/* $OpenBSD: sci.c,v 1.4 1996/05/29 10:15:40 niklas Exp $ */ /* $NetBSD: sci.c,v 1.17 1996/05/12 02:26:19 mhitch Exp $ */ /* * Copyright (c) 1994 Michael L. Hitch * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Van Jacobson of Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)scsi.c 7.5 (Berkeley) 5/4/91 */ /* * AMIGA NCR 5380 scsi adaptor driver */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * SCSI delays * In u-seconds, primarily for state changes on the SPC. */ #define SCI_CMD_WAIT 50000 /* wait per step of 'immediate' cmds */ #define SCI_DATA_WAIT 50000 /* wait per data in/out step */ #define SCI_INIT_WAIT 50000 /* wait per step (both) during init */ #define b_cylin b_resid int sciicmd __P((struct sci_softc *, int, void *, int, void *, int,u_char)); int scigo __P((struct sci_softc *, struct scsi_xfer *)); int scigetsense __P((struct sci_softc *, struct scsi_xfer *)); int sciselectbus __P((struct sci_softc *, u_char, u_char)); void sciabort __P((struct sci_softc *, char *)); void scierror __P((struct sci_softc *, u_char)); void scisetdelay __P((int)); void sci_scsidone __P((struct sci_softc *, int)); void sci_donextcmd __P((struct sci_softc *)); int sci_ixfer_out __P((struct sci_softc *, int, register u_char *, int)); void sci_ixfer_in __P((struct sci_softc *, int, register u_char *, int)); int sci_cmd_wait = SCI_CMD_WAIT; int sci_data_wait = SCI_DATA_WAIT; int sci_init_wait = SCI_INIT_WAIT; int sci_no_dma = 0; #ifdef DEBUG #define QPRINTF(a) if (sci_debug > 1) printf a int sci_debug = 0; #else #define QPRINTF(a) #endif /* * default minphys routine for sci based controllers */ void sci_minphys(bp) struct buf *bp; { /* * No max transfer at this level. */ minphys(bp); } /* * used by specific sci controller * * it appears that the higher level code does nothing with LUN's * so I will too. I could plug it in, however so could they * in scsi_scsi_cmd(). */ int sci_scsicmd(xs) struct scsi_xfer *xs; { struct sci_pending *pendp; struct sci_softc *dev; struct scsi_link *slp; int flags, s; slp = xs->sc_link; dev = slp->adapter_softc; flags = xs->flags; if (flags & SCSI_DATA_UIO) panic("sci: scsi data uio requested"); if (dev->sc_xs && flags & SCSI_POLL) panic("sci_scsicmd: busy"); s = splbio(); pendp = &dev->sc_xsstore[slp->target][slp->lun]; if (pendp->xs) { splx(s); return(TRY_AGAIN_LATER); } if (dev->sc_xs) { pendp->xs = xs; TAILQ_INSERT_TAIL(&dev->sc_xslist, pendp, link); splx(s); return(SUCCESSFULLY_QUEUED); } pendp->xs = NULL; dev->sc_xs = xs; splx(s); /* * nothing is pending do it now. */ sci_donextcmd(dev); if (flags & SCSI_POLL) return(COMPLETE); return(SUCCESSFULLY_QUEUED); } /* * entered with dev->sc_xs pointing to the next xfer to perform */ void sci_donextcmd(dev) struct sci_softc *dev; { struct scsi_xfer *xs; struct scsi_link *slp; int flags, phase, stat; xs = dev->sc_xs; slp = xs->sc_link; flags = xs->flags; if (flags & SCSI_DATA_IN) phase = DATA_IN_PHASE; else if (flags & SCSI_DATA_OUT) phase = DATA_OUT_PHASE; else phase = STATUS_PHASE; if (flags & SCSI_RESET) scireset(dev); dev->sc_stat[0] = -1; xs->cmd->bytes[0] |= slp->lun << 5; if (phase == STATUS_PHASE || flags & SCSI_POLL) stat = sciicmd(dev, slp->target, xs->cmd, xs->cmdlen, xs->data, xs->datalen, phase); else if (scigo(dev, xs) == 0) return; else stat = dev->sc_stat[0]; sci_scsidone(dev, stat); } void sci_scsidone(dev, stat) struct sci_softc *dev; int stat; { struct sci_pending *pendp; struct scsi_xfer *xs; int s, donext; xs = dev->sc_xs; #ifdef DIAGNOSTIC if (xs == NULL) panic("sci_scsidone"); #endif /* * is this right? */ xs->status = stat; if (stat == 0) xs->resid = 0; else { switch(stat) { case SCSI_CHECK: stat = scigetsense(dev, xs); if (stat != 0) goto bad_sense; xs->error = XS_SENSE; break; case SCSI_BUSY: xs->error = XS_BUSY; break; bad_sense: default: xs->error = XS_DRIVER_STUFFUP; QPRINTF(("sci_scsicmd() bad %x\n", stat)); break; } } xs->flags |= ITSDONE; /* * grab next command before scsi_done() * this way no single device can hog scsi resources. */ s = splbio(); pendp = dev->sc_xslist.tqh_first; if (pendp == NULL) { donext = 0; dev->sc_xs = NULL; } else { donext = 1; TAILQ_REMOVE(&dev->sc_xslist, pendp, link); dev->sc_xs = pendp->xs; pendp->xs = NULL; } splx(s); scsi_done(xs); if (donext) sci_donextcmd(dev); } int scigetsense(dev, xs) struct sci_softc *dev; struct scsi_xfer *xs; { struct scsi_sense rqs; struct scsi_link *slp; slp = xs->sc_link; rqs.opcode = REQUEST_SENSE; rqs.byte2 = slp->lun << 5; #ifdef not_yet rqs.length = xs->req_sense_length ? xs->req_sense_length : sizeof(xs->sense); #else rqs.length = sizeof(xs->sense); #endif rqs.unused[0] = rqs.unused[1] = rqs.control = 0; return(sciicmd(dev, slp->target, &rqs, sizeof(rqs), &xs->sense, rqs.length, DATA_IN_PHASE)); } void sciabort(dev, where) struct sci_softc *dev; char *where; { printf ("%s: abort %s: csr = 0x%02x, bus = 0x%02x\n", dev->sc_dev.dv_xname, where, *dev->sci_csr, *dev->sci_bus_csr); if (dev->sc_flags & SCI_SELECTED) { /* lets just hope it worked.. */ dev->sc_flags &= ~SCI_SELECTED; /* XXX */ scireset (dev); } } /* * XXX Set/reset long delays. * * if delay == 0, reset default delays * if delay < 0, set both delays to default long initialization values * if delay > 0, set both delays to this value * * Used when a devices is expected to respond slowly (e.g. during * initialization). */ void scisetdelay(del) int del; { static int saved_cmd_wait, saved_data_wait; if (del) { saved_cmd_wait = sci_cmd_wait; saved_data_wait = sci_data_wait; if (del > 0) sci_cmd_wait = sci_data_wait = del; else sci_cmd_wait = sci_data_wait = sci_init_wait; } else { sci_cmd_wait = saved_cmd_wait; sci_data_wait = saved_data_wait; } } void scireset(dev) struct sci_softc *dev; { u_int s; u_char my_id; dev->sc_flags &= ~SCI_SELECTED; if (dev->sc_flags & SCI_ALIVE) sciabort(dev, "reset"); printf("%s: ", dev->sc_dev.dv_xname); s = splbio(); /* preserve our ID for now */ my_id = 7; /* * Reset the chip */ *dev->sci_icmd = SCI_ICMD_TEST; *dev->sci_icmd = SCI_ICMD_TEST | SCI_ICMD_RST; delay (25); *dev->sci_icmd = 0; /* * Set up various chip parameters */ *dev->sci_icmd = 0; *dev->sci_tcmd = 0; *dev->sci_sel_enb = 0; /* anything else was zeroed by reset */ splx (s); printf("sci id %d\n", my_id); dev->sc_flags |= SCI_ALIVE; } void scierror(dev, csr) struct sci_softc *dev; u_char csr; { struct scsi_xfer *xs; xs = dev->sc_xs; #ifdef DIAGNOSTIC if (xs == NULL) panic("scierror"); #endif if (xs->flags & SCSI_SILENT) return; printf("%s: ", dev->sc_dev.dv_xname); printf("csr == 0x%02i\n", csr); /* XXX */ } /* * select the bus, return when selected or error. */ int sciselectbus(dev, target, our_addr) struct sci_softc *dev; u_char target, our_addr; { register int timeo = 2500; QPRINTF (("sciselectbus %d\n", target)); /* if we're already selected, return */ if (dev->sc_flags & SCI_SELECTED) /* XXXX */ return 1; if ((*dev->sci_bus_csr & (SCI_BUS_BSY|SCI_BUS_SEL)) && (*dev->sci_bus_csr & (SCI_BUS_BSY|SCI_BUS_SEL)) && (*dev->sci_bus_csr & (SCI_BUS_BSY|SCI_BUS_SEL))) return 1; *dev->sci_tcmd = 0; *dev->sci_odata = 0x80 + (1 << target); *dev->sci_icmd = SCI_ICMD_DATA|SCI_ICMD_SEL; while ((*dev->sci_bus_csr & SCI_BUS_BSY) == 0) { if (--timeo > 0) { delay(100); } else { break; } } if (timeo) { *dev->sci_icmd = 0; dev->sc_flags |= SCI_SELECTED; return (0); } *dev->sci_icmd = 0; return (1); } int sci_ixfer_out(dev, len, buf, phase) register struct sci_softc *dev; int len; register u_char *buf; int phase; { register int wait = sci_data_wait; u_char csr; QPRINTF(("sci_ixfer_out {%d} %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", len, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], buf[8], buf[9])); *dev->sci_tcmd = phase; *dev->sci_icmd = SCI_ICMD_DATA; for (;len > 0; len--) { csr = *dev->sci_bus_csr; while (!(csr & SCI_BUS_REQ)) { if ((csr & SCI_BUS_BSY) == 0 || --wait < 0) { #ifdef DEBUG if (sci_debug) printf("sci_ixfer_out fail: l%d i%x w%d\n", len, csr, wait); #endif return (len); } delay(1); csr = *dev->sci_bus_csr; } if (!(*dev->sci_csr & SCI_CSR_PHASE_MATCH)) break; *dev->sci_odata = *buf; *dev->sci_icmd = SCI_ICMD_DATA|SCI_ICMD_ACK; buf++; while (*dev->sci_bus_csr & SCI_BUS_REQ); *dev->sci_icmd = SCI_ICMD_DATA; } QPRINTF(("sci_ixfer_out done\n")); return (0); } void sci_ixfer_in(dev, len, buf, phase) struct sci_softc *dev; int len; register u_char *buf; int phase; { int wait = sci_data_wait; u_char csr; volatile register u_char *sci_bus_csr = dev->sci_bus_csr; volatile register u_char *sci_data = dev->sci_data; volatile register u_char *sci_icmd = dev->sci_icmd; #ifdef DEBUG u_char *obp = buf; #endif csr = *sci_bus_csr; QPRINTF(("sci_ixfer_in %d, csr=%02x\n", len, csr)); *dev->sci_tcmd = phase; *sci_icmd = 0; for (;len > 0; len--) { csr = *sci_bus_csr; while (!(csr & SCI_BUS_REQ)) { if (!(csr & SCI_BUS_BSY) || --wait < 0) { #ifdef DEBUG if (sci_debug) printf("sci_ixfer_in fail: l%d i%x w%d\n", len, csr, wait); #endif return; } delay(1); csr = *sci_bus_csr; } if (!(*dev->sci_csr & SCI_CSR_PHASE_MATCH)) break; *buf = *sci_data; *sci_icmd = SCI_ICMD_ACK; buf++; while (*sci_bus_csr & SCI_BUS_REQ); *sci_icmd = 0; } QPRINTF(("sci_ixfer_in {%d} %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", len, obp[0], obp[1], obp[2], obp[3], obp[4], obp[5], obp[6], obp[7], obp[8], obp[9])); } /* * SCSI 'immediate' command: issue a command to some SCSI device * and get back an 'immediate' response (i.e., do programmed xfer * to get the response data). 'cbuf' is a buffer containing a scsi * command of length clen bytes. 'buf' is a buffer of length 'len' * bytes for data. The transfer direction is determined by the device * (i.e., by the scsi bus data xfer phase). If 'len' is zero, the * command must supply no data. 'xferphase' is the bus phase the * caller expects to happen after the command is issued. It should * be one of DATA_IN_PHASE, DATA_OUT_PHASE or STATUS_PHASE. */ int sciicmd(dev, target, cbuf, clen, buf, len, xferphase) struct sci_softc *dev; void *cbuf, *buf; int clen, len; u_char xferphase; { u_char phase; register int wait; /* select the SCSI bus (it's an error if bus isn't free) */ if (sciselectbus (dev, target, dev->sc_scsi_addr)) return -1; /* * Wait for a phase change (or error) then let the device * sequence us through the various SCSI phases. */ dev->sc_stat[0] = 0xff; dev->sc_msg[0] = 0xff; phase = CMD_PHASE; while (1) { wait = sci_cmd_wait; while ((*dev->sci_bus_csr & (SCI_BUS_REQ|SCI_BUS_BSY)) == SCI_BUS_BSY); QPRINTF((">CSR:%02x<", *dev->sci_bus_csr)); if ((*dev->sci_bus_csr & SCI_BUS_REQ) == 0) { return -1; } phase = SCI_PHASE(*dev->sci_bus_csr); switch (phase) { case CMD_PHASE: if (sci_ixfer_out (dev, clen, cbuf, phase)) goto abort; phase = xferphase; break; case DATA_IN_PHASE: if (len <= 0) goto abort; wait = sci_data_wait; sci_ixfer_in (dev, len, buf, phase); phase = STATUS_PHASE; break; case DATA_OUT_PHASE: if (len <= 0) goto abort; wait = sci_data_wait; if (sci_ixfer_out (dev, len, buf, phase)) goto abort; phase = STATUS_PHASE; break; case MESG_IN_PHASE: dev->sc_msg[0] = 0xff; sci_ixfer_in (dev, 1, dev->sc_msg,phase); dev->sc_flags &= ~SCI_SELECTED; while (*dev->sci_bus_csr & SCI_BUS_BSY); goto out; break; case MESG_OUT_PHASE: phase = STATUS_PHASE; break; case STATUS_PHASE: sci_ixfer_in (dev, 1, dev->sc_stat, phase); phase = MESG_IN_PHASE; break; case BUS_FREE_PHASE: goto out; default: printf("sci: unexpected phase %d in icmd from %d\n", phase, target); goto abort; } #if 0 if (wait <= 0) goto abort; #endif } abort: sciabort(dev, "icmd"); out: QPRINTF(("=STS:%02x=", dev->sc_stat[0])); return (dev->sc_stat[0]); } int scigo(dev, xs) struct sci_softc *dev; struct scsi_xfer *xs; { int count, target; u_char phase, *addr; target = xs->sc_link->target; count = xs->datalen; addr = xs->data; if (sci_no_dma) { sciicmd (dev, target, (u_char *) xs->cmd, xs->cmdlen, addr, count, xs->flags & SCSI_DATA_IN ? DATA_IN_PHASE : DATA_OUT_PHASE); return (1); } /* select the SCSI bus (it's an error if bus isn't free) */ if (sciselectbus (dev, target, dev->sc_scsi_addr)) return -1; /* * Wait for a phase change (or error) then let the device * sequence us through the various SCSI phases. */ dev->sc_stat[0] = 0xff; dev->sc_msg[0] = 0xff; phase = CMD_PHASE; while (1) { while ((*dev->sci_bus_csr & (SCI_BUS_REQ|SCI_BUS_BSY)) == SCI_BUS_BSY); QPRINTF((">CSR:%02x<", *dev->sci_bus_csr)); if ((*dev->sci_bus_csr & SCI_BUS_REQ) == 0) { goto abort; } phase = SCI_PHASE(*dev->sci_bus_csr); switch (phase) { case CMD_PHASE: if (sci_ixfer_out (dev, xs->cmdlen, (u_char *) xs->cmd, phase)) goto abort; phase = xs->flags & SCSI_DATA_IN ? DATA_IN_PHASE : DATA_OUT_PHASE; break; case DATA_IN_PHASE: if (count <= 0) goto abort; /* XXX use psuedo DMA if available */ if (count >= 128 && dev->dma_xfer_in) (*dev->dma_xfer_in)(dev, count, addr, phase); else sci_ixfer_in (dev, count, addr, phase); phase = STATUS_PHASE; break; case DATA_OUT_PHASE: if (count <= 0) goto abort; /* XXX use psuedo DMA if available */ if (count >= 128 && dev->dma_xfer_out) (*dev->dma_xfer_out)(dev, count, addr, phase); else if (sci_ixfer_out (dev, count, addr, phase)) goto abort; phase = STATUS_PHASE; break; case MESG_IN_PHASE: dev->sc_msg[0] = 0xff; sci_ixfer_in (dev, 1, dev->sc_msg,phase); dev->sc_flags &= ~SCI_SELECTED; while (*dev->sci_bus_csr & SCI_BUS_BSY); goto out; break; case MESG_OUT_PHASE: phase = STATUS_PHASE; break; case STATUS_PHASE: sci_ixfer_in (dev, 1, dev->sc_stat, phase); phase = MESG_IN_PHASE; break; case BUS_FREE_PHASE: goto out; default: printf("sci: unexpected phase %d in icmd from %d\n", phase, target); goto abort; } } abort: sciabort(dev, "go"); out: QPRINTF(("=STS:%02x=", dev->sc_stat[0])); return (1); }