/* $OpenBSD: ser.c,v 1.6 1997/01/16 09:25:22 niklas Exp $ */ /* $NetBSD: ser.c,v 1.39 1996/12/23 09:10:29 veego Exp $ */ /* * Copyright (c) 1982, 1986, 1990 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)ser.c 7.12 (Berkeley) 6/27/91 */ /* * XXX This file needs major cleanup it will never service more than one * XXX unit. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ser.h" #if NSER > 0 void serattach __P((struct device *, struct device *, void *)); int sermatch __P((struct device *, void *, void *)); struct ser_softc { struct device dev; struct tty *ser_tty; }; struct cfattach ser_ca = { sizeof(struct ser_softc), sermatch, serattach }; struct cfdriver ser_cd = { NULL, "ser", DV_TTY, NULL, 0 }; #ifndef SEROBUF_SIZE #define SEROBUF_SIZE 32 #endif #ifndef SERIBUF_SIZE #define SERIBUF_SIZE 512 #endif #define splser() spl5() void serstart __P((struct tty *)); int serparam __P((struct tty *, struct termios *)); void serintr __P((int)); int serhwiflow __P((struct tty *, int)); int sermctl __P((dev_t dev, int, int)); void ser_fastint __P((void)); void sereint __P((int, int)); static void ser_putchar __P((struct tty *, u_short)); void ser_outintr __P((void)); void sercnprobe __P((struct consdev *)); void sercninit __P((struct consdev *)); void serinit __P((int, int)); int sercngetc __P((dev_t dev)); void sercnputc __P((dev_t, int)); void sercnpollc __P((dev_t, int)); int ser_active; int ser_hasfifo; int nser = NSER; #ifdef SERCONSOLE int serconsole = SERCONSOLE; #else int serconsole = -1; #endif int serconsinit; int serdefaultrate = TTYDEF_SPEED; int sermajor; int serswflags; #define SWFLAGS(dev) (serswflags | (DIALOUT(dev) ? TIOCFLAG_SOFTCAR : 0)) struct vbl_node ser_vbl_node[NSER]; struct tty ser_cons; struct tty *ser_tty[NSER]; /* * Since this UART is not particularly bright (to put it nicely), we'll * have to do parity stuff on our own. This table contains the 8th bit * in 7bit character mode, for even parity. If you want odd parity, * flip the bit. (for generation of the table, see genpar.c) */ u_char even_parity[] = { 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, }; /* * Since we don't get interrupts for changes on the modem control line, * we'll have to fake them by comparing current settings to the settings * we remembered on last invocation. */ u_char last_ciab_pra; extern struct tty *constty; #ifdef KGDB #include extern dev_t kgdb_dev; extern int kgdb_rate; extern int kgdb_debug_init; #endif #ifdef DEBUG long fifoin[17]; long fifoout[17]; long serintrcount[16]; long sermintcount[16]; #endif void sermint __P((register int unit)); int sermatch(pdp, match, auxp) struct device *pdp; void *match, *auxp; { struct cfdata *cfp = match; if (matchname("ser", (char *)auxp) == 0 || cfp->cf_unit != 0) return(0); if (serconsole != 0 && amiga_realconfig == 0) return(0); return(1); } void serattach(pdp, dp, auxp) struct device *pdp, *dp; void *auxp; { u_short ir; ir = custom.intenar; if (serconsole == 0) DELAY(100000); ser_active |= 1; ser_vbl_node[0].function = (void (*) (void *)) sermint; add_vbl_function(&ser_vbl_node[0], SER_VBL_PRIORITY, (void *) 0); #ifdef KGDB if (kgdb_dev == makedev(sermajor, 0)) { if (serconsole == 0) kgdb_dev = NODEV; /* can't debug over console port */ else { (void) serinit(0, kgdb_rate); serconsinit = 1; /* don't re-init in serputc */ if (kgdb_debug_init == 0) printf(" kgdb enabled\n"); else { /* * Print prefix of device name, * let kgdb_connect print the rest. */ printf("ser0: "); kgdb_connect(1); } } } #endif /* * Need to reset baud rate, etc. of next print so reset serconsinit. */ if (0 == serconsole) serconsinit = 0; if (dp) printf(": input fifo %d output fifo %d\n", SERIBUF_SIZE, SEROBUF_SIZE); } /* ARGSUSED */ int seropen(dev, flag, mode, p) dev_t dev; int flag, mode; struct proc *p; { struct tty *tp; int unit, error, s; error = 0; unit = SERUNIT(dev); if (unit >= NSER || (ser_active & (1 << unit)) == 0) return (ENXIO); s = spltty(); if (ser_tty[unit]) tp = ser_tty[unit]; else { tp = ((struct ser_softc *)ser_cd.cd_devs[unit])->ser_tty = ser_tty[unit] = ttymalloc(); tty_attach(tp); } tp->t_oproc = (void (*) (struct tty *)) serstart; tp->t_param = serparam; tp->t_dev = dev; tp->t_hwiflow = serhwiflow; if ((tp->t_state & TS_ISOPEN) == 0) { tp->t_state |= TS_WOPEN; ttychars(tp); if (tp->t_ispeed == 0) { /* * only when cleared do we reset to defaults. */ tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; tp->t_cflag = TTYDEF_CFLAG; tp->t_lflag = TTYDEF_LFLAG; tp->t_ispeed = tp->t_ospeed = serdefaultrate; } /* * do these all the time */ if (serswflags & TIOCFLAG_CLOCAL) tp->t_cflag |= CLOCAL; if (serswflags & TIOCFLAG_CRTSCTS) tp->t_cflag |= CRTSCTS; if (serswflags & TIOCFLAG_MDMBUF) tp->t_cflag |= MDMBUF; serparam(tp, &tp->t_termios); ttsetwater(tp); (void)sermctl(dev, TIOCM_DTR | TIOCM_RTS, DMSET); if ((SWFLAGS(dev) & TIOCFLAG_SOFTCAR) || (sermctl(dev, 0, DMGET) & TIOCM_CD)) tp->t_state |= TS_CARR_ON; else tp->t_state &= ~TS_CARR_ON; } else if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) { splx(s); return(EBUSY); } /* * if NONBLOCK requested, ignore carrier */ if (flag & O_NONBLOCK) goto done; /* * block waiting for carrier */ while ((tp->t_state & TS_CARR_ON) == 0 && (tp->t_cflag & CLOCAL) == 0) { tp->t_state |= TS_WOPEN; error = ttysleep(tp, (caddr_t)&tp->t_rawq, TTIPRI | PCATCH, ttopen, 0); if (error) { splx(s); return(error); } } done: /* This is a way to handle lost XON characters */ if ((flag & O_TRUNC) && (tp->t_state & TS_TTSTOP)) { tp->t_state &= ~TS_TTSTOP; ttstart (tp); } splx(s); /* * Reset the tty pointer, as there could have been a dialout * use of the tty with a dialin open waiting. */ tp->t_dev = dev; return((*linesw[tp->t_line].l_open)(dev, tp)); } /*ARGSUSED*/ int serclose(dev, flag, mode, p) dev_t dev; int flag, mode; struct proc *p; { struct tty *tp; int unit; unit = SERUNIT(dev); tp = ser_tty[unit]; (*linesw[tp->t_line].l_close)(tp, flag); custom.adkcon = ADKCONF_UARTBRK; /* clear break */ #ifdef KGDB /* * do not disable interrupts if debugging */ if (dev != kgdb_dev) #endif custom.intena = INTF_RBF | INTF_TBE; /* disable interrups */ custom.intreq = INTF_RBF | INTF_TBE; /* clear intr req */ /* * If the device is closed, it's close, no matter whether we deal with * modem control signals nor not. */ #if 0 if (tp->t_cflag & HUPCL || tp->t_state & TS_WOPEN || (tp->t_state & TS_ISOPEN) == 0) #endif ttyclose(tp); #if not_yet if (tp != &ser_cons) { remove_vbl_function(&ser_vbl_node[unit]); ttyfree(tp); ser_tty[unit] = (struct tty *) NULL; } #endif return (0); } int serread(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { struct tty *tp; if ((tp = ser_tty[SERUNIT(dev)]) == NULL) return(ENXIO); return((*linesw[tp->t_line].l_read)(tp, uio, flag)); } int serwrite(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { struct tty *tp; if((tp = ser_tty[SERUNIT(dev)]) == NULL) return(ENXIO); return((*linesw[tp->t_line].l_write)(tp, uio, flag)); } struct tty * sertty(dev) dev_t dev; { return (ser_tty[SERUNIT(dev)]); } /* * We don't do any processing of data here, so we store the raw code * obtained from the uart register. In theory, 110kBaud gives you * 11kcps, so 16k buffer should be more than enough, interrupt * latency of 1s should never happen, or something is seriously * wrong.. */ static u_short serbuf[SERIBUF_SIZE]; static u_short *sbrpt = serbuf; static u_short *sbwpt = serbuf; static u_short sbcnt; static u_short sbovfl; /* * This is a replacement for the lack of a hardware fifo. 32k should be * enough (there's only one unit anyway, so this is not going to * accumulate). */ void ser_fastint() { /* * We're at RBE-level, which is higher than VBL-level which is used * to periodically transmit contents of this buffer up one layer, * so no spl-raising is necessary. */ register u_short ints, code; ints = custom.intreqr & INTF_RBF; if (ints == 0) return; /* * clear interrupt */ custom.intreq = ints; /* * this register contains both data and status bits! */ code = custom.serdatr; /* * check for buffer overflow. */ if (sbcnt == SERIBUF_SIZE) { ++sbovfl; return; } /* * store in buffer */ *sbwpt++ = code; if (sbwpt == serbuf + SERIBUF_SIZE) sbwpt = serbuf; ++sbcnt; if (sbcnt > SERIBUF_SIZE - 20) CLRRTS(ciab.pra); /* drop RTS if buffer almost full */ } void serintr(unit) int unit; { int s1, s2, ovfl; struct tty *tp = ser_tty[unit]; /* * Make sure we're not interrupted by another * vbl, but allow level5 ints */ s1 = spltty(); /* * pass along any acumulated information */ while (sbcnt > 0 && (tp->t_state & TS_TBLOCK) == 0) { /* * no collision with ser_fastint() */ sereint(unit, *sbrpt++); ovfl = 0; /* lock against ser_fastint() */ s2 = splser(); sbcnt--; if (sbrpt == serbuf + SERIBUF_SIZE) sbrpt = serbuf; if (sbovfl != 0) { ovfl = sbovfl; sbovfl = 0; } splx(s2); if (ovfl != 0) log(LOG_WARNING, "ser0: %d ring buffer overflows.\n", ovfl); } s2 = splser(); if (sbcnt == 0 && (tp->t_state & TS_TBLOCK) == 0) SETRTS(ciab.pra); /* start accepting data again */ splx(s2); splx(s1); } void sereint(unit, stat) int unit, stat; { struct tty *tp; u_char ch; int c; tp = ser_tty[unit]; ch = stat & 0xff; c = ch; if ((tp->t_state & TS_ISOPEN) == 0) { #ifdef KGDB /* we don't care about parity errors */ if (kgdb_dev == makedev(sermajor, unit) && c == FRAME_END) kgdb_connect(0); /* trap into kgdb */ #endif return; } /* * Check for break and (if enabled) parity error. */ if ((stat & 0x1ff) == 0) c |= TTY_FE; else if ((tp->t_cflag & PARENB) && (((ch >> 7) + even_parity[ch & 0x7f] + !!(tp->t_cflag & PARODD)) & 1)) c |= TTY_PE; if (stat & SERDATRF_OVRUN) log(LOG_WARNING, "ser0: silo overflow\n"); (*linesw[tp->t_line].l_rint)(c, tp); } /* * This interrupt is periodically invoked in the vertical blank * interrupt. It's used to keep track of the modem control lines * and (new with the fast_int code) to move accumulated data * up into the tty layer. */ void sermint(unit) int unit; { struct tty *tp; u_char stat, last, istat; tp = ser_tty[unit]; if (!tp) return; if ((tp->t_state & (TS_ISOPEN | TS_WOPEN)) == 0) { sbrpt = sbwpt = serbuf; return; } /* * empty buffer */ serintr(unit); stat = ciab.pra; last = last_ciab_pra; last_ciab_pra = stat; /* * check whether any interesting signal changed state */ istat = stat ^ last; if ((istat & CIAB_PRA_CD) && (SWFLAGS(tp->t_dev) & TIOCFLAG_SOFTCAR) == 0) { if (ISDCD(stat)) (*linesw[tp->t_line].l_modem)(tp, 1); else if ((*linesw[tp->t_line].l_modem)(tp, 0) == 0) { CLRDTR(stat); CLRRTS(stat); ciab.pra = stat; last_ciab_pra = stat; } } if ((istat & CIAB_PRA_CTS) && (tp->t_state & TS_ISOPEN) && (tp->t_cflag & CRTSCTS)) { #if 0 /* the line is up and we want to do rts/cts flow control */ if (ISCTS(stat)) { tp->t_state &= ~TS_TTSTOP; ttstart(tp); /* cause tbe-int if we were stuck there */ custom.intreq = INTF_SETCLR | INTF_TBE; } else tp->t_state |= TS_TTSTOP; #else /* do this on hardware level, not with tty driver */ if (ISCTS(stat)) { tp->t_state &= ~TS_TTSTOP; /* cause TBE interrupt */ custom.intreq = INTF_SETCLR | INTF_TBE; } #endif } } int serioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { register struct tty *tp; register int unit = SERUNIT(dev); register int error; tp = ser_tty[unit]; if (!tp) return ENXIO; error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); if (error >= 0) return(error); error = ttioctl(tp, cmd, data, flag, p); if (error >= 0) return(error); switch (cmd) { case TIOCSBRK: custom.adkcon = ADKCONF_SETCLR | ADKCONF_UARTBRK; break; case TIOCCBRK: custom.adkcon = ADKCONF_UARTBRK; break; case TIOCSDTR: (void) sermctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIS); break; case TIOCCDTR: (void) sermctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIC); break; case TIOCMSET: (void) sermctl(dev, *(int *) data, DMSET); break; case TIOCMBIS: (void) sermctl(dev, *(int *) data, DMBIS); break; case TIOCMBIC: (void) sermctl(dev, *(int *) data, DMBIC); break; case TIOCMGET: *(int *)data = sermctl(dev, 0, DMGET); break; case TIOCGFLAGS: *(int *)data = SWFLAGS(dev); break; case TIOCSFLAGS: error = suser(p->p_ucred, &p->p_acflag); if (error != 0) return(EPERM); serswflags = *(int *)data; serswflags &= /* only allow valid flags */ (TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL | TIOCFLAG_CRTSCTS); break; default: return(ENOTTY); } return(0); } int serparam(tp, t) struct tty *tp; struct termios *t; { int cflag, unit, ospeed = 0; cflag = t->c_cflag; unit = SERUNIT(tp->t_dev); if (t->c_ospeed > 0) { if (t->c_ospeed < 110) return(EINVAL); ospeed = SERBRD(t->c_ospeed); } if (t->c_ispeed && t->c_ispeed != t->c_ospeed) return(EINVAL); /* * copy to tty */ tp->t_ispeed = t->c_ispeed; tp->t_ospeed = t->c_ospeed; tp->t_cflag = cflag; /* * enable interrupts */ custom.intena = INTF_SETCLR | INTF_RBF | INTF_TBE; last_ciab_pra = ciab.pra; if (t->c_ospeed == 0) (void)sermctl(tp->t_dev, 0, DMSET); /* hang up line */ else { /* * (re)enable DTR * and set baud rate. (8 bit mode) */ (void)sermctl(tp->t_dev, TIOCM_DTR | TIOCM_RTS, DMSET); custom.serper = (0 << 15) | ospeed; } return(0); } int serhwiflow(tp, flag) struct tty *tp; int flag; { #if 0 printf ("serhwiflow %d\n", flag); #endif if (flag) CLRRTS(ciab.pra); else SETRTS(ciab.pra); return 1; } static void ser_putchar(tp, c) struct tty *tp; u_short c; { if ((tp->t_cflag & CSIZE) == CS7 || (tp->t_cflag & PARENB)) c &= 0x7f; /* * handle parity if necessary */ if (tp->t_cflag & PARENB) { if (even_parity[c]) c |= 0x80; if (tp->t_cflag & PARODD) c ^= 0x80; } /* * add stop bit(s) */ if (tp->t_cflag & CSTOPB) c |= 0x300; else c |= 0x100; custom.serdat = c; } static u_char ser_outbuf[SEROBUF_SIZE]; static u_char *sob_ptr = ser_outbuf, *sob_end = ser_outbuf; void ser_outintr() { struct tty *tp = ser_tty[0]; int s; tp = ser_tty[0]; s = spltty(); if (tp == 0) goto out; if ((custom.intreqr & INTF_TBE) == 0) goto out; /* * clear interrupt */ custom.intreq = INTF_TBE; if (sob_ptr == sob_end) { tp->t_state &= ~(TS_BUSY | TS_FLUSH); if (tp->t_line) (*linesw[tp->t_line].l_start)(tp); else serstart(tp); goto out; } /* * Do hardware flow control here. if the CTS line goes down, don't * transmit anything. That way, we'll be restarted by the periodic * interrupt when CTS comes back up. */ if (ISCTS(ciab.pra)) ser_putchar(tp, *sob_ptr++); else CLRCTS(last_ciab_pra); /* Remember that CTS is off */ out: splx(s); } void serstart(tp) struct tty *tp; { int cc, s, unit, hiwat; hiwat = 0; if ((tp->t_state & TS_ISOPEN) == 0) return; unit = SERUNIT(tp->t_dev); s = spltty(); if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP)) goto out; cc = tp->t_outq.c_cc; if (cc <= tp->t_lowat) { if (tp->t_state & TS_ASLEEP) { tp->t_state &= ~TS_ASLEEP; wakeup((caddr_t) & tp->t_outq); } selwakeup(&tp->t_wsel); } if (cc == 0 || (tp->t_state & TS_BUSY)) goto out; /* * We only do bulk transfers if using CTSRTS flow control, not for * (probably sloooow) ixon/ixoff devices. */ if ((tp->t_cflag & CRTSCTS) == 0) cc = 1; /* * Limit the amount of output we do in one burst * to prevent hogging the CPU. */ if (cc > SEROBUF_SIZE) { hiwat++; cc = SEROBUF_SIZE; } cc = q_to_b(&tp->t_outq, ser_outbuf, cc); if (cc > 0) { tp->t_state |= TS_BUSY; sob_ptr = ser_outbuf; sob_end = ser_outbuf + cc; /* * Get first character out, then have TBE-interrupts blow out * further characters, until buffer is empty, and TS_BUSY gets * cleared. */ ser_putchar(tp, *sob_ptr++); } out: splx(s); } /* * Stop output on a line. */ /*ARGSUSED*/ int serstop(tp, flag) struct tty *tp; int flag; { int s; s = spltty(); if (tp->t_state & TS_BUSY) { if ((tp->t_state & TS_TTSTOP) == 0) tp->t_state |= TS_FLUSH; } splx(s); return 0; } int sermctl(dev, bits, how) dev_t dev; int bits, how; { int unit, s; u_char ub = 0; unit = SERUNIT(dev); /* * convert TIOCM* mask into CIA mask * which is active low */ if (how != DMGET) { ub = 0; if (bits & TIOCM_DTR) ub |= CIAB_PRA_DTR; if (bits & TIOCM_RTS) ub |= CIAB_PRA_RTS; if (bits & TIOCM_CTS) ub |= CIAB_PRA_CTS; if (bits & TIOCM_CD) ub |= CIAB_PRA_CD; if (bits & TIOCM_RI) ub |= CIAB_PRA_SEL; /* collision with /dev/par ! */ if (bits & TIOCM_DSR) ub |= CIAB_PRA_DSR; } s = spltty(); switch (how) { case DMSET: /* invert and set */ ciab.pra = ~ub; break; case DMBIC: ciab.pra |= ub; ub = ~ciab.pra; break; case DMBIS: ciab.pra &= ~ub; ub = ~ciab.pra; break; case DMGET: ub = ~ciab.pra; break; } (void)splx(s); bits = 0; if (ub & CIAB_PRA_DTR) bits |= TIOCM_DTR; if (ub & CIAB_PRA_RTS) bits |= TIOCM_RTS; if (ub & CIAB_PRA_CTS) bits |= TIOCM_CTS; if (ub & CIAB_PRA_CD) bits |= TIOCM_CD; if (ub & CIAB_PRA_SEL) bits |= TIOCM_RI; if (ub & CIAB_PRA_DSR) bits |= TIOCM_DSR; return(bits); } /* * Following are all routines needed for SER to act as console */ void sercnprobe(cp) struct consdev *cp; { int unit = CONUNIT; /* locate the major number */ for (sermajor = 0; sermajor < nchrdev; sermajor++) if (cdevsw[sermajor].d_open == (void *)seropen) break; unit = CONUNIT; /* XXX: ick */ /* * initialize required fields */ cp->cn_dev = makedev(sermajor, unit); if (serconsole == unit) cp->cn_pri = CN_REMOTE; else cp->cn_pri = CN_NORMAL; #ifdef KGDB if (major(kgdb_dev) == 1) /* XXX */ kgdb_dev = makedev(sermajor, minor(kgdb_dev)); #endif } void sercninit(cp) struct consdev *cp; { int unit; unit = SERUNIT(cp->cn_dev); serinit(unit, serdefaultrate); serconsole = unit; serconsinit = 1; } void serinit(unit, rate) int unit, rate; { int s; s = splser(); /* * might want to fiddle with the CIA later ??? */ custom.serper = (rate>=110 ? SERBRD(rate) : 0); splx(s); } int sercngetc(dev) dev_t dev; { u_short stat; int c, s; s = splser(); /* * poll */ while (((stat = custom.serdatr & 0xffff) & SERDATRF_RBF) == 0) ; c = stat & 0xff; /* * clear interrupt */ custom.intreq = INTF_RBF; splx(s); return(c); } /* * Console kernel output character routine. */ void sercnputc(dev, c) dev_t dev; int c; { register int timo; int s; s = splhigh(); if (serconsinit == 0) { (void)serinit(SERUNIT(dev), serdefaultrate); serconsinit = 1; } /* * wait for any pending transmission to finish */ timo = 50000; while (!(custom.serdatr & SERDATRF_TBE) && --timo); /* * transmit char. */ custom.serdat = (c & 0xff) | 0x100; /* * wait for this transmission to complete */ timo = 1500000; while (!(custom.serdatr & SERDATRF_TBE) && --timo) ; /* * Wait for the device (my vt100..) to process the data, since we * don't do flow-control with cnputc */ for (timo = 0; timo < 30000; timo++) ; /* * clear any interrupts generated by this transmission */ custom.intreq = INTF_TBE; splx(s); } void sercnpollc(dev, on) dev_t dev; int on; { } #endif