/* $NetBSD: if_eb.c,v 1.4 1996/03/27 21:49:31 mark Exp $ */ /* * Copyright (c) 1995 Mark Brinicombe * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Mark Brinicombe. * 4. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * RiscBSD kernel project * * if_eb.c * * EtherB device driver * * Created : 08/07/95 */ /* * SEEQ 80C04 device driver */ /* * Bugs/possible improvements: * - Does not currently support DMA * - Does not currently support multicasts * - Does not transmit multiple packets in one go */ #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #include "bpfilter.h" #if NBPFILTER > 0 #include #include #endif #include #include #include #include #include #include #include #define ETHER_MIN_LEN 64 #define ETHER_MAX_LEN 1514 #define ETHER_ADDR_LEN 6 #ifndef EB_TIMEOUT #define EB_TIMEOUT 60 #endif /*#define EB_TX_DEBUG*/ /*#define EB_RX_DEBUG*/ /*#define EB_DEBUG*/ /*#define EB_PACKET_DEBUG*/ /* for debugging convenience */ #ifdef EB_DEBUG #define dprintf(x) printf x #else #define dprintf(x) #endif #define MY_MANUFACTURER 0x53 #define MY_PODULE 0xe4 /* * per-line info and status */ struct eb_softc { struct device sc_dev; irqhandler_t sc_ih; int sc_irq; /* IRQ number */ podule_t *sc_podule; /* Our podule */ int sc_podule_number; /* Our podule number */ u_int sc_iobase; /* base I/O addr */ struct arpcom sc_arpcom; /* ethernet common */ char sc_pktbuf[EB_BUFSIZ]; /* frame buffer */ int sc_config1; /* Current config1 bits */ int sc_config2; /* Current config2 bits */ int sc_command; /* Current command bits */ int sc_irqclaimed; /* Whether we have an IRQ claimed */ int sc_rx_ptr; /* Receive buffer pointer */ int sc_tx_ptr; /* Transmit buffer pointer */ }; /* * prototypes */ static int ebintr __P((void *)); static int eb_init __P((struct eb_softc *)); static int eb_ioctl __P((struct ifnet *, u_long, caddr_t)); static void eb_start __P((struct ifnet *)); static void eb_watchdog __P((int)); static void eb_reinit __P((struct eb_softc *)); static void eb_chipreset __P((struct eb_softc *)); static void eb_ramtest __P((struct eb_softc *)); static int eb_stoptx __P((struct eb_softc *)); static int eb_stoprx __P((struct eb_softc *)); static void eb_stop __P((struct eb_softc *)); static void eb_writebuf __P((struct eb_softc *, u_char *, int, int)); static void eb_readbuf __P((struct eb_softc *, u_char *, int, int)); static void ebread __P((struct eb_softc *, caddr_t, int)); static struct mbuf *ebget __P((caddr_t, int, struct ifnet *)); static void eb_hardreset __P((struct eb_softc *)); static void ebgetpackets __P((struct eb_softc *)); static void ebtxpacket __P((struct eb_softc *)); int ebprobe __P((struct device *, void *, void *)); void ebattach __P((struct device *, struct device *, void *)); /* driver structure for autoconf */ struct cfattach eb_ca = { sizeof(struct eb_softc), ebprobe, ebattach }; struct cfdriver eb_cd = { NULL, "eb", DV_IFNET }; #if 0 /* * Dump the chip registers */ void ebdump(iobase) u_int iobase; { dprintf(("%08x: %04x %04x %04x %04x %04x %04x %04x %04x\n", iobase, ReadShort(iobase + 0x00), ReadShort(iobase + 0x40), ReadShort(iobase + 0x80), ReadShort(iobase + 0xc0), ReadShort(iobase + 0x100), ReadShort(iobase + 0x140), ReadShort(iobase + 0x180), ReadShort(iobase + 0x1c0))); } #endif /* * Dump the interface buffer */ void eb_dump_buffer(sc, offset) struct eb_softc *sc; int offset; { #ifdef EB_PACKET_DEBUG u_int iobase = sc->sc_iobase; int addr; int loop; int size; int ctrl; int ptr; addr = offset; do { WriteShort(sc->sc_iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_FIFO_READ); WriteShort(iobase + EB_8004_CONFIG1, sc->sc_config1 | EB_BUFCODE_LOCAL_MEM); WriteShort(iobase + EB_8004_DMA_ADDR, addr); ptr = ReadShort(iobase + EB_8004_BUFWIN); ctrl = ReadShort(iobase + EB_8004_BUFWIN); ptr = ((ptr & 0xff) << 8) | ((ptr >> 8) & 0xff); if (ptr == 0) break; size = ptr - addr; printf("addr=%04x size=%04x ", addr, size); printf("cmd=%02x st=%02x\n", ctrl & 0xff, ctrl >> 8); for (loop = 0; loop < size - 4; loop += 2) printf("%04x ", ReadShort(iobase + EB_8004_BUFWIN)); printf("\n"); addr = ptr; } while (size != 0); #endif } /* * Probe routine. */ /* * int ebprobe(struct device *parent, void *match, void *aux) * * Probe for the ether3 podule. */ int ebprobe(parent, match, aux) struct device *parent; void *match; void *aux; { struct podule_attach_args *pa = (void *)aux; int podule; u_int iobase; /* dprintf(("Probing for SEEQ 8004... \n"));*/ /* Look for a network slot interface */ podule = findpodule(MY_MANUFACTURER, MY_PODULE, pa->pa_podule_number); /* Fail if we did not find it */ if (podule == -1) return(0); iobase = podules[podule].mod_base + EB_8004_BASE; /* Reset it - Why here ? */ WriteShort(iobase + EB_8004_CONFIG2, EB_CFG2_RESET); delay(100); /* We found it */ pa->pa_podule_number = podule; pa->pa_podule = &podules[podule]; return(1); } /* * void ebattach(struct device *parent, struct device *dev, void *aux) * * Attach podule. */ void ebattach(parent, self, aux) struct device *parent; struct device *self; void *aux; { struct eb_softc *sc = (void *)self; struct podule_attach_args *pa = (void *)aux; struct ifnet *ifp = &sc->sc_arpcom.ac_if; int loop; int sum; int id; /* dprintf(("Attaching %s...\n", sc->sc_dev.dv_xname));*/ /* Note the podule number and validate */ sc->sc_podule_number = pa->pa_podule_number; if (sc->sc_podule_number == -1) panic("Podule has disappeared !"); sc->sc_podule = &podules[sc->sc_podule_number]; podules[sc->sc_podule_number].attached = 1; /* Set the address of the controller for easy access */ sc->sc_iobase = sc->sc_podule->mod_base + EB_8004_BASE; sc->sc_irqclaimed = 0; /* Set up the interrupt structure */ sc->sc_ih.ih_func = ebintr; sc->sc_ih.ih_arg = sc; sc->sc_ih.ih_level = IPL_NET; sc->sc_ih.ih_name = "net: eb"; /* Claim either a network slot interrupt or a podule interrupt */ if (sc->sc_podule_number >= MAX_PODULES) sc->sc_irq = IRQ_NETSLOT; else sc->sc_irq = IRQ_PODULE /*+ sc->sc_podule_number*/; /* Stop the board. */ eb_chipreset(sc); eb_stoptx(sc); eb_stoprx(sc); /* Initialise ifnet structure. */ ifp->if_unit = sc->sc_dev.dv_unit; ifp->if_name = eb_cd.cd_name; ifp->if_start = eb_start; ifp->if_ioctl = eb_ioctl; ifp->if_watchdog = eb_watchdog; ifp->if_flags = IFF_BROADCAST | IFF_NOTRAILERS; /* Now we can attach the interface. */ /* dprintf(("Attaching interface...\n"));*/ if_attach(ifp); ether_ifattach(ifp); /* Read the station address - the receiver must be off */ WriteShort(sc->sc_iobase + EB_8004_CONFIG1, EB_BUFCODE_STATION_ADDR); for (sum = 0, loop = 0; loop < ETHER_ADDR_LEN; ++loop) { sc->sc_arpcom.ac_enaddr[loop] = ReadByte(sc->sc_iobase + EB_8004_BUFWIN); sum += sc->sc_arpcom.ac_enaddr[loop]; } /* * Hard code the ether address if we don't have one. * Build the address from the machine id. */ if (sum == 0) { sc->sc_arpcom.ac_enaddr[0] = 0x00; sc->sc_arpcom.ac_enaddr[1] = 0x00; sc->sc_arpcom.ac_enaddr[2] = bootconfig.machine_id[3]; sc->sc_arpcom.ac_enaddr[3] = bootconfig.machine_id[2]; sc->sc_arpcom.ac_enaddr[4] = bootconfig.machine_id[1]; sc->sc_arpcom.ac_enaddr[5] = bootconfig.machine_id[0]; } /* Get the product ID */ WriteShort(sc->sc_iobase + EB_8004_CONFIG1, EB_BUFCODE_PRODUCTID); id = ReadByte(sc->sc_iobase + EB_8004_BUFWIN); /* Print out some information for the user. */ if ((id & 0xf0) == 0xa0) printf(" SEEQ80C04 rev %x address %s", id & 0x0f, ether_sprintf(sc->sc_arpcom.ac_enaddr)); else printf(" SEEQ???? rev %02x address %s", id, ether_sprintf(sc->sc_arpcom.ac_enaddr)); /* Finally, attach to bpf filter if it is present. */ #if NBPFILTER > 0 /* dprintf(("Attaching to BPF...\n"));*/ bpfattach(&ifp->if_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif /* Should test the RAM */ eb_ramtest(sc); /* dprintf(("ebattach() finished.\n"));*/ } /* * Test the RAM on the ethernet card. This does not work yet */ void eb_ramtest(sc) struct eb_softc *sc; { register u_int iobase = sc->sc_iobase; register int loop; register u_int sum = 0; /* dprintf(("eb_ramtest()\n"));*/ /* * Test the buffer memory on the board. * Write simple pattens to it and read them back. */ /* Set up the whole buffer RAM for writing */ WriteShort(iobase + EB_8004_CONFIG1, EB_BUFCODE_TX_EAP); WriteShort(iobase + EB_8004_BUFWIN, ((EB_BUFFER_SIZE >> 8) - 1)); WriteShort(iobase + EB_8004_TX_PTR, 0x0000); WriteShort(iobase + EB_8004_RX_PTR, EB_BUFFER_SIZE - 2); /* Set the write start address and write a pattern */ eb_writebuf(sc, NULL, 0x0000, 0); for (loop = 0; loop < EB_BUFFER_SIZE; loop += 2) WriteShort(iobase + EB_8004_BUFWIN, loop); /* Set the read start address and verify the pattern */ eb_readbuf(sc, NULL, 0x0000, 0); for (loop = 0; loop < EB_BUFFER_SIZE; loop += 2) if (ReadShort(iobase + EB_8004_BUFWIN) != loop) ++sum; if (sum != 0) dprintf(("sum=%d\n", sum)); /* Set the write start address and write a pattern */ eb_writebuf(sc, NULL, 0x0000, 0); for (loop = 0; loop < EB_BUFFER_SIZE; loop += 2) WriteShort(iobase + EB_8004_BUFWIN, loop ^ (EB_BUFFER_SIZE - 1)); /* Set the read start address and verify the pattern */ eb_readbuf(sc, NULL, 0x0000, 0); for (loop = 0; loop < EB_BUFFER_SIZE; loop += 2) if (ReadShort(iobase + EB_8004_BUFWIN) != (loop ^ (EB_BUFFER_SIZE - 1))) ++sum; if (sum != 0) dprintf(("sum=%d\n", sum)); /* Set the write start address and write a pattern */ eb_writebuf(sc, NULL, 0x0000, 0); for (loop = 0; loop < EB_BUFFER_SIZE; loop += 2) WriteShort(iobase + EB_8004_BUFWIN, 0xaa55); /* Set the read start address and verify the pattern */ eb_readbuf(sc, NULL, 0x0000, 0); for (loop = 0; loop < EB_BUFFER_SIZE; loop += 2) if (ReadShort(iobase + EB_8004_BUFWIN) != 0xaa55) ++sum; if (sum != 0) dprintf(("sum=%d\n", sum)); /* Set the write start address and write a pattern */ eb_writebuf(sc, NULL, 0x0000, 0); for (loop = 0; loop < EB_BUFFER_SIZE; loop += 2) WriteShort(iobase + EB_8004_BUFWIN, 0x55aa); /* Set the read start address and verify the pattern */ eb_readbuf(sc, NULL, 0x0000, 0); for (loop = 0; loop < EB_BUFFER_SIZE; loop += 2) if (ReadShort(iobase + EB_8004_BUFWIN) != 0x55aa) ++sum; if (sum != 0) dprintf(("sum=%d\n", sum)); /* Report */ if (sum == 0) printf(" %dK buffer RAM\n", EB_BUFFER_SIZE / 1024); else printf(" buffer RAM failed self test, %d faults\n", sum); } /* Claim an irq for the board */ void eb_claimirq(sc) struct eb_softc *sc; { /* Have we claimed one already ? */ if (sc->sc_irqclaimed) return; /* Claim it */ dprintf(("eb_claimirq(%d)\n", sc->sc_irq)); if (irq_claim(sc->sc_irq, &sc->sc_ih)) panic("Cannot install IRQ handler for IRQ %d", sc->sc_irq); sc->sc_irqclaimed = 1; } /* Release an irq */ void eb_releaseirq(sc) struct eb_softc *sc; { /* Have we claimed one ? */ if (!sc->sc_irqclaimed) return; dprintf(("eb_releaseirq(%d)\n", sc->sc_irq)); if (irq_release(sc->sc_irq, &sc->sc_ih)) panic("Cannot release IRQ handler for IRQ %d", sc->sc_irq); sc->sc_irqclaimed = 0; } /* * Stop and reinitialise the interface. */ static void eb_reinit(sc) struct eb_softc *sc; { int s; dprintf(("eb_reinit()\n")); /* Stop and reinitialise the interface */ s = splimp(); eb_stop(sc); eb_init(sc); (void)splx(s); } /* * Stop the tx interface. * * Returns 0 if the tx was already stopped or 1 if it was active */ static int eb_stoptx(sc) struct eb_softc *sc; { u_int iobase = sc->sc_iobase; int timeout; int status; dprintf(("eb_stoptx()\n")); status = ReadShort(iobase + EB_8004_STATUS); if (!(status & EB_STATUS_TX_ON)) return(0); /* Stop any tx and wait for confirmation */ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_TX_OFF); timeout = 20000; do { status = ReadShort(iobase + EB_8004_STATUS); } while ((status & EB_STATUS_TX_ON) && --timeout > 0); if (timeout == 0) dprintf(("eb_stoptx: timeout waiting for tx termination\n")); /* Clear any pending tx interrupt */ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_TX_INTACK); return(1); } /* * Stop the rx interface. * * Returns 0 if the tx was already stopped or 1 if it was active */ static int eb_stoprx(sc) struct eb_softc *sc; { u_int iobase = sc->sc_iobase; int timeout; int status; dprintf(("eb_stoprx()\n")); status = ReadShort(iobase + EB_8004_STATUS); if (!(status & EB_STATUS_RX_ON)) return(0); /* Stop any rx and wait for confirmation */ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_RX_OFF); timeout = 20000; do { status = ReadShort(iobase + EB_8004_STATUS); } while ((status & EB_STATUS_RX_ON) && --timeout > 0); if (timeout == 0) dprintf(("eb_stoprx: timeout waiting for rx termination\n")); /* Clear any pending rx interrupt */ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_RX_INTACK); return(1); } /* * Stop interface. * Stop all IO and shut the interface down */ static void eb_stop(sc) struct eb_softc *sc; { u_int iobase = sc->sc_iobase; dprintf(("eb_stop()\n")); /* Stop all IO */ eb_stoptx(sc); eb_stoprx(sc); /* Disable rx and tx interrupts */ sc->sc_command &= (EB_CMD_RX_INTEN | EB_CMD_TX_INTEN); /* Clear any pending interrupts */ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_RX_INTACK | EB_CMD_TX_INTACK | EB_CMD_TEST_INTACK | EB_CMD_BW_INTACK); dprintf(("st=%08x", ReadShort(iobase + EB_8004_STATUS))); /* Release the irq */ eb_releaseirq(sc); /* Put the chip to sleep */ WriteShort(iobase + EB_8004_CONFIG1, EB_BUFCODE_CONFIG3); WriteShort(iobase + EB_8004_BUFWIN, EB_CFG3_SLEEP); /* Cancel any watchdog timer */ sc->sc_arpcom.ac_if.if_timer = 0; } /* * Reset the chip * Following this the software registers are reset */ static void eb_chipreset(sc) struct eb_softc *sc; { u_int iobase = sc->sc_iobase; dprintf(("eb_chipreset()\n")); /* Reset the controller. Min of 4us delay here */ WriteShort(iobase + EB_8004_CONFIG2, EB_CFG2_RESET); delay(100); sc->sc_command = 0; sc->sc_config1 = 0; sc->sc_config2 = 0; } /* * Do a hardware reset of the board, and upload the ethernet address again in * case the board forgets. */ static void eb_hardreset(sc) struct eb_softc *sc; { u_int iobase = sc->sc_iobase; int loop; dprintf(("eb_hardreset()\n")); /* Stop any activity */ eb_stoptx(sc); eb_stoprx(sc); eb_chipreset(sc); /* Set up defaults for the registers */ sc->sc_config2 = 0; WriteShort(iobase + EB_8004_CONFIG2, sc->sc_config2); sc->sc_command = 0x00; sc->sc_config1 = 0; WriteShort(iobase + EB_8004_CONFIG1, sc->sc_config1); WriteShort(iobase + EB_8004_COMMAND, sc->sc_command); WriteShort(iobase + EB_8004_CONFIG1, EB_BUFCODE_TX_EAP); WriteShort(iobase + EB_8004_BUFWIN, ((EB_TX_BUFFER_SIZE >> 8) - 1)); /* Write the station address - the receiver must be off */ WriteShort(sc->sc_iobase + EB_8004_CONFIG1, sc->sc_config1 | EB_BUFCODE_STATION_ADDR); for (loop = 0; loop < ETHER_ADDR_LEN; ++loop) { WriteByte(sc->sc_iobase + EB_8004_BUFWIN, sc->sc_arpcom.ac_enaddr[loop]); } } /* * write to the buffer memory on the interface * * If addr is within range for the interface buffer then the buffer * address is set to addr. * If len != 0 then data is copied from the address starting at buf * to the interface buffer. */ static void eb_writebuf(sc, buf, addr, len) struct eb_softc *sc; u_char *buf; int addr; int len; { u_int iobase = sc->sc_iobase; int loop; int timeout; dprintf(("writebuf: st=%04x\n", ReadShort(iobase + EB_8004_STATUS))); /* If we have a valid buffer address set the buffer pointer and direction */ if (addr >= 0 && addr < EB_BUFFER_SIZE) { WriteShort(iobase + EB_8004_CONFIG1, sc->sc_config1 | EB_BUFCODE_LOCAL_MEM); WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_FIFO_WRITE); /* Should wait here of FIFO empty flag */ timeout = 20000; while ((ReadShort(iobase + EB_8004_STATUS) & EB_STATUS_FIFO_EMPTY) == 0 && --timeout > 0); WriteShort(iobase + EB_8004_DMA_ADDR, addr); } for (loop = 0; loop < len; loop += 2) WriteShort(iobase + EB_8004_BUFWIN, buf[loop] | buf[loop + 1] << 8); /* if (len > 0) outsw(iobase + EB_8004_BUFWIN, buf, len / 2);*/ } /* * read from the buffer memory on the interface * * If addr is within range for the interface buffer then the buffer * address is set to addr. * If len != 0 then data is copied from the interface buffer to the * address starting at buf. */ static void eb_readbuf(sc, buf, addr, len) struct eb_softc *sc; u_char *buf; int addr; int len; { u_int iobase = sc->sc_iobase; int loop; int word; int timeout; dprintf(("readbuf: st=%04x addr=%04x len=%d\n", ReadShort(iobase + EB_8004_STATUS), addr, len)); /* If we have a valid buffer address set the buffer pointer and direction */ if (addr >= 0 && addr < EB_BUFFER_SIZE) { if ((ReadShort(iobase + EB_8004_STATUS) & EB_STATUS_FIFO_DIR) == 0) { /* Should wait here of FIFO empty flag */ timeout = 20000; while ((ReadShort(iobase + EB_8004_STATUS) & EB_STATUS_FIFO_EMPTY) == 0 && --timeout > 0); } WriteShort(iobase + EB_8004_CONFIG1, sc->sc_config1 | EB_BUFCODE_LOCAL_MEM); WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_FIFO_WRITE); /* Should wait here of FIFO empty flag */ timeout = 20000; while ((ReadShort(iobase + EB_8004_STATUS) & EB_STATUS_FIFO_EMPTY) == 0 && --timeout > 0); WriteShort(iobase + EB_8004_DMA_ADDR, addr); WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_FIFO_READ); /* Should wait here of FIFO full flag */ timeout = 20000; while ((ReadShort(iobase + EB_8004_STATUS) & EB_STATUS_FIFO_FULL) == 0 && --timeout > 0); } for (loop = 0; loop < len; loop += 2) { word = ReadShort(iobase + EB_8004_BUFWIN); buf[loop] = word & 0xff; buf[loop + 1] = word >> 8; } /* if (len > 0) insw(iobase + EB_8004_BUFWIN, buf, len / 2);*/ } /* * Initialize interface. * * This should leave the interface in a state for packet reception and transmission */ static int eb_init(sc) struct eb_softc *sc; { struct ifnet *ifp = &sc->sc_arpcom.ac_if; u_int iobase = sc->sc_iobase; int s; dprintf(("eb_init()\n")); s = splimp(); /* Grab an irq */ eb_claimirq(sc); /* First, reset the board. */ eb_hardreset(sc); /* Configure rx. */ dprintf(("Configuring rx...\n")); if (ifp->if_flags & IFF_PROMISC) sc->sc_config1 = EB_CFG1_PROMISCUOUS; else sc->sc_config1 = EB_CFG1_BROADCAST; sc->sc_config1 |= 0; WriteShort(iobase + EB_8004_CONFIG1, sc->sc_config1); /* Configure TX. */ dprintf(("Configuring tx...\n")); WriteShort(iobase + EB_8004_CONFIG1, sc->sc_config1 | EB_BUFCODE_TX_EAP); WriteShort(iobase + EB_8004_BUFWIN, ((EB_TX_BUFFER_SIZE >> 8) - 1)); WriteShort(iobase + EB_8004_TX_PTR, 0x0000); sc->sc_config2 |= (EB_CFG2_OUTPUT | EB_CFG2_RX_TX_DISABLE); WriteShort(iobase + EB_8004_CONFIG2, sc->sc_config2); /* Place a NULL header at the beginning of the transmit area */ eb_writebuf(sc, NULL, 0x0000, 0); WriteShort(iobase + EB_8004_BUFWIN, 0x0000); WriteShort(iobase + EB_8004_BUFWIN, 0x0000); sc->sc_command |= EB_CMD_TX_INTEN; WriteShort(iobase + EB_8004_COMMAND, sc->sc_command); /* Setup the Rx pointers */ sc->sc_rx_ptr = EB_TX_BUFFER_SIZE; WriteShort(iobase + EB_8004_RX_PTR, sc->sc_rx_ptr); WriteShort(iobase + EB_8004_RX_END, (sc->sc_rx_ptr >> 8)); /* Place a NULL header at the beginning of the receive area */ eb_writebuf(sc, NULL, sc->sc_rx_ptr, 0); WriteShort(iobase + EB_8004_BUFWIN, 0x0000); WriteShort(iobase + EB_8004_BUFWIN, 0x0000); /* Turn on Rx */ sc->sc_command |= EB_CMD_RX_INTEN; WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_RX_ON); /* Set flags appropriately. */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; dprintf(("init: st=%04x\n", ReadShort(iobase + EB_8004_STATUS))); /* And start output. */ eb_start(ifp); (void)splx(s); return(0); } /* * Start output on interface. Get datagrams from the queue and output them, * giving the receiver a chance between datagrams. Call only from splimp or * interrupt level! */ static void eb_start(ifp) struct ifnet *ifp; { struct eb_softc *sc = eb_cd.cd_devs[ifp->if_unit]; int s; s = splimp(); #ifdef EB_TX_DEBUG dprintf(("eb_start()...\n")); #endif /* Don't do anything if output is active. */ if (sc->sc_arpcom.ac_if.if_flags & IFF_OACTIVE) return; /* Mark interface as output active */ sc->sc_arpcom.ac_if.if_flags |= IFF_OACTIVE; /* tx packets */ ebtxpacket(sc); (void)splx(s); } /* * Transfer a packet to the interface buffer and start transmission * * Called at splimp() */ void ebtxpacket(sc) struct eb_softc *sc; { u_int iobase = sc->sc_iobase; struct mbuf *m, *m0; int len; /* Dequeue the next datagram. */ IF_DEQUEUE(&sc->sc_arpcom.ac_if.if_snd, m0); /* If there's nothing to send, return. */ if (!m0) { sc->sc_arpcom.ac_if.if_flags &= ~IFF_OACTIVE; sc->sc_config2 |= EB_CFG2_OUTPUT; WriteShort(iobase + EB_8004_CONFIG2, sc->sc_config2); #ifdef EB_TX_DEBUG dprintf(("tx finished\n")); #endif return; } /* Give the packet to the bpf, if any. */ #if NBPFILTER > 0 if (sc->sc_arpcom.ac_if.if_bpf) bpf_mtap(sc->sc_arpcom.ac_if.if_bpf, m0); #endif #ifdef EB_TX_DEBUG dprintf(("Tx new packet\n")); #endif /* * Copy the datagram to the temporary buffer. * * Eventually we may as well just copy straight into the interface buffer */ len = 0; for (m = m0; m; m = m->m_next) { if (m->m_len == 0) continue; bcopy(mtod(m, caddr_t), sc->sc_pktbuf + len, m->m_len); len += m->m_len; } m_freem(m0); /* If packet size is odd round up to the next 16 bit boundry */ if (len % 2) ++len; len = max(len, ETHER_MIN_LEN); if (len > ETHER_MAX_LEN) log(LOG_WARNING, "ea: oversize packet = %d bytes\n", len); /* Ok we now have a packet len bytes long in our packet buffer */ /* Transfer datagram to board. */ #ifdef EB_TX_DEBUG dprintf(("eb: xfr pkt length=%d...\n", len)); dprintf(("%s-->", ether_sprintf(sc->sc_pktbuf+6))); dprintf(("%s\n", ether_sprintf(sc->sc_pktbuf))); #endif sc->sc_config2 &= ~EB_CFG2_OUTPUT; WriteShort(iobase + EB_8004_CONFIG2, sc->sc_config2); /* dprintf(("st=%04x\n", ReadShort(iobase + EB_8004_STATUS)));*/ /* Write the packet to the interface buffer, skipping the packet header */ eb_writebuf(sc, sc->sc_pktbuf, 0x0004, len); /* Follow it with a NULL packet header */ WriteShort(iobase + EB_8004_BUFWIN, 0x00); WriteShort(iobase + EB_8004_BUFWIN, 0x00); /* Write the packet header */ eb_writebuf(sc, NULL, 0x0000, 0); WriteShort(iobase + EB_8004_BUFWIN, (((len+4) & 0xff00) >> 8) | (((len+4) & 0xff) << 8)); WriteShort(iobase + EB_8004_BUFWIN, 0x00aa); WriteShort(iobase + EB_8004_TX_PTR, 0x0000); /* dprintf(("st=%04x\n", ReadShort(iobase + EB_8004_STATUS)));*/ #ifdef EB_DEBUG eb_dump_buffer(sc, 0); #endif /* Now transmit the datagram. */ /* dprintf(("st=%04x\n", ReadShort(iobase + EB_8004_STATUS)));*/ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_TX_ON); #ifdef EB_TX_DEBUG dprintf(("st=%04x\n", ReadShort(iobase + EB_8004_STATUS))); dprintf(("tx: queued\n")); #endif } /* * Ethernet controller interrupt. */ int ebintr(arg) void *arg; { register struct eb_softc *sc = arg; u_int iobase = sc->sc_iobase; int status, s; u_int txstatus; dprintf(("ebintr: ")); /* Get the controller status */ status = ReadShort(iobase + EB_8004_STATUS); dprintf(("st=%04x ", status)); /* Tx interrupt ? */ if (status & EB_STATUS_TX_INT) { dprintf(("txint ")); /* Acknowledge the interrupt */ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_TX_INTACK); eb_readbuf(sc, (u_char *)&txstatus, 0x0000, 4); #ifdef EB_TX_DEBUG dprintf(("txstatus=%08x\n", txstatus)); #endif txstatus = (txstatus >> 24) & 0xff; /* * Did it succeed ? Did we collide ? * * The exact proceedure here is not clear. We should get * an interrupt on a sucessfull tx or on a collision. * The done flag is set after successfull tx or 16 collisions * We should thus get a interrupt for each of collision * and the done bit should not be set. However it does appear * to be set at the same time as the collision bit ... * * So we will count collisions and output errors and will assume * that if the done bit is set the packet was transmitted. * Stats may be wrong if 16 collisions occur on a packet * as the done flag should be set but the packet may not have been * transmitted. so the output count might not require incrementing * if the 16 collisions flags is set. I don;t know abou this until * it happens. */ if (txstatus & EB_TXHDR_COLLISION) { sc->sc_arpcom.ac_if.if_collisions++; } else if (txstatus & EB_TXHDR_ERROR_MASK) { sc->sc_arpcom.ac_if.if_oerrors++; } /* if (txstatus & EB_TXHDR_ERROR_MASK) { log(LOG_WARNING, "tx packet error =%02x\n", txstatus); }*/ if (txstatus & EB_PKTHDR_DONE) { sc->sc_arpcom.ac_if.if_opackets++; /* Tx next packet */ s = splimp(); ebtxpacket(sc); (void)splx(s); } } /* Rx interrupt ? */ if (status & EB_STATUS_RX_INT) { dprintf(("rxint ")); /* Acknowledge the interrupt */ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_RX_INTACK); /* Install a watchdog timer needed atm to fixed rx lockups */ sc->sc_arpcom.ac_if.if_timer = EB_TIMEOUT; /* Processes the received packets */ ebgetpackets(sc); /* Make sure the receiver is on */ /* if ((status & EB_STATUS_RX_ON) == 0) { WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_RX_ON); printf("rxintr: rx is off st=%04x\n",status); }*/ } #ifdef EB_DEBUG status = ReadShort(iobase + EB_8004_STATUS); dprintf(("st=%04x\n", status)); #endif return(0); } void ebgetpackets(sc) struct eb_softc *sc; { u_int iobase = sc->sc_iobase; int addr; int len; int ctrl; int ptr; int pack; int status; u_int rxstatus; /* We start from the last rx pointer position */ addr = sc->sc_rx_ptr; sc->sc_config2 &= ~EB_CFG2_OUTPUT; WriteShort(iobase + EB_8004_CONFIG2, sc->sc_config2); do { /* Read rx header */ eb_readbuf(sc, (u_char *)&rxstatus, addr, 4); /* Split the packet header */ ptr = ((rxstatus & 0xff) << 8) | ((rxstatus >> 8) & 0xff); ctrl = (rxstatus >> 16) & 0xff; status = (rxstatus >> 24) & 0xff; #ifdef EB_RX_DEBUG dprintf(("addr=%04x ptr=%04x ctrl=%02x status=%02x\n", addr, ptr, ctrl, status)); #endif /* Zero packet ptr ? then must be null header so exit */ if (ptr == 0) break; /* Get packet length */ len = (ptr - addr) - 4; if (len < 0) { len += EB_RX_BUFFER_SIZE; } #ifdef EB_RX_DEBUG dprintf(("len=%04x\n", len)); #endif /* Has the packet rx completed ? if not then exit */ if ((status & EB_PKTHDR_DONE) == 0) break; /* Did we have any errors ? then note error and go to next packet */ if (status & 0x0f) { ++sc->sc_arpcom.ac_if.if_ierrors; printf("rx packet error (%02x) - dropping packet\n", status & 0x0f); /* sc->sc_config2 |= EB_CFG2_OUTPUT; WriteShort(iobase + EB_8004_CONFIG2, sc->sc_config2); eb_reinit(sc); return; */ addr = ptr; continue; } /* Is the packet too big ? - this will probably be trapped above as a receive error */ if (len > ETHER_MAX_LEN) { ++sc->sc_arpcom.ac_if.if_ierrors; printf("rx packet size error len=%d\n", len); /* sc->sc_config2 |= EB_CFG2_OUTPUT; WriteShort(iobase + EB_8004_CONFIG2, sc->sc_config2); eb_reinit(sc); return;*/ addr = ptr; continue; } eb_readbuf(sc, sc->sc_pktbuf, addr + 4, len); #ifdef EB_RX_DEBUG dprintf(("%s-->", ether_sprintf(sc->sc_pktbuf+6))); dprintf(("%s\n", ether_sprintf(sc->sc_pktbuf))); #endif sc->sc_arpcom.ac_if.if_ipackets++; /* Pass data up to upper levels. */ ebread(sc, (caddr_t)sc->sc_pktbuf, len); addr = ptr; ++pack; } while (len != 0); sc->sc_config2 |= EB_CFG2_OUTPUT; WriteShort(iobase + EB_8004_CONFIG2, sc->sc_config2); #ifdef EB_RX_DEBUG dprintf(("new rx ptr=%04x\n", addr)); #endif /* Store new rx pointer */ sc->sc_rx_ptr = addr; WriteShort(iobase + EB_8004_RX_END, (sc->sc_rx_ptr >> 8)); /* Make sure the receiver is on */ WriteShort(iobase + EB_8004_COMMAND, sc->sc_command | EB_CMD_RX_ON); } /* * Pass a packet up to the higher levels. */ static void ebread(sc, buf, len) struct eb_softc *sc; caddr_t buf; int len; { register struct ether_header *eh; struct mbuf *m; eh = (struct ether_header *)buf; len -= sizeof(struct ether_header); if (len <= 0) return; /* Pull packet off interface. */ m = ebget(buf, len, &sc->sc_arpcom.ac_if); if (m == 0) return; #if NBPFILTER > 0 /* * Check if there's a BPF listener on this interface. * If so, hand off the raw packet to bpf. */ if (sc->sc_arpcom.ac_if.if_bpf) { bpf_tap(sc->sc_arpcom.ac_if.if_bpf, buf, len + sizeof(struct ether_header)); /* bpf_mtap(sc->sc_arpcom.ac_if.if_bpf, m);*/ } #endif ether_input(&sc->sc_arpcom.ac_if, eh, m); } /* * Pull read data off a interface. Len is length of data, with local net * header stripped. We copy the data into mbufs. When full cluster sized * units are present we copy into clusters. */ struct mbuf * ebget(buf, totlen, ifp) caddr_t buf; int totlen; struct ifnet *ifp; { struct mbuf *top, **mp, *m; int len; register caddr_t cp = buf; char *epkt; buf += sizeof(struct ether_header); cp = buf; epkt = cp + totlen; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == 0) return 0; m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = totlen; m->m_len = MHLEN; top = 0; mp = ⊤ while (totlen > 0) { if (top) { MGET(m, M_DONTWAIT, MT_DATA); if (m == 0) { m_freem(top); return 0; } m->m_len = MLEN; } len = min(totlen, epkt - cp); if (len >= MINCLSIZE) { MCLGET(m, M_DONTWAIT); if (m->m_flags & M_EXT) m->m_len = len = min(len, MCLBYTES); else len = m->m_len; } else { /* * Place initial small packet/header at end of mbuf. */ if (len < m->m_len) { if (top == 0 && len + max_linkhdr <= m->m_len) m->m_data += max_linkhdr; m->m_len = len; } else len = m->m_len; } bcopy(cp, mtod(m, caddr_t), (unsigned)len); cp += len; *mp = m; mp = &m->m_next; totlen -= len; if (cp == epkt) cp = buf; } return top; } /* * Process an ioctl request. This code needs some work - it looks pretty ugly. */ static int eb_ioctl(ifp, cmd, data) register struct ifnet *ifp; u_long cmd; caddr_t data; { struct eb_softc *sc = eb_cd.cd_devs[ifp->if_unit]; struct ifaddr *ifa = (struct ifaddr *)data; /* struct ifreq *ifr = (struct ifreq *)data;*/ int s, error = 0; s = splimp(); if ((error = ether_ioctl(ifp, &sc->sc_arpcom, cmd, data)) > 0) { splx(s); return error; } switch (cmd) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; dprintf(("if_flags=%08x\n", ifp->if_flags)); switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: arp_ifinit(&sc->sc_arpcom, ifa); dprintf(("Interface eb is coming up (AF_INET)\n")); eb_init(sc); break; #endif default: dprintf(("Interface eb is coming up (default)\n")); eb_init(sc); break; } break; case SIOCSIFFLAGS: dprintf(("if_flags=%08x\n", ifp->if_flags)); if ((ifp->if_flags & IFF_UP) == 0 && (ifp->if_flags & IFF_RUNNING) != 0) { /* * If interface is marked down and it is running, then * stop it. */ dprintf(("Interface ea is stopping\n")); eb_stop(sc); ifp->if_flags &= ~IFF_RUNNING; } else if ((ifp->if_flags & IFF_UP) != 0 && (ifp->if_flags & IFF_RUNNING) == 0) { /* * If interface is marked up and it is stopped, then * start it. */ dprintf(("Interface eb is restarting(1)\n")); eb_init(sc); } else { /* * Some other important flag might have changed, so * reset. */ dprintf(("Interface eb is reinitialising\n")); eb_reinit(sc); } break; default: error = EINVAL; break; } (void)splx(s); return error; } /* * Device timeout routine. * * Ok I am not sure exactly how the device timeout should work.... * Currently what will happens is that that the device timeout is only * set when a packet it received. This indicates we are on an active * network and thus we should expect more packets. If non arrive in * in the timeout period then we reinitialise as we may have jammed. * We zero the timeout at this point so that we don't end up with * an endless stream of timeouts if the network goes down. */ static void eb_watchdog(unit) int unit; { struct eb_softc *sc = eb_cd.cd_devs[unit]; log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname); sc->sc_arpcom.ac_if.if_oerrors++; dprintf(("eb_watchdog: ")); dprintf(("st=%04x\n", ReadShort(sc->sc_iobase + EB_8004_STATUS))); /* Kick the interface */ eb_reinit(sc); sc->sc_arpcom.ac_if.if_timer = 0; } /* End of if_ea.c */