/* $OpenBSD: sbicvar.h,v 1.4 2001/01/25 03:50:46 todd Exp $ */ /* $NetBSD: sbicvar.h,v 1.11 1996/04/21 21:12:23 veego Exp $ */ /* * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Van Jacobson of Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)scsivar.h 7.1 (Berkeley) 5/8/90 */ #ifndef _SBICVAR_H_ #define _SBICVAR_H_ #include /* * The largest single request will be MAXPHYS bytes which will require * at most MAXPHYS/NBPG+1 chain elements to describe, i.e. if none of * the buffer pages are physically contiguous (MAXPHYS/NBPG) and the * buffer is not page aligned (+1). */ #define DMAMAXIO (MAXPHYS/NBPG+1) struct dma_chain { int dc_count; char *dc_addr; }; /* * ACB. Holds additional information for each SCSI command Comments: We * need a separate scsi command block because we may need to overwrite it * with a request sense command. Basicly, we refrain from fiddling with * the scsi_xfer struct (except do the expected updating of return values). * We'll generally update: xs->{flags,resid,error,sense,status} and * occasionally xs->retries. */ struct sbic_acb { TAILQ_ENTRY(sbic_acb) chain; struct scsi_xfer *xs; /* SCSI xfer ctrl block from above */ int flags; /* Status */ #define ACB_FREE 0x00 #define ACB_ACTIVE 0x01 #define ACB_DONE 0x04 #define ACB_CHKSENSE 0x08 #define ACB_BBUF 0x10 /* DMA input needs to be copied from bounce */ #define ACB_DATAIN 0x20 /* DMA direction flag */ struct scsi_generic cmd; /* SCSI command block */ int clen; struct dma_chain sc_kv; /* Virtual address of whole DMA */ struct dma_chain sc_pa; /* Physical address of DMA segment */ u_long sc_tcnt; /* number of bytes for this DMA */ u_char *sc_dmausrbuf; /* user buffer kva - for bounce copy */ u_long sc_dmausrlen; /* length of bounce copy */ u_short sc_dmacmd; /* Internal data for this DMA */ char *pa_addr; /* XXXX initial phys addr */ u_char *sc_usrbufpa; /* user buffer phys addr */ }; /* * Some info about each (possible) target on the SCSI bus. This should * probably have been a "per target+lunit" structure, but we'll leave it at * this for now. Is there a way to reliably hook it up to sc->fordriver?? */ struct sbic_tinfo { int cmds; /* #commands processed */ int dconns; /* #disconnects */ int touts; /* #timeouts */ int perrs; /* #parity errors */ int senses; /* #request sense commands sent */ u_char* bounce; /* Bounce buffer for this device */ ushort lubusy; /* What local units/subr. are busy? */ u_char flags; u_char period; /* Period suggestion */ u_char offset; /* Offset suggestion */ } tinfo_t; struct sbic_softc { struct device sc_dev; struct isr sc_isr; struct target_sync { u_char state; u_char period; u_char offset; } sc_sync[8]; u_char target; /* Currently active target */ u_char lun; struct scsi_link sc_link; /* proto for sub devices */ sbic_regmap_p sc_sbicp; /* the SBIC */ volatile void *sc_cregs; /* driver specific regs */ /* Lists of command blocks */ TAILQ_HEAD(acb_list, sbic_acb) free_list, ready_list, nexus_list; struct sbic_acb *sc_nexus; /* current command */ struct sbic_acb sc_acb[8]; /* the real command blocks */ struct sbic_tinfo sc_tinfo[8]; struct scsi_xfer *sc_xs; /* transfer from high level code */ u_char sc_flags; u_char sc_scsiaddr; u_char sc_stat[2]; u_char sc_msg[7]; u_long sc_clkfreq; u_long sc_tcnt; /* number of bytes transferred */ u_short sc_dmacmd; /* used by dma drivers */ u_short sc_dmatimo; /* dma timeout */ u_long sc_dmamask; /* dma valid mem mask */ struct dma_chain *sc_cur; struct dma_chain *sc_last; int (*sc_dmago) __P((struct sbic_softc *, char *, int, int)); int (*sc_dmanext) __P((struct sbic_softc *)); void (*sc_enintr) __P((struct sbic_softc *)); void (*sc_dmastop) __P((struct sbic_softc *)); u_short gtsc_bankmask; /* GVP specific bank selected */ }; /* sc_flags */ #define SBICF_ALIVE 0x01 /* controller initialized */ #define SBICF_DCFLUSH 0x02 /* need flush for overlap after dma finishes */ #define SBICF_SELECTED 0x04 /* bus is in selected state. */ #define SBICF_ICMD 0x08 /* Immediate command in execution */ #define SBICF_BADDMA 0x10 /* controller can only DMA to ztwobus space */ #define SBICF_INTR 0x40 /* SBICF interrupt expected */ #define SBICF_INDMA 0x80 /* not used yet, DMA I/O in progress */ /* sync states */ #define SYNC_START 0 /* no sync handshake started */ #define SYNC_SENT 1 /* we sent sync request, no answer yet */ #define SYNC_DONE 2 /* target accepted our (or inferior) settings, or it rejected the request and we stay async */ #ifdef DEBUG #define DDB_FOLLOW 0x04 #define DDB_IO 0x08 #endif extern u_char sbic_inhibit_sync[8]; extern int sbic_no_dma; extern int sbic_clock_override; #define PHASE 0x07 /* mask for psns/pctl phase */ #define DATA_OUT_PHASE 0x00 #define DATA_IN_PHASE 0x01 #define CMD_PHASE 0x02 #define STATUS_PHASE 0x03 #define BUS_FREE_PHASE 0x04 #define ARB_SEL_PHASE 0x05 /* Fuji chip combines arbitration with sel. */ #define MESG_OUT_PHASE 0x06 #define MESG_IN_PHASE 0x07 #define MSG_CMD_COMPLETE 0x00 #define MSG_EXT_MESSAGE 0x01 #define MSG_SAVE_DATA_PTR 0x02 #define MSG_RESTORE_PTR 0x03 #define MSG_DISCONNECT 0x04 #define MSG_INIT_DETECT_ERROR 0x05 #define MSG_ABORT 0x06 #define MSG_REJECT 0x07 #define MSG_NOOP 0x08 #define MSG_PARITY_ERROR 0x09 #define MSG_BUS_DEVICE_RESET 0x0C #define MSG_IDENTIFY 0x80 #define MSG_IDENTIFY_DR 0xc0 /* (disconnect/reconnect allowed) */ #define MSG_SYNC_REQ 0x01 #define MSG_ISIDENTIFY(x) (x&MSG_IDENTIFY) #define IFY_TRN 0x20 #define IFY_LUNTRN(x) (x&0x07) #define IFY_LUN(x) (!(x&0x20)) /* Check if high bit set */ #define STS_CHECKCOND 0x02 /* Check Condition (ie., read sense) */ #define STS_CONDMET 0x04 /* Condition Met (ie., search worked) */ #define STS_BUSY 0x08 #define STS_INTERMED 0x10 /* Intermediate status sent */ #define STS_EXT 0x80 /* Extended status valid */ /* States returned by our state machine */ #define SBIC_STATE_ERROR -1 #define SBIC_STATE_DONE 0 #define SBIC_STATE_RUNNING 1 #define SBIC_STATE_DISCONNECT 2 /* * XXXX */ struct scsi_fmt_cdb { int len; /* cdb length (in bytes) */ u_char cdb[28]; /* cdb to use on next read/write */ }; struct buf; struct scsi_xfer; void sbic_minphys __P((struct buf *bp)); int sbic_scsicmd __P((struct scsi_xfer *)); void sbicinit __P((struct sbic_softc *)); int sbicintr __P((struct sbic_softc *)); #ifdef DEBUG void sbic_dump __P((struct sbic_softc *dev)); #endif #endif /* _SBICVAR_H_ */