/* $OpenBSD: dc21285reg.h,v 1.1 2004/02/01 05:09:49 drahn Exp $ */ /* $NetBSD: dc21285reg.h,v 1.3 2002/11/03 21:43:30 chris Exp $ */ /* * Copyright (c) 1997,1998 Mark Brinicombe. * Copyright (c) 1997,1998 Causality Limited * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Mark Brinicombe * for the NetBSD Project. * 4. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * DC21285 register definitions */ /* PCI registers in CSR space */ #define VENDOR_ID 0x00 #define DC21285_VENDOR_ID 0x1011 #define DEVICE_ID 0x02 #define DC21285_DEVICE_ID 0x1065 #define REVISION 0x08 #define CLASS 0x0A /* Other PCI control / status registers */ #define OUTBOUND_INT_STATUS 0x030 #define OUTBOUND_INT_MASK 0x034 #define I2O_INBOUND_FIFO 0x040 #define I2O_OUTBOUND_FIFO 0x044 /* Mailbox registers */ #define MAILBOX_0 0x050 #define MAILBOX_1 0x054 #define MAILBOX_2 0x058 #define MAILBOX_3 0x05C #define DOORBELL 0x060 #define DOORBELL_SETUP 0x064 #define ROM_WRITE_BYTE_ADDRESS 0x068 /* DMA Channel registers */ #define DMA_CHAN_1_BYTE_COUNT 0x80 #define DMA_CHAN_1_PCI_ADDR 0x84 #define DMA_CHAN_1_SDRAM_ADDR 0x88 #define DMA_CHAN_1_DESCRIPT 0x8C #define DMA_CHAN_1_CONTROL 0x90 #define DMA_CHAN_2_BYTE_COUNT 0xA0 #define DMA_CHAN_2_PCI_ADDR 0xA4 #define DMA_CHAN_2_SDRAM_ADDR 0xA8 #define DMA_CHAN_2_DESCRIPTOR 0xAC #define DMA_CHAN_2_CONTROL 0xB0 /* Offsets into DMA descriptor */ #define DMA_BYTE_COUNT 0 #define DMA_PCI_ADDRESS 4 #define DMA_SDRAM_ADDRESS 8 #define DMA_NEXT_DESCRIPTOR 12 /* DMA byte count register bits */ #define DMA_INTERBURST_SHIFT 24 #define DMA_PCI_TO_SDRAM 0 #define DMA_SDRAM_TO_PCI (1 << 30) #define DMA_END_CHAIN (1 << 31) /* DMA control bits */ #define DMA_ENABLE (1 << 0) #define DMA_TRANSFER_DONE (1 << 2) #define DMA_ERROR (1 << 3) #define DMA_REGISTOR_DESCRIPTOR (1 << 4) #define DMA_PCI_MEM_READ (0 << 5) #define DMA_PCI_MEM_READ_LINE (1 << 5) #define DMA_PCI_MEM_READ_MULTI1 (2 << 5) #define DMA_PCI_MEM_READ_MULTI2 (3 << 5) #define DMA_CHAIN_DONE (1 << 7) #define DMA_INTERBURST_4 (0 << 8) #define DMA_INTERBURST_8 (1 << 8) #define DMA_INTERBURST_16 (2 << 8) #define DMA_INTERBURST_32 (3 << 8) #define DMA_PCI_LENGTH_8 0 #define DMA_PCI_LENGTH_16 (1 << 15) #define DMA_SDRAM_LENGTH_1 (0 << 16) #define DMA_SDRAM_LENGTH_2 (1 << 16) #define DMA_SDRAM_LENGTH_4 (2 << 16) #define DMA_SDRAM_LENGTH_8 (3 << 16) #define DMA_SDRAM_LENGTH_16 (4 << 16) /* CSR Base Address Mask */ #define CSR_BA_MASK 0x0F8 #define CSR_MASK_128B 0x00000000 #define CSR_MASK_512KB 0x00040000 #define CSR_MASK_1MB 0x000C0000 #define CSR_MASK_2MB 0x001C0000 #define CSR_MASK_4MB 0x003C0000 #define CSR_MASK_8MB 0x007C0000 #define CSR_MASK_16MB 0x00FC0000 #define CSR_MASK_32MB 0x01FC0000 #define CSR_MASK_64MB 0x03FC0000 #define CSR_MASK_128MB 0x07FC0000 #define CSR_MASK_256MB 0x0FFC0000 #define CSR_BA_OFFSET 0x0FC /* SDRAM Base Address Mask */ #define SDRAM_BA_MASK 0x100 #define SDRAM_MASK_256KB 0x00000000 #define SDRAM_MASK_512KB 0x00040000 #define SDRAM_MASK_1MB 0x000C0000 #define SDRAM_MASK_2MB 0x001C0000 #define SDRAM_MASK_4MB 0x003C0000 #define SDRAM_MASK_8MB 0x007C0000 #define SDRAM_MASK_16MB 0x00FC0000 #define SDRAM_MASK_32MB 0x01FC0000 #define SDRAM_MASK_64MB 0x03FC0000 #define SDRAM_MASK_128MB 0x07FC0000 #define SDRAM_MASK_256MB 0x0FFC0000 #define SDRAM_WINDOW_DISABLE (1 << 31) #define SDRAM_BA_OFFSET 0x104 /* Expansion ROM Base Address Mask */ #define EXPANSION_ROM_BA_MASK 0x108 #define ROM_MASK_1MB 0x00000000 #define ROM_MASK_2MB 0x00100000 #define ROM_MASK_4MB 0x00300000 #define ROM_MASK_8MB 0x00700000 #define ROM_MASK_16MB 0x00F00000 #define ROM_WINDOW_DISABLE (1 << 31) /* SDRAM configuration */ #define SDRAM_TIMING 0x10C #define SDRAM_ARRAY_SIZE_0 0x0 #define SDRAM_ARRAY_SIZE_1MB 0x1 #define SDRAM_ARRAY_SIZE_2MB 0x2 #define SDRAM_ARRAY_SIZE_4MB 0x3 #define SDRAM_ARRAY_SIZE_8MB 0x4 #define SDRAM_ARRAY_SIZE_16MB 0x5 #define SDRAM_ARRAY_SIZE_32MB 0x6 #define SDRAM_ARRAY_SIZE_64MB 0x7 #define SDRAM_2_BANKS 0 #define SDRAM_4_BANKS (1 << 3) #define SDRAM_ADDRESS_MUX_SHIFT 4 #define SDRAM_ARRAY_BASE_SHIFT 20 #define SDRAM_ADDRESS_SIZE_0 0x110 #define SDRAM_ADDRESS_SIZE_1 0x114 #define SDRAM_ADDRESS_SIZE_2 0x118 #define SDRAM_ADDRESS_SIZE_3 0x11C /* I2O registers */ #define I2O_INBOUND_FREE_HEAD 0x120 #define I2O_INBOUND_POST_TAIL 0x124 #define I2O_OUTBOUND_POST_HEAD 0x128 #define I2O_OUTBOUND_FREE_TAIL 0x12c #define I2O_INBOUND_FREE_COUNT 0x130 #define I2O_OUTBOUND_POST_COUNT 0x134 #define I2O_INBOUND_POST_COUNT 0x138 /* Control register */ #define SA_CONTROL 0x13C #define INITIALIZE_COMPLETE (1 << 0) #define ASSERT_SERR (1 << 1) #define RECEIVED_SERR (1 << 3) #define SA_SDRAM_PARITY_ERROR (1 << 4) #define PCI_SDRAM_PARITY_ERROR (1 << 5) #define DMA_SDRAM_PARITY_ERROR (1 << 6) #define DISCARD_TIMER_EXPIRED (1 << 8) #define PCI_NOT_RESET (1 << 9) #define WATCHDOG_ENABLE (1 << 13) #define I2O_SIZE_256 (0 << 10) #define I2O_SIZE_512 (1 << 10) #define I2O_SIZE_1024 (2 << 10) #define I2O_SIZE_2048 (3 << 10) #define I2O_SIZE_4096 (4 << 10) #define I2O_SIZE_8192 (5 << 10) #define I2O_SIZE_16384 (6 << 10) #define I2O_SIZE_32768 (7 << 10) #define ROM_WIDTH_8 (3 << 14) #define ROM_WIDTH_16 (1 << 14) #define ROM_WIDTH_32 (2 << 14) #define ROM_ACCESS_TIME_SHIFT 16 #define ROM_BURST_TIME_SHIFT 20 #define ROM_TRISTATE_TIME_SHIFT 24 #define XCS_DIRECTION_SHIFT 28 #define PCI_CENTRAL_FUNCTION (1 << 31) #define PCI_ADDRESS_EXTENSION 0x140 #define PREFETCHABLE_MEM_RANGE 0x144 /* XBUS / PCI Arbiter registers */ #define XBUS_CYCLE_ARBITER 0x148 #define XBUS_CYCLE_0_SHIFT 0 #define XBUS_CYCLE_1_SHIFT 3 #define XBUS_CYCLE_2_SHIFT 6 #define XBUS_CYCLE_3_SHIFT 9 #define XBUS_CYCLE_STROBE_SHIFT 12 #define XBUS_PCI_ARBITER (1 << 23) #define XBUS_INT_IN_L0_LOW 0 #define XBUS_INT_IN_L0_HIGH (1 << 24) #define XBUS_INT_IN_L1_LOW 0 #define XBUS_INT_IN_L1_HIGH (1 << 25) #define XBUS_INT_IN_L2_LOW 0 #define XBUS_INT_IN_L2_HIGH (1 << 26) #define XBUS_INT_IN_L3_LOW 0 #define XBUS_INT_IN_L3_HIGH (1 << 27) #define XBUS_INT_XCS0_LOW 0 #define XBUS_INT_XCS0_HIGH (1 << 28) #define XBUS_INT_XCS1_LOW 0 #define XBUS_INT_XCS1_HIGH (1 << 29) #define XBUS_INT_XCS2_LOW 0 #define XBUS_INT_XCS2_HIGH (1 << 30) #define XBUS_PCI_INT_REQUEST (1 << 31) #define XBUS_IO_STROBE_MASK 0x14C #define XBUS_IO_STROBE_0_SHIFT 0 #define XBUS_IO_STROBE_2_SHIFT 8 #define XBUS_IO_STROBE_3_SHIFT 16 #define XBUS_IO_STROBE_4_SHIFT 24 #define DOORBELL_PCI_MASK 0x150 #define DOORBELL_SA_MASK 0x154 /* UART registers */ #define UART_DATA 0x160 #define UART_RX_STAT 0x164 #define UART_PARITY_ERROR 0x01 #define UART_FRAME_ERROR 0x02 #define UART_OVERRUN_ERROR 0x04 #define UART_RX_ERROR (UART_PARITY_ERROR | UART_FRAME_ERROR \ | UART_OVERRUN_ERROR) #define UART_H_UBRLCR 0x168 #define UART_BREAK 0x01 #define UART_PARITY_ENABLE 0x02 #define UART_ODD_PARITY 0x00 #define UART_EVEN_PARITY 0x04 #define UART_STOP_BITS_1 0x00 #define UART_STOP_BITS_2 0x08 #define UART_ENABLE_FIFO 0x10 #define UART_DATA_BITS_5 0x00 #define UART_DATA_BITS_6 0x20 #define UART_DATA_BITS_7 0x40 #define UART_DATA_BITS_8 0x60 #define UART_M_UBRLCR 0x16C #define UART_L_UBRLCR 0x170 #define UART_BRD(fclk, x) (((fclk) / 4 / 16 / x) - 1) #define UART_CONTROL 0x174 #define UART_ENABLE 0x01 #define UART_SIR_ENABLE 0x02 #define UART_IRDA_ENABLE 0x04 #define UART_FLAGS 0x178 #define UART_TX_BUSY 0x08 #define UART_RX_FULL 0x10 #define UART_TX_EMPTY 0x20 /* Interrupt numbers for IRQ and FIQ registers */ #define IRQ_RESERVED0 0x00 #define IRQ_SOFTINT 0x01 #define IRQ_SERIAL_RX 0x02 #define IRQ_SERIAL_TX 0x03 #define IRQ_TIMER_1 0x04 #define IRQ_TIMER_2 0x05 #define IRQ_TIMER_3 0x06 #define IRQ_TIMER_4 0x07 #define IRQ_IN_L0 0x08 #define IRQ_IN_L1 0x09 #define IRQ_IN_L2 0x0A #define IRQ_IN_L3 0x0B #define IRQ_XCS_L0 0x0C #define IRQ_XCS_L1 0x0D #define IRQ_XCS_L2 0x0E #define IRQ_DOORBELL 0x0F #define IRQ_DMA_1 0x10 #define IRQ_DMA_2 0x11 #define IRQ_PCI 0x12 #define IRQ_PMCSR 0x13 #define IRQ_RESERVED1 0x14 #define IRQ_RESERVED2 0x15 #define IRQ_BIST 0x16 #define IRQ_SERR 0x17 #define IRQ_SDRAM_PARITY 0x18 #define IRQ_I2O 0x19 #define IRQ_RESERVED3 0x1A #define IRQ_DISCARD_TIMER 0x1B #define IRQ_DATA_PARITY 0x1C #define IRQ_MASTER_ABORT 0x1D #define IRQ_TARGET_ABORT 0x1E #define IRQ_PARITY 0x1F /* IRQ and FIQ status / enable registers */ #define IRQ_STATUS 0x180 #define IRQ_RAW_STATUS 0x184 #define IRQ_ENABLE 0x188 #define IRQ_ENABLE_SET 0x188 #define IRQ_ENABLE_CLEAR 0x18c #define IRQ_SOFT 0x190 #define FIQ_STATUS 0x280 #define FIQ_RAW_STATUS 0x284 #define FIQ_ENABLE 0x288 #define FIQ_ENABLE_SET 0x288 #define FIQ_ENABLE_CLEAR 0x28c #define FIQ_SOFT 0x290 /* Timer registers */ /* Relative offsets and bases */ #define TIMER_LOAD 0x00 #define TIMER_VALUE 0x04 #define TIMER_CONTROL 0x08 #define TIMER_CLEAR 0x0C #define TIMER_1_BASE 0x300 #define TIMER_2_BASE 0x320 #define TIMER_3_BASE 0x340 #define TIMER_4_BASE 0x360 /* Control register bits */ #define TIMER_FCLK 0x00 #define TIMER_FCLK_16 0x04 #define TIMER_FCLK_256 0x08 #define TIMER_EXTERNAL 0x0C #define TIMER_MODE_FREERUN 0x00 #define TIMER_MODE_PERIODIC 0x40 #define TIMER_ENABLE 0x80 /* Maximum timer value */ #define TIMER_MAX_VAL 0x00FFFFFF /* Specific registers */ #define TIMER_1_LOAD 0x300 #define TIMER_1_VALUE 0x304 #define TIMER_1_CONTROL 0x308 #define TIMER_1_CLEAR 0x30C #define TIMER_2_LOAD 0x320 #define TIMER_2_VALUE 0x324 #define TIMER_2_CONTROL 0x328 #define TIMER_2_CLEAR 0x32C #define TIMER_3_LOAD 0x340 #define TIMER_3_VALUE 0x344 #define TIMER_3_CONTROL 0x348 #define TIMER_3_CLEAR 0x34C #define TIMER_4_LOAD 0x360 #define TIMER_4_VALUE 0x364 #define TIMER_4_CONTROL 0x368 #define TIMER_4_CLEAR 0x36C /* Miscellaneous definitions */ #ifndef FCLK #define FCLK 50000000 #endif