clear ACK */ WAIT_CIP(regs); GET_SBIC_asr(regs, asr); GET_SBIC_csr(regs, csr); CSR_TRACE('X',csr,asr,dev->target); QPRINTF(("sbicmsgin pre CLR_ACK (csr,asr)=(%02x,%02x)%d\n", csr, asr, recvlen)); SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK); SBIC_WAIT(regs, SBIC_ASR_INT, 0); } #if 0 while((csr == SBIC_CSR_MSGIN_W_ACK) || (SBIC_PHASE(csr) == MESG_IN_PHASE)); #else while (recvlen>0); #endif QPRINTF(("sbicmsgin finished: csr %02x, asr %02x\n",csr, asr)); /* Should still have one CSR to read */ return SBIC_STATE_RUNNING; } /* * sbicnextstate() * return: * 0 == done * 1 == working * 2 == disconnected * -1 == error */ int sbicnextstate(dev, csr, asr) struct sbic_softc *dev; u_char csr, asr; { sbic_regmap_p regs; struct sbic_acb *acb; int i, newtarget, newlun, wait; #if 0 unsigned tcnt; #endif i = 0; SBIC_TRACE(dev); regs = dev->sc_sbicp; acb = dev->sc_nexus; QPRINTF(("next[%02x,%02x]",asr,csr)); switch (csr) { case SBIC_CSR_XFERRED|CMD_PHASE: case SBIC_CSR_MIS|CMD_PHASE: case SBIC_CSR_MIS_1|CMD_PHASE: case SBIC_CSR_MIS_2|CMD_PHASE: sbic_save_ptrs(dev, regs, dev->target, dev->lun); if (sbicxfstart(regs, acb->clen, CMD_PHASE, sbic_cmd_wait)) if (sbicxfout(regs, acb->clen, &acb->cmd, CMD_PHASE)) goto abort; break; case SBIC_CSR_XFERRED|STATUS_PHASE: case SBIC_CSR_MIS|STATUS_PHASE: case SBIC_CSR_MIS_1|STATUS_PHASE: case SBIC_CSR_MIS_2|STATUS_PHASE: /* * this should be the normal i/o completion case. * get the status & cmd complete msg then let the * device driver look at what happened. */ sbicxfdone(dev,regs,dev->target); /* * check for overlapping cache line, flush if so */ #if defined(M68040) || defined(M68060) if (dev->sc_flags & SBICF_DCFLUSH) { #if 0 printf("sbic: 68040/68060 DMA cache flush needs " "fixing? %x:%x\n", dev->sc_xs->data, dev->sc_xs->datalen); #endif } #endif #ifdef DEBUG if( data_pointer_debug > 1 ) printf("next dmastop: %d(%p:%lx)\n", dev->target,dev->sc_cur->dc_addr,dev->sc_tcnt); dev->sc_dmatimo = 0; #endif dev->sc_dmastop(dev); /* was dmafree */ if (acb->flags & ACB_BBUF) { if ((u_char *)kvtop(acb->sc_dmausrbuf) != acb->sc_usrbufpa) printf("%s: WARNING - buffer mapping changed %p->%x\n", dev->sc_dev.dv_xname, acb->sc_usrbufpa, kvtop(acb->sc_dmausrbuf)); #ifdef DEBUG if(data_pointer_debug) printf("sbicgo:copying %lx bytes from target %d bounce %x\n", acb->sc_dmausrlen, dev->target, kvtop(dev->sc_tinfo[dev->target].bounce)); #endif bcopy(dev->sc_tinfo[dev->target].bounce, acb->sc_dmausrbuf, acb->sc_dmausrlen); } dev->sc_flags &= ~(SBICF_INDMA | SBICF_DCFLUSH); sbic_scsidone(acb, dev->sc_stat[0]); SBIC_TRACE(dev); return SBIC_STATE_DONE; case SBIC_CSR_XFERRED|DATA_OUT_PHASE: case SBIC_CSR_XFERRED|DATA_IN_PHASE: case SBIC_CSR_MIS|DATA_OUT_PHASE: case SBIC_CSR_MIS|DATA_IN_PHASE: case SBIC_CSR_MIS_1|DATA_OUT_PHASE: case SBIC_CSR_MIS_1|DATA_IN_PHASE: case SBIC_CSR_MIS_2|DATA_OUT_PHASE: case SBIC_CSR_MIS_2|DATA_IN_PHASE: if( dev->sc_xs->flags & SCSI_POLL || dev->sc_flags & SBICF_ICMD || acb->sc_dmacmd == 0 ) { /* Do PIO */ SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI); if (acb->sc_kv.dc_count <= 0) { printf("sbicnextstate:xfer count %d asr%x csr%x\n", acb->sc_kv.dc_count, asr, csr); goto abort; } wait = sbic_data_wait; if (sbicxfstart(regs, acb->sc_kv.dc_count, SBIC_PHASE(csr), wait)) { if (SBIC_PHASE(csr) == DATA_IN_PHASE) /* data in? */ i = sbicxfin(regs, acb->sc_kv.dc_count, acb->sc_kv.dc_addr); else i = sbicxfout(regs, acb->sc_kv.dc_count, acb->sc_kv.dc_addr, SBIC_PHASE(csr)); } acb->sc_kv.dc_addr += (acb->sc_kv.dc_count - i); acb->sc_kv.dc_count = i; } else { if (acb->sc_kv.dc_count <= 0) { printf("sbicnextstate:xfer count %d asr%x csr%x\n", acb->sc_kv.dc_count, asr, csr); goto abort; } /* * do scatter-gather dma * hacking the controller chip, ouch.. */ SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI | SBIC_MACHINE_DMA_MODE); /* * set next dma addr and dec count */ #if 0 SBIC_TC_GET(regs, tcnt); dev->sc_cur->dc_count -= ((dev->sc_tcnt - tcnt) >> 1); dev->sc_cur->dc_addr += (dev->sc_tcnt - tcnt); dev->sc_tcnt = acb->sc_tcnt = tcnt; #else sbic_save_ptrs(dev, regs, dev->target, dev->lun); sbic_load_ptrs(dev, regs, dev->target, dev->lun); #endif #ifdef DEBUG if( data_pointer_debug > 1 ) printf("next dmanext: %d(%p:%lx)\n", dev->target,dev->sc_cur->dc_addr, dev->sc_tcnt); dev->sc_dmatimo = 1; #endif dev->sc_tcnt = dev->sc_dmanext(dev); SBIC_TC_PUT(regs, (unsigned)dev->sc_tcnt); SET_SBIC_cmd(regs, SBIC_CMD_XFER_INFO); dev->sc_flags |= SBICF_INDMA; } break; case SBIC_CSR_XFERRED|MESG_IN_PHASE: case SBIC_CSR_MIS|MESG_IN_PHASE: case SBIC_CSR_MIS_1|MESG_IN_PHASE: case SBIC_CSR_MIS_2|MESG_IN_PHASE: SBIC_TRACE(dev); return sbicmsgin(dev); case SBIC_CSR_MSGIN_W_ACK: SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK); /* Dunno what I'm ACKing */ printf("Acking unknown msgin CSR:%02x",csr); break; case SBIC_CSR_XFERRED|MESG_OUT_PHASE: case SBIC_CSR_MIS|MESG_OUT_PHASE: case SBIC_CSR_MIS_1|MESG_OUT_PHASE: case SBIC_CSR_MIS_2|MESG_OUT_PHASE: #ifdef DEBUG if (sync_debug) printf ("sending REJECT msg to last msg.\n"); #endif sbic_save_ptrs(dev, regs, dev->target, dev->lun); /* * should only get here on reject, * since it's always US that * initiate a sync transfer */ SEND_BYTE(regs, MSG_REJECT); WAIT_CIP(regs); if( asr & (SBIC_ASR_BSY|SBIC_ASR_LCI|SBIC_ASR_CIP) ) printf("next: REJECT sent asr %02x\n", asr); SBIC_TRACE(dev); return SBIC_STATE_RUNNING; case SBIC_CSR_DISC: case SBIC_CSR_DISC_1: dev->sc_flags &= ~(SBICF_INDMA|SBICF_SELECTED); /* Try to schedule another target */ #ifdef DEBUG if(reselect_debug>1) printf("sbicnext target %d disconnected\n", dev->target); #endif TAILQ_INSERT_HEAD(&dev->nexus_list, acb, chain); ++dev->sc_tinfo[dev->target].dconns; dev->sc_nexus = NULL; dev->sc_xs = NULL; if( acb->xs->flags & SCSI_POLL || (dev->sc_flags & SBICF_ICMD) || !sbic_parallel_operations ) { SBIC_TRACE(dev); return SBIC_STATE_DISCONNECT; } sbic_sched(dev); SBIC_TRACE(dev); return SBIC_STATE_DISCONNECT; case SBIC_CSR_RSLT_NI: case SBIC_CSR_RSLT_IFY: GET_SBIC_rselid(regs, newtarget); /* check SBIC_RID_SIV? */ newtarget &= SBIC_RID_MASK; if (csr == SBIC_CSR_RSLT_IFY) { /* Read IFY msg to avoid lockup */ GET_SBIC_data(regs, newlun); WAIT_CIP(regs); newlun &= SBIC_TLUN_MASK; CSR_TRACE('r',csr,asr,newtarget); } else { /* Need to get IFY message */ for (newlun = 256; newlun; --newlun) { GET_SBIC_asr(regs, asr); if (asr & SBIC_ASR_INT) break; delay(1); } newlun = 0; /* XXXX */ if ((asr & SBIC_ASR_INT) == 0) { #ifdef DEBUG if (reselect_debug) printf("RSLT_NI - no IFFY message? asr %x\n", asr); #endif } else { GET_SBIC_csr(regs,csr); CSR_TRACE('n',csr,asr,newtarget); if (csr == (SBIC_CSR_MIS | MESG_IN_PHASE) || csr == (SBIC_CSR_MIS_1 | MESG_IN_PHASE) || csr == (SBIC_CSR_MIS_2 | MESG_IN_PHASE)) { sbicmsgin(dev); newlun = dev->sc_msg[0] & 7; } else { printf("RSLT_NI - not MESG_IN_PHASE %x\n", csr); } } } #ifdef DEBUG if(reselect_debug>1 || (reselect_debug && csr==SBIC_CSR_RSLT_NI)) printf("sbicnext: reselect %s from targ %d lun %d\n", csr == SBIC_CSR_RSLT_NI ? "NI" : "IFY", newtarget, newlun); #endif if (dev->sc_nexus) { #ifdef DEBUG if (reselect_debug > 1) printf("%s: reselect %s with active command\n", dev->sc_dev.dv_xname, csr == SBIC_CSR_RSLT_NI ? "NI" : "IFY"); #ifdef DDB /* Debugger();*/ #endif #endif TAILQ_INSERT_HEAD(&dev->ready_list, dev->sc_nexus, chain); dev->sc_tinfo[dev->target].lubusy &= ~(1 << dev->lun); dev->sc_nexus = NULL; dev->sc_xs = NULL; } /* Reload sync values for this target */ if (dev->sc_sync[newtarget].state == SYNC_DONE) SET_SBIC_syn(regs, SBIC_SYN (dev->sc_sync[newtarget].offset, dev->sc_sync[newtarget].period)); else SET_SBIC_syn(regs, SBIC_SYN (0, sbic_min_period)); for (acb = dev->nexus_list.tqh_first; acb; acb = acb->chain.tqe_next) { if (acb->xs->sc_link->target != newtarget || acb->xs->sc_link->lun != newlun) continue; TAILQ_REMOVE(&dev->nexus_list, acb, chain); dev->sc_nexus = acb; dev->sc_xs = acb->xs; dev->sc_flags |= SBICF_SELECTED; dev->target = newtarget; dev->lun = newlun; break; } if (acb == NULL) { printf("%s: reselect %s targ %d not in nexus_list %p\n", dev->sc_dev.dv_xname, csr == SBIC_CSR_RSLT_NI ? "NI" : "IFY", newtarget, &dev->nexus_list.tqh_first); panic("bad reselect in sbic"); } if (csr == SBIC_CSR_RSLT_IFY) SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK); break; default: abort: /* * Something unexpected happened -- deal with it. */ printf("sbicnextstate: aborting csr %02x asr %02x\n", csr, asr); #ifdef DDB Debugger(); #endif #ifdef DEBUG if( data_pointer_debug > 1 ) printf("next dmastop: %d(%p:%lx)\n", dev->target,dev->sc_cur->dc_addr,dev->sc_tcnt); dev->sc_dmatimo = 0; #endif dev->sc_dmastop(dev); SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI); sbicerror(dev, regs, csr); sbicabort(dev, regs, "next"); if (dev->sc_flags & SBICF_INDMA) { /* * check for overlapping cache line, flush if so */ #if defined(M68040) || defined(M68060) if (dev->sc_flags & SBICF_DCFLUSH) { #if 0 printf("sbic: 68040/060 DMA cache flush needs " "fixing? %x:%x\n", dev->sc_xs->data, dev->sc_xs->datalen); #endif } #endif dev->sc_flags &= ~(SBICF_INDMA | SBICF_DCFLUSH); #ifdef DEBUG if( data_pointer_debug > 1 ) printf("next dmastop: %d(%p:%lx)\n", dev->target,dev->sc_cur->dc_addr,dev->sc_tcnt); dev->sc_dmatimo = 0; #endif dev->sc_dmastop(dev); sbic_scsidone(acb, -1); } SBIC_TRACE(dev); return SBIC_STATE_ERROR; } SBIC_TRACE(dev); return(SBIC_STATE_RUNNING); } /* * Check if DMA can not be used with specified buffer */ int sbiccheckdmap(bp, len, mask) void *bp; u_long len, mask; { u_char *buffer; u_long phy_buf; u_long phy_len; buffer = bp; if (len == 0) return(0); while (len) { phy_buf = kvtop(buffer); if (len < (phy_len = NBPG - ((int) buffer & PGOFSET))) phy_len = len; if (phy_buf & mask) return(1); buffer += phy_len; len -= phy_len; } return(0); } int sbictoscsiperiod(dev, regs, a) struct sbic_softc *dev; sbic_regmap_p regs; int a; { unsigned int fs; /* * cycle = DIV / (2*CLK) * DIV = FS+2 * best we can do is 200ns at 20Mhz, 2 cycles */ GET_SBIC_myid(regs,fs); fs = (fs >>6) + 2; /* DIV */ fs = (fs * 10000) / (dev->sc_clkfreq<<1); /* Cycle, in ns */ if (a < 2) a = 8; /* map to Cycles */ return ((fs*a)>>2); /* in 4 ns units */ } int sbicfromscsiperiod(dev, regs, p) struct sbic_softc *dev; sbic_regmap_p regs; int p; { register unsigned int fs, ret; /* Just the inverse of the above */ GET_SBIC_myid(regs,fs); fs = (fs >>6) + 2; /* DIV */ fs = (fs * 10000) / (dev->sc_clkfreq<<1); /* Cycle, in ns */ ret = p << 2; /* in ns units */ ret = ret / fs; /* in Cycles */ if (ret < sbic_min_period) return(sbic_min_period); /* verify rounding */ if (sbictoscsiperiod(dev, regs, ret) < p) ret++; return (ret >= 8) ? 0 : ret; } #ifdef DEBUG void sbicdumpstate() { u_char csr, asr; GET_SBIC_asr(debug_sbic_regs,asr); GET_SBIC_csr(debug_sbic_regs,csr); printf("%s: asr:csr(%02x:%02x)->(%02x:%02x)\n", (routine==1)?"sbicgo": (routine==2)?"sbicintr": (routine==3)?"sbicicmd": (routine==4)?"sbicnext":"unknown", debug_asr, debug_csr, asr, csr); } void sbictimeout(dev) struct sbic_softc *dev; { int s, asr; s = splbio(); if (dev->sc_dmatimo) { if (dev->sc_dmatimo > 1) { printf("%s: dma timeout #%d\n", dev->sc_dev.dv_xname, dev->sc_dmatimo - 1); GET_SBIC_asr(dev->sc_sbicp, asr); if( asr & SBIC_ASR_INT ) { /* We need to service a missed IRQ */ printf("Servicing a missed int:(%02x,%02x)->(%02x,??)\n", debug_asr, debug_csr, asr); sbicintr(dev); } sbicdumpstate(); } dev->sc_dmatimo++; } splx(s); timeout((void *)sbictimeout, dev, 30 * hz); } void sbic_dump_acb(acb) struct sbic_acb *acb; { u_char *b = (u_char *) &acb->cmd; int i; printf("acb@%p ", acb); if (acb->xs == NULL) { printf("\n"); return; } printf("(%d:%d) flags %2x clen %2d cmd ", acb->xs->sc_link->target, acb->xs->sc_link->lun, acb->flags, acb->clen); for (i = acb->clen; i; --i) printf(" %02x", *b++); printf("\n"); printf(" xs: %8p data %8p:%04x ", acb->xs, acb->xs->data, acb->xs->datalen); printf("va %8p:%04x ", acb->sc_kv.dc_addr, acb->sc_kv.dc_count); printf("pa %8p:%04x tcnt %lx\n", acb->sc_pa.dc_addr, acb->sc_pa.dc_count, acb->sc_tcnt); } void sbic_dump(dev) struct sbic_softc *dev; { sbic_regmap_p regs; u_char csr, asr; struct sbic_acb *acb; int s; int i; s = splbio(); regs = dev->sc_sbicp; #if CSR_TRACE_SIZE printf("csr trace: "); i = csr_traceptr; do { printf("%c%02x%02x%02x ", csr_trace[i].whr, csr_trace[i].csr, csr_trace[i].asr, csr_trace[i].xtn); switch(csr_trace[i].whr) { case 'g': printf("go "); break; case 's': printf("select "); break; case 'y': printf("select+ "); break; case 'i': printf("intr "); break; case 'f': printf("finish "); break; case '>': printf("out "); break; case '<': printf("in "); break; case 'm': printf("msgin "); break; case 'x': printf("msginx "); break; case 'X': printf("msginX "); break; case 'r': printf("reselect "); break; case 'I': printf("icmd "); break; case 'a': printf("abort "); break; default: printf("? "); } switch(csr_trace[i].csr) { case 0x11: printf("INITIATOR"); break; case 0x16: printf("S_XFERRED"); break; case 0x20: printf("MSGIN_ACK"); break; case 0x41: printf("DISC"); break; case 0x42: printf("SEL_TIMEO"); break; case 0x80: printf("RSLT_NI"); break; case 0x81: printf("RSLT_IFY"); break; case 0x85: printf("DISC_1"); break; case 0x18: case 0x19: case 0x1a: case 0x1b: case 0x1e: case 0x1f: case 0x28: case 0x29: case 0x2a: case 0x2b: case 0x2e: case 0x2f: case 0x48: case 0x49: case 0x4a: case 0x4b: case 0x4e: case 0x4f: case 0x88: case 0x89: case 0x8a: case 0x8b: case 0x8e: case 0x8f: switch(csr_trace[i].csr & 0xf0) { case 0x10: printf("DONE_"); break; case 0x20: printf("STOP_"); break; case 0x40: printf("ERR_"); break; case 0x80: printf("REQ_"); break; } switch(csr_trace[i].csr & 7) { case 0: printf("DATA_OUT"); break; case 1: printf("DATA_IN"); break; case 2: printf("CMD"); break; case 3: printf("STATUS"); break; case 6: printf("MSG_OUT"); break; case 7: printf("MSG_IN"); break; default: printf("invld phs"); } break; default: printf("****"); break; } if (csr_trace[i].asr & SBIC_ASR_INT) printf(" ASR_INT"); if (csr_trace[i].asr & SBIC_ASR_LCI) printf(" ASR_LCI"); if (csr_trace[i].asr & SBIC_ASR_BSY) printf(" ASR_BSY"); if (csr_trace[i].asr & SBIC_ASR_CIP) printf(" ASR_CIP"); printf("\n"); i = (i + 1) & (CSR_TRACE_SIZE - 1); } while (i != csr_traceptr); #endif GET_SBIC_asr(regs, asr); if ((asr & SBIC_ASR_INT) == 0) GET_SBIC_csr(regs, csr); else csr = 0; printf("%s@%p regs %p asr %x csr %x\n", dev->sc_dev.dv_xname, dev, regs, asr, csr); if ((acb = dev->free_list.tqh_first)) { printf("Free list:\n"); while (acb) { sbic_dump_acb(acb); acb = acb->chain.tqe_next; } } if ((acb = dev->ready_list.tqh_first)) { printf("Ready list:\n"); while (acb) { sbic_dump_acb(acb); acb = acb->chain.tqe_next; } } if ((acb = dev->nexus_list.tqh_first)) { printf("Nexus list:\n"); while (acb) { sbic_dump_acb(acb); acb = acb->chain.tqe_next; } } if (dev->sc_nexus) { printf("nexus:\n"); sbic_dump_acb(dev->sc_nexus); } printf("sc_xs %p targ %d lun %d flags %x tcnt %lx dmacmd %x mask %lx\n", dev->sc_xs, dev->target, dev->lun, dev->sc_flags, dev->sc_tcnt, dev->sc_dmacmd, dev->sc_dmamask); for (i = 0; i < 8; ++i) { if (dev->sc_tinfo[i].cmds > 2) { printf("tgt %d: cmds %d disc %d senses %d lubusy %x\n", i, dev->sc_tinfo[i].cmds, dev->sc_tinfo[i].dconns, dev->sc_tinfo[i].senses, dev->sc_tinfo[i].lubusy); } } splx(s); } #endif